纳米NiO的制备及其谱学特性研究

以醋酸镍、氢氧化钠为原料,吐温80为分散剂,通过固相反应制备了纳米级NiO。 用X射线衍射仪、透射电子显微镜、傅里叶红外光谱、紫外-可见分光光度等方法对材料的粒径、晶格畸变率、形貌以及红外、紫外-可见光的吸收性能进行了表征。结果表明：制得的纳米NiO产物为球形、属立方晶系,粒径大小在9～30 nm左右;晶格畸变率随粒径的增大而减小;纳米NiO红外吸收峰出现在437 cm-1处,与普通粒径的NiO光谱纯(484 cm-1)相比,其吸收峰红移了47 cm-1,体现了纳米NiO的表面效应;不同粒径大小的NiO对紫外-可见光的吸收特性不同。普通粒径的NiO光谱纯在紫外-可见光区域没有吸收,颗粒尺寸越小吸收波长越短,10 nm NiO的紫外-可见光吸收峰位于309 nm处,直接跃迁的光学能带隙约为4.2 eV,比体相材料(3.65 eV)增加0.55 eV,表现出明显的量子尺寸效应。对纳米NiO的谱学特性研究表明该材料在光电领域具有潜在的应用价值。     

Preparation of NiO and CoO nanoparticles using M2+-oleate (M = Ni,Co) as precursor

The preparation of NiO and CoO nanoparticles was reported. The dot-like NiO and flower-like CoO nanoparticles were obtained using M²⁺-oleate (M = Ni, Co) as precursor via thermal decomposition method. Transmission electron microscopic (TEM) images monitored the growth of NiO and CoO nanoparticles. When the reaction complex including M²⁺-oleate (M = Ni, Co) precursor, oleic acid and 1-octadecene was heated to the refluxing temperature (320 °C), the formed NiO and CoO nanoparticles were needle-like and very small, indicating low growth speed. However, when the reaction complex was kept refluxing for 30 min, dot-like NiO and flower-like CoO nanoparticles were observed, suggesting the accelerated growth at this refluxing stage. The difference of the morphology of the resultant NiO and CoO nanoparticles resulted from the difference of their growth mode. Selected-area electron diffraction (SAED) patterns showed the face-centered cubic structures of NiO and CoO nanoparticles. The magnetic property of the nanoparticles was studied using vibrating sample magnetometer (VSM).     

The synthesis of highly oriented GaN nanowire arrays

Highly oriented GaN nanowire arrays have been achieved by the catalytic reaction of gallium with ammonium. The resulting materials were characterized by X-ray diffraction (XRD), field-emission scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDS), transmission electron microscopy (TEM) and selected-area electron diffraction (SAED). SEM images show that the resulting materials are nanowire arrays with a uniform length of about 10 μm. XRD, EDS, TEM and SAED indicate that the nanowire arrays are single-crystal hexagonal GaN with a wurtzite structure. They have diameters of 10 to 20 nm. Received: 2 October 2002 / Accepted: 7 October 2002 / Published online: 17 December 2002 RID="*" ID="*"Corresponding author. E-mail: wwwangjc@sina.com     

Magnetic properties of Ni/NiO nanocomposites synthesized by one step solution combustion method

Ni/NiO nanocomposites were synthesized using solution combustion method and characterized with X-ray diffraction (XRD), transmission electron microscopy (TEM), selected area electron diffraction (SAED), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDAX) and carbon, hydrogen, nitrogen (CHN) analyser. The Ni or NiO content in Ni/NiO nanocomposites vary with the quantity of HNO₃ used for the synthesis. Magnetic coercivity (H_c) of Ni/NiO nanocomposites is found to be 413 Oe which can be used in magnetic applications. A feeble exchange bias of 7 Oe is seen from the NiO rich Ni/NiO.     

