Growth of Ni-Al alloys on Ni(1 1 1), from Al deposits of various thicknesses: (II) Formation of NiAl over a Ni3Al interfacial layer

This paper describes the second part of a study devoted to the growth of thin Ni-Al alloys after deposition of Al on Ni(1 1 1). In the previous paper [S. Le Pévédic, D. Schmaus, C. Cohen, Surf. Sci. 600 (2006) 565] we have described the results obtained for ultra-thin Al deposits, leading, after annealing at 750 K, to an epitaxial layer of Ni₃Al(1 1 1). In the present paper we show that this regime is only observed for Al deposits smaller than 8 × 10¹⁵ Al/cm² and we describe the results obtained for Al deposits exceeding this critical thickness, up to 200 × 10¹⁵ Al/cm². Al deposition was performed at low temperature (around 130 K) and the alloying process was followed in situ during subsequent annealing, by Auger electron spectroscopy, low energy electron diffraction and ion beam analysis-channeling measurements, in an ultra-high vacuum chamber connected to a Van de Graaff accelerator. We evidence the formation, after annealing at 750 K, of a crystallographically and chemically well-ordered NiAl(1 1 0) layer (whose thickness depends on the deposited Al amount), over a Ni₃Al “interfacial” layer (whose thickness—about 18 (1 1 1) planes—is independent of the deposited Al amount). The NiAl overlayer is composed of three variants, at 120° from each other in the surface plane, in relation with the respective symmetries of NiAl(1 1 0) and Ni₃Al(1 1 1). The NiAl layer is relaxed (the lattice parameters of cc-B2 NiAl and fcc-L1₂ Ni₃Al differ markedly), and we have determined its epitaxial relationship. In the case of the thickest alloyed layer formed the results concerning the structure of the NiAl layer have been confirmed and refined by ex situ X-ray diffraction and information on its grain size has been obtained by ex situ Atomic Force Microscopy. The kinetics of the alloying process is complex. It corresponds to an heterogeneous growth leading, above the thin Ni₃Al interfacial layer, to a mixture of Al and NiAl over the whole Al film, up to the surface. The atomic diffusion is very limited in the NiAl phase that forms, and thus the progressive enrichment in Ni of the Al film, i.e. of the mean Ni concentration, becomes slower and slower. As a consequence, alloying is observed to take place in a very broad temperature range between 300 K and 700 K. For annealing temperatures above 800 K, the alloyed layer is decomposed, Al atoms diffusing in the bulk of the substrate.     

Growth and oxidation of a Ni3Al alloy on Ni(1 0 0)

The growth and oxidation of a thin film of Ni₃Al grown on Ni(1 0 0) were studied using Auger electron spectroscopy (AES), low energy electron diffraction (LEED), and high resolution electron energy loss spectroscopy (EELS). At 300 K, a 12 Å thick layer of aluminium was deposited on a Ni(1 0 0) surface and subsequently annealed to 1150 K resulting in a thin film of Ni₃Al which grows with the (1 0 0) plane parallel to the (1 0 0) surface of the substrate. Oxidation at 300 K of Ni₃Al/Ni(1 0 0) until saturation leads to the growth of an aluminium oxide layer consisting of different alumina phases. By annealing up to 1000 K, a well ordered film of the Al₂O₃ film is formed which exhibits in the EEL spectra Fuchs-Kliewer phonons at 420, 640 and 880 cm⁻¹. The LEED pattern of the oxide shows a twelvefold ring structure. This LEED pattern is explained by two domains with hexagonal structure which are rotated by 90° with respect to each other. The lattice constant of the hexagonal structure amounts to ∼2.87 Å. The EELS data and the LEED pattern suggest that the γ^′-Al₂O₃ phase is formed which grows with the (1 1 1) plane parallel to the Ni(1 0 0) surface.     

