A quantum-mechanical study of the vinyl fluoride adsorbed on the rutile TiO2(1 1 0) surface

The adsorption of vinyl fluoride on the rutile TiO₂(1 1 0) surface has been simulated, on the basis of a recently proposed experimental model, using hybrid-exchange density functional theory. Different surface coverages have been considered and the lateral interaction between adsorbed vinyl fluoride molecules has been quantified through a simple model of nearest and next nearest neighbouring molecules. The vibrational frequencies of the adsorbed molecule have been calculated and are found to be in excellent agreement with those observed providing support for the proposed adsorption model. The effect of the adsorption on the electronic structure of the molecule and the surface have been characterised by computing electrostatic potential maps and the local density of states.     

RAIRS investigations on the orientation and intermolecular interactions of adenine on Cu(1 1 0)

The adsorption of the DNA base adenine (C₅N₅H₅) on Cu(1 1 0) has been investigated as a function of coverage and temperature using reflection absorption infrared spectroscopy. These data provide important information on the nature of the local adsorbed complex and the intermolecular lateral interactions that come into play at high coverages. The RAIR spectra are consistent with an adsorption geometry in which the molecular ring is substantially tilted from the surface plane and in which the two amino hydrogens are equidistant from the surface, thus rationalising the appearance of a very strong βNH₂ scissoring mode, along with the activity of in-plane vibrational modes and the observation of the symmetric ν_symNH₂ stretch, but not the asymmetric ν_asymNH₂ stretch. In addition, coordination to the metal surface is proposed to occur at the N(9) position with a possible additional interaction through the N(3) position, both of which are the favoured coordination points in the metal complexes of adenine. This is a strong interaction and leads to a highly stable adsorbed layer. Our data also provide the first direct evidence of hydrogen bonding in the adlayer as coverage is increased, attributed to interactions between the amino group of one molecule and the N(1) and N(7) positions of a neighbouring species. When adsorption is carried out at room temperature, a very heterogeneous adlayer is created in which a diversity of molecular aggregates co-exist. However, upon annealing, a more ordered hydrogen bonded adlayer is formed in which one type of hydrogen bonding assembly is preferred. Finally, we propose that the hydrogen bonded assemblies created at a surface probably involve bent hydrogen bonds which arise from a compromise between the strong molecule-metal interactions that orientate the molecule and weaker lateral hydrogen bonding interactions that dictate the two-dimensional architecture.     

RAIRS studies of CO adsorption on Pd/CeO2−x(1 1 1)/Pt(1 1 1)

Reflection absorption infrared spectroscopy (RAIRS) has been used to investigate the adsorption of CO on CeO_2−x-supported Pd nanoparticles at room temperature. The results show that when CeO_2−x is initially grown on Pt(1 1 1), a small proportion of the surface remains as bare Pt sites. However, when Pd is deposited onto CeO_2−x/Pt(1 1 1), most of the Pd grows directly on top of the CeO_2−x(1 1 1). RAIR spectra of CO adsorption on 1 ML Pd/CeO_2−x/Pt(1 1 1) show a broad CO-Pd band, which is inconsistent with a single crystal Pd surface. However, the 5 ML and 10 ML Pd/CeO_2−x/Pt(1 1 1) spectra show vibrational bands consistent with the presence of Pd(1 1 1) and (1 0 0) faces, suggesting the growth of Pd nanostructures with well defined facets.     

Adsorption, ordering, and chemistry of nitrobenzene on Si(1 0 0)-2 × 1

Surface chemistry of nitrobenzene on Si(1 0 0)-2 × 1 has been investigated using multiple internal reflection Fourier-transform infrared spectroscopy (MIR-FTIR), Auger electron spectroscopy (AES) and thermal desorption mass spectrometry. Molecular adsorption of nitrobenzene at submonolayer coverages is dominating at cryogenic temperatures (100 K). As the surface temperature is increased to 160 K, chemical reaction involving nitro group occurs, while the phenyl entity remains intact. Thus, a barrier of approximately 40.8 kJ/mol is established for the interaction of the nitro group of nitrobenzene with the Si(1 0 0)-2 × 1 surface. Further annealing of the silicon surface leads to the decomposition of nitrobenzene. The concentration of nitrogen and oxygen remains constant on a surface within the temperature interval studied here. AES studies also suggest that the majority of carbon-containing products remain bound to the surface at temperatures as high as 1000 K. The only chemical reaction leading to the release of the gaseous products is benzene formation around 670 K. The amount of benzene accounts only for a few percent of the surface species, while the rest of the phenyl groups connected to the silicon surface via a nitrogen linker remain stable even at elevated temperatures, opening an opportunity for stable surface coatings.     

