Effect of catalyst mass on CVD synthesis of carbon nanotubes

Method for obtaining carbon nanotubes by chemical vapor deposition on metal oxide catalysts produced by the reaction of transition metal nitrates with glycine was considered. The process of synthesis of carbon nanotubes was experimentally studied at various reaction durations, temperatures, and amounts of a catalyst. It was found that the ash content of the product and the content of impurities depend on the amount of a catalyst. A reactor design raising the output capacity of the process for synthesis of carbon nanotubes is suggested.     

Complementary effects of multiwalled carbon nanotubes and conductive carbon black on polyamide 6

This article introduces a newly innovative idea for preparation of superconductive ternary polymeric composites of polyamide 6 (PA6), conductive carbon black (CCB), and multiwalled carbon nanotubes (MWCNTs) with different weight ratios by a melt‐mixing technique. The complementary effects of CCB and MWCNTs at different compositions on rheological, physical, morphological, thermal, and dynamic mechanical and electrical properties of the ternary composites have been examined systematically. We have used a novel formulation to produce high‐weight fraction ternary polymer composites that show extremely higher conductivity when compared with their corresponding binary polymer composites at the same carbon loading. For example, with an addition of 10 wt % MWCNTs into the CCB/PA6 composite preloaded with 10 wt % CCB, the electrical conductivity of these ternary composites was about 5 S/m, which was 10 times that of the CCB/PA6 binary composite (0.5 S/m) and 125 times that of the MWCNT/PA6 binary composite (0.04 S/m) at 20 wt % carbon loading. The incorporation of the MWCNTs effectively enhanced the thermal stability and crystallization of the PA6 matrix in the CCB/PA6 composites through heterogeneous nucleation. The MWCNTs appeared to significantly affect the mechanical and rheological properties of the PA6 in the CCB/PA6 composites, a way notably dependent on the MWCNT contents. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1203–1212, 2010     

CVD synthesis of spiral carbon nanotubes over asymmetric catalytic particles

The influence of asymmetric catalytic particles prepared by various methods was investigated on the growth of spiral carbon nanotubes using the CVD method. Asymmetric particles were prepared by either milling or crystallization from oversaturated solution onto the surface of catalyst support or catalyst impregnation at pH 8–9. As-prepared catalysts were tested in the decomposition of acetylene. Carbon deposit, thus carbon nanotubes and spirals were observed by transmission electron microscopy the activity was characterized by carbon yield.     

Electro-oxidation of amino-functionalized multiwalled carbon nanotubes

We report the electrochemistry of amino-functionalized multiwalled carbon nanotubes (MWCNTs-NH₂) in the pH range from 0.3 to 6.4 using quantitative cyclic voltammetry (CV) and single entity electrochemistry measurements, making comparison with non-functionalized MWCNTs. CV showed the latter to both catalyze the solvent (water) decomposition and to undergo irreversible electro-oxidation forming oxygen containing surface functionality. The MWCNTs-NH₂ additionally undergo an irreversible oxidation to an extent which is dependent on the pH of the solution, reflecting the variable amount of deprotonated amino groups present as a function of pH. Nano-impact experiments conducted at the single particle level confirmed the oxidation of both types of MWCNTs, showing agreement with the CV. The pK_a of the amino groups in MWCNTs was determined via both electrochemical methods giving consistent values of ca. 2.5.

A new and generic approach to the study of the oxidation of different forms of CNTs is found by using quantitative single entity and ensemble electrochemistry measurements.     

Enzymatic degradation of multiwalled carbon nanotubes

Because of their unique properties, carbon nanotubes and, in particular, multiwalled carbon nanotubes (MWNTs) have been used for the development of advanced composite and catalyst materials. Despite their growing commercial applications and increased production, the potential environmental and toxicological impacts of MWNTs are not fully understood; however, many reports suggest that they may be toxic. Therefore, a need exists to develop protocols for effective and safe degradation of MWNTs. In this article, we investigated the effect of chemical functionalization of MWNTs on their enzymatic degradation with horseradish peroxidase (HRP) and hydrogen peroxide (H(2)O(2)). We investigated HRP/H(2)O(2) degradation of purified, oxidized, and nitrogen-doped MWNTs and proposed a layer-by-layer degradation mechanism of nanotubes facilitated by side wall defects. These results provide a better understanding of the interaction between HRP and carbon nanotubes and suggest an eco-friendly way of mitigating the environmental impact of nanotubes.     