Growth of Co nanoparticles on a nanostructured θ-Al2O3 film on CoAl(1 0 0)

We have investigated the growth of Co nanoparticles on θ-Al₂O₃/CoAl(1 0 0) by means of Auger electron spectroscopy (AES), high-resolution electron energy loss spectroscopy (EELS), low energy electron diffraction (LEED) and scanning tunneling microscopy (STM). Due to Volmer-Weber growth, Co forms particles with a mean diameter of approximately 2.5 nm and height of 0.8 nm. Even on the entirely covered oxide, there is no Ostwald ripening and Co particles stay structurally isolated. The nanoparticles exhibit a small size distribution and tend to form chains, as predetermined by the streak structure of the oxide template. For sufficient high coverages Co-core-CoO-shell nanoparticles may be evidenced, which is explained as a result of surfactant oxygen. The nanostructured particles may open the door to numerous applications, such as in catalysis and magnetoelectronic applications, where large areas of ordered nanodots are desired.     

The CuGaSe2(0 0 1) surface: A (4 × 1) reconstruction

We report on the formation of a stable (4 × 1) reconstruction of the chalcopyrite CuGaSe₂(0 0 1) surface. Using Ar⁺ ion-bombardment and annealing of epitaxial CuGaSe₂ films grown on GaAs(0 0 1) substrates it was possible to obtain flat, well-ordered surfaces showing a clear (4 × 1) reconstruction. The cleanliness and structure were analyzed in situ by AES and LEED. AES data suggest a slight Se-enrichment and Cu-depletion upon surface preparation. Our results demonstrate that (0 0 1) surfaces of the Cu-III-VI₂(0 0 1) material can show stable, unfacetted surfaces.     

Epitaxial C60 thin films on Bi(0 0 0 1)

We have used the Bi(0 0 0 1)/Si(1 1 1) template to grow highly ordered C₆₀ epitaxial thin films and analyzed them using scanning tunneling microscopy and low-energy electron microscopy. The in situ low-energy electron microscope investigations show that the initial nucleation of the C₆₀ islands on the surface takes place at surface defects, such as domain boundaries and multiple steps. The in-plane lattice parameters of this C₆₀ film turns out to be the same as that of the bulk fcc(1 1 1) C₆₀. The line-on-line epitaxial structure is realized in spite of a weak interaction between the C₆₀ molecules and Bi(0 0 0 1) surface, while scanning tunneling spectroscopy indicates that there is a negligible charge transfer between the molecules and the surface.     

Co on thin Al2O3 films grown on Ni3Al(1 0 0)

The growth of Co on thin Al₂O₃ layers on Ni₃Al(1 0 0) was investigated by Auger electron spectroscopy, high resolution electron energy loss spectroscopy (EELS), and scanning tunneling microscopy. At 300 K, Co grows in three-dimensional clusters on top of the Al₂O₃ layer. A defect structure of the alumina layer plays a crucial role during the early stage of Co growth. After deposition of 10 Å of Co, a complete screening of the dipoles of the Al₂O₃ layer due to the Co film is found in the EELS measurements. Annealing the Co film reveals a process of coalescence of Co clusters and, above 700 K, diffusion of the Co atoms through the oxide film into the substrate takes place.     

Initial growth of platinum on oxygen-covered Ni(1 1 0) surfaces

The initial growth of Pt on the Ni(1 1 0)-(3 × 1)-O and NiO(1 1 0) surfaces has been studied by coaxial impact collision ion scattering spectroscopy (CAICISS), low energy electron diffraction (LEED) and X-ray photoelectron spectroscopy (XPS). Prior to Pt deposition, the atomic structure of the near-surface regions of the Ni(1 1 0)-(3 × 1)-O and NiO(1 1 0) structures were studied using CAICISS, finding changes to the interlayer spacings due to the adsorption of oxygen. Deposition of Pt on the Ni(1 1 0)-(3 × 1)-O surface led to a random substitutional alloy in the near-surface region at Pt coverages both below and in excess of 1 ML. In contrast, when the surface was treated with 1800 L of atomic oxygen in order to form a NiO(1 1 0) surface, a thin Pt layer was formed upon room temperature Pt deposition. XPS and LEED data are presented throughout to support the CAICISS observations.     