Structures and stability of Ag clusters on Ag(1 1 1) and Ni(1 1 1) surfaces

The structures of the lowest total energy for small Ag_N clusters with N = 2-20, which are grown on Ag(1 1 1) and Ni(1 1 1) surfaces, have been determined using a combination of the embedded-atom method and the basin-hopping algorithm. It is found that the particularly stable Ag clusters with N<18 have similar geometries on both surfaces when comparing clusters of the same size. On the other hand, the geometries of the less stable Ag clusters in the same size range differ for the two surfaces. From N?18, the sizes of the particularly stable structures are different for the two different substrates. Due to the large size mismatch of the two types of atoms it is energetically unfavorable for Ag to form a pseudomorphic monolayer structures on Ni(1 1 1) and there is considerable strain produced at the interface. The effect of this strain and the increased adatom-substrate interactions lead to irregular and elongated structures of the adsorbed Ag clusters.     

An effective Hamiltonian for sulfur adsorption at Au(1 0 0) surface

Adsorption of sulfur at the (1 0 0) surface of gold is analyzed with the help of the density functional theory (DFT). Potential energy surface for a single S atom at the Au(1 0 0) surface is computed and a simple analytical formula was found to reproduce the ab initio results to a good accuracy. Vibration frequencies of the adsorbed S atom are computed using the harmonic approximation and the contribution of zero-point motion to the adsorption energy is evaluated. The effects of surface Au atoms relaxation in the sulfur adsorption is analyzed. The interactions between S atoms adsorbed at the nearest and the next nearest equivalent adsorption sites are computed and used to define the effective Hamiltonian describing the interactions between the adsorbed sulfur atoms.     

The formation of sharp NiO(1 0 0)-cobalt interfaces

An atomically sharp interface between an antiferromagnetic oxide and a ferromagnetic metal may be obtained by the deposition of an epitaxial oxide buffer nanolayer in between. The buffer layer consists of the oxide of the ferromagnetic metal. The concept has been demonstrated on the NiO(1 0 0)-Co system, where the inclusion of a 1-2 ML CoO(1 0 0) interlayer inhibits the interfacial redox reaction which takes place between NiO and Co metal in the absence of the buffer layer.     

Ethylene hydrogenation on Ni(1 0 0) surface

The hydrogenation of ethylene on Ni(1 0 0) surface has been studied by TDS. The decrease in the bonding energy with increasing coverage is revealed for both of adsorbed hydrogen and ethylene by the shift of desorption to lower temperatures. Ethane formation is only observed on the preadsorbed hydrogen coverage exceeding 0.5 monolayer (ML), coupled with the growth of H₂ shoulder peak at lower temperatures. Further increase of H coverage to saturation reduces the bonding energy of subsequently adsorbed ethylene by 15 kJ/mol and decreases the saturation coverage of ethylene to about one-third on the clean surface. This leads to the shift of ethane desorption from 250 to 220 K and an appearance of additional ethane peak at 180 K. The latter ethane formation coincides with the hydrogenation of surface ethyl species derived from ethyl iodide as a precursor. It indicates that the rate of ethyl formation on the surface would be comparable to that of subsequent hydrogen addition to the surface ethyl species in the hydrogenation of ethylene when the preadsorbed hydrogen coverage approaches 1.0 ML.     

Molecular dynamics investigation on the atomic-scale friction behaviors between copper(0 0 1) and diamond(1 1 1) surfaces

Classical molecular dynamics (MD) simulations are conducted to examine the atomic-scale friction behavior of an infinite flat-flat contact between copper(0 0 1) and diamond(1 1 1) surfaces. Two types of diamond surface, namely H-free and hydrogenated, are constructed and on each of them the copper counterface is brought to slide along the [1 1 −2] and [1 −1 0] crystallographic directions with a variety of loads. The simulation results demonstrate that the hydrogen atoms chemisorbed to the diamond surface can to large extent eliminate the directional dependency of its friction behavior with copper. Under pressures less than 30 GPa, the sliding between copper and hydrogenated is wearless. In this period, the shear stress of them just slightly increases to 0.6 GPa. Between 30 GPa and 32 GPa, copper atoms near the interface begin to be worn and incorporate into the diamond substrate and this causes a sharp shift from 0.6 GPa to 2.7 GPa in their shear stress. In contrast, the sliding process between copper and H-free diamond is always wearless even under pressure beyond 40 GPa. The H-free [1 −1 0] model exhibits much higher shear stress than H-free [1 1 −2] under pressures less than 35 GPa. Beyond 35 GPa, they present nearly consistent shear stress evolution. Moreover, the simulations for hydrogenated diamond models suggest that their friction behavior is independent on sliding velocity only under wearless sliding regime.     