Sonochemical oxidation of multiwalled carbon nanotubes

Functionalization of carbon nanotubes (CNTs) is important for enhancing deposition of metal nanoparticles in the fabrication of supported catalysts. A facile approach for oxidizing CNTs is presented using a sonochemical method to promote the density of surface functional groups. This was successfully employed in a previous study [J. Phys. Chem. B 2004, 108, 19255] to prepare highly dispersed, high-loading Pt nanoparticles on CNTs as fuel cell catalysts. X-ray photoelectron spectroscopy (XPS), transmission electron microscopy, cyclic voltammetry, and settling speeds were used to characterize the degree of surface functionalization and coverage. The sonochemical method effectively functionalized the CNTs. A mixture of -C-O-/-C=O and -COO- was observed along with evidence for weakly bound CO at longer treatment times. The integrated XPS C 1s core level peak area ratios of the oxidized-to-graphitic C oxidation states, as well as the atom % oxygen from the O 1s level, showed an increase in peak intensity (attributed to -CO(x)()) with increased sonication times from 1 to 8 h; the increase in C surface oxidation correlated well with the measured atom %. Most of the CNT surface oxidation occurred between 1 and 2 h. The sonochemically treated CNTs were also studied by cyclic voltammetry and settling experiments, and the results were consistent with the XPS observations.     

Thermogravimetric analysis of single-walled carbon nanotubes synthesized by induction thermal plasma

A standard procedure for thermogravimetric analysis (TG) of carbonaceous materials including single-walled carbon nanotubes was developed based on a statistical design to precisely study the effect of three main TG parameters: temperature ramp (TR, °C), initial mass (IM) of the sample (mg), and the rate of flowing gas (sccm) on the TG results. In addition, the effect of sampling including sample morphology and moisture content on TG were studied. The results of statistical design clearly showed that TG was affected by these three parameters and particularly by IM and TR. Interestingly, it was observed that the TG results are affected insufficiently by the sample morphology and low moisture content. This study also confirmed the potential of TG combined with high-resolution scanning electron microscopy to be a simple and straightforward method for purity evaluation of SWCNT-containing samples with a complex TG behavior such as those of induction thermal plasma grown. A complementary study on nano-metric catalysts indicated that these types of materials enable to gain or loss mass in an oxidative ambient during TG. A mass loss of 6% and a mass gain of 23% were observed for pure nano-metric yttrium oxide and nickel, respectively. A simple calculation showed a total mass gain of 1?wt% particularly by the catalysts in the SWCNT sample during TG.     

Tunable thermoresponsive water-dispersed multiwalled carbon nanotubes

Polymers containing poly(ethylene glycol) methacrylate and 2-(2-methoxyethoxy)ethyl methacrylate have been synthesized by Cu(0)-mediated radical polymerisation for use as thermoresponsive water-dispersants for carbon nanotubes.     

Polyurea-functionalized multiwalled carbon nanotubes: synthesis, morphology, and Raman spectroscopy

