Torsional stability of a glass-reinforced plastic cylindrical shell with an elastic core

The problem of the stability of a glass-reinforced plastic cylindrical shell with an elastic core subjected to twisting moments applied to the edges of the shell is considered. As in various other studies [4–6], the glass-reinforced plastic is treated as an elastically orthotropic material. The core is treated as an isotropic elastic cylinder, whose outer surface is bonded to the shell. Expressions for the critical stresses are obtained for an infinitely long shell and a shell of finite length.Moscow. Translated from Mekhanika Polimerov, No. 6, pp. 1082–1086, November–December, 1970.     

Effect of transverse shear on the stability of an orthotropic cylindrical shell with an elastic core in axial compression

The effect of transverse shear on the stability of a composite shell in axial compression has been investigated. The core is treated as an isotropic elastic cylinder bonded to the inner surface of the shell. The effect of the tangential shearing forces between the shell and the core is taken into account.Institute of Polymer Mechanics, Academy of Sciences of the Latvian SSR, Riga. Translated from Mekhanika Polimerov, No. 2, pp. 267–273, March–April, 1973.     

Optimization of a cylindrical composite shell with a viscoelastic core in axial compression

The problem of the optimal design of a composite shell in creep is formulated. The progressive buckling of a cross-wound reinforced cylindrical shell supported on a viscoelastic core is considered as a particular case. The reinforcement structure and shell thickness corresponding to minimum weight for a given load and service life are found.Institute of Polymer Mechanics, Academy of Sciences of the Latvian SSR, Riga. Translated from Mekhanika Polimerov, No. 3, pp. 442–446, May–June, 1975.     

Research in the flexural buckling modes of a cylindrical sandwich shell under the action of a temperature field inhomogeneous across its thickness

A solution to the problem on the stability according to the flexural buckling mode is given for a cylindrical sandwich shell with a transversely soft core of arbitrary thickness. The shell is under the action of a temperature field inhomogeneous across the thickness, and its end faces are fastened in such a way (in the axial direction, the face sections of the external layer are fixed, but of the internal one are free) that an inhomogeneous subcritical stress-strain state arises in the shell across the thickness of its layers. It is shown that, under such conditions, the buckling mode of the shell is mixed flexural. To reveal and investigate this mode, equations of subcritical equilibrium and stability of a corresponding degree of accuracy are needed.Translated from Mekhanika Kompozitnykh Materialov, Vol. 40, No. 6, pp. 715–730, November–December, 2004.     

Refined stability theory for sandwich shells with transversally stiff core. 1. Nonlinear equilibrium equations

A refined version of geometrically nonlinear relationships is proposed for the static thermoelastic response of sandwich shells with face sheets made of composite or homogeneous materials and a transversally stiff core. This theory has primary importance for studying mixed forms of buckling of the bearing sheets, which are mainly realized in the zones of a momentary stress-deformed state of the shell on the whole. An iteration procedure was developed for construction of the model. In the first step, assuming that the core is transversally soft, expressions are derived for the components of the displacement vector after integration of the three-dimensional equilibrium equations. In the second step, the tangential stresses are determined assuming a transversally stiff core to obtain the in-plane stresses and highly accurate transverse normal stresses. The proposed model admits a formal changeover to the model of a shell with a transversely soft core.Center for the Study of Dynamics and Stability. A. N. Tupolev Kazan State Technical University, Kazan, Tatarstan, Russia. Translated from Mekhanika Kompozitnykh Materialov, Vol. 32, No. 4, pp. 513–524, July–August, 1996.     

Local stability of an orthotropic cylindrical shell partially filled by an elastic core and subjected to external pressure

The local stability of an infinitely long orthotropic cylindrical shell partially filled by an elastic thick-walled cylindrical core and subjected to external pressure is investigated.Scientific-Research Institute of Chemical Technology, Moscow Region. Translated from Mekhanika Polimerov, No. 3, pp. 538–542, May–June, 1971.     

Stability of a transversely isotropic spherical shell coupled with an elastic foundation

The stability "in the small" of a flat spherical shell with elastic reinforcement is investigated. It is assumed that the shell is made of material (glass-reinforced plastic) with low shear resistance [7, 8], which determines the choice of calculation procedure: generalized applied shell theories of the Timoshenko and Ambartsumyan types [1, 3]. The results obtained are compared with the corresponding results of the Kirchhoff-Love theory.L'vov Polytechnic Institute. Translated from Mekhanika Polimerov, No. 1, pp. 129–131, January–February, 1970.     

Concerning the critical load for an orthotropic cylindrical shell with a viscoelastic core

The problem of determining the critical load for a cylindrical shell with a viscoelastic core is considered. An expression for the critical load under quasistationary loading is obtained on the basis of a generalization of the Winkler hypothesis.Institute of Polymer Mechanics, Academy of Sciences of the Latvian SSR, Riga. Translated from Mekhanika Polimerov, No. 6, pp. 1049–1053, November–December, 1973.     