Fabrication of bamboo-shaped GaN nanorods

Bamboo-shaped GaN nanorods were formed through a simple sublimation method. They were characterized by means of X-ray powder diffraction (XRD), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM) and selected-area electron diffraction (SAED). The TEM image showed that the nanorods were bamboo-like. XRD, HRTEM and SAED patterns indicated that the nanorods were single-crystal wurtzite GaN. Received: 8 January 2001 / Accepted: 28 April 2001 / Published online: 20 December 2001     

Synthesis of ZnS nanorods by annealing precursor ZnS nanoparticles in NaCl flux

ZnS nanorods were fabricated by annealing precursor ZnS nanoparticles, which were prepared by one-step, solid-state reaction of ZnCl₂ and Na₂S through grinding by hand at ambient temperature, in NaCl flux. The as-prepared ZnS nanorods have diameters of 40-80 nm, and lengths up to several micrometers. The structural features and chemical composition of the nanorods were investigated by X-ray diffraction (XRD), transmission electron microscopy (TEM), selected area electron diffraction (SAED), high-resolution transmission electron microscopy (HRTEM), and Raman spectra.     

Generation and characterization of NiO nanoparticles by continuous wave fiber laser ablation in liquid

Pulsed laser ablation in liquid (PLAL) has been widely applied for the generation of nanoparticles (NPs). We report on the generation of NiO NPs using a high-power, high-brightness continuous wave (CW) fiber laser source at a wavelength of 1,070 nm. Characterization of such NPs in terms of size distribution, shape, chemical composition, and phase structure was carried out by transmission electron microscopy (TEM), high-resolution TEM equipped with energy-dispersive X-ray (EDX), and X-ray diffraction (XRD). The results revealed the formation of NiO NPs in water with an average size of 12.6 nm. The addition of anionic surfactant sodium dodecyl sulfate (SDS) reduced the size of NiO NPs down to 10.4 nm. The shape of the NPs was also affected by the SDS, showing the change of shapes from spherical domination in water to tetragonal with increased SDS concentrations. Furthermore, the NiO NPs generated in water and SDS solutions were dual phase containing both cubic and rhombohedral structures. It was also found that the NiO NPs were single crystalline in nature irrespective of the size and shape.     

Adsorptive removal and kinetics of methylene blue from aqueous solution using NiO/MCM-41 composite

Highly ordered mesoporous material MCM-41 was synthesized from tetraethylorthosilicate (TEOS) as Si source and cetyltrimethylammonium bromide (CTAB) as template. Well-dispersed NiO nanoparticles were introduced into the highly ordered mesoporous MCM-41 by chemical precipitation method to prepare the highly ordered mesoporous NiO/MCM-41 composite. X-ray diffraction (XRD) analysis, transmission electron microscopy (TEM) and high-resolution TEM (HRTEM), and nitrogen adsorption–desorption measurement were used to examine the morphology and the microstructure of the obtained composite. The morphological study clearly revealed that the synthesized NiO/MCM-41 composite has a highly ordered mesoporous structure with a specific surface area of 435.9 m² g⁻¹. A possible formation mechanism is preliminary proposed for the formation of the nanostructure. The adsorption performance of NiO/MCM-41 composite as an adsorbent was further demonstrated in the removal azo dyes of methyl orange (MO), Congo red (CR), methylene blue (MB) and rhodaming B (RB) under visible light irradiation and dark, respectively. The kinetics and mechanism of removal methylene blue were studied. The results show that NiO/MCM-41 composite has a good removal capacity for organic pollutant MB from the wastewater under the room temperature. Compared with MCM-41 and NiO nanoparticles, 54.2% and 100% higher removal rate were obtained by the NiO/MCM-41 composite.     

