Performance of a 3 mm×3 mm silicon photomultiplier for use on the X-ray calibration system of the SVOM gamma ray monitor

The calibration detector of a gamma ray monitor (GRM) is designed to detect alpha particles from ²⁴¹Am and to send out the coincidence signal to the GRM X-ray detector. The silicon photomultiplier (SiPM), as a novel photon device, is a good candidate to convert alpha-exciting fluorescent photons into electric signals. Three types of SiPMs from SSPM and MPPC, each having an active area of 3 mm×3 mm, were compared in the matter of the spectra from low-intensity light, dark count, crosstalk probability and I-V curve. The temperature coe cient of SSPM-0710G9MM was also characterized. The application of a SiPM on the GRM has been proved to be feasible.     

Time calibration for the end cap TOF system of BESⅢ

The time calibration for end cap TOF system of BESⅢ is studied in this paper. It has achieved about 110 ps time resolution for muons in dimu events. The pulse height correction using electronic scan curve and the predicted time calculated using Kalman filter method are introduced. This paper also describes the study of using electrons and muons as calibration samples.     

Characterization of the BaBiO3-doped BaTiO3 positive temperature coefficient of a resistivity ceramic using impedance spectroscopy with Tc=155℃

BaBiO 3-doped BaTiO3(BB-BT) ceramic,as a candidate for lead-free positive temperature coefficient of resistivity (PTCR) materials with a higher Curie temperature,has been synthesized in air by a conventional sintering technique. The temperature dependence of resistivity shows that the phase transition of the PTC thermistor ceramic occurs at the Curie temperature,Tc=155℃,which is higher than that of BaTiO3(≤130℃). Analysis of ac impedance data using complex impedance spectroscopy gives the alternate current (AC) resistance of the PTCR ceramic. By additional use of the complex electric modulus formalism to analyse the same data,the inhomogeneous nature of the ceramic may be unveiled. The impedance spectra reveal that the grain resistance of the BB-BT sample is slightly influenced by the increase of temperature,indicating that the increase in overall resistivity is entirely due to a grain-boundary effect. Based on the dependence of the extent to which the peaks of the imaginary part of electric modulus and impedance are matched on frequency,the conduction mechanism is also discussed for a BB-BT ceramic system.