Effect of differently terminal groups of poly(amido‐amine) dendrimers on dispersion stability of nano‐silica and ab initio calculations

To investigate the effect of differently terminal groups of the lowest‐order generation poly(amido‐amine) dendrimers on dispersion stability of nano‐silica, the four types of G0‐CH₂CH₃ (G0E), G0‐CH₂CH₂CH₂CH₃ (G0B), G0‐NH₂ (G0N), and G0‐COOH (G0C) dendrimer molecules are used to modify the silica based on the dry modification. The zeta potential, the surface charge density, and the storage stability of kinds of modified SiO₂ dispersion systems have been studied. The results show that the effect of carboxyl groups on dispersion stability is stronger than that of the other groups such as the amine and alkyl groups. Mulliken charge distributions of the main active sites are analyzed through the conductor‐like polarizable calculation model (CPCM) on basis of the density functional theory (DFT) method, indicating the formation of chemical bonding between the modifiers and SiO₂ particles. The most stable SiO₂ dispersion system modified by G0‐COOH dendrimer molecule is obtained due to the combined effect including the hydrogen bonding, electrostatic repulsive force, and the steric hindrance of the terminal groups. Copyright © 2015 John Wiley & Sons, Ltd.     

Photoresponsive nanocarriers based on PAMAM dendrimers with a o‐nitrobenzyl shell

Gn (n = 3, 4, and 5) poly(amidoamine) (PAMAM) dendrimers were synthesized and peripherally modified with photocleavable o‐nitrobenzyl (NB) groups by reacting o‐nitrobenzaldehyde with the terminal amine groups of PAMAM dendrimers, followed by reducing the imine to amine groups with NaBH₄. The NB‐modified dendrimers, Gn‐NB (n = 3, 4, and 5), were characterized by nuclear magnetic resonance and fourier transform infrared spectroscopy. The results showed that the NB groups were successfully attached on the periphery of the dendrimers with near 100% grafting efficiency. Such a photosensitive NB shell could be cut off on irradiation with 365 nm ultraviolet (UV) light. The encapsulation and release of guest molecules, that is, salicylic acid (SA) and adriamycin (ADR), by Gn‐NB were explored. The encapsulation capability of these dendrimers was found to increase as the guest molecular size was decreased and have dependence on the generation of dendrimers as well. For both of SA and ADR, the average encapsulation numbers per dendrimer decreased in the order of G4‐NB > G5‐NB > G3‐NB, indicating that the fourth generation dendrimer was a better container for the guest molecules. The rate of SA release was found to be greater with UV irradiation than that without, suggesting that the NB‐shelled PAMMAM dendrimers could function as a molecular container/box with photoresponsive characteristics. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 551–557, 2010     

Ionic networks derived from the protonation of dendritic amines with carboxylic acid end‐functionalized PEGs

The synthesis and characterization of novel ionic networks linked by the ammonium salts of poly(propylene imine) (PPI) dendrimers of the first (PPI G1) and second (PPI G2) generation and two short bis carboxymethyl ether terminated poly(ethylene glycol)s (DiCOOH‐PEG) with different molecular weights (M_n ～ 250 and M_n ～ 600) are reported. Likewise, an ionic network based on PPI G1 and a long αω‐dicarboxylic acid functionalized PEG (M_n ～ 4800) were evaluated. Simpler ionic structures based on tris(2‐aminoethyl)amine or hexamethylene diamine and the short DiCOOH‐PEGs are also investigated. The ionic structures formed were confirmed by differential scanning calorimetry, Fourier Transform Infrared spectroscopy in the attenuated‐total‐reflection mode, and ¹H‐¹³C NMR spectroscopy. A comprehensive ¹H NMR analysis revealed that only the primary amines of the PPI G1 dendrimer residing at the periphery take part in the ionic network formation. In the case of PPI G2, the picture is less clear. A thorough investigation of the thermal degradation of the utilized precursors and all the ionic materials prepared was additionally performed by thermogravimetric analysis. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Polystyrene latices containing dodecanamide‐modified poly(propyleneimine) dendrimers

