Hydrolysis of poly(l-lactic acid) using microwave irradiation

Poly(l-lactic acid) (PLLA) was hydrolyzed using microwave irradiation, and yields of the resultant lactic acid and reaction time were compared with those obtained by conventional heating. In both cases, the reaction temperature was maintained at 170 °C and the weight ratio of PLLA:H₂O was 3:1. Under conventional heating, the lactic acid yield reached saturation after 800 min at 45%, whereas only 120 min was required to reach the same yield level under microwave irradiation. The optical purity under conventional heating decreased with hydrolysis of the PLLA and dropped to 94%ee when the lactic acid yield reached at 45%. Under microwave irradiation, however, the optical purity decreased only after the equilibrium state of hydrolysis was attained. Therefore, to maintain the optical purity at 98%ee, it was necessary to stop microwave irradiation when the lactic acid yield reached 45%.     

Microwave-assisted Polymerization of D,L-Lactide with Stannous Octanoate as Catalyst

Poly (lactic acid) (PLA) is an important member of the polyesters which are used as biomedical materials in bioresorbable suture, implantates and drug controlled release systems1. PLA is prepared by two routs2: ring-opening polymerization of dimeric cyclic lactide or direct polycondensation of lactic acid. The ring-opening polymerization has attracted much more scientific and industrial interests than the later one, but both methods need long time for the polymerization reactions to be compl…     

Preparation and characterization of optically active and organosoluble poly(amide‐imide)s from polycondensation reaction of N,N′‐(4,4′‐sulphonediphthaloyl)‐bis‐L‐isoleucine diacid with aromatic diamines

3,3′,4,4′‐Diphenylsulfonetetracarboxylic dianhydride (1) was reacted with L ‐isoleucine (2) in acetic acid and the resulting imide‐acid (3) was obtained in high yield. The diacid chloride (4) was prepared from the diacid derivative (3) by reaction with thionyl chloride. The polycondensation reaction of diacid chloride (4) with several aromatic diamines such as 4,4′‐sulfonyldianiline (5a), 4,4′‐diaminodiphenyl methane (5b), 4,4′‐diaminodiphenylether (5c), p‐phenylenediamine (5d),m‐phenylenediamine (5e), 2,4‐diaminotoluene (5f) and 4,4′‐diaminobiphenyl (5g) was performed by two conventional methods: low temperature solution polycondensation and short period reflux conditions. In order to compare conventional solution polycondensation reaction methods with microwave‐assisted polycondensation, the reactions were also carried out under microwave conditions with a small amount of o‐cresol that acts as a primary microwave absorber. The reaction mixture was irradiated for 6 min with 100% of radiation power. Several new optically active poly(amide‐imide)s with inherent viscosity ranging from 0.23 to 0.41 dl/g were obtained with high yield. All of the earlier polymers were fully characterized by IR, elemental analyses and specific rotation techniques. Some structural characterizations and physical properties of these new optically active poly(amide‐imide)s are reported. Copyright © 2005 John Wiley & Sons, Ltd.     

Synthesis and properties of multiblock copolymers consisting of poly(L‐lactic acid) and poly(oxypropylene‐ co‐oxyethylene) prepared by direct polycondensation

A multiblock copoly(ester–ether) consisting of poly(l ‐lactic acid) (PLLA) and poly(oxypropylene‐co‐oxyethylene) (PN) was prepared and characterized. Preparation was done via the solution polycondensation of a thermal oligocondensate of l ‐lactic acid, a commercially available telechelic polyether (PN: Pluronic‐F68), and dodecanedioic acid as a carboxyl/hydroxyl adjusting agent. When stannous oxide was used as the catalyst, the molecular weight of the resultant PLLA/PN block copolymers became very high (even with a high PN content) under optimized reaction conditions. The refluxing of diphenyl ether (solvent) at reduced pressure allowed the efficient removal of the condensed water from the reaction system and the feed‐back of the intermediately formed l ‐lactide at the same time in order to successfully bring about a high degree of condensation. The copolymer films obtained by solution casting became more flexible with the increasing PN content as soft segments. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1513–1521, 1999     

