Radiation grafting of acrylic acid onto polytetrafluoroethylene films for glucose oxidase immobilization and its application in membrane biosensor

Radiation induced grafting of acrylic acid (AA) onto 40 μm polytetrafluoroethylene (PTFE) films was carried out by the direct method of multiple (discrete) and single irradiation form ⁶⁰Co source at different doses up to 100 kGy and room temperature. Depending on the method, the grafting takes place either on the surface layer or within the polymer matrix. The graft copolymers synthesized (PTFE-g-PAA) were transformed into ionomers by treatment with KOH. Both forms were used as carriers for immobilization of enzymes. The copolymers in H- and K-forms were activated by the acylazide method and glucose oxidase (GOD) was immobilized on them. The most suitable proved to be the ionomers PTEE-g-COOK obtained by single irradiation, possessing activity of ca. 120 mU/cm². Enzyme biosensor was designed based on Clark-type electrode and the active membranes prepared, where the membrane plays both the roles of enzyme and oxygen membrane. It can be used for determination of glucose in solutions.     

Radiation induces grafting of styrene onto silicone sealant films

Grafting of styrene onto silicone sealant films was realized in different methanol solutions by gamma radiation, from a ⁶⁰Co source at room temperature. The styrene grafted onto silicone sealant films was synthesized by pre-irradiation oxidative method. Pre-irradiation method was optimized by tuning the γ-irradiation dose, reaction time, temperature, and monomer concentration. The characterization of silicone sealant films were examined by infrared, differential scanning calorimetry, and swelling behavior analysis. The silicone sealant films could be applied to radiation resistance materials or in separation process of low volatile organic compounds from aqueous solution.     

Radiation grafting of dimethylaminoethylmethacrylate onto poly(propylene)

Radiation-induced grafting of dimethylaminoethylmethacrylate onto poly(propylene) films by preirradiation method in presence of air was investigated. The effects of monomer concentration, preirradiation dose and temperature on grafting value as well as the effect of grafting value on crystallinity of the modified polymer were determined.     

Photografting of polymers onto nanosized silica surface initiated by eosin moieties immobilized onto the surface

The photograft polymerization of various vinyl monomers onto nanosized silica surfaces was investigated. It was initiated by eosin moieties introduced onto the silica surface. The preparation of the silica with eosin moieties was achieved by the reaction of eosin with benzyl chloride groups on the silica surface.These were introduced by the reaction of surface silanol groups with 4‐(chloromethyl)phenyltrimethoxysilane in the presence of t‐butyl ammonium bromide as a phase‐transfer catalyst. The photopolymerization of various vinyl monomers, such as styrene, acrylamide, acrylic acid, and acrylonitrile was successfully initiated by eosin moieties on the silica surface in the presence of ascorbic acid as a reducing agent and by oxygen. The corresponding polymers were grafted from the silica surface. The grafting efficiency (percentage of grafted polymer to total polymer formed) in the photoinitiation system was much larger than that in the radical polymerization initiated by surface radicals; these radicals were formed by the thermal decomposition of azo groups introduced onto the silica surface. It was found that the polymer‐grafted silica gave stable dispersions in good solvents of grafted polymer and the wettability of the surfaces can be easily controlled by grafting of polymers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 600–606, 2005     

Organic-inorganic nanocomposites via directly grafting conjugated polymers onto quantum dots

Nanocomposites of poly(3-hexylthiophene)-cadmium selenide (P3HT-CdSe) were synthesized by directly grafting vinyl-terminated P3HT onto [(4-bromophenyl)methyl]dioctylphosphine oxide (DOPO-Br)-functionalized CdSe quantum dot (QD) surfaces via a mild palladium-catalyzed Heck coupling, thereby dispensing with the need for ligand exchange chemistry. The resulting P3HT-CdSe nanocomposites possess a well-defined interface, thus significantly promoting the dispersion of CdSe within the P3HT matrix and facilitating the electronic interaction between these two components. The photophysical properties of nanocomposites were found to differ from the conventional composites in which P3HT and CdSe QDs were physically mixed. Solid-state emission spectra of nanocomposites suggested the charge transfer from P3HT to CdSe QDs, while the energy transfer from 3.5 nm CdSe QD to P3HT was implicated in the P3HT/CdSe composites. A faster decay in lifetime further confirmed the occurrence of charge transfer in P3HT-CdSe nanocomposites.     