Polymerization of styrene in aqueous dispersions of the dodecanamide derivative of poly(propyleneimine) dendrimer DAB‐dendr‐(NH₂)₆₄ and sodium dodecyl sulfate (SDS) produced stable latices. With initial SDS concentrations of 10 mM or less, molar ratios of SDS to dendrimer end groups ranging from 2.3:1 to 9.5:1, and less than 10 wt % of SDS relative to styrene, the polystyrene latices had diameters of 30–60 nm and coefficients of variation of diameters of less than 10% when measured by transmission electron microscopy. Higher concentrations of SDS gave more polydisperse latices. The polystyrene latices formed with SDS and the dodecanamide‐modified dendrimer were almost the same size and polydispersity as those formed with SDS and the parent primary amine dendrimer DAB‐dendr‐(NH₂)₆₄. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 597–605, 2003     

Sensitive Biosensors Based on (Dendrimer Encapsulated Pt Nanoparticles)/Enzyme Multilayers

A sensitive enzymed‐based biosensor for glucose has been obtained by introducing dendrimer encapsulated Pt nanoparticles via a layer‐by‐layer assembling method. The free amine groups located on each poly(amidoamine) dendrimer molecule were exploited to covalently attach enzyme to the dendrimer chains using carbodiimide coupling. The resultant enzyme electrodes are shown to have excellent sensitivity (as high as 30.33 μA mM^?1 cm^?2) and a limit of detection (about 0.1 μmol L^?1), depending on metal nanoparticles within dendrimers and the biocompatibility of dendrimers, the linear response range to glucose (from 5 μM to 1.0 mM), a fast response time (within 5 s), and good reproducibility (<8% relative standard deviation between electrodes at low substrate concentration). The sensitivities, and stabilities determined experimentally have demonstrated the potential of dendrimer encapsulated Pt nanoparticles as a novel candidate for enzymatic glucose biosensors.     

Hydrogen‐bonded networks in 5‐chloropyridin‐2‐amine–fumaric acid (2/1) and 2‐aminopyridinium dl‐malate

Crystals of 5‐chloropyridin‐2‐amine–(2E)‐but‐2‐enedioate (2/1), 2C₅H₅ClN₂·C₄H₄O₄, (I), and 2‐aminopyridinium dl ‐3‐carboxy‐2‐hydroxypropanoate, C₅H₇N₂⁺·C₄H₅O₅⁻, (II), are built from the neutral 5‐chloropyridin‐2‐amine molecule and fumaric acid in the case of (I) and from ring‐N‐protonated 2‐aminopyridinium cations and malate anions in (II). The fumaric acid molecule lies on an inversion centre. In (I), the neutral 5‐chloropyridin‐2‐amine and fumaric acid molecules interact via hydrogen bonds, forming two‐dimensional layers parallel to the (100) plane, whereas in (II), oppositely charged units interact via ionic and hydrogen bonds, forming a three‐dimensional network.     

Counter‐anion role in the formation of two supramolecular complexes: [Ag2(DPP)2](ClO4)2·CH3CN and [Ag2(DPP)2(NO3)2] {DPP is N‐[(diphenylphosphanyl)methyl]pyridin‐4‐amine}

The title compounds, bis{μ‐N‐[(diphenylphosphanyl)methyl]pyridin‐4‐amine‐κ²N¹:P}disilver bis(perchlorate) acetonitrile monosolvate, [Ag₂(C₁₈H₁₇N₂P)₂](ClO₄)₂·CH₃CN, (1), and bis{μ‐N‐[(diphenylphosphanyl)methyl]pyridin‐4‐amine‐κ²N¹:P}bis[(nitrato‐κ²O,O)silver], [Ag₂(C₁₈H₁₇N₂P)₂(NO₃)₂], (2), each contain disilver macrocyclic [Ag₂(C₁₈H₁₇N₂P)₂]²⁺ cations lying about inversion centres. The cations are constructed by two N‐[(diphenylphosphanyl)methyl]pyridin‐4‐amine (DPP) ligands linking two Ag⁺ cations in a head‐to‐tail fashion. In (1), the unique Ag⁺ cation has a near‐linear coordination geometry consisting of one pyridine N atom and one P atom from two different DPP ligands. Two ClO₄⁻ anions doubly bridge two metallomacrocycles through Ag...O and N—H...O weak interactions to form a chain extending in the c direction. The half‐occupancy acetonitrile molecule lies with its methyl C atom on a twofold axis and makes a weak N...Ag contact. In (2), there are two independent [Ag(C₁₈H₁₇N₂P)]⁺ cations. The nitrate anions weakly chelate to each Ag⁺ cation, leading to each Ag⁺ cation having a distorted tetrahedral coordination geometry consisting of one pyridine N atom and one P atom from two different DPP ligands, and two chelating nitrate O atoms. Each dinuclear [Ag₂(C₁₈H₁₇N₂P)₂(NO₃)₂] molecule acts as a four‐node to bridge four adjacent equivalent molecules through N—H...O interactions, forming a two‐dimensional sheet parallel to the bc plane. Each sheet contains dinuclear molecules involving just Ag1 or Ag2 and these two types of sheet are stacked in an alternating fashion. The sheets containing Ag1 all lie near x = , , etc, while those containing Ag2 all lie near x = 0, 1, 2 etc. Thus, the two independent sheets are arranged in an alternating sequence at x = 0, , 1, etc. These two different supramolecular structures result from the different geometric conformations of the templating anions which direct the self‐assembly of the cations and anions.     

