End‐group modified poly(methyl vinyl ether): Characterization and LCST demixing behavior in water

A range of hydrophilic poly(methyl vinyl ether) (PMVE) polymers was synthesized by living cationic polymerization of methyl vinyl ether (MVE), having different hydrophilic or hydrophobic chain‐end functionalities. The dissimilar end‐groups were either introduced by end‐capping of the growing polymer chain with LiBH₄, methanol, and water or by functional initiation with 2‐bromo‐(3,3‐diethoxy‐propyl)‐2‐methylpropanoate. The synthesized PMVEs were characterized by ¹H NMR, size exclusion chromatography, and matrix‐assisted laser desorption ionization time of flight, displaying a narrow polydispersity. Modulated temperature DSC was applied to study the influence of the nature of the end‐groups on the solubility behavior of PMVE in water. Terminal‐modification with a hydroxyl function improves the solubility, whereas a Br‐containing end‐group causes the polymer to be insoluble in water at room temperature; however, the special type III lower critical solution temperature demixing behavior being maintained. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 461–469, 2006     

Electron beam irradiation of poly(vinyl methyl ether) films: 1. Synthesis and film topography

Temperature-sensitive hydrogel layers on silicon (Si) substrates were synthesized by electron beam irradiation of spin-coated poly(vinyl methyl ether) (PVME) films. The influences of the used solvent, the polymer concentration, and the spinning velocity on the homogeneity and the thickness of the PVME film were investigated. In the range of concentration c(p) = 1-15 wt% PVME in ethanol solution, homogeneous films with a thickness between d = 50 nm and 1.7 mum were obtained. The films were cross-linked by electron beam irradiation under inert atmosphere and analyzed by sol-gel-analysis. The results were compared with bulkgels formed by electron beam irradiation of PVME in the dry state. The film topography was analyzed by high-resolution field emission scanning electron microscopy and atomic force microscopy. An islandlike structure in the dry, swollen, and shrunken state of the hydrogel films was observed.     

Stimuli‐responsive reversible physical networks. I. Synthesis and physical network properties of amphiphilic block and random copolymers with long alkyl chains by living cationic polymerization

The living cationic polymerization of octadecyl vinyl ether (ODVE) was achieved with an 1‐(isobutoxy)ethyl acetate [CH₃CH(OiBu)OCOCH₃]/EtAlCl₂ initiating system in hexane in the presence of an added weak Lewis base at 30 °C. In contrast to conventional polymers, poly(octadecyl vinyl ether) underwent upper‐critical‐solution‐temperature‐type phase separation in various solvents, such as hexane, toluene, CH₂Cl₂, and tetrahydrofuran, because of the crystallization of octadecyl chains. Amphiphilic block and random copolymers with crystallizable substituents of ODVE and 2‐methoxyethyl vinyl ether (MOVE) were synthesized via living cationic polymerization under similar conditions. Aqueous solutions of the copolymers yielded physical gels upon cooling because of strong interactions between ODVE units, regardless of the copolymer structure. The product gels, however, exhibited different viscoelastic properties: A 20 wt % solution of a block copolymer (400/20 MOVE/ODVE) became a soft physical gel that behaved like a typical gel, whereas the corresponding random copolymer gave a transparent but stiff gel with a certain relaxation time. Differential scanning calorimetry analysis confirmed that the crystalline–amorphous transition of the octadecyl chains was a key step for inducing such physical gelation. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1155–1165, 2005     

Novel dialkyl vinyl ether phosphonate monomers: Their synthesis and alternated radical copolymerizations with electron‐accepting monomers