An in situ polycondensation approach was applied to functionalize multiwalled carbon nanotubes (MWNTs), resulting in various linear or hyperbranched polycondensed polymers [e.g., polyureas, polyurethanes, and poly(urea-urethane)-bonded carbon nanotubes]. The quantity of the grafted polymer can be easily controlled by the feed ratio of monomers. As a typical example, the polyurea-functionalized MWNTs were measured and characterized in detail. The oxidized MWNTs (MWNT-COOH) were converted into acyl chloride-functionalized MWNTs (MWNT-COCl) by reaction with neat thionyl chloride (SOCl2). MWNT-COCl was reacted with excess 1,6-diaminohexane, affording amino-functionalized MWNTs (MWNT-NH2). In the presence of MWNT-NH2, the polyurea was covalently coated onto the surfaces of the nanotube by in situ polycondensation of diisocyanate [e.g., 4,4'-methylenebis(phenylisocyanate)] and 1,6-diaminohexane, followed by the removal of free polymer via repeated filtering and solvent washing. The coated polyurea content can be controlled to some extent by adjusting the feed ratio of the isocyanato and amino groups. The structure and morphology of the resulting nanocomposites were characterized by FTIR, NMR, Raman, confocal Raman, TEM, EDS, and SEM measurements. The polyurea-coated MWNTs showed interesting self-assembled flat- or flowerlike morphologies in the solid state. The signals corresponding to that of the D and G bands of the carbon nanotubes were strongly attenuated after polyurea was chemically tethered to the MWNT surfaces. Comparative experiments showed that the grafted polymer species and structures have a strong effect on the Raman signals of polymer-functionalized MWNTs.     

CVD synthesis of nitrogen doped carbon nanotubes using ferrocene/aniline mixtures

Nitrogen doped carbon nanotubes (N-CNTs) have been synthesized by the chemical vapour deposition (CVD) floating catalyst method using either 4-ferrocenylaniline or mixtures of varying concentrations of ferrocene/aniline together with toluene as added carbon source. The N-CNTs produced are less stable (thermal gravimetric analysis measurements), less graphitic and more disordered (transmission electron microscope measurements) than their undoped counterparts. The ratio of the Raman D- and G-band intensities increase with the nitrogen concentration used during the CNT growth. Furthermore, the transmission electron microscope (TEM) studies reveal that the CNTs are multi-walled (MW), and that the diameters of the N-MWCNTs can be controlled by systematically varying the concentrations of the nitrogen source. The TEM analysis also revealed that when ferrocenylaniline and ferrocene/aniline reactions are compared at similar Fe/N ratios, higher N doping levels are achieved (ca. 2-5×) when ferrocenylaniline is the catalyst.     

Synthetic gecko foot-hairs from multiwalled carbon nanotubes

We report a fabrication process for constructing polymer surfaces with multiwalled carbon nanotube hairs, with strong nanometer-level adhesion forces that are 200 times higher than those observed for gecko foot-hairs.     

In situ quantum dot growth on multiwalled carbon nanotubes

The generation of nanoscale interconnects and supramolecular, hierarchical assemblies enables the development of a number of novel nanoscale applications. A rational approach toward engineering a robust system is through chemical recognition. Here, we show the in situ mineralization of crystalline CdTe quantum dots on the surfaces of oxidized multiwalled carbon nanotubes (MWNTs). We coordinate metallic precursors of quantum dots directly onto nanotubes and then proceed with in situ growth. The resulting network of molecular-scale "fused" nanotube-nanocrystal heterojunctions demonstrates a controlled synthetic route to the synthesis of complex nanoscale heterostructures. Extensive characterization of these heterostructures has been performed using scanning electron microscopy (SEM), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), energy-dispersive X-ray spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, UV-visible spectroscopy, and X-ray diffraction (XRD).     

Enrichment of peptides from plasma for peptidome analysis using multiwalled carbon nanotubes

Human plasma contains a complex matrix of proteolytically derived peptides (plasma peptidome) that may provide a correlate of biological events occurring in the entire organism. Analyzing these peptides from a small amount of serum/ plasma is difficult due to the complexity of the sample and the low levels of these peptides. Here, we describe a novel peptidome analysis approach using multiwalled carbon nanotubes (MWCNTs) as an alternative adsorbent to capture endogenous peptides from human plasma. Harvested peptides were analyzed by using liquid chromatography-mass spectrometry as a means of detecting and assessing the adsorbed molecules. The improved sensitivity and resolution obtained by using liquid chromatography-mass spectrometry allowed detection of 2521 peptide features (m/z 300-1800 range) in about 50 microL of plasma. 374 unique peptides were identified with high confidence by two-dimensional liquid chromatography system coupled to a nano-spray ionization linear ion trap-mass spectrometer. High recovery of BSA digest peptides enriched with MWCNTs, in both standard buffer and high abundance protein solution, was observed. Comparative studies showed that MWCNTs were superior to C18 and C8 for the capture of the smaller peptides. This approach could hold promise of routine plasma peptidome analysis.     