Ductility of nonmetallic hybrid fiber composite reinforcement for concrete

Reinforcing units, FRP, of unidirectional fiber composites for concrete have elastic behavior up to tensile failure. For safety reasons an elongation of 3% at maximum load is usually required for the reinforcement. Ductile behavior with the necessary elongation and stress hardening could be obtained with braided fiber strands around a core of foam plastic, thin glass fiber cylindrical shell, or unidirectional carbon fibers. Braids around a porous core reveal the ductility when epoxy resin breaks up and collapse of core enables the braids to rotate. The same seems to happen at that cross section, where carbon fiber core breaks in tension. The best result is obtained using a cylindrical glass fiber reinforced core shell surrounded with aramid fiber braid.Presented at the Ninth International Conference on the Mechanics of Composite Materials, Riga, October, 1995.Division of Building Materials, Chalmers University of Technology, S412 96 Göteborg, Sweden. Institute of Polymer Mechanics, Latvian Academy of Sciences, Riga, LV-1006 Latvia. Published in Mekhanika Kompozitnykh Materialov, Vol. 32, No. 2, pp. 167–179, March–April, 1996.     

Torsion of laminated cylindrical shells with adhesive interlayers

Based on refined equations of the Timoshenko-type shell theory, the contact stresses in torsion of a two-layer cylindrical shell with an adhesive interlayer are numerically studied. The effect of the geometric and physical-mechanical parameters of the load-carrying layers and adhesive interlayer of the shell on the distribution of the interlaminar tangential stress is analyzed. The results are presented graphically.Presented at the 10th International Conference on the Mechanics of Composite Materials (Riga, April 20–23, 1998).Pidstryhach Institute of Applied Problems of Mechanics and Mathematics, National Academy of Sciences of Ukraine, Lviv, Ukraine. Translated from Mekhanika Kompozitnykh Materialov, Vol. 34, No. 4, pp. 501–506, July–August, 1998.     

Shear buckling modes of cylindrical sandwich shells under external pressure, tension-compression of bearing layers with unequal forces, and inhomogeneous across-the-thickness temperature

Equations are set up for describing, in a correct statement and with an accuracy sufficient in actual practice, the shear buckling modes (BMs) of cylindrical sandwich shells with a transversely soft core of arbitrary thickness. Based on them, solutions are obtained to a number of problems on the buckling instability according to shear modes under some force and thermal loadings. It is found that the BMs occur in the shell along the circumferential and axial directions if, in the precritical state, a normal compressive stress arises in the transverse direction. It is shown that this condition is fulfilled in the following cases: in axial tension of the shell with unequal forces applied to the end faces of bearing layers (the parameter of critical load is maximum if the tensile forces are equal); under external (internal) pressure; on cooling the outer and heating the inner layers. The results obtained are presented in the form of simple analytical formulas for determining the corresponding critical parameters of the force and thermal actions.Translated from Mekhanika Kompozitnykh Materialov, Vol. 41, No. 1, pp. 37–48, January–February, 2005.     

Deformation of viscoelastic thick-walled shells in the post-critical stage

The progressive buckling of a viscoelastic cyclindrical shell with initial imperfections in axial compression is investigated in the geometrically nonlinear formulation. As distinct from previous research, shell deformation curves in the post-critical stage (after snap-through) are obtained for various load levels. The results obtained are in agreement with the experimental data. The experiments show that in the case of thick glass-reinforced plastic shells in the post-critical stage of deformation the material fails by debonding.Institute of Polymer Mechanics, Academy of Sciences of the Latvian SSR, Riga. Translated from Mekhanika Polimerov, No. 1, pp. 96–99, January–February, 1976.     

Stress state of orthotropic shells with a straight slit

A shallow orthotropic shell of arbitrary curvature with a straight slit is examined. Results are presented to describe the numerical effect of the curvature of the shell and the length and orientation of the slit on the stress and moment intensity factors in orthotropic shells made of various orthotropic materials.Translated from Teoreticheskaya i Prikladnaya Mekhanika, No. 18, pp. 63–65, 1987.     

Optimization of cylindrical composite shells with regard to their critical mode of imperfections

This study deals with the optimum design of composite shells under external pressure with material strength and loss of stability according to the critical mode of imperfections taken as the failure criterion. The problem of optimum design is solved and the critical mode is obtained by nonlinear optimum programming for which the geometric and initial imperfection parameters are treated as variables. Numerical results are obtained for a cylindrical composite shell supported freely at its ends. The effect of shear forces between layers on the load-carrying capacity of the shell is also investigated.Presented at the 10th International Conference on the Mechanics of Composite Materials (Riga, April 20–23, 1998).Translated from Mekhanika Kompozitnykh Materialov, Vol. 34, No. 5, pp. 613–620, September–October, 1998.     