Three new vinyl ether monomers containing phosphonate moieties were synthesized from transetherification reaction. We showed that the yield was dependent on the spacer length between the vinyl oxy group and the phosphonate moieties: when the spacer is a single methylene side reaction may occur, leading to the formation of acetal compounds. Free‐radical copolymerizations of phosphonate‐containing vinyl ether monomers with maleic anhydride were carried out, leading to alternated copolymers of rather low molecular weights (from 1000 to 7000 g/mol). Both gel permeation chromatography and ³¹P NMR analyses enhanced possible intramolecular transfer reactions occurring from the phosphonate moieties. Kinetic investigation showed that the electron‐withdrawing character of the phosphonate moieties tends to decrease the rate of copolymerization. Nevertheless, almost complete monomers conversion was reached after 30 min of reaction with dimethyl vinyloxyethylphosphonate (VEC₂PMe). Then, radical copolymerization of VEC₂PMe with a series of electron‐accepting monomers, that is, dibutyl maleate, dibutylitaconate, itaconic anhydride, butyl maleimide, and methyl maleimide, led to a series of alternated copolymers. From kinetic investigation, we showed that the higher the electron‐accepting effect, the faster the vinyl ether consumption and the higher the molecular weights. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of fluorine‐containing star‐shaped poly(vinyl ether)s via arm‐linking reactions in living cationic polymerization

Various types of fluorine‐containing star‐shaped poly(vinyl ether)s were successfully synthesized by crosslinking reactions of living polymers based on living cationic polymerization. Star polymers with fluorinated arm chains were prepared by the reaction between a divinyl ether and living poly(vinyl ether)s with fluorine groups (C₄F₉, C₆F₁₃, and C₈F₁₇) at the side chain using cationogen/Et_1.5AlCl_1.5 in a fluorinated solvent (dichloropentafluoropropanes), giving star‐shaped fluorinated polymers in high yields with a relatively narrow molecular weight distribution. The concentration of living polymers for the crosslinking reaction and the molar feed ratio of a bifunctional vinyl ether to living polymers affected the yield and molecular weight of the star polymers. Star polymers with block arms were prepared by a linking reaction of living block copolymers of a fluorinated segment and a nonfluorinated segment. Heteroarm star‐shaped polymers containing two‐ or three‐arm species were synthesized using a mixture of different living polymer species for the reaction with a bifunctional vinyl ether. The obtained polymers underwent temperature‐induced solubility transitions in various organic solvents, and their concentrated solutions underwent sol–gel transitions, based on the solubility transition of a thermoresponsive fluorinated segment. Furthermore, a slight amount of fluorine groups were shown to be effective for physical gelation when those were located at the arm ends of a star polymer. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Thermosensitive polymer structures based on segmented copolymer networks

Segmented polymer networks with LCST‐behavior have been prepared by free radical initiated copolymerization of α,ω‐bis‐methacrylate terminated poly(methyl vinyl ether) (PMVE) with 2‐hydroxy ethyl methacrylate (HEMA) or butyl acrylate (BA). The PMVE bis‐macromonomers have been obtained via a semi‐continuous process by end‐capping the living cationic polymerization of methyl vinyl ether (MVE) with HEMA. The phase separation temperature can be varied by changing the PMVE/comonomer ratio. Incorporation of PMVE‐grafts in the hydrogels increases the rate of deswelling and improves the mechanical properties. The application of the segmented networks for thermo‐controllable solid phase extraction has been demonstrated by their thermosensitive adsorption behavior of toluene from a water solution.     

Synthesis of poly(vinyl ether) polyols with pendant oxyethylene chains and properties of hydrophilic,thermo‐responsive polyurethanes prepared therefrom

Hydroxy‐terminated telechelic poly(vinyl ether)s with pendant oxyethylene chains were synthesized by the reaction of the CH₃CH(OCOCH₃)? O[CH₂]₄O? CH(OCOCH₃)CH₃/Et_1.5AlCl_1.5/THF‐based bifunctional living cationic polymers of 2‐methoxyethyl vinyl ether (MOVE), 2‐ethoxyethyl vinyl ether (EOVE), and 2‐(2‐methoxyethoxy)ethyl vinyl ether (MOEOVE) with water and the subsequent reduction of the aldehyde polymer terminals with NaBH₄. The obtained poly(vinyl ether) polyols were reacted with an equimolar amount of toluene diisocyanates [a mixture of 2,4‐ (80%) and 2,6‐ (20%) isomers] to give water‐soluble polyurethanes. The aqueous solutions of these polyurethanes caused thermally induced precipitation at a particular temperature depending on the sort of the thermosensitive poly(vinyl ether) segments containing oxyethylene side chains. These polyurethanes also function as polymeric surfactants, lowered the surface tension of their aqueous solutions. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1641–1648, 2010     