Radiation grafting kinetics of HEMADGDA onto silastic in different atmospheres

The radiation grafting kinetics of HEMA, as well as that of the mixture monomers of HEMA and DGDA have been researched. The effects of radiation dose, dose rate, and temperature on grafting are systematically researched in different atmospheres. It has been found that grafting is different in different atmospheres. The findings show that the depth distribution of HEMA/ DGDA monomer units in grafting layer is nonuniform. At first, HEMA grafting is superior, in the later stage of grafting, however, DGDA grafting is increased. The temperature effect on grafting is great at the beginning, it is less in the later stage of grafting.     

Radiation induced grafting of acrylic acid onto extruded polystyrene surface

Polystyrene materials with good solubility in liquid scintillation cocktails are used to wipe off different types of surfaces in order to determine the tritium removable contamination with the help of a liquid scintillation counter. This paper analyses hydrophilic surface modifications by radiation induced grafting of acrylic groups onto extruded polystyrene plates. Two grafting methods were used: (a) exposure of extruded polystyrene plates, immersed in aqueous acrylic acid solution, to a gamma radiation of a Co-60 source, and (b) exposure of extruded polystyrene plates to a Co-60 source, followed by the immersion of extruded polystyrene plates in aqueous acrylic acid solution. The grafting of acrylic was proved by IR spectrometry and by radiometric methods using acrylic acid labelled with tritium.     

Surface modification of polymers. IV. UV initiated degradation of polymers with stabilizers grafted onto the surface

Polypropylene (PP), Polyethylene (PE), and polystyrene (PS) films were grafted with glycidylmethacrylate in thin surface layers. To the oxiran groups thus grafted onto the surface three UV stabilizers were attached, 4-amino-2,2,6,6-tetramethylpiperidine (AP), 2,4-dihydroxybenzophenone (DHBP), and phenyl 4-aminosalicylate (PAS). The amount of stabilizer grafted onto the surface varied between 25 and 40 nmol/cm² depending on the polymer substrate. The samples were exposed to UV radiation in air, and the degradation and oxidation of the polymers were studied with IR, UV, and ESCA spectroscopy and by stress–strain measurements. PP grafted with AP exhibited a near 20-fold increase in lifetime compared with the unprotected PP, AP did not stabilize the PE or PS samples. DHBP was an efficient stabilizer of PE, the oxidation rate of the grafted sample being 1/2 to 1/3 of the ungrafted. A similar effect was observed when DHBP was grafted onto PP and PS. PAS underwent a rearrangement reaction when irradiated with UV light, and had only a slight stabilizing effect.     

Surface grafting of polymers onto inorganic ultrafine particles: Reaction of functional polymers with acid anhydride groups introduced onto inorganic ultrafine particles

The surface grafting onto inorganic ultrafine particles, such as silica, titanium oxide, and ferrite, by the reaction of acid anhydride groups on the surfaces with functional polymers having hydroxyl and amino groups was examined. The introduction of acid anhydride groups onto inorganic ultrafine particle was achieved by the reaction of hydroxyl groups on these surfaces with 4-trimethoxysilyltetrahydrophthalic anhydride in toluene. The amount of acid anhydride groups introduced onto the surface of ultrafine silica, titanium oxide, and ferrite was determined to be 0.96, 0.47, and 0.31 mmol/g, respectively, by elemental analysis. Functional polymers having terminal hydroxyl or amino groups, such as diol-type poly(propylene glycol) (PPG), and diamine-type polydimethylsiloxane (SDA), reacted with acid anhydride groups on these ultrafine particles to give polymer-grafted ultrafine particles: PPG and SDA were considered to be grafted onto these surfaces with ester and amide bond, respectively. The percentage of grafting increased with increasing acid anhydride group content of the surface: the percentage of grafting of SDA (M_n = 3.9 × 10³) onto silica, titanium oxide, and ferrite reaching 64.7, 33.7, and 24.1%, respectively. These polymer-grafted ultrafine particles gave a stable colloidal dispersion in organic solvents.     

Grafting onto wool. II. BPO-initiated grafting of polystyrene

Grafting of polystyrene (PS) onto wool has been carried out in aqueous medium by use of benzoyl peroxide (BPO) as initiator in the presence of an acetic acid–pyridine mixture which acted as a pH modifier. Percent grafting was found to be dependent on concentration of acetic acid and pyridine, concentration of monomer, concentration of BPO, and reaction temperature. The role of pH modifier upon BPO-initiated grafting is established by the observation that no grafting occurred when one of the components of the pH modifier was absent.     