Enantioselective analysis of bambuterol in human plasma using microwave‐assisted chiral derivatization coupled with ultra high performance liquid chromatography and tandem mass spectrometry

In this study, an enantioselective analytical method based on microwave‐assisted chiral derivatization coupled with ultra high performance liquid chromatography and tandem mass spectrometry was developed for the determination of bambuterol enantiomers in human plasma. The chiral derivatization reaction was greatly accelerated by microwave irradiation. Under the optimized conditions, both the derivatization time and separation time on column was only 3 min, and the lower limit of quantification was 2.5 pg/mL. The recoveries were in the range of 90.1–93.0% without significant matrix effect. Compared with the conventional heating chiral derivatization, microwave‐assisted chiral derivatization obtained higher chiral derivatization yields with much shorter time due to the effect of microwave irradiation. Furthermore, the racemization during the derivatization reaction was systematically investigated. The results showed the concentration of acetic acid and the reaction time had significant effects on the racemization, which could be well controlled during microwave‐assisted chiral derivatization for the short reaction time. Finally, this novel approach was demonstrated by determining bambuterol in human plasma of a clinical pharmacokinetic study in eight healthy volunteers. On the basis of the results, microwave‐assisted chiral derivatization coupled with ultra high performance liquid chromatography and tandem mass spectrometry as a simple and effective enantioselective analysis technique for the determination of chiral drugs in complex biological samples showed great promise.     

Synthesis and characterization of new optically active poly(amide‐imide)s containing epiclon and L‐methionine moieties in the main chain

Epiclon [3a,4,5,7a‐tetrahydro‐7‐methyl‐5‐(tetrahydro‐2,5‐dioxo‐3‐furanyl)‐1,3‐isobenzofurandione] (1) was reacted with L ‐methionine (2) in acetic acid and the resulting imide‐acid 3 was obtained in high yield. The diacid chloride 4 was prepared from diacid derivative 3 by reaction with thionyl chloride. Thermostable poly(amide‐imide)s containing epiclon structure were synthesized by reacting of diacid chloride 4 with various aromatic diamines. Polymerization reaction was performed by two conventional methods: low temperature solution polycondensation and short period reflux conditions. In order to compare conventional solution polycondensation reaction methods with microwave‐assisted polycondensation, the reactions were also carried out under microwave conditions with a small amount of o‐cresol that acts as a primary microwave absorber. The reaction mixture was irradiated for 6 min with 100% radiation power. Several new optically active poly(amide‐imide)s with inherent viscosity ranging from 0.15 to 0.36 dl/g were obtained with high yield. All of the above polymers were fully characterized by ¹H‐NMR, FT‐IR, elemental analyses and specific rotation techniques. Some structural characterizations and physical properties of these new optically active poly(amide‐imide)s are reported. Copyright © 2005 John Wiley & Sons, Ltd.     

Synthesis of poly(glycolic acid‐alt‐12‐aminododecanoic acid): The thermal polymerization kinetics of sodium N‐chloroacetyl‐12‐aminododecanoate

A new regular poly(ester amide) consisting of glycolic acid and 12‐aminododecanoic acid was synthesized by a thermal polycondensation method involving the formation of a metal halide salt. Polymerization could start in liquefied or solid phases, depending on the reaction temperature. The polymerization kinetics were investigated by isothermal and nonisothermal isoconversional methods. The reaction model was selected with both Coats–Redfern and isokinetic relationships. The activation energy was higher when the reaction took place mainly in the solid state. A compensation effect was found between the frequency factor and the activation energy. The thermal properties of the new polymer were studied as well as the isothermal crystallization from the melt state. Melt‐grown spherulites were studied by means of polarizing optical microscopy. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1199–1213, 2006     

Synthesis of Tetrahydrothiopyrano[2,3‐b]indole [60]Fullerene Derivatives via Hetero‐Diels–Alder Reaction of C60 and α,β‐Unsaturated Indole‐2‐thiones

Hetero‐Diels–Alder reactions of [60]fullerene with α,β‐unsaturated thio‐oxindoles ( 3a , 3b , 3c ), prepared from thio‐oxindole 1 and heteroaromatic aldehydes ( 2a , 2b , 2c ), to generate tetrahydrothiopyrano[2,3‐b ]indole [60]fullerene cycloadducts ( 5a , 5b , 5c ) under thermal or microwave irradiation were described. The yields were improved, and the reaction time was decreased by conducting the reaction under microwave irradiation.     