Thermosensitive polyalcohols: Synthesis via living cationic polymerization of vinyl ethers with a silyloxy group

Thermosensitive homopolymers and copolymers with hydroxy groups were synthesized via the living cationic polymerization of Si‐containing vinyl ethers. The cationic homopolymerization and copolymerization of five vinyl ethers with silyloxy groups, each with a different spacer length, were examined with a cationogen/Et_1.5AlCl_1.5 initiating system in the presence of an added base. When an appropriate base was added, the living cationic polymerization of Si‐containing monomers became feasible, giving polymers with narrow molecular weight distributions and various block copolymers. Subsequent desilylation gave well‐defined polyalcohols, in both water‐soluble and water‐insoluble forms. One of these polyalcohols, poly(4‐hydroxybutyl vinyl ether), underwent lower‐critical‐solution‐temperature‐type thermally induced phase separation in water at a critical temperature (T_PS) of 42 °C. This phase separation was quite sensitive and reversible on heating and cooling. The phase separation also occurred sensitively with random copolymers of thermosensitive and hydrophilic or hydrophobic units, the T_PS values of which in water could be controlled by the monomer feed ratio. The thermal responsiveness of this polyalcohol unit made it possible to prepare novel thermosensitive block and random copolymers consisting solely of alcohol units. One example prepared in this study was a 20 wt % aqueous solution of a diblock copolymer consisting of thermosensitive poly(4‐hydroxybutyl vinyl ether) and water‐soluble poly(2‐hydroxyethyl vinyl ether) segments, which transformed into a physical gel above 42 °C. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3300–3312, 2003     

Stereoregularity of poly(vinyl ether)

α-Methylvinyl isobutyl and methyl ethers were polymerized cationically and the structure of the polymers was studied by NMR. Poly(α-methylvinyl methyl ether) polymerized with iodine or ferric chloride as catalyst was found to be almost atactic, whereas poly(α-methylvinyl isobutyl ether) polymerized in toluene with BF₃OEt₂ or AlEt₂Cl as catalyst was found to be isotactic. In both cases, the addition of polar solvent resulted in the increase of syndiotactic structure as is the case with polymerization of alkyl vinyl ether. tert-Butyl vinyl ether was polymerized, and the polymer was converted into poly(vinyl acetate), the structure of which was studied by NMR. A nearly linear relationship between the optical density ratio D₇₂₂/D₇₃₆ in poly(tert-butyl vinyl ether) and the isotacticity of the converted poly(vinyl acetate) was observed.     

X‐ray photoelectron spectroscopy study of oxygen‐containing polymer [poly(vinyl methyl ether), poly(vinyl methyl ketone), and poly(methyl methacrylate)] surfaces metalized by vacuum‐deposited nickel

Surfaces of poly(vinyl methyl ether) (PVME), poly(vinyl methyl ketone) (PVMK), and poly(methyl methacrylate) (PMMA) were covered with different thicknesses of nickel with a metal‐vapor‐condensation method, and the metal–polymer interfaces were analyzed by X‐ray photoelectron spectroscopy. In the very first steps of the metalization, it was found that a systematic degradation of the polymer surface occurs through CO or CO₂ losses, depending on the polymer functionalities. Then, at the interface with the polymer, the condensed metal reacts by oxidization with the oxygen atoms that are still available after the surface degradation. Nickel oxide is then formed at the interface, whatever the nature of the initial polymer functional group. These new oxide species are not chemically bonded to the polymer structure, and their formation is not affected by the type of bond existing between oxygen and carbon atoms in the original polymer. Finally, the accumulation of metal on the substrate induces an amorphization of the polymer carbon structure because thermal energy is transferred from the metal coating to the polymer. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 40: 82–94, 2002     