Probing the properties of the (1 1 1) and (1 0 0) surfaces of LaB6 through infrared spectroscopy of adsorbed CO

The adsorption of carbon monoxide on the LaB₆(1 0 0) and LaB₆(1 1 1) surfaces was studied experimentally with the techniques of reflection absorption infrared spectroscopy and X-ray photoelectron spectroscopy. The interaction of CO with the two surfaces was also studied with density functional theory. Both surfaces adsorb CO molecularly at low temperatures but in markedly different forms. On the LaB₆(1 1 1) surface CO initially adsorbs at 90 K in a form that yields a CO stretching mode at 1502-1512 cm⁻¹. With gentle annealing to 120 K, the CO switches to a bonding environment characterized by multiple CO stretch values from 1980 to 2080 cm⁻¹, assigned to one, two, or three CO molecules terminally bonded to the B atoms of a triangular B₃ unit at the (1 1 1) surface. In contrast, on the LaB₆(1 0 0) surface only a single CO stretch is observed at 2094 cm⁻¹, which is assigned to an atop CO molecule bonded to a La atom. The maximum intensity of the CO stretch vibration on the (1 0 0) surface is higher than on the (1 1 1) surface by a factor of 5. This difference is related to the different orientations of the CO molecules on the two surfaces and to reduced screening of the CO dynamic dipole moment on the (1 0 0) surface, where the bonding occurs further from the surface plane. On LaB₆(1 0 0), XPS measurements indicate that CO dissociates on the surface at temperatures above 400 K.     

Reactivity of 3-hexyne on oxygen modified Ru(0 0 1) surfaces: Observation of oxametallacycles by RAIRS

The chemical behaviour of 3-hexyne on oxygen modified Ru(0 0 1) surfaces has been analysed under ultrahigh-vacuum, using reflection-absorption infrared spectroscopy (RAIRS). The effects of oxygen coverage, 3-hexyne exposure and adsorption temperature were studied. Two modified Ru(0 0 1) surfaces were prepared: Ru(0 0 1)-(2 × 2)-O and Ru(0 0 1)-(2 × 1)-O that correspond to oxygen coverages (θ_O) of 0.25 and 0.5 ML, respectively. The striking result is the direct bonding to an O atom when the modified surfaces are exposed to a very low dose (0.2 L) of 3-hexyne at low temperature (100 K). For θ_O = 0.25 ML, an unsaturated oxametallacycle [Ru-O-C(C₂H₅)C(C₂H₅)-Ru] is proposed, identified by RAIRS for the first time, through the νCC and νCO modes. Further decomposition at 110 K yields smaller oxygenated intermediates, such as acetyl [μ₃-η²(C,O)-CH₃CO], co-adsorbed with a small amount of carbon monoxide and non-dissociated species. The temperature at which a fraction of molecules undergoes complete C-C and C-H bond breaking is thus much lower than on clean Ru(0 0 1). The ultimate decomposition product observed by RAIRS at 220 K is methylidyne [CH]. Another key observation was that the adsorption temperature is not determinant of the reaction route, contrarily to what occurs on clean Ru(0 0 1): even when 3- hexyne strikes the surface at a rather high temperature (220 K), the multiple bond does not break completely. For θ_O = 0.5 ML, a saturated oxametallacycle [Ru-O-CH(C₂H₅)-CH(C₂H₅)-Ru] is also proposed at 100 K, identified by the ν_asO-C-C (at 1043 cm⁻¹) and ν_sO-C-C (at 897 cm⁻¹) modes, showing that some decomposition with C-H bond breaking occurs. For this oxygen coverage, the reaction temperatures are lower, and the intermediate surface species are less stable.     