Adsorption of Pb on NiAl(1 1 0): energetics and structure

The adsorption of Pb onto a NiAl(1 1 0) single crystal surface at 300 K has been studied by Auger electron spectroscopy (AES), Low energy electron diffraction (LEED), molecular beam/surface scattering and single crystal adsorption calorimetry (SCAC). AES indicates a Stranski-Krastanov growth mode, i.e., Pb initially grows on NiAl(1 1 0) two-dimensionally until the first layer completes at 0.89 ML, where a superstructure is observed by LEED, followed by 3D islanding. Measurements of the Pb gas that does not stick indicate that Pb sticks on NiAl(1 1 0) with an initial probability of 0.99. The initial heat of adsorption of Pb on NiAl(1 1 0) is 249 ± 10 kJ/mol. Due to the repulsive interactions between Pb adatoms, the heat of adsorption decreases within the first layer to a value identical to the heat of sublimation of bulk Pb (195 kJ/mol), where it remains at higher coverages. This first application of adsorption calorimetry on such a thick sample (75 μm versus 0.2-8 μm previously) demonstrates that adsorption calorimetry can be extended to a wider range of surfaces, since this thickness can be achieved with nearly any single crystal material by simple mechanical thinning.     

Surface composition and structure of palladium ultra-thin films deposited on Ni(1 1 1)

Ultra-thin palladium films deposited on the Ni(1 1 1) surface were characterized by X-ray photoelectron spectroscopy (XPS), low-energy electron diffraction (LEED) and X-ray photoelectron diffraction (XPD). For low coverage, LEED shows a (1 × 1) pattern similar to that of the substrate. For intermediate coverage, the LEED pattern displays extra spots around the main (1 × 1) spots, resembling a Moiré coincidence pattern, probably associated with the formation of Pd bi-dimensional islands oriented in different directions on the Ni(1 1 1) surface. The results obtained by XPS and XPD corroborate this finding. The LEED pattern displays this structure up to 500 °C. Annealing at 650 °C brings back the (1 × 1) pattern, which is associated with a Pd island coalescence and alloy formation by Pd diffusion in the first atomic layers of the Ni(1 1 1). In this paper we present a detailed study of this surface structure via a comparison between XPD experiment and theory.     

Segregation of Pt at clean surfaces of (Pt, Ni)3Al

Experimental evidence for surface segregation of Pt at (1 1 1) surfaces of ternary (Pt, Ni)₃Al alloys is presented, based upon Auger electron spectroscopy, low energy ion scattering, and angle-resolved X-ray photoelectron spectroscopy. Density functional calculations in the dilute limit confirm that Pt segregation is energetically favored.     

Epitaxial growth of bcc Fe films on Al(1 0 0) surfaces using Ti as an interface stabilizer

An approach is described to promote epitaxial growth of thin metal films on single-crystal metal substrates by stabilizing the interface with an extremely thin metallic interlayer. A single atomic layer of a metal is deposited at the interface, Ti on Al(1 0 0) in this case, prior to the growth of the metal film of interest to produce an epitaxial interface in a system that is otherwise characterized by interdiffusion and disorder. The stabilized interface reduces interdiffusion and serves as a template for ordered film growth. Using Rutherford backscattering and channeling techniques along with low-energy electron diffraction and low-energy He⁺ scattering, it is demonstrated that an atomically thin layer of Ti metal deposited at the Fe-Al interface, a system well known for considerable intermixing at room temperature, reduces interdiffusion and promotes the epitaxial growth of Fe films on the Al(1 0 0) surface. The decrease in ion scattering yield for Al atoms, Fe-Fe shadowing and long-range order of the surface suggest that the epitaxial growth of Fe is greatly improved when the Ti interlayer is introduced prior to Fe deposition. Off-normal ion channeling experiments provide clear evidence for the bcc structure of Fe on the Ti/Al(1 0 0) template with the measured average (1 0 0) interplanar distance of 1.44 Å in the Fe overlayer.     

Alloy formation of Co/Ni/Pt(1 1 1)

The initial growth and alloy formation of ultrathin Co films deposited on 1 ML Ni/Pt(1 1 1) were investigated by Auger electron spectroscopy (AES), low energy electron diffraction (LEED), and ultraviolet photoelectron spectroscopy (UPS). A sequence of samples of d_Co Co/1 ML Ni/Pt(1 1 1) (d_Co = 1, 2, and 3 ML) were prepared at room temperature, and then heated up to investigate the diffusion process. The Co and Ni atoms intermix at lower annealing temperature, and Co-Ni intermixing layer diffuses into the Pt substrate to form Ni-Co-Pt alloys at higher annealing temperature. The diffusion temperatures are Co coverage dependent. The evolution of UPS with annealing temperatures also shows the formation of surface alloys. Some interesting LEED patterns of 1 ML Co/1 ML Ni/Pt(1 1 1) show the formation of ordered alloys at different annealing temperature ranges. Further studies in the Curie temperature and concentration analysis, show that the ordered alloys corresponding to different LEED patterns are Ni_xCo_1−xPt and Ni_xCo_1−xPt₃. The relationship between the interface structure and magnetic properties was investigated.     