Deep‐red light‐emitting phosphorescent dendrimer encapsulated tris‐[2‐benzo[b]thiophen‐2‐yl‐pyridyl] iridium (III) core for light‐emitting device applications

New deep‐red light‐emitting phosphorescent dendrimers with hole‐transporting carbazole dendrons were synthesized by reacting tris(2‐benzo[b]thiophen‐2‐yl‐pyridyl) iridium (III) complex with carbazolyl dendrons by DCC‐catalyzed esterification. The resulting first‐, second‐, and third‐generation dendrimers were found to be highly efficient as solution‐processable emitting materials and for use in host‐free electrophosphorescent light‐emitting diodes. We fabricated a host‐free dendrimer EL device with configuration ITO/PEDOT:PSS (40 nm)/dendrimer (55 nm)/BCP (10 nm)/Alq₃ (40 nm)/LiF (1 nm)/Al (100 nm) and characterized the device performance. The multilayered devices showed luminance of 561 cd/m² at 383.4 mA/cm² (12 V) for 15 , 1302 cd/m² at 321.3 mA/cm² (14 V) for 16 , and 422 cd/m² at 94.4 mA/cm² (18 V) for 17 . The third‐generation dendrimer, 17 (η_ext = 6.12% at 7.5 V), showed the highest external quantum efficiency (EQE) with an increase in the density of the light‐harvesting carbazole dendron. Three dendrimers exhibited considerably pure deep‐red emission with CIE 1931 (Commission International de L'Eclairage) chromaticity coordinates of x = 0.70, y = 0.30. The CIE coordinates remained very stable with the current density. The integration of rigid hole‐transporting dendrons and phosphorescent complexes provides a new route to design highly efficient solution‐processable materials for dendrimer light‐emitting diode (DLED) applications. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7517–7533, 2008     

Interactions and Encapsulation of Vitamins C,B3, and B6 with Dendrimers in Water

Titrations of commercial diaminobutane (DAB) and polyamidoamine (PAMAM) dendrimers by vitamins C (ascorbic acid, AA), B₃ (nicotinic acid), and B₆ (pyridoxine) were monitored by ¹H NMR spectroscopy using the chemical shifts of both dendrimer and vitamin protons and analyzed by comparison with the titration of propylamine. Quaternarizations of the terminal primary amino groups and intradendritic tertiary amino groups, which are nearly quantitative with vitamin C, were characterized by more or less sharp variations (Δδ) of the ¹H chemical shift (δ) at the equivalence points. The peripheral primary amino groups of the DAB dendrimers were quaternarized first, but not selectively, whereas a sharp chemical‐shift variation was recorded for the inner methylene protons near the tertiary amines, thereby indicating encapsulation, when all the dendritic amines were quaternarized. With DAB‐G5‐64‐NH₂, some excess acid is required to protonate the inner amino groups, presumably because of basicity decrease due to excess charge repulsion. On the other hand, this selectivity was not observed with PAMAM dendrimers. The special case of the titration of the dendrimers by vitamin B₆ indicates only dominant supramolecular hydrogen‐bonding interactions and no quaternarization, with core amino groups being privileged, which indicates the strong tendency to encapsulate vitamins. With vitamin B₃, a carboxylic acid, titration of DAB‐G3‐16‐NH₂ shows that only six peripheral amino groups are protonated on average, even with excess vitamin B₃, because protonation is all the more difficult due to increased charge repulsion, as positive charges accumulate around the dendrimer. Inner amino groups interact with this vitamin, however, thus indicating encapsulation presumably with supramolecular hydrogen bonding without much charge transfer.     

