X-ray initiated molecular photochemistry of Cl-containing adsorbates on a Si(1 0 0) surface using synchrotron radiation

X-ray initiated molecular photochemistry for SiCl₄ and CCl₄ adsorbed on Si(1 0 0) at ∼90 K following Cl 2p core-level excitation is investigated by photon stimulated ion desorption and ion kinetic energy distribution measurements. The Cl excitation of solid SiCl₄ induces the significant enhancement (∼900%) of the Cl⁺ yield, while the Cl excitation of condensed CCl₄ leads to a moderate enhancement (∼500%) of the Cl⁺ yield. The enhancement of Cl⁺ yield at the specific core-excited states is strongly correlated to the ion escaped energy. Upon X-ray exposure for CCl₄ adsorbed on Si(1 0 0) (20-L exposure), the Cl⁺ yields at resonances decrease and new structures at higher photon energies are observed. Cl⁺ yields at these new resonances are significantly enhanced compared to those at other resonances. These changes are the results of desorption and surface reaction of the CCl₄-Si surface complex due to X-ray irradiation. We have demonstrated that state-specific enhancement of ion desorption can be successfully applied to characterize the reaction dynamics of adsorbates adsorbed on surfaces by X-ray irradiation.     

Dynamics of NF3 in a condensed film on Au(1 1 1) as studied by electron-stimulated desorption

We report a low-temperature dynamics study of condensed layers of NF₃ on Au(1 1 1) by time-of-flight electron-stimulated desorption ion angular distribution (TOF-ESDIAD), temperature-programmed desorption (TPD) and low-temperature scanning tunneling microscopy (LT-STM). Upon adsorption at 30 K, molecular NF₃ adsorption occurs first at the step edges and at minor terrace defect sites with the formation of 2D islands. Within the islands, NF₃ is adsorbed in an upright conformation via the nitrogen lone pair electrons projecting fluorine atoms away from the surface as judged by the presence of only a sharp F⁺ central beam in the ESDIAD pattern. At higher coverages, 3D islands start to populate the surface. Electron bombardment of a thick NF₃ (∼6 ML) layer adsorbed on the Au(1 1 1) surface leads to emission of F⁺, N⁺, NF⁺, and ions as observed in the TOF-ESD distribution. Upon heating to ∼37 K, a sudden decrease of the and ion yield, which is not related to thermal desorption, is observed which reflects the surface migration of NF₃ molecules, leading to local thinning of the film. The thinning process occurs at the temperature of onset of molecular rotations and self-diffusion in the bulk NF₃ crystal. In this process, some NF₃ molecules move closer to the surface which results in higher efficiency for ion neutralization by the underlying metal surface. In the TPD spectra, the monolayer desorption is observed to begin at ∼65 K, exhibiting zero-order kinetics with an activation energy of 21 kJ/mol.     

Anomalous adsorption of Cs on Pt(1 1 1)

The adsorption of Cs on Pt(1 1 1) surfaces and its reactivity toward oxygen and iodine for coverages θ_Cs?0.15 is reported. These surfaces show unusual “anomalous” behavior compared to higher coverage surfaces. Similar behavior of K on Pt(1 1 1) was previously suggested to involve incorporation of K into the Pt lattice. Despite the larger size of Cs, similar behavior is reported here. Anomalous adsorption is found for coverages lower than 0.15 ML, at which point there is a change in the slope of the work function. Thermal Desorption Spectroscopy (TDS) shows a high-temperature Cs peak at 1135 K, which involves desorption of Cs⁺ from the surface.The anomalous Cs surfaces and their coadsorption with oxygen and iodine are characterized by Auger Electron Spectroscopy (AES), TDS and Low Electron Energy Diffraction (LEED). Iodine adsorption to saturation on Pt(1 1 1)(anom)-Cs give rise to a sharp LEED pattern and a distinctive work function increase. Adsorbed iodine interacts strongly with the Cs and weakens the Cs-Pt bond, leading to desorption of Cs_xI_y clusters at 560 K. Anomalous Cs increases the oxygen coverage over the coverage of 0.25 ML found on clean Pt. However, the Cs-Pt bond is not significantly affected by coadsorbed oxygen, and when oxygen is desorbed the anomalous cesium remains on the surface.     