Epitaxial growth of ultra-thin NiO films on Cu(1 1 1)

The very first stages of the growth of NiO on Cu(1 1 1) is examined on a microscopic scale. The paper focuses on the morphological and structural characterization of nanostructures formed in the 0-1 Å thickness range. Ultra-thin NiO films, obtained through evaporation of a Ni rod under an oxygen atmosphere were grown at 550 K. In the early stages of the growth the oxide film morphology shows 10-30 nm large, monolayer high, islands with a partial incorporation of metallic Ni in the first Cu(1 1 1) surface plane. The first layer is formed by an epitaxial atomic layer exhibiting a STM contrast similar to the one observed on adsorbed oxygen on Cu(1 1 0). A NiO cluster nucleation and coalescence mechanism is proposed in order to explain the formation of the second NiO layer. A α-Ni₂O₃ hexagonal phase, or a structural distortion of the NiO(1 1 1)()R30° structure could both explain the complex LEED patterns.     

Oxygen-induced nano-faceting of Ir(2 1 0)

The adsorption of oxygen and the nanometer-scale faceting induced by oxygen have been studied on Ir(2 1 0). Oxygen is found to chemisorb dissociatively on Ir(2 1 0) at room temperature. The molecular desorption process is complex, as revealed by a detailed kinetic analysis of desorption spectra. Pyramid-shaped facets with {3 1 1} and (1 1 0) orientations are formed on the oxygen-covered Ir(2 1 0) surface when annealed to T?600 K. The surface remains faceted for substrate temperatures T<850 K. For T>850 K, the substrate structure reverts to the oxygen-covered (2 1 0) planar state and does so reversibly, provided that oxygen is not lost due to desorption or via chemical reactions upon which the planar (2 1 0) structure remains. A clean faceted surface was prepared through the use of low temperature surface cleaning methods: using CO oxidation, or reaction of H₂ to form H₂O, oxygen can be removed from the surface while preserving (“freezing”) the faceted structure. The resulting clean faceted surface remains stable for T<600 K. For temperatures above this value, the surface irreversibly relaxes to the planar state.     

Elemental steps in the growth of thin β-Ga2O3 films on CoGa(1 0 0)

The oxidation of CoGa(1 0 0) at 700 K was studied by means of high resolution electron energy loss spectroscopy (EELS), scanning tunneling microscopy, low energy electron diffraction and Auger electron spectroscopy (AES). At 700 K, thin well-ordered β-Ga₂O₃ films grow on CoGa(1 0 0). The EEL spectrum of the Ga-oxide films exhibit Fuchs–Kliewer phonons at 305, 455, 645, and 785 cm⁻¹. For low oxygen exposure (<0.2 L), the growth of oxide-islands starts at step edges and on defects. The oxide films have the shape of long, rectangular islands and are oriented in the [1 0 0] and [0 1 0] directions of the substrate. For higher oxygen exposure, islands of β-Ga₂O₃ are found also on the terraces. After an exposure of 200 L O₂ at 700 K, the CoGa(1 0 0) surface is homogeneously covered with a thin film of β-Ga₂O₃.     

Growth and alloy formation of ultrathin Ni films on Co/Pt(1 1 1)

Low-energy electron diffraction (LEED) and Auger electron spectroscopy (AES) were used to study the growth and the structural evolution of Ni/Co/Pt(1 1 1) following high-temperature annealing. From the oscillation of the specular beam of the LEED and Auger uptake curve, we concluded that the growth mode of thin Ni films on 1 ML Co/Pt(1 1 1) is at least 2 ML layer-by-layer growth before three-dimensional island growth begins. The alloy formation of Ni/1 ML Co/Pt(1 1 1) was analyzed by AES. The temperature for the intermixing of Ni and Co layers in the upper interface without diffusing into the bulk of Pt is independent of the thickness of Ni when a Co buffer is one atomic monolayer. After the temperature was increased, formations of Ni-Co-Pt alloy, Ni-Pt alloy and Co-Pt alloy were observed. The temperature required for the Ni-Co intermixing layer to diffuse into Pt bulk increases with the thickness of Ni. The interlayer distance as a function of annealing temperature for 1 ML Ni/1 ML Co/Pt(1 1 1) was calculated from the I-V LEED. The evolution of LEED patterns was also observed at different annealing temperatures.     