Hexameric MnII Dendrimer as MRI Contrast Agent

A Mn^II chelating dendrimer was prepared as a contrast agent for MRI applications. The dendrimer comprises six tyrosine‐derived [Mn(EDTA)(H₂O)]^2? moieties coupled to a cyclotriphosphazene core. Variable temperature ¹⁷O NMR spectroscopy revealed a single water co‐ligand per Mn^II that undergoes fast water exchange (k_ex=(3.0±0.1)×10⁸ s^?1 at 37 °C). The 37 °C per Mn^II relaxivity ranged from 8.2 to 3.8 mM ^?1 s^?1 from 0.47 to 11.7 T, and is sixfold higher on a per molecule basis. From this field dependence a rotational correlation time was estimated as 0.45(±0.02) ns. The imaging and pharmacokinetic properties of the dendrimer were compared to clinically used [Gd(DTPA)(H₂O)]^2? in mice at 4.7 T. On first pass, the higher per ion relaxivity of the dendrimer resulted in twofold greater blood signal than for [Gd(DTPA)(H₂O)]^2?. Blood clearance was fast and elimination occurred through both the renal and hepatobiliary routes. This Mn^II containing dendrimer represents a potential alternative to Gd‐based contrast agents, especially in patients with chronic kidney disease where the use of current Gd‐based agents may be contraindicated.     

Synthesis of dendrimer‐like copolymers based on the star[Polystyrene‐Poly(ethylene oxide)‐Poly(ethoxyethyl glycidyl ether)] terpolymers by click chemistry

The dendrimer‐like copolymers [PEEGE‐(PS/PEO)]_n (n ≥ 2) based on the star[Polystyrene‐Poly(ethylene oxide)‐Poly(ethoxyethyl glycidyl ether)] [star(PS‐PEO‐(PEEGE‐OH))] terpolymers were synthesized by click chemistry. First, the star‐shaped copolymers star[PS‐PEO‐(PEEGE‐Alkyne)] (also termed as [PEEGE‐(PS/PEO)]₁) were synthesized by the reaction of hydroxyl end group at PEEGE arm (on star[PS‐PEO‐(PEEGE‐OH)]) with propargyl bromide. Then, the small molecule 1,4‐diazidobutane (DAB) with two azide groups and pentaerythritol tetrakis (2‐azidoisobutyrate) (PTAB) with four azide groups were synthesized and reacted with [PEEGE‐(PS/PEO)]₁ by the click chemistry for dendrimer‐like [PEEGE‐(PS/PEO)]₂ and [PEEGE‐(PS/PEO)]₄, respectively. However, in the latter case, only the [PEEGE‐(PS/PEO)]₃ was formed as the main product because of the steric effect. The final dendrimer‐like [PEEGE‐(PS/PEO)]_n copolymers were characterized by SEC and ¹H‐NMR in detail. Comparing with the SEC of their precursor [PEEGE‐(PS/PEO)]₁, the curves of [PEEGE‐(PS/PEO)]₂ was shifted to the shorter elution time, while that of [PEEGE‐(PS/PEO)]_n (n ≥ 3) was shifted to the longer elution time, which was attributed to the different hydrodynamic volume derived from their separate structures and compositions in THF solution. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4800–4810, 2009     

New Liquid Crystalline Materials Based on Two Generations of Dendronised Cyclophosphazenes

