Helical twisting power and compatibility in twisted nematic phase of new chiral liquid crystalline dopants with various liquid crystalline matrices

ABSTRACT

Four chiral dopants exhibiting smectic LC phases themselves were prepared and their helical twisting power (HTP) and thermal phase behaviour in mixtures with four various LC hosts were studied. The influence of host liquid crystal on HTP was evaluated and generally higher values were found for hosts with high birefringence. Unexpectedly, high enhancement was found for an LC-chiral dopant pair, both having a similar aromatic core – biphenyl ring substituted with polar group. All studied chiral dopants exhibited limited compatibility with the LC hosts in twisted nematic phase at room temperature. For one of the studied mixtures, it was able to obtain single twisted nematic phase with selective light reflection band with maximum at wavelength about 1.0 µm. Carboxylic acid-type dopants exhibited total compatibility with the studied host in single twisted nematic phase at elevated temperatures, allowing preparation of mixtures with reflection band in the visible range. In case of the carboxylic acid dopants, blue phases for optimised compositions were observed. Intermolecular hydrogen bonding between carboxylic acid proton and pyridine nitrogen of chiral dopants was found. Doping the LC host with these dopants led to slight enhancement of HTP value and higher solubility in the LC host.     

Retention data from reverse‐phase high‐performance thin‐layer chromatography in characterization of some bis‐salicylic acid derivatives

The chromatographic behaviour of salicylic acid derivatives was investigated using reversed‐phase high performance thin‐layer chromatography (RP HPTLC) with methanol–water and dioxane–water binary mixtures as mobile phase in order to establish relationships between chromatographic data and selected physico‐chemical parameters that are related to ADME (absorption, distribution, metabolism and elimination). Some of the investigated compounds were screened for antioxidant activity. Examination of chromatographic behaviour revealed a linear correlation between R_M values and the volume fraction of mobile phase modifier. Obtained R_M⁰ values were correlated with lipophilicity, solubility, human intestinal absorption, plasma‐protein binding, and blood–brain barrier data. The comparison among chromatographic data obtained by two mobile phase was performed with a statistical technique, principle component analysis. Copyright © 2009 John Wiley & Sons, Ltd.     

Nanoorganization and Phase Behavior of Mixtures of Nicotinic Acid with Dodecylbenzenesulfonic Acid

Abstract

Mesomorphically ordered structures and phase behavior of the mixtures of nicotinic acid (NICA) and dodecylbenzenesulfonic acid (DBSA) were investigated by X‐ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), and polarized optical microscopy (POM). The POM observations revealed that the NICA–DBSA mixtures spontaneously formed liquid crystalline phases, although both NICA and DBSA were not liquid crystalline molecules. The NICA–DBSA mixtures formed ordered lamellar structures in DBSA‐rich mixtures and hexagonal cylinder structure in NICA‐rich mixtures. The mesomorphically ordered structures and optical anisotropy were caused by hierarchical interactions in the NICA–DBSA mixtures. The phase diagram divided into five regions—optically isotropic disordered phase, optically isotropic lamellar phase, optically anisotropic lamellar phase, optically anisotropic cylinder phase, and crystalline solid phase—is drawn by summarizing the XRD and POM results.     

Phase behaviour of mixtures of side‐chain LC polyoxetanes with E7 and their field response

We prepared and characterized a series of side‐chain liquid crystalline (LC) homo‐ and copolyoxetanes containing varying fractions of the mesogenic 4‐decyloxy‐4′‐cyanobiphenyl pendent and the non‐mesogenic propoxy group. The miscibility of homo‐ and copolyoxetanes (Co‐LCPs) with E7 also was studied. The LC properties of the Co‐LCP/E7 mixtures were unique in that, although E7 is a nematic mixture, all the Co‐LCP/E7 mixtures form layered smectic mesophases. Among the mixtures, the composition of 30 wt % of LCP bearing 16 mol. % of the mesogenic pendant, Co(16)‐LCP, and 70 wt % of E7 formed the smectic phase over a broad range of temperature (?70 to 35°C), although the isotropization temperature of Co(16)‐LCP itself was below room temperature. A flexible plastic display was constructed utilizing this mixture and its display characteristics were evaluated. For a device with a 10 µm thick active layer, the threshold voltage was about 30 V and exhibited a rising response time of 200 ms. The most remarkable observation made was that the blends revealed excellent memory behaviour.     