Surface and subsurface oxide formation on Ni(1 0 0) and Ni(1 1 1)

The oxidation of Ni(1 0 0) and Ni(1 1 1) at elevated temperatures and large oxygen exposures, typical of the methods used in the preparation of NiO(1 0 0) films for surface studies, has been investigated by medium energy ion scattering (MEIS) using 100 keV H⁺ incident ions. Oxide film growth proceeds significantly faster on Ni(1 1 1) than on Ni(1 0 0), but on both surfaces oxide penetration occurs to depths significantly greater than 100 Å with total exposures of 1200 and 6000 L respectively. The metal/oxide interface is extremely rough, with metallic Ni extending to the surface, even for much thicker oxide films on Ni(1 1 1). On Ni(1 1 1), NiO growth occurs with the (1 0 0) face parallel to the Ni(1 1 1) surface and the close-packed 〈1 1 0〉 directions parallel. On Ni(1 0 0) the MEIS blocking curves cannot be reconciled with a single orientation of NiO(1 0 0) (with the 〈1 1 0〉 directions parallel) on the surface, but is consistent with the substantial orientational disorder (including tilt) previously identified by spot-profile analysis LEED.     

Novel mesoscale defect structure on NiO(1 0 0) surfaces by atomic force microscopy

Cleaved NiO(1 0 0) surfaces were imaged with atomic force microscopy (AFM) to determine defect concentrations and morphology. Random 〈0 1 0〉 and 〈0 0 1〉 oriented steps, which have been previously characterized, were the most common defect observed on the cleaved surface and formed with step heights in multiples of 2.1 Å, the Ni-O nearest-neighbor distance, and terrace widths in the range of 25-100 nm. In addition, the surface showed novel mesoscale (∼0.5-2 μm) square pyramidal defects with the pyramid base oriented along 〈1 0 0〉 symmetry related directions. Upon etching, the pyramidal defects converted to more stable cubic pits, consistent with (1 0 0) symmetry related walls. The square pyramidal pits tended to cluster or to form along step edges, where the weakened structure is more susceptible to surface deformations. Also, a small concentration of square pyramidal pits, oriented with the base of the pyramid along 〈0 1 1〉, was observed on the cleaved NiO surfaces. For comparison purposes, chemical mechanical polished (CMP) NiO(1 0 0) substrates were imaged with AFM. Defect concentrations were of comparable levels to the cleaved surface, but showed a different distribution of defect types. Long-ranged stepped defects were much less common on CMP substrates, and the predominant defects observed were cubic pits with sidewalls steeper than could be accurately measured by the AFM tip. These defects were similar in size and structure to those observed on cleaved NiO(1 0 0) surfaces that had been acid etched, although pit clustering was more pronounced for the CMP surfaces.     

Density functional and dynamics study of the dissociative adsorption of hydrogen on Mg (0 0 0 1) surface

A first principles study is performed to investigate the adsorption characteristics of hydrogen on magnesium surface. Substitutional and on-surface adsorption energies are calculated for Mg (0 0 0 1) surface alloyed with the selected elements. To further analyze the hydrogen-magnesium interaction, first principles molecular dynamics method is used which simulates the behavior of H₂ at the surface. Also, charge density differences of substitutionally doped surface configurations were illustrated. Accordingly, Mo and Ni are among the elements yielding lower adsorption energies, which are found to be −9.2626 and −5.2995 eV for substitutionally alloyed surfaces, respectively. In light of the dynamic calculations, Co as an alloying element is found to have a splitting effect on H₂ in 50 fs, where the first hydrogen atom is taken inside the Mg substrate right after the decomposition and the other after 1300 fs. An interesting remark is that, elements which acquire higher chances of adsorption are also seen to be competent at dissociating the hydrogen molecule. Furthermore, charge density distributions support the results of molecular dynamics simulations, by verifying the distinguished effects of most of the 3d and 4d transition metals.     

Growth mode and electronic structure of Au nano-clusters on NiO(0 0 1) and TiO2(1 1 0)

The growth mode and electronic structure of Au nano-clusters grown on NiO and TiO₂ were analyzed by reflection high-energy electron diffraction, a field-emission type scanning electron microscope, medium energy ion scattering and photoelectron spectroscopy. Au was deposited on clean NiO(0 0 1)-1 × 1 and TiO₂(1 1 0)-1 × 1 surfaces at room temperature with a Knudsen cell at a rate of 0.25-0.35 ML/min (1 ML = 1.39 × 10¹⁵ atoms/cm²:Au(1 1 1)). Initially two-dimensional (2D) islands with thickness of one Au-atom layer grow epitaxially on NiO(0 0 1) and then neighboring 2D-islands link each other to form three-dimensional (3D)-islands with the c-axis oriented to the [1 1 1] direction. The critical size to form 3D-islands is estimated to be about 5 nm². The shape of the 3D-islands is well approximated by a partial sphere with a diameter d and height h ranging from 2.0 to 11.8 nm and from 0.95 to 4.2 nm, respectively for Au coverage from 0.13 to 4.6 ML. The valence band spectra show that the Au/NiO and Au/TiO₂ surfaces have metallic characters for Au coverage above 0.9 ML. We observed Au 4f spectra and found no binding energy shift for Au/NiO but significant higher binding energy shifts for Au/TiO₂ due to an electron charge transfer from Au to TiO₂. The work function of Au/NiO(0 0 1) gradually increases with increase in Au coverage from 4.4 eV (NiO(0 0 1)) to 5.36 eV (Au(1 1 1)). In contrast, a small Au deposition(0.15 to 1.5 ML) on TiO₂(1 1 0) leads to reduction of the work function, which is correlated with an electron charge transfer from Au to TiO₂ substrate.     