A divergent approach was used for the synthesis of dendritic structures based on a cyclotriphosphazene core with 12 or 24 hydroxyl groups, by starting from [N₃P₃(OC₆H₄OH‐4)₆] and using an acetal‐protected 2,2‐di(hydroxymethyl)propionic anhydride as the acylating agent. Hydroxyl groups in these first‐ and second‐generation dendrimers, G1‐(OH)₁₂ or G2‐(OH)₂₄ , were then condensed in turn with mono‐ or polycatenar pro‐mesogenic acids to study their ability to promote self‐assembly into liquid crystalline structures. Reactions were monitored by using ³¹P{¹H} and ¹H NMR spectroscopy and the chemical structure of the resulting materials was confirmed by using different spectroscopic techniques and mass spectrometry (MALDI‐TOF MS). The results were in accordance with monodisperse, fully functionalised cyclotriphosphazene dendrimers. Thermal and liquid crystalline properties were studied by using optical microscopy, differential scanning calorimetry and X‐ray diffraction. The dendrimer with 12 4‐pentylbiphenyl mesogenic units gives rise to columnar rectangular organisation, whereas the one with 24 pentylbiphenyl units does not exhibit mesomorphic behaviour. In the case of materials that contain polycatenar pro‐mesogenic units with two aromatic rings ( A4 vs. A5 ), the incorporation of a short flexible spacer connected to the periphery of the dendron (acid A5 ) was needed to achieve mesomorphic organisation. In this case, both dendrimer generations G1 A5 and G2 A5 exhibit a hexagonal columnar mesophase.     

Preparation,characterization and catalytic application of PdPt bimetallic nanoparticles stabilized by 15‐membered triolefinic macrocycle‐terminated poly(propylene imine) dendrimer

PdPt bimetallic nanoparticles stabilized by 15‐membered triolefinic macrocycle‐stabilized poly(propylene imine) dendrimer (G3‐M(Pd_x Pt_10−x ) DSNs) have been prepared via synthesis of a 15‐membered triolefinic macrocycle‐modified third‐generation poly(propylene imine) dendrimer (G3‐M) and then synchronous ligand exchange with Pd(PPh₃)₄/Pt(PPh₃)₄ complexes. The structure and catalytic activity of the DSNs were characterized using Fourier transform infrared, ¹H NMR, transmission electron microscopy, energy‐dispersive X‐ray and X‐ray photoelectron analyses. As a novel catalyst system, it can be concluded that the composition of the bimetallic nanoparticles has an influence on the catalytic activity of the hydrogenation reaction of acrylonitrile–butadiene rubber, which can be related to synergistic effect. Furthermore, the selectivity and recyclability of G3‐M(Pd_x Pt_10−x ) DSN catalyst are also discussed.     

Direct Estimation of the Surface Location of Immobilized Functional Groups for Concerted Catalysis Using a Probe Molecule

The location of active sites during concerted catalysis by a metal complex and tertiary amine on a SiO₂ surface is discussed based on the interaction between the functionalized SiO₂ surface and a probe molecule, p‐formyl phenylboronic acid. The interactions of the probe molecule with the surface functionalities, diamine ligand, and tertiary amine, were analyzed by FT‐IR and solid‐state ¹³C and ¹¹B MAS NMR. For the catalyst exhibiting high 1,4‐addition activity, the diamine ligand and tertiary amine base exist in closer proximity than in the catalyst with low activity.     

Alkane Oxidation by an Immobilized Nickel Complex Catalyst: Structural and Reactivity Differences Induced by Surface‐Ligand Density on Mesoporous Silica

Immobilized nickel catalysts SBA*‐ L ‐x/Ni ( L =bis(2‐pyridylmethyl)(1H‐1,2,3‐triazol‐4‐ylmethyl)amine) with various ligand densities ( L content (x)=0.5, 1, 2, 4 mol % Si) have been prepared from azidopropyl‐functionalized mesoporous silicas SBA‐N₃‐x. Related homogeneous ligand LtBu and its Ni^II complexes, [Ni( LtBu )(OAc)₂(H₂O)] ( LtBu /Ni) and [Ni( LtBu )₂]BF₄ (2 LtBu /Ni), have been synthesized. The L /Ni ratio (0.9–1.7:1) in SBA*‐ L ‐x/Ni suggests the formation of an inert [Ni L ₂] site on the surface at higher ligand loadings. SBA*‐ L ‐x/Ni has been applied to the catalytic oxidation of cyclohexane with m‐chloroperbenzoic acid (mCPBA). The catalyst with the lowest loading shows high activity in its initial use as the homogeneous LtBu /Ni catalyst, with some metal leaching. As the ligand loading increases, the activity and Ni leaching are suppressed. The importance of site‐density control for the development of immobilized catalysts has been demonstrated.     