Laser excitation spectrum of C3 in the region 26 000-30 700 cm

The vibrational structure of the electronic state of C₃ in the region 26 000-30 775 cm⁻¹ has been re-examined, using laser excitation spectra of jet-cooled molecules. Rotational constants and vibrational energies have been determined for over 60 previously-unreported vibronic levels; a number of other levels have been re-assigned. The vibrational structure is complicated by interactions between levels of the upper and lower Born-Oppenheimer components of the state, and by the effects of the double minimum potential in the Q₃ coordinate, recognized by Izuha and Yamanouchi [16]. The present work shows that there is also strong anharmonic resonance between the overtones of the ν₁ and ν₃ vibrations. For instance, the levels 2 1⁺ 1 and 0 1 ⁺ 3 are nearly degenerate in zero order, but as a result of the resonance they give rise to two levels 139 cm⁻¹ apart, centered about the expected position of the 2 1⁺ 1 level. With these irregularities recognized, every observed vibrational level up to 30 000 cm⁻¹ (a vibrational energy of over 5000 cm⁻¹) can now be assigned. A vibronic level at 30181.4 cm⁻¹, which has a much lower B′ rotational constant than nearby levels of the state, possibly represents the onset of vibronic perturbations by the electronic state; this state is so far unknown, but is predicted by the ab initio calculations of Ahmed et al. [36].     

The electronic structure and reactivity of the oxygen-modified Mo2C(0 0 0 1) surface

Oxygen adsorption on Mo₂C(0 0 0 1) has been investigated with angle-resolved photoemission spectroscopy (ARPES). When the surface is reacted with O₂, the O 2p-induced states are formed at 4.1 and 5.3 eV at the point. The emissions around the Fermi level are also intensified by oxygen adsorption, which is due to the formation of a partially filled state. It is found that the reactivity of the surface toward H₂O adsorption is much enhanced by pre-adsorption of oxygen. The reactivity is found to be maximized at θ_O ∼ 0.2.     

The v6 = 1 and v6 = 2 vibrational states of DCF3

The high-resolution infrared spectra of DCF₃ were reinvestigated in the ν₆ fundamental band region near 500 cm⁻¹ and around 1000 cm⁻¹ with the aim to assign and analyze the overtone level of the asymmetric CF₃ bending vibration v₆ = 2.The present paper reports on the first study of both its sublevels (A₁ and E corresponding to l = 0 and ±2, respectively) through the high-resolution analysis of the overtone band and the hot and bands.The well-known “loop method”, applied to and , yielded ground state energy differences Δ(K, J) = E₀(K, J) − E₀(K − 3,J) for the range of K = 6 to 30.In the final fitting of molecular parameters, we used the strategy of fitting all upper state data together with the ground state rotational transitions.This is equivalent to that calculating separately the and coefficients of the K-dependent part of the ground state energy terms from the combination loops.All rotational constants of the ground state up to sextic order could be refined in the calculation.This led to a very accurate determination of C₀ = 0.18924413(25) cm⁻¹, , and also .In the course of analyzing simultaneously the overtone band together with the and ν₆ bands, the original assignment of the fundamental ν₆ band [Bürger et al., J. Mol. Spectrosc. 182 (1997) 34-49] was found to be incompatible with the present one. Assignments of the (k + 1, l₆ = +1)/(k − 1,l₆ = −1) levels had to be interchanged, which changed the value of Cζ₆ = −0.14198768(26) cm⁻¹ and the sign of the combination of constants C − B − Cζ in the v₆ = 1 level to a negative value.     

