The peculiarities of sorbtion mechanism of phenole molecules by films of PVA‐PAAN interpolymer complex

The peculiarities of sorbtion mechanism of phenole molecules by poly(vinylalcohol) and poly(acrylamide) (PVA‐PAA_N) films are examined. An analytical model of absorbtion process based on diffusive character of penetration of phenole molecules in polymer film with the following spontaneous capturing by selftuning traps is proposed. The analytical results can be easy compared with experimental data obtained by spectrophotometry method. The comparison of theory and experiment gives the average value of resulting diffusion lenght of phenole molecule during «free» life‐time <l>∼10⁻⁶ cm.     

Direct Synthesis of PVA‐g‐PDMS in Microsuspension

The synthesis of P(VA‐co‐VAc)‐graft‐PDMS copolymers has been achieved in microsuspension by direct reaction between an epoxy‐terminated PDMS and some pendant alcohol groups in P(VA‐co‐VAc). In this synthesis, the copolymer is used both as dispersant and reactant. The hydrophilic/hydrophobic character of the final material can be varied at will by incorporating various contents of epoxy‐functionalized PDMS through optimized reaction conditions. The final composition was determined by TGA and ¹H NMR. Products prepared from monofunctional PDMS were easily redispersed in water whereas a film of crosslinked materials, arising from difunctional PDMS, showed the best waterproofing as shown by contact angle analysis.

     

Luminescent transition metal complexes as sensors: structural effects on pH response

A series of luminescent transition metal complexes using the pH-sensitive ligand 5-carboxy-1,10-phenanthroline has been synthesized and characterized. The complexes, based on Ru(II) and Re(I), show monotonic changes in both luminescent intensity and lifetime with pH values over the range 2 < pH < 9. The impact of various structural features on both the range of pH sensitivity and dynamic response was studied using both intensity and lifetime measurements. It was possible to predictably tune the pH sensitivity range over about 1.5 pKa units. While significant variation in the dynamic response range was observed, the correlation with structural features needs further study.     

Mordenite-incorporated PVA–PSSA membranes as electrolytes for DMFCs

Composite membranes with mordenite (MOR) incorporated in poly vinyl alcohol (PVA)–polystyrene sulfonic acid (PSSA) blend tailored with varying degree of sulfonation are reported. Such a membrane comprises a dispersed phase of mordenite and a continuous phase of the polymer that help tuning the flow of methanol and water across it. The membranes on prolonged testing in a direct methanol fuel cell (DMFC) exhibit mitigated methanol cross-over from anode to the cathode. The membranes have been tested for their sorption behaviour, ion-exchange capacity, electrochemical selectivity and mechanical strength as also characterized by Fourier transform infrared spectroscopy and thermogravimetric analysis. Water release kinetics has been measured by magnetic resonance imaging (NMR imaging) and is found to be in agreement with the sorption data. Similarly, methanol release kinetics studied by volume-localized NMR spectroscopy (point resolved spectroscopy, PRESS) clearly demonstrates that the dispersion of mordenite in PVA–PSSA retards the methanol release kinetics considerably. A peak power-density of 74 mW/cm² is achieved for the DMFC using a PVA–PSSA membrane electrolyte with 50% degree of sulfonation and 10 wt.% dispersed mordenite phase. A methanol cross-over current as low as 7.5 mA/cm² with 2 M methanol feed at the DMFC anode is observed while using the optimized composite membrane as electrolyte in the DMFC, which is about 60% and 46% lower than Nafion-117 and PVA–PSSA membranes, respectively, when tested under identical conditions.     

Mechanically Robust and Transparent N‐Halamine Grafted PVA‐co‐PE Films with Renewable Antimicrobial Activity

Antimicrobial polymeric films that are both mechanically robust and function renewable would have broad technological implications for areas ranging from medical safety and bioengineering to foods industry; however, creating such materials has proven extremely challenging. Here, a novel strategy is reported to create high‐strength N‐halamine incorporated poly(vinyl alcohol‐co‐ethylene) films (HAF films) with renewable antimicrobial activity by combining melt radical graft polymerization and reactive extrusion technique. The approach allows here the intrinsically rechargeable N‐halamine moieties to be covalently incorporated into polymeric films with high biocidal activity and durability. The resulting HAF films exhibit integrated properties of robust mechanical strength, high transparency, rechargeable chlorination capability (>300 ppm), and long‐term durability, which can effectively offer 3–5 logs CFU reduction against typical pathogenic bacterium Escherichia coli within a short contact time of 1 h, even at high organism conditions. The successful synthesis of HAF films also provides a versatile platform for exploring the applications of antimicrobial N‐halamine moieties in a self‐supporting, structurally adaptive, and function renewable form.