Synthesis and mesomorphic properties of 3-(4-n-alkyloxyarylaminomethylene)chroman-2,4-diones

The synthesis, characterisation and mesomorphic properties of new liquid crystals are reported. The goal was to obtain amides starting from 7-decanoyloxychromone-3-carboxylic acid and 4-n-alkoxyanilines. However, instead of the expected amides, in each case a mixture of two isomeric E/Z enaminones was isolated, with a ratio 3/1. The mesophase behaviour of the five mixtures was characterised and studied using differential scanning calorimetry and polarising optical microscopy. The transitions are enantiotropic, the peaks being sharp and the mesomorphic range wide. All the compounds exhibit a smectic C phase and the derivatives with shorter chains also exhibit a nematic phase.     

Analysis of amino acids using serially coupled columns

Single conventional columns in reversed‐phase liquid chromatography are insufficient for analysing the isoindoles of primary amino acids due to their limited functionality. An interesting possibility for increasing the separation power is the combination of several columns of different nature, where the length is modified by coupling small segments. This approach may require a considerable investment to have multiple lengths for each stationary phase. However, the combination of only two columns of fixed length can be enough to resolve satisfactorily relatively complex mixtures, provided that an optimised gradient program is applied. In this work, a mixture of 19 primary amino acid isoindoles found in proteins was analysed. Four stationary phases were assayed: C18, pentafluorophenyl‐C18, C4 and cyano. The mixture of isoindoles was successfully resolved in practical times using a pentafluorophenyl‐C18 column coupled to a C4 column, in spite of the extremely poor performance obtained when each column is used isolatedly, independently of the length. The extreme diversity in the polarities of the isoindoles and the need of extrapolating the retention behaviour in certain regions of the solvent content domain makes the modelling of the retention behaviour of the isoindoles particularly difficult. Nevertheless, the predicted optimal separations were very satisfactory.     

Fracture toughening of epoxy matrices with blends of resins of different molecular weights and other modifiers

The microstructure and fracture behavior of epoxy mixtures containing two monomers of different molecular weights were studied. The variation of the fracture toughness by the addition of other modifiers was also investigated. Several amounts of high‐molecular‐weight diglycidyl ether of bisphenol A (DGEBA) oligomer were added to a nearly pure DGEBA monomer. The mixtures were cured with an aromatic amine, showing phase separation after curing. The curing behavior of the epoxy mixtures was investigated with thermal measurements. A significant enhancement of the fracture toughness was accompanied by slight increases in both the rigidity and strength of the mixtures that corresponded to the content of the high‐molecular‐weight epoxy resin. Dynamic mechanical and atomic force microscopy measurements indicated that the generated two‐phase morphology was a function of the content of the epoxy resin added. The influence of the addition of an oligomer or a thermoplastic on the morphologies and mechanical properties of both epoxy‐containing mixtures was also investigated. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 3920–3933, 2004     

Physical properties of two systems with induced antiferroelectric phase

Two ferroelectric three‐ring chiral esters, one with a partially fluorinated alkyl chain and another with a cyano terminal group, were mixed with a structurally similar compound having an alkyl terminal chain. In their mixtures an antiferroelectric phase was induced. The phase behaviour, spontaneous polarisation, tilt angle, smectic layer spacing and helical pitch of both systems were determined. The mechanism of the induction of an antiferroelectric phase is different in both cases, with highly tilted phases in former system and less tilted phases in the latter.     

