Herein the reactivity of the enzyme α‐chymotrypsin in the confinement of polystyrene‐block‐poly(acrylic acid) (PS‐b‐PAA) vesicles was investigated. Enzyme and substrate molecules were encapsulated in PS‐b‐PAA vesicles with internal diameters ranging from 26 nm to 165 nm during the formation of the vesicles. While the loading efficiencies of enzyme and substrate molecules were practically identical for vesicles of identical size, they were found to increase with decreasing vesicle size. The kinetics of the α‐chymotrypsin catalyzed hydrolysis of N‐succinyl‐Ala‐Ala‐Phe‐7‐amido‐4‐methylcoumarin (AMC) was evaluated following the increase of the absorption of the product 7‐amino‐4‐methylcoumarin by UV/Vis spectroscopy. The values of the catalytic turnover number obtained for reactions inside vesicles with different sizes showed an increase of up to fourteen times compared to the bulk value with decreasing vesicle volume, while the values of the Michaelis–Menten constant decreased, respectively. This increase in reactivity of α‐chymotrypsin is attributed to the effect of vesicle–wall interactions in the finite encapsulated space, where the reagents could diffuse, leading to enhanced collision frequencies.相似文献
The step‐wise solution self‐assembly of double crystalline organometallic poly(ferrocenyldimethylsilane)‐block‐poly(2‐iso‐propyl‐2‐oxazoline) (PFDMS‐b‐PiPrOx) diblock copolymers is demonstrated. Two block copolymers are obtained by copper‐catalyzed azide‐alkyne cycloaddition (CuAAC), featuring PFDMS/PiPrOx weight fractions of 46/54 (PFDMS30‐b‐PiPrOx75) and 30/70 (PFDMS30‐b‐PiPrOx155). Nonsolvent induced crystallization of PFDMS in acetone leads in both cases to cylindrical micelles with a PFDMS core. Afterward, the structures are transferred into water for sequential temperature‐induced crystallization of the PiPrOx corona, leading to hierarchical double crystalline superstructures, which are investigated using scanning electron microscopy, wide angle X‐ray scattering, and differential scanning calorimetry.
While network‐like assemblies are formed by amphiphilic polyphosphazenes with poly(N‐isopropylacrylamide) and ethyl tryptophan as side groups in aqueous solution, a significant morphology transformation is observed when small molecules that exhibit hydrogen‐bonding interactions with amphiphilic copolymers are introduced during the preparation of polymeric assemblies through a dialysis procedure. Depending on copolymer composition and the content of small molecules introduced, aggregates ranging from general vesicles, high‐genus vesicles, to well‐defined nanospheres can be prepared successfully as clearly evidenced by TEM observation, which suggests this procedure should be a novel approach to prepare composite vesicles.
Here, the formation of giant enzyme‐degradable polymersomes using the electroformation method is reported. Poly(ethylene glycol)‐block‐poly(ε‐caprolactone) polymersomes have been shown previously to be attractive candidates for the detection of bacterial proteases and protease mediated release of encapsulated reporter dyes and antimicrobials. To maximize the efficiency, the maximization of block copolymer (BCP) vesicle size without compromising their properties is of prime importance. Thus, the physical‐chemical properties of the BCP necessary to self‐assemble into polymeric vesicles by electroformation are first identified. Subsequently, the morphology of the self‐assembled structures is extensively characterized by different microscopy techniques. The vesicular structures are visualized for giant polymersomes by confocal laser scanning microscopy upon incorporation of reporter dyes during the self‐assembly process. Using time correlated single photon counting and by analyzing the fluorescence decay curves, the nanoenvironment of the encapsulated fluorophores is unveiled. Using this approach, the hollow core structure of the polymersomes is confirmed. Finally, the encapsulation of different dyes added during the electroformation process is studied. The results underline the potential of this approach for obtaining microcapsules for subsequent triggered release of signaling fluorophores or antimicrobially active cargo molecules that can be used for bacterial infection diagnostics and/or treatment. 相似文献
The synthesis of symmetric cyclo poly(ε‐caprolactone)–block–poly(l (d )‐lactide) (c(PCL–b–PL(D)LA)) by combining ring‐opening polymerization of ε‐caprolactone and lactides and subsequent click chemistry reaction of the linear precursors containing antagonist functionalities is presented. The two blocks can sequentially crystallize and self‐assemble into double crystalline spherulitic superstructures. The cyclic chain topology significantly affects both the nucleation and the crystallization of each constituent, as gathered from a comparison of the behavior of linear precursors and cyclic block copolymers. The stereochemistry of the PLA block does not have a significant effect on the nonisothermal crystallization of both linear and cyclo PCL‐b‐PDLA and PCL‐b‐PLLA copolymers.
New amphiphilic graft copolymers that have a poly(ε‐caprolactone) (PCL) biodegradable hydrophobic backbone and poly(4‐vinylpyridine) (P4VP) or poly(2‐(N,N‐dimethylamino)ethyl methacrylate) (PDMAEMA) hydrophilic side chains have been prepared by anionic polymerization of the corresponding 4VP and DMAEMA monomers using a PCL‐based macropolycarbanion as initiator. The water solubility of these amphiphilic copolymers is improved by quaternization, which leads to fully water‐soluble cationic copolymers that give micellar aggregates in deionized water with diameters ranging from 65 to 125 nm. In addition, to improve the hydrophilicity of PCL‐g‐P4VP, grafting of poly(ethylene glycol) (PEG) segments has been carried out to give a water‐soluble double grafted PCL‐g‐(P4VP;PEG) terpolymer.