Holographic diffuse LEED image reconstruction for simultaneous occupation of different oxygen adsorption sites on Ni(1 1 1)

We determined the local adsorption structure of disordered oxygen on the Ni(1 1 1) surface by means of diffuse holographic LEED. The measurements have been performed above the critical temperature (T_c=450 K) for the oxygen order-disorder phase transition at 500 K and at a coverage of Θ=0.25 ML. At this temperature we found, in agreement with a previous LEED-IV-analysis [Surf. Sci. 349 (1996) 185], that besides the fcc threefold sites also hcp sites are occupied. In addition, a small amount seems to be located also at top and bridge sites. Reconstructing the holographic wavefield information, the different oxygen adsorption geometries are superimposed in the real space image. Nevertheless, a spatial resolution of 0.5-1 Å was sufficient to clearly distinguish between them. The influence of algorithmic parameters on the image quality was tested.     

Growth of Ce on Rh(1 1 1)

We have studied the growth of cerium films on Rh(1 1 1) using STM (scanning tunneling microscopy), LEED (low energy electron diffraction), XPS (X-ray photoelectron spectroscopy) and AES (Auger electron spectroscopy). Measurements of the Ce films after room temperature deposition showed that Ce is initially forming nanoclusters in the low coverage regime. These clusters consist of 12 Ce atoms and have the shape of pinwheels. At a coverage of 0.25 ML (monolayer, ML) an adatom layer with a (2 × 2) superstructure is observed. Above 0.4 ML, Rh is diffusing through pinholes into the film, forming an unstructured mixed layer. Annealing at 250 °C leads to the formation of ordered Ce-Rh compounds based on the bulk compound CeRh₃. At a coverage of 0.1 ML, small ordered (2 × 2) surface alloy domains are observed. The exchanged Rh atoms form additional alloy islands situated on the pure Rh(1 1 1) surface, showing the same (2 × 2) superstructure as the surface alloy. At a coverage of 0.25 ML, the surface is completely covered by the surface alloy and alloy islands. The (2 × 2) structure is equivalent to a (1 1 1)-plane of CeRh₃, contracted by 6%. Annealing a 1 ML thick Ce layer leads to a flat surface consisting of different rotational domains of CeRh₃(1 0 0). The Rh needed for alloy formation comes from 50 Å deep pits in the substrate. Finally we show that LEIS (low energy ion scattering) is not suitable for the characterization of Ce and CeRh films due to strong effects of neutralization.     

Epitaxial growth of MnO/Ag(0 0 1) films

Among the 3d transition metal monoxides, MnO plays a particular role due to the high spin ground state of the 3d⁵ configuration of Mn²⁺. Therefore, MnO could be an excellent model system to investigate many kinds of spin dependent or magnetic interactions between electrons in the surface of an antiferromagnetic solid. But in practice, most experimental investigations on crystalline MnO(0 0 1) surfaces suffer from the bad structural quality of the surface of cleaved bulk crystals. In this paper, we report on the epitaxial growth of MnO/Ag(0 0 1) surfaces, which is proved to be a method to produce crystalline MnO(0 0 1) surfaces of high structural order.     

Formation of oxygen-induced Si(1 1 3)-3 × 2 facets on the Si(5 5 12) surface

We report the formation of Si(1 1 3)-3 × 2 facets upon exposing oxygens on the Si(5 5 12) surface at an elevated temperature. These facets are found to form only for a limited range of oxygen exposure and exhibit a well-defined 3 × 2 LEED pattern. We also find the surface electronic state unique only to the facets in the valence band. The spectral feature of these electronic states and the behavior of a (1/3 1/2) LEED spot upon oxygen contents in the facets indicate that the formation is a heterogeneous mixture of the clean Si(1 1 3) facets free of oxygens and other facets containing oxygen atoms.