     

Revisit to the photocrosslinking behavior of PVA‐SbQ as a water‐soluble photopolymer with anomalously low contents of quaterized stilbazol side chains

The photocrosslinking behavior of poly(vinyl alcohol) (PVA) substituted with 0.1, 0.3, 1.3, and 4.0 mol % of styrylpyridinium (SbQ) (PVA‐SbQs) side chains was reinvestigated. Even‐order derivative spectra of films of PVAs loaded with 0.1 and 0.3 mol % of SbQ revealed the presence of subpeaks owing to vibrational transitions, whereas PVA bearing 1.3 and 4.0 mol % of SbQ displayed a new blue‐shifted band (H‐band) at 328 nm due to H‐aggregation. Changes in derivative spectra disclosed the rapid disappearance of the H‐band of PVA‐SbQs under UV irradiation within exposure doses of 10 mJ cm^?2. On the other hand, the films of the PVA‐SbQs were insolubilized upon UV irradiation at exposure doses of 2 and 3 mJ cm^?2, respectively, leading to the conclusion that the high photosensitivity comes from the photodimerization of H‐aggregate as a ground‐state dimer. Fluorescence measurements implied the presence of J‐aggregate at 386 nm, but the involvement of the J‐aggregation in photocrosslinking was excluded because of its negligible fraction. A photosensitive emulsion of poly(vinyl acetate) emulsified with PVA‐SbQ exhibited similar changes in higher‐order derivative spectra in film and applied to fabricate a stencil for screen printing with aid of an LED‐emitting 375 nm light. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Analytical chemistry with optical sensors

Summary Recent advances in opto-electronics, (fiber) optics, and optical spectroscopy have led to the development of a fascinating new chemical sensor technique. The present state of the art in optical sensing technology is briefly described in this review. Major advantages of this type of sensor over others include cheapness, ease of miniaturization and the renunciation of reference cells. Among the disadvantages, mention should be made of interference by ambient light, comparatively small analytical ranges, lack of specificity and lack of low-priced lasers.Potential fields of application include environmental control, process control (as, for instance, in chemical plants and bioreactors), remote sensing via long optical fibers or even from aircraft or satellites, and biomedical applications. Representative sensor types are described in some detail and potential future trends are discussed.

---

Analytische Chemie mit Hilfe optischer Sensoren

Zusammenfassung Fortschritte auf dem Gebiet der Opto-Elektronik, (Faser)optik, und optischen Spektroskopie haben zur Entwicklung einer faszinierenden neuen Technik für chemische Sensoren geführt. In diesem Artikel wird der gegenwärtige Stand auf dem Gebiet der optischen Sensortechnologie beschrieben. Die Hauptvorteile dieses Sensortyps gegenüber anderen liegt in den günstigen Kosten, der leichten Miniaturisierbarkeit, und dem Verzicht auf eine Referenz-Zelle. Von den Nachteilen sind zu erwähnen die Störungen durch Umgebungslicht, vergleichsweise kleine analytische Bereiche, geringe Spezifität, und der Mangel an billigen Laserlichtquellen.Potentielle Anwendungsgebiete sind die Umweltkontrolle, Prozeßkontrolle (etwa in chemischen Fabriken oder Bioreaktoren), die Verfolgung von analytischen Parametern über große Entfernungen, etwa mit Hilfe von langen Lichtleitern oder sogar von Flugzeugen oder Satelliten, und biomedizinische Anwendungen. Einige repräsentative Sensortypen werden etwas genauer beschrieben und potentielle Zukunftsentwicklungen diskutiert.

     

Neutral cuprous complexes as ratiometric oxygen gas sensors

Four neutral mononuclear Cu(I) complexes, [Cu(pyin)(PPh(3))(2)] (1a), [Cu(pyin)(DPEphos)] (1b), [Cu(quin)(PPh(3))(2)] (2a) and [Cu(quin)(DPEphos)] (2b) (Hpyin = 2-(2-pyridyl)indole, Hquin = 2-(2-quinolyl)indole and DPEphos = bis(2-(diphenylphosphino)phenyl)ether) have been synthesized. X-Ray crystal structure analysis revealed that the central Cu(I) ion in all complexes is in a distorted tetrahedral coordination environment. All four complexes display the typical metal-to-ligand charge transfer (MLCT) absorption band at 371, 363, 413 and 402 nm, respectively. No emission was observed from any complexes in the solid state due to triplet-triplet annihilation. However, the complexes show unusual dual-emission originating from intraligand charge-transfer (ILCT) and MLCT transitions, when dispersed in a rigid matrix (e.g. PMMA) or in frozen CH(2)Cl(2). The oxidation potential of Cu(I)/Cu(II) in these neutral complexes, ～0.5 V (vs. Ag/AgCl), is lower than those of cationic Cu(I) complexes. Films containing 10 wt% of these complexes in PMMA shows ratiometric fluorescent oxygen gas sensing property with a response ratio of 0.3-3.2 and response time of 3-4 s. Complex 2b acts as a ratiometric oxygen gas sensor with good reversibility through energy and electron transfer mechanisms under the loss of a counteranion.     