SYNTHESIS AND CHARACTERIZATION OF A NEW COMBLIKE POLYMER BASED ON POLY (VINYL METHYL ETHER-ALT-MALEIC ANHYDRIDE) BACKBONE

A new comblike polymer host for polymer electrolyte was synthesized by reactingmonomethyl ether of poly (ethylene glycol) with poly (vinyl methyl ether alt-maleic anhydride)and endcapping the residual carboxylic acid with methanol. Butanone was selected as a solventfor the esterification in order to obtain a completely soluble product. The synthesis processwas traced through by IR. Compared with the model compounds, the presumed structure ofthis comblike polymer has been proved to be valid by ~(13)C NMR. The comb polymer is a whiterubbery solid. It can be dissolved in butanone and THF, and manifests good film formingability.     

Precise synthesis of end‐functionalized thermosensitive poly(vinyl ether)s by living cationic polymerization

A series of poly(2‐methoxyethyl vinyl ether)s with narrow molecular weight distributions and with perfectly defined end groups of varying hydrophobicities was successfully synthesized by base‐assisting living cationic polymerization. The end group was shown to greatly affect the temperature‐induced phase separation behavior of aqueous solutions (lower critical solution temperature‐type phase separation) or organic solutions (upper critical solution temperature‐type phase separation) of the polymers. The cloud points were also influenced largely by the molecular weight and concentration of the polymer. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Microporous poly(vinyl methyl ether) hydrogels prepared by γ-ray irradiation at different heating rates

We prepared thermoresponsive and microporous polymer hydrogels by γ-ray irradiation of aqueous solutions poly(vinyl methyl ether) (PVME) at different heating rates. Under all temperature programs, opaque and heterogeneous PVME gels formed, which swelled at temperatures below the lower critical solution temperature and shrank at temperatures above it. All of the samples contained porous and phase-separated structures. The shape and size of the gel pores varied depending on the temperature programs. Gels having a sponge-like continuous porous structure formed only when the radiation-induced crosslinking was carried out at an optimum heating rate, which we found to be 0.11–0.13°C min⁻¹. For temperature changes between 10°C and 40°C, gels with this structure showed rapid volume transitions on a time scale of about a minute.     

Structural,thermal, and impedance properties of a gel polymer electrolyte containing ionic liquid

The gel polymer electrolytes composed of ionic liquid, 1‐butyl‐3‐methylimidazolium tetrafluoroborate (BMImBF₄) and the copolymer of acrylonitrile (AN), methyl methacrylate (MMA), poly(ethylene glycol) methyl ether methacrylate (PEGMEMA) are synthesized and characterized by FT‐IR spectra, TGA, DSC, and AC impedance measurements. IR spectra show that there is an interaction between PEO side chains of the copolymer and imidazolium cations. TGA measurements indicate that the gel polymer electrolytes are stable until 120°C. By using the equivalent circuit proposed, the experimental data and the simulated data fit very well. The bulk resistance R_b is found to decrease with the increase in BMImBF₄ content. Copyright © 2009 John Wiley & Sons, Ltd.     

NMR studies on the stereospecific polymerization of methyl vinyl ether. Part II. Polymerization by sulfuric acid–aluminum sulfate complex: Enantiomorphic catalyst sites model