Controlled Uptake and Release of Metal Cations by Vanadium Oxide Nanotubes

Vanadium oxide nanotubes (C_n‐VO_x‐NTs) contain α‐monoamines (C_nH_2n+1NH₂ with 4≤n≤22) as templates intercalated between crystalline VO_x layers comprising multilayer tube walls. The present study reveals that a large proportion of the amines can easily be exchanged by metal cations. The tubular morphology is not affected by this reaction, but the distance between the VO_x layers, i.e., 2.8 nm in C₁₂‐VO_xNTs, decreases in the reaction product to 0.9 – 1.2 nm, depending on the metal salt actually applied. Alkali (Na⁺, K⁺), alkaline‐earth (Mg²⁺, Ca²⁺, Sr²⁺), and transition‐metal salts (Fe²⁺, Co²⁺, Ni²⁺, Cu²⁺) have successfully been intercalated. This reaction is partly reversible since intercalated sodium cations can be resubstituted by dodecylamine. This exchange produces again C₁₂‐VO_x‐NTs with the original inter‐layer spacing. However, this release is successful only when sodium is complexed by a crown ether. Under these reaction conditions, even a cyclic uptake and release of Na⁺ and amine, respectively, accompanied by a corresponding shrinkage and widening of the inter‐layer distance, is observed while the tubular structure is widely preserved. Furthermore, a distinct selectivity of the metal‐cation exchange has been observed.     

Hydrogen bonding in 4‐nitrobenzene‐1,2‐diamine and two hydrohalide salts

The structures of 4‐nitrobenzene‐1,2‐diamine [C₆H₇N₃O₂, (I)], 2‐amino‐5‐nitroanilinium chloride [C₆H₈N₃O₂⁺·Cl⁻, (II)] and 2‐amino‐5‐nitroanilinium bromide monohydrate [C₆H₈N₃O₂⁺·Br⁻·H₂O, (III)] are reported and their hydrogen‐bonded structures described. The amine group para to the nitro group in (I) adopts an approximately planar geometry, whereas the meta amine group is decidedly pyramidal. In the hydrogen halide salts (II) and (III), the amine group meta to the nitro group is protonated. Compound (I) displays a pleated‐sheet hydrogen‐bonded two‐dimensional structure with R₂²(14) and R₄⁴(20) rings. The sheets are joined by additional hydrogen bonds, resulting in a three‐dimensional extended structure. Hydrohalide salt (II) has two formula units in the asymmetric unit that are related by a pseudo‐inversion center. The dominant hydrogen‐bonding interactions involve the chloride ion and result in R₄²(8) rings linked to form a ladder‐chain structure. The chains are joined by N—H...Cl and N—H...O hydrogen bonds to form sheets parallel to (010). In hydrated hydrohalide salt (III), bromide ions are hydrogen bonded to amine and ammonium groups to form R₄²(8) rings. The water behaves as a double donor/single acceptor and, along with the bromide anions, forms hydrogen bonds involving the nitro, amine, and ammonium groups. The result is sheets parallel to (001) composed of alternating R₅⁵(15) and R₆⁴(24) rings. Ammonium N—H...Br interactions join the sheets to form a three‐dimensional extended structure. Energy‐minimized structures obtained using DFT and MP2 calculations are consistent with the solid‐state structures. Consistent with (II) and (III), calculations show that protonation of the amine group meta to the nitro group results in a structure that is about 1.5 kJ mol⁻¹ more stable than that obtained by protonation of the para‐amine group. DFT calculations on single molecules and hydrogen‐bonded pairs of molecules based on structural results obtained for (I) and for 3‐nitrobenzene‐1,2‐diamine, (IV) [Betz & Gerber (2011). Acta Cryst. E 67 , o1359] were used to estimate the strength of the N—H...O(nitro) interactions for three observed motifs. The hydrogen‐bonding interaction between the pairs of molecules examined was found to correspond to 20–30 kJ mol⁻¹.     