Synthesis and characterization of electrical conducting porous carbon structures based on resorcinol–formaldehyde

Electrical conducting carbon (ECC) porous structures were explored by changing the pyrolysis temperature of organic xerogel compounds prepared by sol–gel method from resorcinol–formaldehyde (RF) mixtures in acetone using picric acid as catalyst. The effect of this preparation parameter on the structural and electrical properties of the obtained ECCs was studied. The analysis of the obtained results revealed that the polymeric insulating xerogel phase was transformed progressively with pyrolysis temperature into carbon conducting phase; this means the formation of long continuous conducting path for charge carriers to move inside the structure with thermal treatment and the samples exhibited tangible percolation behaviour where the percolation threshold can be determined by pyrolysis temperature. The temperature-dependent conductivity of the obtained ECC structures shows a semi-conducting behaviour and the I(V) characteristics present a negative differential resistance. The results obtained from STM micrographs revealed that the obtained ECC structures consist of porous electrical conducting carbon materials.     

Thermal Behaviour of Blends of HDPE with Long-chain Branched HBPE

The thermal behaviour of new blends on the base of high-density polyethylene (HDPE) and of long-chain branched polyethylenes (HBPE) made by means of new metallocene catalysts has been studied by DSC in relation to the melting and crystallisation characteristics and discussed in the phase behaviour of the mixtures. While HBPE's with 7.5 to 12 per cent by mass of octene as comonomer in the blends with HDPE are relevant for the formation of homogeneous composition regions. Especially, with higher HBPE contents, the phase separation and splitting of the melting and crystallisation peaks is observed. This behaviour has not been observed with 2 per cent by mass of octene in HBPE. The dependence of the melting and crystallisation temperatures of HDPE/HBPE blends on the octene content of the HBPE's for constant composition of mixtures have been shown for both the homogeneous and heterogeneous mixing. Blends of a high-molecular HDPE and a HBPE resulted in a reduction of the composition range not effected by phase separation. This revised version was published online in July 2006 with corrections to the Cover Date.     

Different stability‐indicating chromatographic methods for specific determination of paracetamol,dantrolene sodium,their toxic impurities and degradation products

A well‐known analgesic (paracetamol, PAR) and skeletal muscle relaxant [dantrolene sodium (DNS)] have been analyzed without interference from their toxic impurities and degradation products. The studied PAR impurities are the genotoxic and nephrotoxic p‐amino phenol (PAP) and the hepatotoxic and nephrotoxic chloroacetanilide, while 5‐(4‐nitrophenyl)‐2‐furaldehyde is reported to be a mutagenic and carcinogenic degradation product of DNS. The five studied components were determined and quantified by TLC–densitometric and RP‐HPLC methods. TLC–densitometry (method 1) used TLC silica gel and chloroform–ethyl acetate–acetic acid–triethylamine (7:3:0.5:0.05, by volume) as the mobile phase with UV scanning at 230 nm, while RP‐HPLC (method 2) was based on separation on a C₁₈ column using methanol–water (55:45, v/v pH 3 with aqueous formic acid) as mobile phase at 1 mL/min and detection at 230 nm. The developed methods were used for determination and quantification of the five studied components in different laboratory‐prepared mixtures. The were also applied for analysis of Dantrelax^® compound capsules where no interference among the studied components with each other or from excipients was observed. The methods were validated as per International Conference on Harmonization guidelines, and they compared favorably with the reported ones.     

The separation of dimethylarsinic acid,methylarsonous acid,methylarsonic acid,arsenate and dimethylarsinous acid on the Hamilton PRP‐X100 anion‐exchange column

In order to separate the potential arsenite metabolites methylarsonous acid and dimethylarsinous acid from arsenite, arsenate, methylarsonic acid and dimethylarsinic acid, the pH‐dependent retention behaviour of all six arsenic compounds was studied on a Hamilton PRP‐X100 anion‐exchange column with 30 mM phosphate buffers (pH 5, 6, 7, 8 and 9) containing 20% (v/v) methanol as mobile phase and employing an inductively coupled plasma atomic emission spectrometer (ICP–AES) as the arsenic‐specific detector. Baseline separation of dimethylarsinic acid, methylarsonous acid, methylarsonic acid, arsenate and dimethylarsinous acid was achieved with a 30 mmol dm⁻³ phosphate buffer (pH 5)–methanol mixture (80:20, v/v) in 25 min. Arsenite is not baseline‐separated from dimethylarsinic acid under these conditions. Copyright © 1999 John Wiley & Sons, Ltd.     