Highly crystalline poly(methyl vinyl ether) (PMVE) was produced in toluene in a temperature range of 0 to ?20°C. with the use of sulfuric acid–aluminum sulfate complex (SA catalyst). It was found from the NMR spectra that these polymers contained more than 50% of the triad isotactic fraction and the melting point of the unfractionated polymer was about 130°C. However, PMVE containing a large amount of the isotactic fraction was insoluble in nitromethane, so the triad tacticity of highly crystalline PMVE could not be quantitatively determined. The molecular weight of PMVE increased with increasing conversion and increasing polymerization temperature. This behavior is different from that in metal halide catalysts. Also, the stereoregularity of PMVE decreased with increasing monomer concentration. However, addition of a polar solvent and increasing the polymerization temperature had little effect on the stereoregularity of the polymer. The increase in the isotactic fraction at high catalyst concentration and the difference in the monomer composition in the copolymerization of methyl vinyl ether with 2-chloroethyl vinyl ether by SA catalyst from that obtained by BF₃·O(C₂H₅)₂ suggest that the absorption of MVE on a catalyst surface is an important step in the propagation step by SA catalyst. The fraction of the triad tacticity calculated from the enantiomorphic catalyst sites model⁸ coincided with the experimental results. This fact shows that the steric structure of the adding monomer is determined only by the nature of the catalyst irrespective of the nature of a growing chain end. It is concluded, on considering also the results of the previous paper, that completely different factors can control the steric structure of a polymer even for the same monomer when different catalysts are used.     

Synthesis and characterization of original alternated fluorinated copolymers bearing glycidyl carbonate side groups

A vinyl ether bearing a carbonate side group (2‐oxo‐1,3‐dioxolan‐4‐yl‐methyl vinyl ether, GCVE) was synthesized and copolymerized with various commercially available fluoroolefins [chlorotrifluoroethylene (CTFE), hexafluoropropylene (HFP), and perfluoromethyl vinyl ether (PMVE)] by radical copolymerization initiated by tert‐butyl peroxypivalate. Although HFP, PMVE, and vinyl ether do not homopolymerize under radical conditions, they copolymerized easily yielding alternating poly(GCVE‐alt‐F‐alkene) copolymers. These alternating structures were confirmed by elemental analysis as well as ¹H, ¹⁹F, and ¹³C NMR spectroscopy. All copolymers were obtained in good yield (73–85%), with molecular weights ranging from 3900 to 4600 g mol^?1 and polydispersities below 2.0. Their thermogravimetric analyses under air showed decomposition temperatures at 10% weight loss (T_d,10%) in the 284–330°C range. The HFP‐based copolymer exhibited a better thermal stability than those based on CTFE and PMVE. The glass transition temperatures were in the 15–65°C range. These original copolymers may find potential interest as polymer electrolytes in lithium ions batteries. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Water-soluble ABC triblock copolymers based on vinyl ethers: Synthesis by living cationic polymerization and solution characterization

Water-soluble ABC triblock copolymers of methyl vinyl ether (MVE), ethyl vinyl ether (EVE), and methyl tri(ethylene glycol) vinyl ether (MTEGVE) of various block sequences and carrying 20 monomer units in each block were synthesized by living cationic polymerization. In addition to the triblocks, one AB diblock, one BA diblock, and one statistical copolymer of MVE and MTEGVE carrying 20 units of each type of monomer were synthesized as controls. Moreover, three homopolymers each carrying 20 units of MVE and end groups of varying hydrophobicity were synthesized using three different initiators. The molecular weights and molecular weight distributions of all the polymers were determined by gel permeation chromatography (GPC) in tetrahydrofuran (THF). The number average degrees of polymerization (DP_ns) and composition of all the polymers were calculated by proton nuclear magnetic resonance (¹H-NMR) spectroscopy. The molecular weights and degrees of polymerization corresponded to the values expected from the monomer/initiator ratios. The calculated polydispersities were reasonably narrow at 1.3. Aqueous GPC studies at room temperature on the triblock copolymers showed that the polymers exist as isolated chains (unimers) in solution but they tend to assemble and form micelles in the presence of a sufficiently high salt concentration apparently due to the insolubility of the EVE units under the latter conditions. Triblocks with a different block sequence exhibited a different susceptibility to salt-induced micellization, as indicated by the retention volume of the micelles and the relative micelle/unimer peak areas. Similarly, the cloud points of the triblock copolymers covered a relatively wide temperature range from 56 to 72°C. These differences in micellization and cloud points suggest a profound effect of the location of the hydrophilic MTEGVE block on copolymer association. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 1181–1195, 1997     