Three related benzoannelated diazapolyether macrocycles: effects of macrocycle ring size and position of benzo groups on hydrogen bonding of the amine H atoms

The benzoannelated diazapolyether macrocycles 6,7,9,10,17,18‐hexahydro‐5H,11H‐8,16,19‐trioxa‐5,11‐diazadibenzo[a,g]cyclopentadecene, C₁₈H₂₂N₂O₃, (I), 6,7,9,10,12,13,20,21‐octahydro‐5H,14H‐8,11,19,22‐tetraoxa‐5,14‐diazadibenzo[a,g]cyclooctadecene, C₂₀H₂₆N₂O₄, (II), and 6,7,9,10,17,18,20,21‐octahydro‐16H,22H‐5,8,11,19‐tetraoxa‐16,22‐diazadibenzo[a,j]cyclooctadecene 0.3‐hydrate, C₂₀H₂₆N₂O₄·0.304H₂O, (III), show different patterns of hydrogen bonding. In (I), the amine H atoms participate only in intramolecular hydrogen bonds with ether O atoms. In (II), the amine H atoms form intramolecular hydrogen bonds with the phenoxy ether O atoms and intermolecular hydrogen bonds with alkyl ether O atoms in an adjacent molecule, forming a chain linking the macrocycles together via an R₂²(10) motif. Molecules of (II) were found on a crystallographic twofold axis. In (III), the amine H atoms participate in a hydrogen‐bond network with adjacent ether O atoms and with a water molecule [having a partial occupancy of 0.304 (6)] that links the molecules together via a C₂²(7) motif.     

Determination of maximum loading capacity of polyamidoamine (PAMAM) dendrimers and evaluation of Cu55 dendrimer‐encapsulated nanoparticles for catalytic activity

Spectrophotometric titrations provide information about the interior of the polyamidoamine (PAMAM) dendrimers, and therefore how nanoparticles are encapsulated. In this work, binding studies were performed to determine maximum loading capacities (N) of hydroxyl terminated G4, G5, and G6 PAMAM dendrimers with Cu²⁺ ions. The values of N found via spectrophotometric titrations were 16.22, 31.86, and 57.36 for G4‐OH, G5‐OH, and G6‐OH, respectively. The determination of loading capacity was also done using Viva spin filtration, and the results were found to be in agreement with those found via spectrophotometric titrations. From the binding isotherm, the values of equilibrium constant (K′) were determined and found to be 0.0488 (G4‐OH), 0.0291 (G5‐OH), and 0.0158 (G6‐OH). Owing to instability of G4‐OH (Cu₁₆), G5‐OH (Cu₃₂), and G6‐OH (Cu₅₇) dendrimer‐encapsulated nanoparticles (DENs) synthesized, G6‐OH (Cu₅₅) DENs of average size 2.6 ± 0.3 nm were prepared and were found to be relatively stable. Thus G6‐OH (Cu₅₅) catalyst was evaluated for the reduction of 4‐nitrophenol and was found to be catalytically active toward reduction of 4‐nitrophenol. Reaction kinetics of 4NP reduction was thoroughly studied in light of the Langmuir‐Hinshelwood kinetic model, and surface rate k, and the adsorption rates K_4NP, and K_BH4 were determined. The reaction was performed at different temperatures, which further expanded the study into determination of thermodynamic (ΔH^‡, ΔS^‡, ΔG^‡, and E_A) parameters.     

Control of the Single‐Molecule Magnet Behavior of Lanthanide‐Diarylethene Photochromic Assemblies by Irradiation with Light

Lanthanide‐based extended coordination frameworks showing photocontrolled single‐molecule magnet (SMM) behavior were prepared by combining highly anisotropic Dy^III and Ho^III ions with the carboxylato‐functionalized photochromic molecule 1,2‐bis(5‐carboxyl‐2‐methyl‐3‐thienyl)perfluorocyclopentene (H₂dae), which acts as a bridging ligand. As a result, two new compounds of the general formula [{Ln^III₂(dae)₃(DMSO)₃(MeOH)} ? 10 M eOH]_n (M=Dy for 1 a and Ho for 2 ) and two additional pseudo‐polymorphs [{Dy^III₂(dae)₃(DMSO)₃(H₂O)} ? x MeOH]_n ( 1 b ) and [{Dy^III₂(dae)₃(DMSO)₃(DMSO)} ? x MeOH]_n ( 1 c ) were obtained. All four compounds have 2D coordination‐layer topologies, in which carboxylate‐bridged Ln₂ units are linked together by dae^2? anions into grid‐like frameworks. All four compounds exhibited a strong reversible photochromic response to UV/Vis light. Moreover, both 1 a and 2 show field‐induced SMM behavior. The slow magnetic relaxation of 1 a is influenced by the photoisomerization reaction leading to the observation of the cross‐effect: photocontrolled SMM behavior.