Synthesis of nickel nanoparticles in silica by alcogel electrolysis

We report a novel technique for the formation of metal nanoparticles, based on electrolysis of the alcogels containing metal chlorides. The alcogel was formed from TEOS, water, ethanol, and nickel chloride, and subjected to galvanostatic electrolysis. This resulted in successful formation of Ni nanoparticles inside the silica gel. Average particle size of FCC Ni lies between 18 and 20 nm. The formation of tetragonal nickel (a sub-oxide of nickel) as well as NiO were also detected by XRD and SAED. The resistivity measurements showed that the nickel nanoparticles were separated from each other by Ni(O) present between them. Magnetic studies based on ZFC and FC measurements below room temperature (up to 5 K) and above room temperature (up to 700 K) were conducted using SQUID and Magnetic TGA, respectively, which showed strong magnetic irreversibility as attributable to exchange interaction between metallic and oxide phases and mutual interactions among metallic particles in the network structure. The blocking temperature (~600 K) of the samples was above room temperature. M–H studies based on VSM showed an increase in magnetic coercivity with the formation of NiO. A magnetic transition associated with tetragonal nickel was seen at 10 K.     

Synthesis and enhanced photoluminescence in novel AucoreAu-Agshell nanoparticles embedded Nd-doped antimony oxide glass hybrid nanocomposites

Au_coreAu-Ag_shell nanoparticles and Nd³⁺ ions co-doped in a novel antimony(III) oxide based dielectric (glass) matrix were synthesized for the first time, by a new very simple single-step methodology involving selective thermo-chemical reduction without employing any external reducing agent. They were characterized by the evolution of UV-vis-NIR absorption and photoluminescence spectra, XRD patterns, TEM and SAED images. XRD and SAED indicate the building of core-shell nanoparticles through the formation of (1 1 1) and (2 0 0) planes whereas TEM advocates the generation of spherical and spheroidal particles of 22-107 nm sizes with various core morphologies. Photoluminescence upconversion exhibits two major emission bands of Nd³⁺ ions at 540 (green) and 649 (deep-red) nm which undergo about 5-fold intensity enhancement by the nanoparticles. Such enhancement is attributed to the local field effect induced by plasmonic Au-Ag nanoparticles to Nd³⁺ ions. These nanocomposites are promising for many nanophotonics applications.     

Visible-light photocatalytic degradation of methylene blue with laser-induced Ag/ZnO nanoparticles

The preparation of Ag doped ZnO nanoparticles conducted through the method of laser-induction is presented in this work. The Ag/ZnO nanoparticles attained from various weight percentages of added AgNO₃ relative to ZnO were applied under visible-light irradiation for evaluating the heterogeneous photocatalytic degradations of methylene blue (MB) solutions. It was shown that the catalytic behavior of Ag/ZnO nanoparticles in the visible-light range is notably improved through the Ag deposition onto ZnO nanoparticles by the method of laser-induction with a maximum effectiveness of 92% degradation. The properties of the nanoparticles were characterized by the employments of UV-vis spectroscopy (UV-vis), X-ray diffraction (XRD), transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDX), and selected-area electron diffraction (SAED).     

Spray pyrolyzed NiO–C nanocomposite as an anode material for the lithium-ion battery with enhanced capacity retention

NiO–C nanocomposite was prepared by a spray pyrolysis method using a mixture of Ni(NO₃)₂ and citric acid solution at 600 °C. The microstructure and morphology of the NiO–C composite were characterized by means of X-ray diffraction (XRD), transmission electron microscopy (TEM), energy dispersive spectroscopy (EDS) mapping, and thermogravimetric analysis (TGA). The results showed that the NiO nanoparticles were surrounded by amorphous carbon. Electrochemical tests demonstrated that the NiO–C nanocomposites exhibited better capacity retention (382 mAh g^− 1 for 50 cycles) than that of pure NiO (141 mAh g^− 1 for 50 cycles), which was also prepared by spray pyrolysis using only Ni(NO₃)₂ as precursor. The enhanced capacity retention can be mainly attributed to the NiO–C composite structure, composed of NiO nanoparticles surrounded by carbon, which can accommodate the volume changes during charge–discharge and improve the electrical conductivity between the NiO nanoparticles.     