Stress state of a composite shell with a sizable opening

The stress-strain state of a nonshallow cylindrical shell of a composite material is investigated. The shell is weakened by a circular hole and loaded with internal pressure. For solving the problem, the variational-difference method is used. The calculations are carried out for an orthotropic shell with a sizable hole, with account of the reduced shear stiffness of the material.Translated from Mekhanika Kompozitnykh Materialov, Vol. 41, No. 1, pp. 49–56, January–February, 2005.     

Shear and Flexural Buckling Modes of a Spherical Sandwich Shell in a Centrosymmetric Temperature Field Inhomogeneous across the Thickness

Problems on buckling modes (BMs) are considered for a spherical sandwich shell with thin isotropic external layers and a transversely soft core of arbitrary thickness in a centrosymmetric temperature field inhomogeneous across the shell thickness. For their statement, the two-dimensional equations of the theory of moderate bending of thin Kirchhoff–Love shells are used for the external layers, with regard for their interaction with the core; for the core, maximum simplified geometrically nonlinear equations of thermoelasticity theory, in which a minimum number of nonlinear summands is retained to correctly describe its pure shear BM, are utilized. An exact analytical solution to the problem on initial centrosymmetric deformation of the shell is found, assuming that the temperature increments in the external layers are constant across their thickness. It is shown that the three-dimensional equations for the core, linearized in the neighborhood of the solution, can be integrated along the radial coordinate and reduced to two two-dimensional differential equations, which supplement the six equations that describe the neutral equilibrium of the external layers. It is established that the system of eight differential equations of stability, upon introduction of new unknowns in the form of scalar and vortical potentials, splits into two uncoupled sets of equations. The first of them has two kinds of solutions, by which the pure shear BM is described at an identical value of the parameter of critical temperature. The second system describes a mixed flexural BM, whose realization, at definite combinations of determining parameters of the shell and over wide ranges of their variation, is possible for critical parameters of temperature by orders of magnitude exceeding the similar parameter of shear BM.     

Stability of a laminated spherical shell

The stability "in the small" of a spherical shell consisting of alternating stiff and soft layers is investigated. The spectra of the bifurcation values of the load are found for a closed shell subject to hydrostatic pressure and their dependence on the buckling mode is studied. The effect of the relative stiffness of the layers on the buckling of the shell is investigated.Moscow Power Engineering Institute. Translated from Mekhanika Polimerov, No. 3, pp. 459–464, May–June, 1976.     

Solution of two-dimensional boundary-value problems of the theory of thin composite shells

Discrete analogues of the boundary-value problems of a two-dimensional refined theory of anisotropic shells taking into account the transverse shear deformation are presented. The systems of resolving equations in the general form are obtained for arbitrary nonshallow shells of variable curvature whose coordinate lines of the reduction surface may not coincide with the lines of principal curvatures. The algebraic problems of determining the stress-strain state in shells made of composite materials with stress concentrators under various kinds of loads are obtained as particular cases of the schemes presented. The results of calculating the stress concentration near a nonsmall circular hole in a transversely isotropic nonshallow spherical shell under internal pressure are presented. The dependences of stress concentration factors on the hole dimension and on a change in the shear stiffness of the shells are studied. A comparison between the calculation results obtained within the framework of the theories of shallow and nonshallow shells is given.Presented at the 11th International Conference on the Mechanics of Composite Materials (Riga, June 11–15, 2000).Timoshenko Institute of Mechanics, Ukranian National Academy of Sciences, Kiev, Ukraine. Translated from Mekhanika Kompozitnykh Materialov, Vol. 36, No. 4, pp. 465–472, July–August, 2000.     

Dynamic stability of an elastic orthotropic cylindrical shell with allowance for transverse shears

The resolvents for the dynamic stability of an elastic orthotropic cylindrical shell are obtained in accordance with the Ambartsumyan and Timoshenko-type refined theories. The regions of instability given by the classical and refined theories are compared. The dependence of the refinements on the shell parameters, the shear moduli of the material, and the buckling modes are investigated.Institute of Polymer Mechanics, Academy of Sciences of the Latvian SSR, Riga. Translated from Mekhanika Polimerov, No. 2, pp. 312–320, March–April, 1973.     

Propagation of Transient Hydroelastic Waves in a Semiinfinite, Piecewise-Constant Cylindrical Shell Containing a Fluid

A solution is formulated for a new problem of wave propagation in a semiinfinite cylindrical shell with a junction connecting two shells of different radii. The material of the shell is assumed to be viscoelastic, and the fluid is assumed to be viscous. The motion of the shell is described by Kirchhoff–Love theory, and the motions of the fluid are described by equations averaged over the cross section. The problem is solved by means of the time Laplace transform and subsequent numerical inversion. The numerical results for the pressure and radial displacement of the shell are analyzed for various values of the parameters.