One-dimensional defects in iodine adlayers on Pt(1 0 0)

One-dimensional defect structures of closed-packed adlayers of iodine on Pt(1 0 0) were studied with scanning tunneling microscopy (STM). On the terraces of the Pt(1 0 0) surface we observed rotational domains with line defects running in [0 1 0] directions, in coexistence with nearly defect-free domains. In addition to these prevailing line defects (A-defects) with a local coverage lower than that of a defect-free surface, we report on much less frequently observed line defects with higher local coverages (B- and C-defects). The strong dependence of the concentration of these defects on the adsorption temperature is governed by the decrease of the overall iodine coverage with increasing temperature. Iodine adsorption at ∼1100 K leads to self-organization of A-defects in quasi-periodic arrangements. The relevance of these defects as important structural elements of commensurate superstructures of iodine on Pt(1 0 0) is stressed.     

Electron-phonon interaction in magnesium: From the monolayer to the Mg(0 0 0 1) surface

We report ab initio study of the electron-phonon coupling in a free standing magnesium monolayer and at the Mg(0 0 0 1) surface. The calculations were carried out using a linear-response approach in the plane-wave pseudopotential representation. Eliashberg spectral function α²F(ω) averaged over electron states at the Fermi surface is presented for the monolayer while for the Mg(0 0 0 1) surface, we compute the electron-phonon spectral function α²F_k,i(ω) for surface states at the and points.     

Shell model calculations of the adsorption and diffusion of K, Cl, and KCl on KCl(0 0 1)

Equilibrium adsorption positions and diffusion pathways of the ions K⁺ and Cl⁻ as well as of the molecule KCl on the terrace of the (0 0 1) surface of KCl were determined by shell model calculations allowing relaxations of the crystal lattice in the vicinity of the adsorbed species. For the ions each one adsorption position was found, in which the ions are located above the hollow site at the center of a slightly distorted square formed by two cations and two anions of the uppermost surface layer of the KCl crystal. Adsorption energies of −1.52 eV for K⁺ and −1.61 eV for Cl⁻ were calculated. Jumps of the ions occur from these positions to adjacent hollow positions in the ±[1 0 0] and ±[0 1 0] directions with a jump distance of a₀/2. The activation energies for the jumps result as 0.142 for K⁺ and 0.152 eV for Cl⁻ and the mean diffusion lengths as and . For the KCl molecule four distinct adsorption minima with energies between −0.932 and −0.825 eV were found. Because of the smaller lattice relaxation caused by the molecule the adsorption energies are considerably lower than for the single ions. In the position with the largest adsorption energy the ions of the admolecule are again placed above adjacent hollow sites. In two more adsorption positions only one ion is at the hollow site and the other one in a top position above an oppositely charged ion of the surface. In the fourth position with the smallest adsorption energy both ions are in top positions. Jumps between the different adsorption positions proceed by rotations of the molecule, in which one of its ions remains essentially attached to a local minimum position. The diffusion and desorption of a KCl molecule was studied by a Monte Carlo method, resulting in a mean diffusion length x_s (nm) = 0.39 exp[0.84 (eV)/2kT], which agrees rather well with an experimental value of . Values for the mean stay time as well as for the surface diffusion coefficient are derived.     

Absolute frequency measurements and comparisons in iodine at 735 nm and 772 nm

We report frequency measurements at the rovibronic transition P(42)1-14 (772 nm) and R(114)2-11 (735 nm) from the electronic transition of the iodine molecule ¹²⁷I₂ with the help of a frequency comb as a reference. By using Doppler-free saturation spectroscopy a frequency precision in the 7 × 10⁻¹⁰ region is reached and two iodine cells both operated at 550-600 °C are compared. To relate our results to other measurements, the absolute transition frequency of the hyperfine structure line P(148)1-14 a₁ at 780 nm with an already known transition frequency was also determined.     