Influence of embedded particles on microstructure, corrosion resistance and thermal conductivity of CuO/SiO2 and NiO/SiO2 nanocomposite coatings

Homogeneous CuO/SiO₂ and NiO/SiO₂ nanocomposite coatings containing CuO and NiO nanoparticles in silica matrix were successfully synthesized by sol–gel process on an aluminum alloy substrate, respectively. The evolution of phase and morphology of both nanocomposites was characterized by XRD, SEM, TEM and FTIR. The effect of incorporating various nanoparticles on the corrosion behavior and the thermal conductivity of nanocomposite coatings was investigated by potentiodynamic polarization curve and comparative exponential method. The thermal conductivity as well as the corrosion resistance of nanocomposite coatings was significantly improved by the introduction of metal oxide particles. In comparison with NiO/SiO₂ nanocomposite coatings, CuO/SiO₂ composite coatings displayed lower protective behavior as well as higher thermal conductivity. Experimental results revealed that those improvements can directly be related to the nanocomposite effect and the nature of added nanoparticles.     

Growth and morphologies of large-scale SnO2 nanowires, nanobelts and nanodendrites

Single-crystalline SnO₂ nanowires, nanobelts and nanodendrites were synthesized by a simple gas-reaction route on a large scale at 900 °C. They were characterized by means of X-ray powder diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray spectroscopy (EDS), transmission electron microscopy (TEM) and selected-area electron diffraction (SAED). FE-SEM images showed that the products consisted of nanowires, nanobelts and nanodendrites that represent a novel morphology reported for the first time. XRD, SAED and EDS indicated that they were single-crystalline tetragonal SnO₂. The influence of experimental conditions on the morphologies of the products is discussed. Received: 3 June 2002 / Accepted: 10 June 2002 / Published online: 10 September 2002 RID="*" ID="*"Corresponding author. Fax: 86-10/82649531, E-mail: xlchen@aphy.iphy.ac.cn     

Iron oxide nanoparticles for plant nutrition? A preliminary Mössbauer study

One of the most important micronutrients for plants is iron. We have prepared iron(III) oxyhydroxide and magnetite nanoparticles with the aim to use them as possible nutrition source for plants. The iron(III)-oxide/oxyhydroxide nanoparticles prepared under our experimental conditions as colloidal suspensions proved to be 6-line ferrihydrite nanoparticles as verified by XRD, TEM/SAED and Mössbauer spectroscopy measurements. ⁵⁷Fe Mössbauer spectra of magnetite nanoparticles prepared under different preparation conditions could be analyzed on the basis of a common model based on the superposition of four sextet components displaying Gaussian-shaped hyperfine magnetic field distributions.     

微波辅助法制备纤维状NaFeS2纳米粒子及其XPS研究

常温下用微波辅助法制得了直径小于10nm的纤维状NaFeS2 三元化合物纳米粒子,并用X射线粉末衍射、透射电子显微镜、选区电子衍射和X射线光电子能谱对纳米微粒进行了表征。XPS能谱分析表明:产物中含有Na ,Fe,S三种元素,其比值为Na∶Fe∶S =1∶1 1∶1 9。探讨了纤维状NaFeS2 纳米粒子的形成机理。     

Aloe vera plant-extracted solution hydrothermal synthesis and magnetic properties of magnetite (Fe3O4) nanoparticles

Magnetite (Fe₃O₄) nanoparticles have been successfully synthesized by a novel hydrothermal method using ferric acetylacetonate (Fe(C₅H₈O₂)₃) and aloe vera plant-extracted solution. The influences of different reaction temperatures and times on the structure and magnetic properties of the synthesized Fe₃O₄ nanoparticles were investigated. The synthesized nanoparticles are crystalline and have particle sizes of ～6–30 nm, as revealed by transmission electron microscopy (TEM). The results of X-ray diffraction (XRD), High resolution TEM (HRTEM) and selected area electron diffraction (SAED) indicate that the synthesized Fe₃O₄ nanoparticles have the inverse cubic spinel structure without the presence of any other phase impurities. The hysteresis loops of the Fe₃O₄ nanoparticles at room temperature show superparamagnetic behavior and the saturation magnetization of the Fe₃O₄ samples increases with increasing reaction temperature and time.     