Size‐exclusion chromatographic NMR of polymer mixtures

The use of chromatographic stationary phases or solvent modifiers to modulate diffusion properties in NMR experiments is now well established. Their use can be to improve resolution in the diffusion domain or to provide an insight into analyte–modifier interactions and, hence, the chromatography process. Here, we extend previous work using size‐exclusion chromatographic stationary phases to the investigation of polymer mixtures. We demonstrate that similar diffusion modulation behaviour is observed with a size‐exclusion chromatographic stationary phase that can be understood in terms of size‐exclusion behaviour. Copyright © 2014 John Wiley & Sons, Ltd.     

Two‐step crystal–crystal phase transformation of N‐salicylidene‐p‐aminobenzoic acid by gas–solid reaction with aqua–ammonia vapour

Crystal–crystal phase transformation by external stimuli has attracted significant attention for application in switchable materials, which can change their structures and properties. Herein, it is revealed that N‐salicylidene‐p‐aminobenzoic acid crystals undergo a two‐step crystal–crystal phase transformation through a gas–solid reaction with aqua–ammonia vapour. The photochromic behaviour of the crystals switched from nonphotochromic to photochromic and back to nonphotochromic via a phase transformation. The two‐step phase transformation and photochromic behaviour change were characterized and correlated by X‐ray crystal structure analysis, UV–Vis spectroscopy, differential scanning calorimetry and scanning electron microscopy. This article is the first report to capture the stepwise structural change in the gas–solid (acid–base) reaction of ammonia with benzoic acid derivatives.     

Photochromism in mixtures of liquid crystalline chiral copolymers with a photosensitive chiral dopant

Mixtures of a photosensitive chiral dopant based on ( )-menthone with left-handed and righthanded cholesteric copolymers were prepared. The phase behaviour and optical properties of the mixtures prepared were studied. The action of UV radiation on planar oriented films of such systems was shown to induce dramatic changes in the maximum reflection wavelength as a result of E-Z isomerization of the dopant molecules. The kinetics of photoisomerization of such mixtures in solution and in the bulk were investigated at different temperatures. The above mixtures can be considered as promising and uprecedented materials for coloured data recording and storage.     

Modelling the thermal behaviour of carboxylic acid derivatives with cylcodextrins in the solid-state

The application of classical QSAR and molecular modelling to the inclusion complexation of natural and modified cyclodextrins (CDs) with carboxylic acid derivatives as guest molecules was examined. Information was available on the thermal behaviour, in the solid-state of benzoic acid (BA), salicylic acid (SA), and various substituted aminosalicylic acids (3-aminosalicylic acid, 3-ASA, 4-aminosalicylic acid, 4-ASA and 5-aminosalicylic acid, 5-ASA), as well as on the thermal behaviour of 1:1 molar ratio physical and kneaded mixtures of these acids with each of three different cyclodextrins, β-, (BCD) 2-hydroxypropyl-β-, (HPBCD) and γ-cyclodextrin (GCD). The thermal behaviour of the binary (1:1 stoichiometry) mixtures was modelled using stepwise multiple regression (SMR). Two models for the prediction of the percentage mass loss and enthalpy of dehydration of the physical mixtures were established with correlation coefficients (r) of 0.79 and 0.92, respectively. Decreased correlation in the thermal behaviour of kneaded mixtures indicated significant interaction and possible formation of inclusion complexes. This revised version was published online in July 2006 with corrections to the Cover Date.     