“讲一练二考三”理念在有机化学实验教学中的运用——以苯甲酸的制备为例

采用微波辐射及相转移催化剂改进了高锰酸钾氧化制备苯甲酸实验,系统研究了微波功率、反应温度、反应时间、反应物物质的量比、催化剂用量等因素对产率的影响,并同电热套加热方式进行了比较.结果表明,该反应的最佳条件为:微波辐射时间40 min,微波功率80 W,反应温度80℃,相转移催化剂氯化苄基三乙铵用量为甲苯的0.2当量,高锰酸钾与甲苯的物质的量比为4.5:1.与电热套加热方式相比,微波辐射法缩短了反应时间,并显著提高了反应效率.以苯甲酸制备实验为例介绍了“讲一练二考三”教学新理念及其在有机化学实验教学实践中的运用.     

Green and rapid preparation of thermally stable and highly organosoluble polyamides containing L‐phenylalanine‐9,10‐dihydro‐9,10‐ethanoanthracene‐11,12‐dicarboximido moieties

A chiral diacid monomer containing L ‐phenylalanine‐9,10‐dihydro‐9,10‐ethanoanthracene‐11,12‐dicarboximido unit was successfully synthesized in four steps and used in the preparation of a series of novel optically active polyamides by direct polycondensation with diverse aromatic diamines using 1,3‐dipropylimidazolium bromide under microwave dielectric heating. Ionic liquids (ILs) efficiently absorb microwave energy and thus are employed as solvent. By controlling the concentration of 1,3‐dipropylimidazolium bromide, reaction time and power level, high yield and moderate inherent viscosity polymers could be achieved in a very short period of time. All the resulting polymers exhibited excellent solubility in various organic solvents. The polyamides were found to have inherent viscosities in the range of 0.54–0.85 dL g^?1. These polyamides had glass‐transition temperatures (T_g) above 180°C, and a 10% weight‐loss temperatures in excess of 340°C with char yield at 800°C in nitrogen higher than 40%. A comparative study on effects exerted by microwave technique with conventional method is also presented. Copyright © 2009 John Wiley & Sons, Ltd.     

Direct dehydration polycondensation of lactic acid catalyzed by water‐stable Lewis acids

Poly(L ‐lactic acid) (PLLA) is generally produced by ring‐opening polymerization of (S,S)‐lactide, which is prepared from dehydration polycondensation of lactic acid and successive depolymerization. Results of this study show that scandium trifluoromethanesulfonate [Sc(OTf)₃] and scandium trifluoromethanesulfonimide [Sc(NTf₂)₃] are effective for one‐step dehydration polycondensation of L ‐lactic acid. Bulk polycondensation of L ‐lactic acid was carried out at 130–170 °C to give PLLA with M_n of 5.1 × 10⁴ to 7.3 × 10⁴ (yield 32–60%). The solution polycondensation was performed at 135 °C for 48 h to afford PLLA with M_n of 1.1 × 10⁴ with good yield (90%). In no case did ¹H NMR, specific optical rotation, or DSC measurement confirm racemizations. The catalyst was recovered easily by extraction with water and reused for polycondensation. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5247–5253, 2006     

Synthesis of phosphorus‐containing vinyl ether monomers and oligomers and their photoinitiated polymerization