Photografting of vinyl polymers onto ultrafine inorganic particles: Photopolymerization of vinyl monomers initiated by AZO groups introduced onto these surfaces

The photografting of polymers onto ultrafine inorganic particles, such as silica and titanium oxide, initiated by azo groups introduced onto these surfaces was investigated. The introduction of azo groups onto the particles was achieved by the reaction of 4,4′-azobis(4-cyanopentanoic acid) with surface isocyanate groups, which were introduced by the treatment with tolylene 2,4-diisocyanate. It was found that the photopolymerization of vinyl monomers, such as methyl methacrylate (MMA), styrene, and N-vinylcarbazole, is initiated by ultrafine particles having azo groups. The corresponding polymers were effectively grafted onto these surfaces through the propagation of the polymer from the surface radicals formed by the photodecomposition of the azo groups: e.g., the percentage of grafting of PMMA and polystyrene onto silica was reached to 112 and 176%, respectively. The percentage of grafting onto silica in the graft polymerization initiated by photodecomposition of surface azo groups was much larger than that initiated by thermal decomposition. Polymer-grafted ultrafine particles thus obtained gave a stable colloidal dispersion in good solvents for the grafted chain. © 1994 John Wiley & Sons, Inc.     

Radiation grafting of NIPAAm and acryloxysuccinimide onto PP films and sequent crosslinking with polylysine

N-isopropylacrylamide (NIPAAm) and N-acryloxysuccinimide (NAS) were grafted from their binary mixtures in tetrahydrofurane (THF) and toluene solutions onto polypropylene (PP) films by the pre-irradiation oxidative method in air. Effects of pre-irradiation dose, dose rate, and monomer concentrations (NAS/NIPAAm) were studied. The grafted copolymers exhibited the lower critical solution temperature (LCST) at around 31 °C. Based on its thermo-reversible behavior, this system has been used for immunoassay, drug delivery, separation processes and immobilization of enzymes. N-acryloxysuccinimide (NAS) has been used as an active ester to bind proteins through amide bond formation with lysine, and because of this property, the grafted copolymer has been crosslinked with polylysine. Techniques used to characterize the films included differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), infrared (FTIR-ATR) and elemental analysis. Results on thermo-sensitivity are presented. This new system could find applications in vesicle immobilizations.     

Radiation grafting of glycidyl methacrylate onto cotton gauzes for functionalization with cyclodextrins and elution of antimicrobial agents

The aim of this work was to functionalize cotton gauzes with cyclodextrins in order to endow them with the ability to elute antimicrobial agents and to prevent infections. Gauzes were modified according to a two-steps approach: (1) pre-irradiation of the gauzes (Gammabeam) to graft glycidyl methacrylate (GMA), and (2) covalent binding of cyclodextrins (CDs) to the GMA-grafted gauzes. First the dependence of GMA grafting yield on the radiation dose (from 1 to 20 kGy) and the time of reaction was evaluated in detail. Anchorage of β-cyclodextrin (β-CD) and hydroxypropyl-β-cyclodextrin (HP-β-CD) was confirmed by FTIR, TGA, and 3-methylbenzoic acid sorption. Differently from pristine gauzes, CD-functionalized GMA-grafted gauzes were able to load an anionic antibiotic drug, specifically nalidixic acid, and to sustain the release for 6 h. Drug-loaded gauzes were tested in vitro against E. coli and the results prove the suitability of the functionalization approach to efficiently inhibit the growth of this microorganism.     

Radiation-induced graft polymerization of acrylic acid onto fluorinated polymers. II. Graft copolymer–metal complexes obtained by radiation grafting onto poly(tetrafluoroethylene-ethylene) copolymer

A study has been made on the graft copolymers obtained by radiation-induced grafting of acrylic acid onto poly(tetrafluoroethylene-ethylene) (ET) films. The conversion of the graft copolymer into metal acrylate copolymer complex was carried out by treatment with different metal salts. Such a prepared graft copolymer–metal complex was confirmed by different methods: IR, UV spectrometry, degree of coloration, and x-ray fluorescence. Some selected properties of the graft copolymer–metal complexes such as electrical conductivity, swelling behavior, and mechanical properties were investigated. The influence of metal complexes in the graft copolymers was determined and compared with the grafted films. The possibility of the practical uses for such prepared graft copolymer–metal complexes was discussed and determined. It was assumed that such materials may be of great interest in the field of semiconducting materials in addition to their applicability as cation-exchange membranes. © 1993 John Wiley & Sons, Inc.     

