Photochemical study of [3(3)](1,3,5)cyclophane and emission spectral properties of [3n]cyclophanes (n = 2-6)

Thephotochemical reaction of [3(3)](1,3,5)cyclophane 2, which is a photoprecursor for the formation of propella[3(3)]prismane 18, was studied using a sterilizing lamp (254 nm). Upon photolysis in dry and wet CH2Cl2 or MeOH in the presence of 2 mol/L aqueous HCl solution, the cyclophane 2 afforded novel cage compounds comprised of new skeletons, tetracyclo[6.3.1.0.(2,7)0(4,11)]dodeca-5,9-diene 43, hexacyclo[6.4.0.0.(2,6)0.(4,11)0.(5,10)0(9,12)]dodecane 44, and pentacyclo[6.4.0.0.(2,6)0.(4,11)0(5,10)]dodecane 45. All of these products were confirmed by the X-ray structural analyses. A possible mechanism for the formation of these photoproducts via the hexaprismane derivative 18 is proposed. The photophysical properties in the excited state of the [3n]cyclophanes ([3n]CP, n = 2-6) were investigated by measuring the emission spectra and determining the quantum yields and lifetimes of the fluorescence. All [3n]CPs show excimeric fluorescence without a monomeric one. The lifetime of the excimer fluorescence becomes gradually longer with the increasing number of the trimethylene bridges. The [3n]CPs also shows excimeric phosphorescence spectra without vibrational structures for n = 2, 4, and 5, while phosphorescence is absent for n = 3 and 6. With an increase in symmetry of the benzene skeleton in the [3(3)]- and [3(6)]CPs, the probability of the radiation (phosphorescence) process from the lowest triplet state may drastically decrease.     

Role of singlet diradicals in reactions of 2-carbenabicyclo[3.2.1]octa-3,6-diene

The generation of 2-carbenabicyclo[3.2.1]octa-3,6-diene (1) results in the formation of C(8)H(8) hydrocarbons endo-6-ethynylbicyclo[3.1.0]hex-2-ene (4), semibullvalene (5), and 5-ethynyl-1,3-cyclohexadiene (6), and C(8)H(10) hydrocarbons bicyclo[3.2.1]octa-2,6-diene (7), tricyclo[3.2.1.0(4,6)]oct-2-ene (8), and tetracyclo[3.3.0.0(2,8)0(4,6)]octane (9). Focus is placed on three mechanistic pathways for the formation of the C(8)H(10) hydrocarbon fraction: (a) abstraction of hydrogen by triplet carbene 1T to produce an equilibrating set of monoradicals, (b) interconversion of triplet carbene 1T into tricyclic triplet diradical 19T and tetracyclic triplet diradical 20T, and (c) interconversion of singlet 1S with analogous singlet diradical 19S and 20S. Ab initio calculations at the (U)B3LYP/6-311+G(3df,2p)//(U)B3LYP/6-31G(d,p) and broken spin symmetry UBS B3LYP/6-311+G(3df,2p)//B3LYP/6-31G(d,p) levels rule out choices (a) and (b) and are consistent with the singlet diradical process.     

cis-endo-Bicyclo[1.1.1]pentane-1,2,3,4- tetracarboxylic acid and its derivatives

[reaction: see text] We report the synthesis of cis-endo-bicyclo[1.1.1]pentane-1,2,3,4-tetracarboxylic acid and several of its derivatives with differentiated bridgehead and bridge positions, starting with tetracyclo[3.2.0.0(1,6).0(2,6)]heptane.     

Carbon-13 chemical shifts of bicyclo[3.2.1]octane and bicyclo[2.2.1]heptane derivatives

¹³C chemical shifts of more than fifty bicyclo[3.2.1]octane and bicyclo[2.2.1]heptane derivatives (hydrocarbons, alcohols, ketones and esters) have been determined. The usefulness of ethyl derivatives for the assignment of close ¹³C chemical shifts in bicyclic methyl derivatives is shown both for the bicyclo[3.2.1]octane and bicyclo[2.2.1]heptane series. Comparison of substituent effects on α-, β-, γ- and δ-carbons in both series of compounds shows remarkable differences in steric interactions. In contrast to the rigid bicyclo[2.2.1]heptane system, both chair and boat conformations can be predominant in the bicyclo[3.2.1]octane series with the conformationally flexible 6-membered ring.     

The bromination of bicyclo[3.2.1]octa-2,6-diene with N-bromosuccinimide

The bromination of bicyclo[3.2.1]octa-2,6-diene (3) by NBS does not follow the familiar free-radical course but proceeds through the cyclopropylcarbinyl cation 7. 7 can be trapped by addition of small amounts of methanol. The bicyclo[3.2.1]octa-2,6-dien-4-yl radical is involved in the reduction of exo-6-bromotricyclo [3.2.1.0^2,7]oct-3-ene by tributyltin hydride.     