Biomimetic synthesis of HgS nanoparticles in the bovine serum albumin solution

HgS nanocrystals conjugated with protein were synthesized in aqueous solution of Bovine Serum Albumin (BSA) at room temperature. The obtained HgS nanoparticles with average diameter about 20–40 nm were characterized by powder X-ray diffraction (XRD), transmission electron microscopy (TEM), selected-area electron diffraction (SAED) and high-resolution transmission electron microscopy (HRTEM). The quantum-confined effect of the HgS nanoparticles is confirmed by the ultraviolet-visible (UV-vis) and photoluminescence (PL) spectrum. The rescults indicate that the BSA not only induce the nucleation, but inhibit the further growth of HgS nanoparticles. The effect of Hg²⁺ on BSA and the change of BSA conformation were studied through Fourier transform infrared (FTIR) spectroscopy and Circular dichroism (CD) spectroscopy. The possible mechanism of HgS nanoparticles growth in the BSA solution was also discussed.     

Synthesis and optical properties of Cr doped ZnS nanoparticles capped by 2-mercaptoethanol

Nanoparticles of Zn_1−xCr_xS (x=0.00, 0.005, 0.01, 0.02 and 0.03) were prepared by a chemical co-precipitation reaction from homogenous solutions of zinc and chromium salts. These nanoparticles were sterically stabilized using 2-mercaptoethanol. Here a study of the effect of Cr doping on structural, morphological and optical properties of nanoparticles was undertaken. Elemental analysis, morphological, structural and optical properties have been investigated by energy dispersive analysis of X-rays (EDAX), scanning electron microscopy (SEM), X-ray diffraction (XRD), transmission electron microscopy (TEM) and UV-visible spectroscopy .EDAX measurements confirmed the presence of Cr in the ZnS lattice. XRD showed that ZnS:Cr nanoparticles crystallized in zincblende structure with preferential orientation along (1 1 1) plane. The average sizes of the nanoparticles lay in the range of 3-6 nm and lattice parameters were in the range of 5.2-5.4 Å. Lattice contraction was observed with an increase of Cr concentration. The particle size and lattice parameters obtained from TEM and SAED images were in agreement with the XRD results. The absorption edge shifted to lower wavelengths with an increase in Cr concentration as per UV-Vis spectroscopy. The band gap energy values were in the range of 3.85-4.05 eV. This blueshift is attributed to the quantum confinement effect.     

Synthesis of aligned GaN nanorods on Si (111) by molecular beam epitaxy

Straight and well-aligned GaN nanorods have been successfully synthesized by molecular beam epitaxy (MBE) method. The GaN nanorods have been characterized by field-emission scanning electron microscopy (FE-SEM) equipped with energy dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), transmission electron microscopy (TEM) and selected area electron diffraction (SAED). SEM images show that GaN nanorods are constituted with two parts of which shapes are different from each other. The upper part of the nanorod is very thin and its lower part is relatively thick. The XRD and EDS analysis have identified that the nanorods are pure hexagonal GaN with single crystalline wurtzite structure. The TEM images indicate that the nanorods are well crystallized and nearly free from defects. The XRD, HRTEM, and SAED pattern reveal that the growth direction of GaN nanorods is 〈0001〉. The photoluminescence (PL) spectra indicate the good emission property for the nanorods. Finally, we have demonstrated about the two-step growth of the nanorods. PACS 81.07.Bc; 81.05.Ea; 81.15.Hi