Nonlinear optical molecular switches as selective cation sensors

This work demonstrates that the recognition of cations by molecular switches can give rise to large contrasts of the second-order nonlinear optical (NLO) properties, which can therefore be used as a powerful and multi-usage detection tool. The proof of concept is given by evidencing, by means of ab initio calculations, the ability of spiropyran/merocyanine systems to selectively detect alkali, alkaline earth, and transition-metal cations.     

3D‐Printed Titanium Cage with PVA‐Vancomycin Coating Prevents Surgical Site Infections (SSIs)

Many coating materials have been studied to prevent surgical site infections (SSIs). However, antibacterial coating on surfaces show weak adhesion using the traditional titanium (Ti) cage, resulting in low efficacy for preventing SSIs after spinal surgery. Herein, a 3D‐printed Ti cage combined with a drug‐releasing system is developed for in situ drug release and bacteria killing, leading to prevention of SSIs in vitro and in vivo. First, a 3D‐printed Ti cage is designed and prepared by the Electron Beam Melting (EBM) method. Second, polyvinyl alcohol (PVA) containing hydrophilic vancomycin hydrochloride (VH) is scattered across the surface of 3D‐printed porous Ti (Ti‐VH@PVA) cages. Ti‐VH@PVA cages show an efficient drug‐releasing profile and excellent bactericidal effect for three common bacteria after more than seven days in vitro. In addition, Ti‐VH@PVA cages exhibit reliable inhibition of inflammation associated with Staphylococcus aureus and effective bone regeneration capacity in a rabbit model of SSIs. The results indicate that Ti‐VH@PVA cages have potential advantages for preventing SSIs after spinal surgery.     

Cleaning requirements for silica‐coated sensors used in optical waveguide lightmode spectroscopy

Optical waveguide lightmode spectroscopy (OWLS), based on the incoupling of laser light into a waveguide sensor by an optical grating, allows for the in situ measurement of protein adsorption. Few reports have described cleaning methods for the surfaces of such sensors, and in this investigation, we compare common methods for cleaning of silica surfaces in relation to their effectiveness for cleaning silica‐coated waveguide sensors used in OWLS. For this purpose, atomic force microscopy (AFM) analysis of surface morphology and OWLS detection of protein adsorption kinetics were used to evaluate waveguide sensors before and after cleaning. While AFM line scans showed a substantial increase in average waveguide peak‐to‐valley height after RCA cleaning relative to all other methods tested, chemical etching owing to the alkaline component of the rolling circle amplification method rendered the waveguide unusable for detection of protein adsorption with OWLS. A revised method, based on replacement of the alkaline step with immersion in sodium dodecyl sulfate, was not only effective at cleaning OWLS waveguides off‐the‐shelf but also showed excellent protein adsorption reproducibility after ex situ cleaning. Moreover, the revised method showed excellent reproducibility when applied in situ, between repeated adsorption‐elution cycles. Copyright © 2013 John Wiley & Sons, Ltd.     

Novel fused-LEDs devices as optical sensors for colorimetric analysis

The development of a novel, low power optical sensing platform based on light emitting diodes (LEDs) is described. The sensor is constructed from a pair of LEDs fused together at an angle where one LED functions as the light source and the other LED is reverse biased to function as a light detector. Sensor function is based on the level of light received by the detector diode, which varies with the reflectance of the interface between the device and its environment, or the chemochromic membrane that covers the device. A simple microprocessor circuit is used to measure the time taken for the photon-induced current to discharge the detector LED from an initial 5 V (logic 1) to 1.7 V (logic zero). This sensing device has been successfully used for colour and colour-based pH measurements and offers extremely high sensitivity, enabling detection down to the sub micro molar level of dyes.     

Europium(III) DOTA-tetraamide complexes as redox-active MRI sensors

PARACEST redox sensors containing the NAD(+)/NADH mimic N-methylquinolinium moiety as a redox-active functional group have been designed and synthesized. The Eu(3+) complex with two quinolinium moieties was nearly completely CEST-silent in the oxidized form but was "turned on" upon reduction with β-NADH. The CEST effect of the Eu(3+) complex containing only one quinolinium group was much less redox-responsive but showed an unexpected sensitivity to pH in the physiologically relevant pH range.     

Iridium(III) complexes as polymer bound oxygen sensors

New luminescent oxygen sensors have been prepared by covalent attachment of iridium complex luminophores to a silicone polymer. The oxygen sensor properties of these novel materials were compared to related sensors in which the luminophore is dispersed within the polymer matrix. Covalently bound luminophore materials showed increased sensitivity to oxygen over dispersions in pure silicone polymer as well as in blends with polystyrene, which was added to improve the mechanical properties of the material.     