Alternating copolymer based on sulfonamide‐substituted phenylmaleimide and vinyl monomers as polymer electrolyte membrane

The alternating copolymerization of phenylmaleimide (PMI) with a pendant sulfonamide acid group (sa‐PMI) and n‐butyl vinyl ether (BVE) as the aliphatic vinyl monomer afforded proton‐conducting polymer electrolytes—sa‐PMI‐BVEs—and their properties were compared with those of sa‐PMI‐STs that were synthesized from sa‐PMI and styrene. The ion exchange capacities (IECs) can be easily controlled by partly replacing sa‐PMI with unsubstituted PMI. sa‐PMI‐BVE is more flexible than sa‐PMI‐ST, and therefore, forms thin membranes even at high IECs, while sa‐PMI‐ST membranes are rigid and brittle. However, sa‐PMI‐BVE exhibits rather low thermal and oxidative stability. To realize polymer electrolyte membranes with reliable mechanical strength and a high IEC, gel‐filled membranes were prepared by polymerization in the presence of a small amount of a crosslinker, divinylbenzene, in porous polytetrafluoroethylene membranes. By using the gel‐filled membrane, H₂/O₂ fuel cells could be operated at 80 °C with reasonable performance. © 2013 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2013     

Radiation-Induced Degradation of a Series of Poly(vinyl Ethers)

The degradative effects of γ-radiation on diethyl ether solutions of poly(alkyl vinyl ethers) under a variety of conditions were studied by polymer molecular weight measurements. Poly(methyl vinyl ether) (PMVE), poly(ethyl vinyl ether) (PEVE), poly(isopropyl vinyl ether) (PIPVE), and poly(isobutyl vinyl ether) (PIBVE) exhibited similar degradative behavior, with G_(SC) values between 0.3 and 0.9 scissions/100 eV at 0°C. Chemically polymerized and radiation-polymerized PEVE samples gave comparable results. Chain degradation was much more pronounced for samples of poly(tert-butyl vinyl ether) (PTBVE) which yielded a G_(SC) value of 3.6 at 0°C. Degradation experiments conducted on PEVE in air resulted in significantly higher rates of scission: G_(SC) = 5.6 scissions/100 eV at 0°C. Chain scission was not measurably influenced by changing the solvent from diethyl ether to di-isopropyl ether. Increased polymer concentration was found to reduce the rate of polymer degradation.     

锂离子电池PMMA-VAc聚合物电解质的制备与性质研究

以甲基丙烯酸甲酯(MMA)和醋酸乙烯酯(VAc)为单体, 用乳液聚合法合成聚甲基丙烯酸甲酯-醋酸乙烯酯聚合物(PMMA-VAc), 并以此聚合物制备了新型聚烯烃膜支撑的聚合物膜及聚合物电解质. 用红外光谱(FTIR)、凝胶色谱(GPC)、差热和热重分析(DSC/TG)、扫描电镜(SEM)及电池充放电实验等方法研究了聚合物、聚合物膜和聚合物电解质的性质. 红外光谱结果表明, MMA与VAc通过各自的C＝C双键打开聚合成PMMA-VAc. PMMA-VAc易于分散在混合碳酸酯溶剂中并形成凝胶, 凝胶粘度随PMMA-VAc浓度的增加而增加, 当浓度为4%时成膜效果最佳. PMMA-VAc膜具有大量的微孔结构, 具有极强的吸液性能. PMMA-VAc膜具有良好的热稳定性: 在380 ℃范围内保持稳定. 聚烯烃膜支撑的PMMA-VAc膜室温下的离子电导率为1.85×10^－3 S•cm^－1, 用作为锂离子电池的聚合物电解质时, 电池具有良好的循环稳定性和倍率性能.