13C NMR spectra of tricyclo[4.2.1.02,5]nonanes and tetracyclo[5.4.1.02,6.08,11]dodecanes

The ¹³C NMR spectra of tricyclo[4.2.1.0^2,5]nonanes and tetracyclo[5.4.1.0^2,6.0^8,11]dodecanes and their dimethyl derivatives were measured to demonstrate the four-membered ring annelation effects on the bicyclo[2.2.1]heptane skeleton, and the steric δ-syn effects of the methyl groups attached to the four-membered ring on the bridge carbons in these systems.     

Synthesis of highly functionalised enantiopure bicyclo[3.2.1]- octane systems from carvone

The commercially available monoterpene carvone has been efficiently converted into the tricyclo[3.2.1.0(2.7)]octane and bicyclo[3.2.1]octane systems characteristic of some biologically active compounds. The sequence used for this transformation involves as key features an intramolecular Diels-Alder reaction of a 5-vinyl-1,3-cyclohexadiene and a cyclopropane ring opening.     

Bicyclo[3.2.1]octa-3,6-dien-2-yl cation: a bishomoantiaromate

Antiaromatic compounds with a closed loop of 4n p-electrons are relatively unstable and often difficult to study. We report in this article the synthesis of alcohols 2-(4'-fluorophenyl)bicyclo[3.2.1]octan-2-ol 11, 2-(4'-fluorophenyl)bicyclo[3.2.1]oct-3-en-2-ol 12, and 2-(4'-fluorophenyl)bicyclo[3.2.1]octa-3,6-dien-2-ol 13 and their transformations into corresponding carbocations 14-16, respectively, in a superacidic medium (FSO3H/SO2ClF) at -120 degrees C. Cations 14-16 are characterized by NMR analysis (1H, 13C, 19F), and 15 and 16 are further characterized by quenching in NaOCH3/H3COH at -120 degrees C. The relative stabilities of 14-16 are determined experimentally by 19F NMR spectroscopy. Cation 16 is found to be experimentally less stable than cation 15 by 3.7 kcal/mol. DFT calculations (structure and energy: B3LYP/6-31G(d); NMR: B3LYP/6-311+G(2d,p)) are performed for alcohols 11-13 and bicyclo[3.2.1]octyl cations 6, 7, 9, 14-16, 26, 28, and 30. In the case of 11-16, data from DFT calculations is in good agreement with experimental data. Because 6,7-dimethylenebicyclo[3.2.1]oct-3-en-2-yl cation 26 is more stable than cation 7 by 1.69 kcal/mol, the inductive effect of sp(2)-hybridized carbon atoms C6 and C7 in carbocations 6 and 16 cannot be the reason for the destabilization of 6 relative to 7 and 16 relative to 15. Destabilization of 6 relative to 7 and 16 relative to 15 and the calculated NICS of 6 (+4.17 ppm) and 16(+3.3 ppm) document that 6 and 16 are bishomoantiaromates.     

Chiral synthons from α-pinene: enantioselective syntheses of bicyclo[3.3.0] and [3.2.1]octanones

Enantioselective syntheses of bicyclo[3.3.0]octan-3-one, bicyclo[3.2.1]octan-3-one and bicyclo[3.2.1]octan-2-one derivatives were accomplished by employing a chiron based approach, using intramolecular rhodium carbenoid C–H insertion, acid catalysed cyclisation of α-diazo ketone and intramolecular type II carbonyl ene reactions as key steps.     

Synthesis of versatile bicyclo[5.4.0]undecane systems from tetrachlorocyclopropene

2,2,3,4-Tetrachloro-8-oxabicyclo[3.2.1]octa-2,6-diene, derived in a single step from the cyclocondensation of furan and tetrachlorocylopropene, serves as a key intermediate for the construction of bicyclo[5.4.0]undecane synthons. Conversion to a meso-1,3 diketone is followed by a high yielding Robinson annulation reaction. Studies on the reduction of the enone product reveals a powerful preference for formation of the cis-ring fusion.     

Reaction of bicyclo[3.2.1]octadiene with 4-methyl-1,2,4-triazoline-3,5-dione: competitive dipolar and homo-cycloaddition

The nonconjugated bicyclo[3.2.1]octa-2,6-diene ($\text{1}$) affords with 4-methyl-1,2,4-triazolin-3,5-dione (MTAD) the homo-cycloadduct ($\text{2}$) product and the rearranged urazoles ($\text{3}$) and ($\text{4}$) through dipolar cycloaddition, while ene-reaction and (2+2)-cycloaddition are not observed.     