pH-thermoreversible hydrogels. I. Synthesis and characterization of poly(N-isopropylacrylamide/maleic acid) copolymeric hydrogels

N-isopropylacrylamide (NIPAAM)/maleic acid (MA) copolymeric hydrogels were prepared by irradiating the ternary mixtures of NIPAAM/MA/Water by γ-rays at ambient temperature. The influence of external stimuli such as pH and temperature of the swelling media on the equilibrium swelling properties was investigated. The hydrogels showed both temperature and pH responses. The effect of comonomer concentration and irradiation dose on the swelling equilibria and phase transition was studied. For the characterization of these hydrogels, the diffusion behaviour and molecular weight between crosslinks were investigated.     

Amphotropic liquid-crystalline behaviour of glycolipids in amino acid ionic liquids

We examined lyotropic liquid-crystalline behaviour of glycolipids (GLs) with a normal alkyl chain or a diacetylene-functionalised alkyl chain in several amino acid ionic liquids (AAILs). It was found that the mixtures of GL and AAIL form various nanosegregated liquid-crystalline phases, such as smectic, bicontinuous cubic and hexagonal columnar phases, depending on the two-component ratio and AAIL species. The observed liquid-crystalline behaviours were summarised as phase diagrams. It is noteworthy that the employment of amino acid anions with superior hydrogen-bonding ability, such as aspartic and glutamic acid anions, gives a phase diagram with a wide liquid-crystalline region. Comparing with a phase diagram obtained for the GL/water mixtures, we gained insights on the similarity/dissimilarity between water and AAILs as self-organisation media of amphiphiles. For the diacetylene-functionalised molecule, UV irradiation was carried out to progress polymerisation. It is of interest that the polymerisation reaction progressed when the glycolipid formed a smectic phase in an AAIL while a reaction progress was not found when it formed a bicontinuous cubic phase in another AAIL. We believe that AAILs have a great potential to be a liquid media not only for amphiphiles but for various functional materials, such as polymers and colloids, to form novel assemblies.     

Electro-optic and dielectric properties of new binary ferroelectric and antiferroelectric liquid crystalline mixtures

Several new binary liquid crystalline mixtures have been designed and their properties were studied by complementary methods. It has been shown that even both pure components used for the mixture design possess the ferroelectric behaviour; the induced antiferroelectric smectic phase has been detected for one of the prepared mixtures. The phase diagram has been constructed and the existence of the antiferroelectric phase was confirmed by switching time and dielectric spectroscopy measurements. Some of the resulted mixtures possess very high values of the tilt angle that reaches close below 45° degrees at saturation. Values of spontaneous polarisation were found within 50–200 nC/cm² in dependence of the mixture’s composition. Due to specific properties, the obtained mixtures might be interesting for further design of multicomponent mixtures and formulation of the advanced nanocomposite systems.     

Analysis of polar peptides using a silica hydride column and high aqueous content mobile phases

The retention behavior of a set of polar peptides separated on a silica hydride stationary phase was examined with a capillary HPLC system coupled to ESI‐MS detection. The mobile phases consisted of formic acid or acetic acid/acetonitrile/water mixtures with the acetonitrile content ranging from 5 to 80% v/v. The effects on peptide retention of these two acidic buffer additives and their concentrations in the mobile phase were systematically investigated. Strong retention of the peptides on the silica hydride phase was observed with relatively high‐organic low‐aqueous mobile phases (i.e. under aqueous normal‐phase conditions). However, when low concentrations of acetic acid were employed as the buffer additive, strong retention of the peptides was also observed even when high aqueous content mobile phases were employed. This unique feature of the stationary phase therefore provides an opportunity for chromatographic analysis of polar peptides with water‐rich eluents, a feature usually not feasible with traditional RP sorbents, and thus under conditions more compatible with analytical green chemistry criteria. In addition, both isocratic and gradient elution procedures can be employed to optimize peptide separations with excellent reproducibility and resolution under these high aqueous mobile phase conditions with this silica hydride stationary phase.