Divinyl ether monomers containing phosphorous residues were synthesized by the addition reaction of glycidyl vinyl ether (GVE) with various phosphonic dichlorides or dichlorophosphates with quaternary onium salts as catalysts. The reaction of GVE with phenylphosphonic dichloride gave bis[1‐(chloromethyl)‐2‐(vinyloxy)ethyl]phenylphosphonate ( 1a ) in a 77% yield. The polycondensation of 1a with terephthalic acid was also carried out with 1,8‐diazabicyclo[5.4.0]undecene‐7 (DBU) as a condensing agent to afford the corresponding phosphorus‐containing polyester. A multifunctional monomer containing both vinyl ether groups and methacrylate groups was prepared by the reaction of 1a with methacrylic acid with DBU. The photoinitiated cationic polymerization of these vinyl ether compounds proceeded rapidly with bis[4‐(diphenylsulfonio)phenyl]sulfide‐bishexafluorophosphate as the cationic photoinitiator without a solvent upon ultraviolet irradiation. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2031–2042, 2004     

Microwave‐enhanced rapid synthesis of organosoluble polyamides based on 5‐(3‐acetoxynaphthoylamino)‐isophthalic acid

A series of photoactive polyamides (PAs) containing acetoxynaphthalamide side chain with inherent viscosities of 0.27–0.56 dl g^?1 were prepared by the direct polycondensation reaction of the 5‐(3‐acetoxynaphthoylamino)isophthalic acid with various commercially available diamines by means of triphenyl phosphite (TPP) and pyridine (Py) in the presence of calcium chloride and N‐methyl‐2‐pyrrolidone (NMP) under microwave irradiation and conventional heating conditions. Most of the resulting PAs are soluble in strong polar solvents such as N,N‐dimethylformamide (DMF), N,N‐dimethylacetamide, and NMP. Thermo‐gravimetric analysis (TGA) showed that polymers are thermally stable, 10% weight loss temperatures in excess of 320 and 378°C, and char yields at 600°C in nitrogen higher than 60%. These macromolecules exhibited maximum UV‐Vis absorption at 265 and 300 nm in a DMF solution. Their photoluminescence in the DMF solution demonstrated fluorescence emission maxima around 361 and 427 nm for all of the PAs. Copyright © 2008 John Wiley & Sons, Ltd.     

Melt polycondensation of L‐lactic acid with Sn(II) catalysts activated by various proton acids: A direct manufacturing route to high molecular weight Poly(L‐lactic acid)

Poly(L ‐lactic acid) (PLLA) was produced by the melt polycondensation of L ‐lactic acid. For the optimization of the reaction conditions, various catalyst systems were examined at different temperature and reaction times. It was discovered that Sn(II) catalysts activated by various proton acids can produce high molecular weight PLLA [weight‐average molecular weight (M_w ) ≥ 100,000] in a relatively short reaction time (≤15 h) compared with simple Sn(II)‐based catalysts (SnO, SnCl₂ · 2H₂O), which produce PLLA with an M_w of less than 30,000 after 20 h. The new catalyst system is also superior to the conventional systems in regard to racemization and discoloration of the resultant polymer. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 1673–1679, 2000     

Construction of a combinatorial library of 2‐(4‐oxo‐4H‐1‐benzopyran‐3‐yl)‐4‐thiazolidinones by microwave‐assisted one‐pot parallel syntheses

A one‐pot liquid‐phase combinatorial synthesis of 2‐(4‐oxo‐4H‐1‐benzopyran‐3‐yl)‐4‐thiazolidinones bearing diverse substituents at the 3‐position under microwave irradiation was successfully performed using 3‐formyl chromone, primary amine, and mercaptoacetic acid as reactants. Compared to an identical library generated by conventional parallel synthesis, the microwave‐assisted parallel synthesis approach dramatically decreased the reaction time from an average of 9 h to 5 min, and substantially increased the product yields. The coupling of microwave technology with liquid‐phase combinatorial synthesis constitutes a novel and particularly attractive avenue for the rapid generation of structurally diverse libraries. © 2007 Wiley Periodicals, Inc. Heteroatom Chem 18:381–389, 2007; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20309     

Fast synthesis of optically active polyamides containing <Emphasis Type="SmallCaps">l</Emphasis>-methionine linkages in ionic liquid via a microwave-assisted process