Rearrangement of a mesylate tropane intermediate in nucleophilic substitution reactions. Synthesis of aza-bicyclo[3.2.1]octane and aza-bicyclo[3.2.2]nonane ethers,imides, and amines

Nucleophilic substitution of 2beta-mesyloxymethyl-N-methyl-3beta-p-tolyl-tropane intermediate with alkoxides, metal imides, or amines was found to lead not only to the expected bicyclo[3.2.1]octane (tropane) ether, imide, and amine derivatives but also to unexpected bicyclo[3.2.2]nonane derivatives. When alkoxides were used as nucleophile, only the rearranged bicyclo[3.2.2]nonane structure was obtained, whereas the use of amines or imides as nucleophile afforded a mixture of the two structures. The bicyclo[3.2.2]nonane structure was assigned by NMR analysis.     

Reaction of dicobalt octacarbonyl with acetylene and carbon monoxide at low temperature and pressure: Formation of cyclic enone products

Dicobalt octacarbonyl is shown to react with acetylene and carbon monoxide under mild conditions in dimethoxyethane or benzene to produce, in low yields, bicyclo[3.3.0]octa-3,7-diene-2,6-dione, benzoquinone, and the cyclopentadienone-derived products 3a,4,7,7a-tetrahydro-2,7-methanoindene-1,10-dione, 1-indanone, tetracyclo[5.5.2.0^2,60^8,12]tetradeca-4,10,13-triene-3,9-dione, and tetracyclo[5.5.2.0^2,60^8,12]tetradeca-4,9,13-triene-3,11-dione. Possible mechanisms for the formation of these products are discussed.     

3-Bromopyrazolo[3,4-d]pyrimidine 2'-deoxy-2'-fluoro-beta-D-arabinonucleosides: modified DNA constituents with an unusually rigid sugar N-conformation

The nucleobase anion glycosylation of 3-bromo-4-isopropoxy-1H-pyrazolo[3,4-d]pyrimidin-6-amine (6) with 3,5-di-O-benzoyl-2-deoxy-2-fluoro-alpha-d-arabinofuranosyl bromide (5) furnished the protected N(1)-beta-d-nucleosides 7 (60%) and 8 (ca. 2%) along with the N(2)-beta-d-regioisomer 9 (9%). Debenzoylation of compounds 7 and 9 yielded the nucleosides 10 (81%) and 11 (76%). Compound 10 was transformed to the 2'-deoxyguanosine derivative 1 [6-amino-3-bromo-1-(2-deoxy-2-fluoro-beta-d-arabinofuranosyl)-1H-pyrazolo[3,4-d]pyrimidin-4-one] (85% yield) and the purine-2,6-diamine analogue 2 [3-bromo-1-(2-deoxy-2-fluoro-beta-d-arabinofuranosyl)-1H-pyrazolo[3,4-d]pyrimidin-4, 6-diamine] (78%). Both nucleosides form more than 98% N-conformer population (P(N) ca. 358 degrees and psi(m) ca. 37 degrees ) in aqueous solution. Single-crystal X-ray analysis of 1 showed that the sugar moiety displays also the N-conformation [P = 347.3 degrees and psi(m) = 34.4 degrees ] in the solid state. The remarkable rigid N-conformation of the pyrazolo[3,4-d]pyrimidine 2'-deoxy-2'-fluoro-beta-d-arabinonucleosides 1 and 2 observed in solution is different from that of the parent purine 2'-deoxy-2'-fluoro-beta-d-arabinonucleosides 3 and 4, which are in equilibrium showing almost equal distribution of the N/S-conformers.     

Electronic structures of tris(dioxolene)chromium and tris(dithiolene)chromium complexes of the electron-transfer series [Cr(dioxolene)(3)](z) and [Cr(dithiolene)(3)](z) (z = 0, 1-, 2-, 3-). A combined experimental and density functional theoretical study

From the reaction mixture of 3,6-di-tert-butylcatechol, H2[3,6L(cat)], [CrCl3(thf)3], and NEt3 in CH3CN in the presence of air, the neutral complex [CrIII(3,6L*(sq))3] (S = 0) (1) was isolated. Reduction of 1 with [Co(Cp)2] in CH2Cl2 yielded microcrystals of [Co(Cp)2][CrIII(3,6L*(sq))2(3,6L(cat))] (S = 1/2) (2) where (3,6L*(sq)(1-) is the pi-radical monoanionic o-semiquinonate of the catecholate dianion (3,6Lcat)(2-). Electrochemistry demonstrated that both species are members of the electron-transfer series [Cr(3,6LO,O)]z (z = 0, 1-, 2-, 3-). The corresponding tris(benzo-1,2-dithiolato)chromium complex [N(n-Bu)4][CrIII(3,5L*S,S)2(3,5LS,S)] (S = 1/2) (3) has also been isolated; (3,5LS,S)(2-) represents the closed-shell dianion 3,5-di-tert-butylbenzene-1,2-dithiolate(2-), and (3,5L*S,S)(1-) is its monoanionic pi radical. Complex 3 is a member of the electron-transfer series [Cr(3,5L(S,S))3]z (z = 0, 1-, 2-, 3-). It is shown by Cr K-edge and S K-edge X-ray absorption, UV-vis, and EPR spectroscopies, as well as X-ray crystallography, of 1 and 3 that the oxidation state of the central Cr ion in each member of both electron-transfer series remains the same (+III) and that all redox processes are ligand-based. These experimental results have been corroborated by broken symmetry density functional theoretical calculations by using the B3LYP functional.     