Electroactive films of heme protein-coated multiwalled carbon nanotubes

A novel method for fabricating protein-MWNT films on pyrolytic graphite (PG) electrodes was described. Positively charged hemoglobin (Hb) or myoglobin (Mb) in buffers at pH 5.5 or 5.0 was first adsorbed on the surface of acid-pretreated, negatively charged multiwalled carbon nanotubes (MWNTs) mainly by electrostatic interaction, forming a core-shell structure. The aqueous dispersion of protein-coated MWNTs was then cast on PG electrodes, forming protein-MWNT films after evaporation of solvent. The protein-MWNT films exhibited a pair of well-defined, quasi-reversible cyclic voltammetric peaks, characteristic of heme Fe(III)/Fe(II) redox couples. The protein films were characterized by voltammetry, UV-vis spectroscopy, and scanning electron microscopy (SEM). This approach for assembly of protein-MWNT films showed higher surface concentration of electroactive proteins than the simple cast method, and the amount of proteins in the films could be controlled more precisely compared with the dipping method. Furthermore, the film assembly using this method was more stable than that using simple cast method. The proteins in MWNT films retained their near-native structure, and electrochemically catalyzed reduction of oxygen and hydrogen peroxide, suggesting the potential applicability of the films as the new type of biosensors or bioreactors based on direct electrochemistry of enzymes.     

Microwave-assisted covalent sidewall functionalization of multiwalled carbon nanotubes

Thermal cycloaddition of 1,3-dipolar azomethine ylides to the sidewalls of multiwalled carbon nanotubes (MWNTs) has been used to prepare MWNTs that contain 2-methylenethiol-4-(4-octadecyloxyphenyl) (4), N-octyl-2-(4-octadecyloxyphenyl) (5) or 2-(4-octadecyloxyphenyl)pyrrolidine (6) units. All these contain the 4-octadecyloxyphenyl substituent that acts as a solubilizing group. Microwave (MiW)-assisted heating was found to be highly efficient for soluble MWNTs, for which the amount of added groups after only 2 h of MiW heating at 200 degrees C, determined by using thermogravimetric analysis, was found to be in the same range as that obtained after 100-120 h of conventional heating of soluble and insoluble MWNTs. Solubility is a key feature for a successful MiW-heated reaction; MWNTs insoluble in the reaction medium yielded considerably less addends in the MiW-heated reactions than in the conventionally heated reaction. The location and even distribution of the pyrrolidine units over the outermost layer of the MWNTs was verified by transmission electron microscopy analysis of 4 that had been treated with gold nanoparticles and thoroughly washed to remove gold particles adsorbed on nonfunctionalized parts of the MWNTs.     

Determination of catecolamines on electrodes modified with multiwalled carbon nanotubes

The electrochemical behavior of several biologically active catecolamines in studied on a glassy carbon electrode with the surface preliminarily modified by a composite film containing preliminarily carboxylated multi-walled carbon nanotubes (MWNT). The coatings are characterized by the methods of cyclic voltammetry and scanning microscopy. It is shown that the use of hybrid composites prepared by immobilizing MWNT and gold nanoparticles into the film of poly(isonicotinic) acid provides the high diffusion permeability of the surface layers and the efficiency of the electron transfer as regards catecolamines. The possibility of using these electrodes for selective determination of these substances in drugs widely used in the modern practical medicine is demonstrated.     

The growth of uncoated gold nanoparticles on multiwalled carbon nanotubes

The growth of uncoated gold nanoparticles on the surface of multiwalled carbon nanotubes (MWCNTs) through the UV irradiation method was investigated. TEM observations showed that the size and the growth behavior of nanoparticles were primarily affected by the diameter of MWCNTs and solution pH values. The possible mechanisms were also discussed.