A novel approach to measure the step line tension and the step dipole moment on vicinal Au(0 0 1) electrodes

In this paper we introduce a new experimental approach to determine the potential dependence of the step line tension on metal electrodes in contact with an electrolyte: (0 0 1) and (1 1 n) surfaces of single crystal gold electrodes were investigated by impedance spectroscopy in solutions containing weakly adsorbing anions, such as , F⁻ and . Within the limits of error the shift in the potential of zero charge is proportional to the step density of the vicinal surfaces indicative of a well-defined dipole moment per step length. The dipole moments per step atom are 6.8 ± 0.8, 5.2 ± 0.4, 5.8 ± 0.5 × 10⁻³ eÅ for , , and F⁻ containing electrolytes, respectively. Using the values for the pzc and the potential dependence of the capacitance curves, the potential dependence of the surface tension of the vicinal surfaces is determined. The line tension of the steps is then calculated from the difference between the surface tension of the stepped and the step free surface. Our results represent the first experimental confirmation of a recent theoretical model proposing that in absence of specifically adsorbed ions the step line tension should decrease (roughly linear) with potential.     

Substantially low desorption barriers in recombinative desorption of deuterium from a Si(1 0 0) surface

We have studied desorption kinetics of deuterium molecules from a Si(1 0 0) surface by means of temperature-programmed desorption (TPD) spectra and isothermal desorptions.Three desorption components, denoted as β_1,A,β_1,B, and C, can be distinguished in semi-logarithmic plots of the TPD spectra.Their peak positions and intensities are strongly affected by the surface preparation methods employed, either with or without annealing to control the initial D coverage .Peak C appears at the leading edge of the TPD peak.It accounts for only about 5% of the TPD peak at and it diminishes rapidly with decreasing , vanishing at .In contrast, together the β_1,A and β_1,B peaks account for the whole TPD peak at any less than 1.0 ML. The maximum of the β_1,A peak is nearly constant at around the maximum temperature of the TPD peak.On the other hand, the β_1,B peak appears on the high-temperature side of the TPD peak and it systematically shifts to higher temperatures with decreasing .These results imply that first- and second-order kinetics are operating for the β_1,A and β_1,B desorptions, respectively.Isothermal desorption experiments confirm the above predicted kinetics for a limited region, namely .From the results for the rate curve analysis, the desorption barriers are evaluated to be 1.6 ± 0.1 eV and 1.8 ± 0.1 eV for the β_1,A and β_1,B desorptions, respectively.These values are substantially lower than the widely accepted value of ∼2.5 eV. To reproduce the measured TPD spectra we take the Arrhenius-type rate equation containing the first- and second-order rate terms for the β_1,A and β_1,B desorptions.The TPD spectra measured for can be reasonably fit with the proposed rate equation when the values given above for E_d,A and E_d,B are used. For , however, the TPD curves are not fit with the same values; rather, the best-fit curves require values for E_d,A and E_d,B larger than those given above. Combining the present kinetics results with those obtained by STM along with the studies, the β_1,A and β_1,B peaks may be attributed to desorption along the 2H path, while peak C may be attributed to desorption along the 4H path. The atomistic desorption mechanism as well as the energy relationship between the desorption barrier and isosteric heat of adsorption are discussed.     

Rotational levels of the (0 0 0) and (0 1 0) states of D2O from hot emission spectra in the 320-860 cm region