Self-diffusion dynamic behavior of atomic clusters on Re(0 0 0 1) surface

Using molecular dynamics simulations and a modified analytic embedded atom potential, the self-diffusion dynamics of rhenium atomic clusters up to seven atoms on Re(0 0 0 1) surface have been studied in the temperature ranges from 600 K to 1900 K. The simulation time varies from 20 ns to 200 ns according to the cluster sizes and the temperature. The heptamer and trimer are more stable comparing to other neighboring non-compact clusters. The diffusion coefficients of clusters are derived from the mean square displacement of cluster's mass-center, and diffusion prefactors D₀ and activation energies E_a are derived from the Arrhenius relation. It is found that the Arrhenius relation of the adatom can be divided into two parts at different temperature range. The activation energy of clusters increases with the increasing of the atom number in clusters. The prefactor of the heptamer is 2-3 orders of magnitude higher than a usual prefactor because of a large number of nonequivalent diffusion processes. The trimer and heptamer are the nuclei at different temperature range according to the nucleation theory.     

First-principles studies on initial growth of Ni on MgO(0 0 1) surface

To elucidate the initial growth of metal on oxide surface, we studied adsorption of small nickel clusters, Ni_n (n = 1-5), on MgO(0 0 1) surface using first-principles method based on density-functional theory. It was found that the preferential adsorption site for an isolated Ni atom is directly above the surface oxygen atom. A strong covalent bond with partial ionic character is formed between the Ni adatom and the surface oxygen atom. Various structures were considered for the Ni_n isomers and 3D structures were found to be energetically more stable than 2D structures for clusters of more than two atoms. For the 2D clusters, metal-metal bonds prevail over metal-substrate bonds with increasing Ni coverage. The calculated work function and ionization energy were found to vary with Ni coverage which is attributed to the change of the surface dipole moment upon metal adsorption, while the evolution of Schottky barrier height at the initial growth stage is dominated by the adatom-induced gap states.     

Anharmonicity in Al vicinal surfaces of (1 0 0) with (1 1 1) step

Molecular dynamics simulations incorporating an analytic embedded atom potential have been used to investigate the atomic structure and surface order of the Al vicinal surfaces for the temperature up to 900 K. The relaxation, mean square vibrational amplitude, and structure factor as a function of temperature, and of the terrace width for the p(1 0 0) × (1 1 1) surfaces (2 ≤ p ≤ 10) are discussed. The obtained structure factor indicates that the anharmonic effect reduces with increasing terrace widths. The decrease of surface energy with increasing terrace width also supports this conclusion.     

Laser-induced vibrational excitation and desorption in the Cs/Cu(1 1 1) and Na/Cu(1 1 1) systems

The Cs/Cu(1 1 1) and Na/Cu(1 1 1) systems exhibit a transient excited electronic state localized on the adsorbate. Photo-excitation of this state triggers a motion of the alkali adsorbate away from the surface, leading to vibrational excitation of the adsorbate and possibly to desorption. A theoretical study of these photo-induced processes in the case of an exciting fs laser pulse is reported, based on a time-dependent approach of the adsorbate motion. The mean energy transfer from the laser photon energy to the adsorbate motion is shown to be weak, about 1% of the photon energy. Correspondingly, the vibrational excitation to high lying levels is very weak as well as the desorption process. The initial electronic state of the photo-induced process belongs to a continuum and vibrational excitation and desorption are found to vary rapidly with the energy of the initial electronic state. Initial vibrational excitation of the alkali adsorbate is also found to efficiently favour the desorption process, leading to a drastic variation of the desorption probability with the vibrational temperature of the adsorbate. The present results for the two systems are discussed and compared, in connection with available experimental data on these systems and on similar ones.