Several optically active aromatic polyamides have been synthesized via direct polycondensation of chiral diacid monomer 1 containing l-methionine moiety with diverse aromatic diamines 2a–2h in a green medium, namely 1,3-dipropylimidazolium bromide as a room temperature ionic liquid. In order to evaluate the advantages of microwave promotion of these polymerization reactions, we compared microwave irradiation (method I) with conventional oil bath heating (method II) by means of reaction rates, conversions, and inherent viscosities. The inherent viscosities of resulting polymers were ranging between 0.47–0.65 and 0.35–0.57 dL/g in methods I and II, respectively. These polymers were characterized by means of ¹H-NMR, FT-IR, elemental, organosolubility, differential scanning calorimetry, and thermal gravimetric analysis techniques. The obtained polymers show thermal stability up to 273 °C under nitrogen atmosphere and good solubility in polar organic solvents. Polymerization reactions proceeded in higher yields and moderate inherent viscosities under microwave irradiation conditions besides the dramatically shorter reaction times and achieving the more pure products.     

氧化锌催化淀粉/乳酸接枝共聚物的制备与表征

以氧化锌为催化剂,采用原位聚合法制备了淀粉/乳酸接枝共聚物。由FT-IR、1H NMR、XRD和SEM对接枝产物进行了表征,且讨论了反应温度、淀粉与乳酸质量比、催化剂用量和反应时间对淀粉接枝率的影响,结果表明,当反应温度为95℃,淀粉与乳酸质量比为1∶5,催化剂用量为乳酸质量的1.0%,反应时间11 h时,产物的接枝率可达到14.20%。     

Microwave‐assisted One‐pot,Three‐component Regiospecific and Sterospecific Synthesis of Spiro Indanone Pyrrolidine/Piperidine Fused Nitrochromene Derivatives Through 1,3‐Dipolar Cycloaddition Reactions

A simple, straightforward, and versatile protocol for the synthesis of spiro indanone pyrrolidine/piperidine fused nitrochromene derivatives is described. The synthesis of a new series of spirocyclic molecules has been expediently accomplished via a one‐pot, three component 1,3‐dipolar cycloaddition reaction. 2‐Phenyl‐nitrochromene dipolarophiles were reacted with azomethine ylides, generated in situ by the condensation of dicarbonyl compound indane‐1,3‐dione and secondary amino acid (L‐proline/pipecolic acid), to produce the corresponding cycloadducts in good yields (85–90%) under classical as well as under microwave irradiation. The cycloaddition reaction was found to be highly regiospecific and diasterospecific. The regiochemical and sterochemical outcome of the cycloaddition reaction is ascertained by 2D NMR (COSY and NOESY) studies.     

微波辐射下苯并噁唑基吡啶的合成

在微波辐射条件下,利用邻氨基酚和吡啶羧酸在多聚磷酸中的缩合反应,合成了2种苯并唑基取代吡啶 最佳反应条件为:450W辐射4min 相比于常规反应,反应时间大为缩短且产率令人满意     

Efficient MW‐Assisted Synthesis of Some New Isoquinolinone Derivatives With In Vitro Antitumor Activity

An efficient and convenient synthesis of novel [1,3]oxazino[3,2‐b]isoquinoline‐5,12‐dione derivative 4 was achieved by the reaction of anthranilic acid with homophthalic anhydride under microwave irradiation, followed by cyclization with acetic anhydride. Some new isoquinolinone and fused isoquinolinone derivatives were prepared via reaction of compound 4 with different nitrogen nucleophiles by using reflux and a focused microwave reactor. Microwave irradiation favored the formation of the desired products with improved yields and shortened reaction times. This is a simple and green method for the synthesis of isoquinolinone derivatives. The structures of the prepared compounds were elucidated by IR, ¹H‐NMR, and mass spectroscopy. Some of the newly prepared compounds were tested in vitro against a panel of three human tumor cell lines, namely, hepatocellular carcinoma (liver) HepG2, colon cancer HCT‐116, and mammary gland breast MCF‐7. Almost all of the tested compounds showed satisfactory activity.