Opening the [4 + 2 + 2] cycloadducts of bicyclo[2.2.1]hepta-2,5-dienes (norbornadienes) to cis-fused bicyclo[5.3.0]decanes

Tetracyclo[5.4.0.0.(2,4)0(3,7)]undec-9-enes, prepared by the transition-metal-catalyzed [4 + 2 + 2] homo-Diels-Alder reactions of norbornadiene and 1,3-butadienes, can be opened using either acid-promoted or Zeise's dimer-mediated cyclopropane ring cleavage, ultimately leading to cis-fused bicyclo[5.3.0]decanes (perhydroazulenes). Stereoselective functionalization of the olefin unit in the tetracycloundecenes to an alcohol or diol prior to ring opening is tolerated by the Zeise's dimer ([Pt(C(2)H(4))Cl(2)](2)) catalyst to yield highly functionalized bicyclo[5.3.0]decanes, which form the core structure of numerous sesquiterpenes.     

Conformations and reactions of bicyclo[3.2.1]oct-6-en-8-ylidene

Bicyclo[3.2.1]oct-6-en-8-ylidene (1) can assume either the conformation of "classical" carbene 1a or that of foiled carbene 1b in which the divalent carbon bends toward the double bond. Oxadiazoline precursors for the generation of 1 were prepared, followed by photochemical and thermal decomposition as well as flash vacuum pyrolysis (FVP) of a tosyl hydrazone sodium salt precursor, to give a number of rearrangement products. Matrix isolation experiments demonstrate the presence of a diazo intermediate and methyl acetate in all photochemical and thermal precursor reactions. The major product from rearrangements of "classical" bridged carbene 1a is bicyclo[3.3.0]octa-1,3-diene as a result of an alkyl shift, while dihydrosemibullvalene formed from a 1,3-C-H insertion. In contrast, thus far unknown strained bicyclo[4.2.0]octa-1,7-diene formed by a vinyl shift in foiled carbene 1b. The experimental results are corroborated by density functional theory (DFT), MP2, and G4 computations.     

Thermal rearrangement of divinylcyclopropane systems. Preparation of functionalized,stereochemically defined bicyclic and tricyclic products containing the bicyclo[3.2.1]octane skeleton

A study involving the preparation and thermolysis of substituted 6-$\text{exo}$-(1-alkenyl)bicyclo[3.1.0]hex-2-ene systems (14, 15, 23, 29, 40) shows (a) that C-8 functionalized bicyclo[3.2.1]octa-2,6-dienes can be prepared readily $\text{via}$ this methodology (14 → 16; 15 → 17), (b) that the rearrangement reaction is stereospecific even when the 6-(1-alkenyl) group is substituted with a sterically bulky isopropyl group (23 → 24; 29 → 30), and (c) that the method can be extended to include the preparation of tricyclic systems (40 → 41).     

Carbon-13 n.m.r. studies. 65—13C spectra of some tricyclo[3.2.1.02,4]octane derivatives

The ¹³C n.m.r. spectra of 18 derivatives of the tricyclo[3.2.1.0^2,4]octanes have been determined. This series includes methyl, hydroxyl and oxo substituted examples to compare the effects of these substituents on the skeletal carbon shieldings with those observed for the corresponding norbornanes and bicyclo[3.2.1]octanes. In general, the trends are similar and the perturbations associated with closely neighboring groups follow a consistent pattern. The shielding data for the exo–exo and exo–endo isomers of tetracyclo[3.3.1.0^2,40^6,8]nonane are also reported.     

The Synthesis of 5,6-Disubstituted Bicyclo[2.1.1]hexenes and 3,5-Disubstituted Tricyclo[2.2.0.02,6]hexanes

There are relatively few methods for synthesizing bicyclo[2.1.1]-hexenes and tricyclo[2.2.0.0^2,6]hexanes.¹ However, now that benzvalene (I), the highly strained structural isomer of benzene has become a readily available compound,² it is possible to prepare disubstituted compounds like II and III in a straightforward fashion.