Resistive‐type humidity sensors based on PVP–Co and PVP–I2 complexes

Poly(vinylpyrrolidone) films containing cobalt chloride or iodine were investigated to obtain information on their possible use as a humidity sensor element. FTIR and UV‐VIS spectroscopies were used to characterize the PVP–I₂ and PVP–Co complexes. Infrared spectroscopy revealed a structural change of both shape and intensity of the carbonyl and lactam bands, indicating the formation of an ion‐coordination polymer. The J–E curves for pure PVP, PVP–I₂, and PVP–Co films obey ohm's law at low voltages, deviate from the linear response at higher voltages, and finally display breakdown behavior. An increase in current density of the PVP matrix with iodine or cobalt doping is attributed to the formation of charge transfer complexes. The observed hysteresis of the I–V characteristics implies that there was some standing voltage in the film, which could be attributed to a disorientation of polar side groups of PVP. The electrical conductivities of the polymeric complexes were very sensitive to environmental humidity. An explanation of the humidity‐sensing behavior of the PVP–I₂ and PVP–Co complexes is presented. © 2001 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 39: 459–469, 2001     

Highly stable rigid main‐chain nonlinear optical polymers with nematic phase: Effect of liquid‐crystalline phase on nonlinear optical response

Nonlinear optical (NLO) rigid main‐chain polyesters containing azobenzene mesogens with high thermal and temporal stabilities were synthesized from derivatives of hydroxyphenylazobenzoic acid. The NLO properties of the homopolymer, poly[4‐(4‐hydroxy‐3‐methyl phenyl)azo]benzoic acid, and copolymers of 4‐[(4‐hydroxy‐3‐methylphenyl)azo]benzoic acid, 4‐[(4‐hydroxy‐2‐methylphenyl)azo]benzoic acid, and 4‐[(4‐hydroxy‐2‐pentadecyl phenyl)azo]benzoic acid (PSCpHBA) with p‐HBA were measured by the Maker fringe technique. The thermal and liquid‐crystalline (LC) phase behaviors of the polymers were examined by differential scanning calorimetry, a thermal‐stimulated polarization current, and polarized light microscopy. The polymers except PSCpHBA exhibited nematic‐threaded and Schlieren textures. The LC orientations give rise to an enhanced NLO response. The polymers had high thermal and temporal stabilities for second‐harmonic generation activity because of their rigid aromatic backbone. This study suggests that the rigid aromatic main chain exhibiting an LC phase is a promising simple method to synthesize highly stable NLO polymers. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1527–1535, 2003     

Cholesteric liquid crystal displays as optical sensors of barbiturate binding

The influence on the optical properties of cholesteric liquid crystal displays (LCDs) was examined for neutral molecule binding by mesogen/receptors in the mesomorphic phase. The motivation was to prepare neutral molecule sensors that use a colour change to signal analyte binding. A receptor that binds barbiturate analytes was modified with two or one cholesteryl groups to yield compounds 2 and 3, respectively. LCDs were prepared by incorporating one of the receptor/mesogen compounds into a cholesteric LC blend along with a potential H‐bonding guest. The optical properties of the LCDs were then determined by measuring the absorbance of the displays. For various LCDs, the colour of the display depended upon several factors: the amount of guest molecule used, the number of cholesteryl side chains on the receptor and the mole concentration of receptor/mesogen in the blend. In particular, complementary host/guest binding of H‐bonding analytes by the bis(cholesteryl) receptor 2 in a cholesteric LCD caused a change of up to +70 nm, which was observed by the naked eye as a blue‐to‐orange colour change. Control experiments confirm that the colour of an LCD is a consequence of molecular recognition in the mesomorphic phase.     

Cholesteric liquid crystal displays as optical sensors of barbiturate binding

The influence on the optical properties of cholesteric liquid crystal displays (LCDs) was examined for neutral molecule binding by mesogen/receptors in the mesomorphic phase. The motivation was to prepare neutral molecule sensors that use a colour change to signal analyte binding. A receptor that binds barbiturate analytes was modified with two or one cholesteryl groups to yield compounds 2 and 3, respectively. LCDs were prepared by incorporating one of the receptor/mesogen compounds into a cholesteric LC blend along with a potential H-bonding guest. The optical properties of the LCDs were then determined by measuring the absorbance of the displays. For various LCDs, the colour of the display depended upon several factors: the amount of guest molecule used, the number of cholesteryl side chains on the receptor and the mole concentration of receptor/mesogen in the blend. In particular, complementary host/guest binding of H-bonding analytes by the bis(cholesteryl) receptor 2 in a cholesteric LCD caused a change of up to +70 nm, which was observed by the naked eye as a blue-to-orange colour change. Control experiments confirm that the colour of an LCD is a consequence of molecular recognition in the mesomorphic phase.