Selective sample preparation for the analysis of (fluoro)quinolones in baby food: molecularly imprinted polymers versus anion-exchange resins

In this work, an analytical method for simultaneous analysis of several quinolones (cinoxacin, oxolinic acid, nalidixic acid, and flumequine) and fluoroquinolones (norfloxacin, enrofloxacin, enoxacin, ciprofloxacin, and danofloxacin) in baby-food samples is described for the first time. The method is based on isolation of these analytes by ultrasound-assisted extraction procedure followed by a solid-phase extraction sample clean-up step and final determination of the analytes by HPLC using UV detection. For the extraction step, 2 g baby food was mixed with methanol in a centrifuge tube and one single extraction cycle of 15 min at room temperature was carried out. After centrifugation, supernatant was collected and two different solid-phase extraction procedures were developed and evaluated for sample clean-up. The first was based on use of strong anion-exchange cartridges whereas the second was based on use of a ciprofloxacin-imprinted polymer. Both sample clean-up procedures had their own advantages and drawbacks, and the analytical performance and applicability of each procedure was established and properly discussed. The anion-exchange resin-based method enabled simultaneous determination of quinolones and fluoroquinolones, reaching limits of detection ranging from 0.03 to 0.11 μg g⁻¹. In contrast, the use of a ciprofloxacin-imprinted polymer did provide selectivity towards fluoroquinolones, leading to chromatograms free from co-extractives reaching limits of detection one order of magnitude lower than those obtained by the first approach.     

Radiation effects on polymers—XI. Radiation grafting of acrylamide on to cellulose acetate reverse osmosis membranes

With the aim of improving properties of cellulose acetate membranes for reverse osmosis desalination, grafting was performed using high energy electrons. In this paper, the grafting parameters (radiation dose and method, monomer concentration, solvents, chain transfer agent and redox system) are considered; conclusions are drawn as to the grafting content and mode of grafting.     

Chemically initiated graft copolymerization of acrylic acid onto acrylonitrile-butadiene-styrene (ABS) terpolymer and its constituent polymers

The graft copolymerization of acrylic acid onto acrylonitrile-butadiene-styrene terpolymer (ABS), has been initiated by the use of both benzoyl peroxide and azobisisobutyronitrile. Addition occurs in the butadiene region of the polymer, either by the loss of a vinylic hydrogen and subsequent radical formation and addition of monomer or by addition to the double bond. The amount of acrylic acid which may be added is dependent upon the time and temperature of the reaction and the concentration of monomer and initiator. Thermal analysis of the grafted samples show that the residue is less than that expected based upon the composition of the copolymer; similar results have been previously obtained for acrylic acid grafted by another technique. © 1996 John Wiley & Sons, Inc.     

Radiation grafting of styrene onto polypropylene fibres by a 10 MeV electron beam

The radiation-induced graft copolymerization is an effective method for modification of the chemical and physical properties of polypropylene. Graft copolymerization of styrene onto polypropylene fibers has been studied by simultaneous irradiation method, using a 10 MeV electron beam. Samples were irradiated in an environment of nitrogen gas. The effects of radiation dose and styrene concentration in methanol, on the grafting yield were investigated. The effects of polyfunctional monomer, i.e., trimethylopropane trimethacrylate (TMPTMA) and acid (sulfuric acid) on the grafting yield were also examined. The grafted samples were then sulfonated and allowed to react with solution of a basic dye. The samples were characterized by mechanical properties and thermal stability. The mechanical properties of the radiated samples were reduced and the grafted samples had lower mechanical properties.     

Radiation induced graft polymerization of multi-walled carbon nanotubes for superhydrophobic composite membrane preparation

Highly soluble multi-walled carbon nanotubes (MWNTs) were prepared by radiation-induced free radical graft polymerization of vinyl acetate (VAc) onto pristine MWNT surfaces. High resolution transmission electron microscopy (HR-TEM), Fourier transform infrared (FTIR) spectroscopy, and micro-Raman spectroscopy were used to confirm that poly(vinyl acetate) (PVAc) had been successfully grafted onto the surface of the MWNTs. The effects of experimental parameters on the degree of grafting (DG) of PVAc were also investigated, including adsorbed dose, dose rate, initial monomer concentration, and solvents. The grafted MWNTs (MWNTs-g-PVAc) exhibited good solubility in common organic solvents at high mass fraction. In addition, a superhydrophobic composite membrane could be readily fabricated by vacuum filtration of MWNTs-g-PVAc onto a supporting membrane, as was confirmed by water contact angle testing and visualization by scanning electron microscopy.