The far-infrared emission spectra of deuterated water vapour were measured at different temperatures (1370, 1520, and 1950 K) in the range 320-860 cm⁻¹ at a resolution of 0.0055 cm⁻¹. The measurements were performed in an alumina cell with an effective length of hot gas of about 50 cm. More than 1150 new measured lines for the D₂¹⁶O molecule corresponding to transitions between highly excited rotational levels of the (0 0 0) and (0 1 0) vibrational states are reported. These new lines correspond to rotational states with higher values of the rotational quantum numbers compared to previously published determinations: J_max=26 and for the (0 0 0) ← (0 0 0) band, J_max=25 and for the (0 1 0) ← (0 1 0) band, and J_max=26 and for the (0 1 0) ← (0 0 0) band. The estimated accuracy of the measured line positions is 0.0005 cm⁻¹. To our knowledge no experimentally measured rotational transitions for D₂¹⁶O within an excited vibrational state have been available in the literature so far. An extended set of experimental rotational energy levels for (0 0 0) and (0 1 0) vibration states including all previously available data has been determined. For the data reduction we used the generating function model. The root mean square (RMS) deviation between observed and calculated values is 0.0012 cm⁻¹ for 692 rotational levels of the (0 0 0) state and 0.0010 cm⁻¹ for 639 rotational levels of the (0 1 0) vibrational state. A comparison of the observed energy levels with the best available values from the literature and with the global predictions from molecular electronic potential energy surface [J. Chem. Phys. 106 (1997) 4618] for the (0 0 0) and (0 1 0) states is discussed.     

Surface treatments toward obtaining clean GaN(0 0 0 1) from commercial hydride vapor phase epitaxy and metal-organic chemical vapor deposition substrates in ultrahigh vacuum

We studied processes of cleaning GaN(0 0 0 1) surfaces on four different types of wafers: two types were hydride vapor phase epitaxy (HVPE) free-standing substrates and two types were metal-organic chemical vapor deposition (MOCVD) films grown on these HVPE substrates and prepared by annealing and/or Ar ion sputtering in ultra high vacuum. We observed the surfaces through treatments using in situ low-energy electron diffraction (LEED), reflection high-energy electron diffraction (RHEED), scanning tunneling microscopy (STM), and Auger electron spectroscopy, and also using ex situ temperature programmed desorption, X-ray photoelectron spectroscopy, X-ray diffraction, and secondary ion mass spectrometry. For HVPE samples, we obtained relatively clean surfaces under optimized three-step annealing conditions (200 °C for 12 h + 400 °C for 1 h + 500 °C for 5 min) without sputtering, after which the surface contamination of oxide and carbide was reduced to ∼20% of that before annealing. Clear GaN(0 0 0 1)1×1 patterns were obtained by LEED and RHEED. STM images showed flat terraces of ∼10 nm size and steps of ∼0.5 nm height. Upon annealing the HVPE-GaN samples at a much higher temperature (C), three-dimensional (3D) islands with facets were formed and the surface stoichiometry was broken down with the desorption of nitrogen in the form of ammonia, since the samples include hydrogen as an impurity. Ar⁺ sputtering was effective for removing surface contamination, however, postannealing could not recover the surface roughness but promoted the formation of 3D islands on the surface. For MOCVD/HVPE homoepitaxial samples, the surfaces are terminated by hydrogen and the as-introduced samples showed a clear 1×1 structure. Upon annealing at 500-600 °C, the surface hydrogen was removed and a 3×3 reconstruction structure partially appeared, although a 1×1 structure was dominant. We summarize the structure differences among the samples under the same treatment and clarify the effect of crystal quality, such as dislocations, the concentration of hydrogen impurities, and the residual reactant molecules in GaN films, on the surface structure.     

Aromatic interactions in the close packing of phenyl-imides at Cu(1 1 0) surfaces

The oxidation of aniline at Cu(1 1 0) surfaces at 290 K has been studied by XPS and STM. A single chemisorbed product, assigned to a phenyl imide (C₆H₅N(a)), is formed together with water which desorbs. Reaction with preadsorbed oxygen results in a maximum surface concentration of phenyl imide of 2.8 × 10¹⁴ mol cm⁻² and a surface dominated by domains of three structures described by , and unit meshes. However, concentrations of phenyl imide of up to 3.3 × 10¹⁴ mol cm⁻² were obtained from the coadsorption of aniline and dioxygen (300:1 mixture) resulting in a highly ordered biphasic structure with and domains. Comparison of the STM and XPS data shows that only half the phenyl imides at the surface are imaged. Pi-stacking of the phenyl rings is proposed to account for this observation.     