This study of 3‐(5‐phenyl‐1,3,4‐oxadiazol‐2‐yl)‐2H‐chromen‐2‐one, C17H10N2O3, 1 , and 3‐[5‐(pyridin‐4‐yl)‐1,3,4‐oxadiazol‐2‐yl]‐2H‐chromen‐2‐one, C16H9N3O3, 2 , was performed on the assumption of the potential anticancer activity of the compounds. Three polymorphic structures for 1 and two polymorphic structures for 2 have been studied thoroughly. The strongest intermolecular interaction is stacking of the `head‐to‐head' type in all the studied crystals. The polymorphic structures of 1 differ with respect to the intermolecular interactions between stacked columns. Two of the polymorphs have a columnar or double columnar type of crystal organization, while the third polymorphic structure can be classified as columnar‐layered. The difference between the two structures of 2 is less pronounced. Both crystals can be considered as having very similar arrangements of neighbouring columns. The formation of polymorphic modifications is caused by a subtle balance of very weak intermolecular interactions and packing differences can be identified only using an analysis based on a study of the pairwise interaction energies. 相似文献
In the title compound, poly[hexaaquabis[μ4‐3,5‐bis(carboxylatomethoxy)benzoato]trizinc(II)], [Zn3(C11H7O8)2(H2O)6]n, there are two crystallographically distinct ZnII cations which are bridged by polycarboxylate ligands in a μ4‐bridging mode. A pair of ligands bridges adjacent Zn atoms to give centrosymmetric dimetal building blocks which act as four‐connected nodes to be further interlinked into a two‐dimensional double‐layered framework with (4,4) topology. Other Zn atoms, lying on inversion centres, occupy the cavities of this topological structure. This submission shows a versatile polycarboxylate ligand with rigid and flexible functional groups, the co‐operation and complementarity of which would meet the coordination requirements of a variety of topological structures. 相似文献
Fluorescent vesicles considered as a mimic of natural primitive cells are prepared from poly(3‐hexylthiophene)‐block‐poly(3‐O‐methacryloyl‐D‐galactopyranose) P3HT‐b‐PMAGP copolymers. The unique characteristic of such vesicular nanostructures is their architecture, which comprises a hydrophobic π‐conjugated P3HT wall stabilized by a hydrophilic PMAGP interface featuring glucose units. The results of this work offer a very efficient and straightforward method for engineering well‐controlled fluorescent nanoparticles (without the addition of dyes), which provide an excellent support to the study of carbohydrate‐protein interactions.
In order to improve the stability of polymeric vesicles, supramolecular vesicles are developed via self‐assembly of the inclusion of γ‐cyclodextrin (γ‐CD) and 1‐pyrenemethyl palmitate (Py‐pal). The inclusion has one hydrophilic head and double hydrophobic tails, which looks like the phospholipid. From the transmission electron microscopy (TEM) image, it can be observed that the average diameter of supramolecular vesicles is approximately 55 nm and there is a huge cavity in supramolecular vesicles. Due to the photo‐breakable ester of Py‐pal, supramolecular vesicles are broken under UV irradiation. Supramolecular vesicles are used as UV‐responsive drug carriers to release the hydrophilic drug such as doxorubicin hydrochloride (DOX•HCl).
Hybrid nanocrystals of PVBA‐b ‐PS/ZIF‐8 were prepared by the growth of ZIF‐8 on the surface of the self‐assembled structures from poly(p ‐vinylbenzoic acid)‐block‐polystyrene. Two different morphologies—micelles and vesicles—were obtained in selective solvents owing to the different ratios of PVBA to PS blocks. The structure and morphology of the PVBA‐b ‐PS/ZIF‐8 composites were characterized by Fourier transform IR spectroscopy, thermogravimetric analysis, X‐ray diffraction, transmission electron microscopy and scanning electron microscopy. PVBA‐b ‐PS/ZIF‐8 showed high catalytic performance in Knoevenagel condensation reactions at room temperature, which were attributed to the more exposed active sites of the small ZIF‐8 nanocrystals grown in a confined space and a high concentration of reactants in the polymeric aggregates. 相似文献
The title isomers, viz. the N‐(3‐methylphenyl)‐, (I), and N‐(2‐methylphenyl)‐, (II), derivatives, both C26H28N2O4S, adopt an E configuration that places the thiophene and trimethoxyphenyl groups on opposite sides of the C=N double bond, providing a suitable orientation for formation of an intramolecular N—H...N hydrogen bond. However, while the molecule in (I) is close to being planar, the N‐methylphenyl group in (II) is twisted significantly from the plane of the remainder of the molecule. Both crystal structures are essentially layered and there are no intermolecular N—H...O hydrogen bonds. Compound (I) has a significantly higher calculated density than (II) (1.340 cf 1.305 Mg m−3), indicating that the molecular packing in the meta isomer is overall more efficient than that in the ortho isomer. 相似文献