Ultra-thin films and surface alloying of Pd on Cu(1 1 1) investigated by medium energy ion scattering

The structure of Pd films on Cu(1 1 1) and the alloying between the films and the substrate have been investigated by medium energy ion scattering (MEIS) using 100 keV H⁺ ions. Data are presented for the and alignments (nominal one- and three-layer alignments, respectively). It is found that beyond 1 ML the Pd grows in a twinned fcc structure, the incommensurate nature of which increases the visibility of the Cu(1 1 1) substrate to MEIS. Deposition of 0.2 ML of Pd produces a structure in which Pd mostly occupies the top two layers which have interlayer distances d₁₂ = 208 ± 4 pm and d₂₃ = 211 ± 4 pm. Some twinning is also present in this structure. Upon annealing 1.6 ML of Pd to 600 K for 1 min, the copper and palladium interdiffuse leaving around 0.4 ML of visible palladium. Energy plots show that there are several layers with an altered structure present over at least part of the surface. This may be due to large scale interdiffusion or alloy island formation. Incremental annealing to successively higher temperatures shows that the structural transformation begins around 500 K.     

Spin in the worldline path integral in 2 + 1 dimensions

We present a constructive derivation of a worldline path integral for the effective action and the propagator of a Dirac field in 2 + 1 dimensions, in terms of spacetime and SU(2) paths. After studying some general properties of this representation, we show that the auxiliary gauge-group variable can be integrated, deriving a worldline action depending only on x(τ), the spacetime paths. We then show that the functional integral automatically imposes the constraint , while there is a spin action, which agrees with the one one should expect for a spin- field.     

First-principles study of adsorption and diffusion on Ge/Si(0 0 1)-(2 × 8) and Ge/Si(1 0 5)-(1 × 2) surfaces

Using first-principles total-energy calculations, we have investigated the adsorption and diffusion of Si and Ge adatoms on Ge/Si(0 0 1)-(2 × 8) and Ge/Si(1 0 5)-(1 × 2) surfaces. The dimer vacancy lines on Ge/Si(0 0 1)-(2 × 8) and the alternate S_A and rebonded S_B steps on Ge/Si(1 0 5)-(1 × 2) are found to strongly influence the adatom kinetics. On Ge/Si(0 0 1)-(2 × 8) surface, the fast diffusion path is found to be along the dimer vacancy line (DVL), reversing the diffusion anisotropy on Si(0 0 1). Also, there exists a repulsion between the adatom and the DVL, which is expected to increase the adatom density and hence island nucleation rate in between the DVLs. On Ge/Si(1 0 5)-(1 × 2) surface, the overall diffusion barrier of Si(Ge) along direction is relative fast with a barrier of ∼0.83(0.61) eV, despite of the large surface undulation. This indicates that the adatoms can rapidly diffuse up and down the (1 0 5)-faceted Ge hut island. The diffusion is also almost isotropic along [0 1 0] and directions.     

Modelling of phase transitions and reaction at CO adsorption on oxygen precovered Pd(1 1 1)

Using the interaction parameters up to the third neighbors and activated form of O and CO diffusion and their reaction, the model has been proposed for Monte-Carlo simulations describing the catalytic O + CO → CO₂ reaction and occurring phase transitions on Pd(1 1 1) surface. Upon adsorption of CO the pre-adsorbed oxygen transforms from p(2 × 2)_O phase into and phases in the limit of room and moderate temperatures, respectively. We demonstrate that the kinetic effects determine both the occurrence of the p(2 × 1)_O and disappearance of the phases at moderate and low temperatures, respectively. Using reaction rate as a fit parameter, we show that at room temperature the start of the reaction can be synchronized with the occurrence of phase.