Vibrational entropy-driven dealloying of Mo(1 0 0) and W(1 0 0) surface alloys

The formation and stability of Cu, Ag and Au-induced c(2 × 2) alloys at the Mo(1 0 0) and W(1 0 0) surfaces have been investigated with low-energy electron microscopy and diffraction. The ordered alloys transform to disordered overlayer structures at elevated temperature. Comparison of the transformation temperatures with energetics obtained from first principles calculations reveals the vibrational entropic contribution to the system free energy that defines alloy thermal stability. Effective Debye temperatures for metal adatoms are determined that exhibit the expected mass and bond strength dependence.     

Self-organized Fe nanostructures on W(1 1 0)

The magnetic domain structure of Fe wires, ribbons and islands with different shapes that have been prepared under ultra high vacuum conditions on W(1 1 0) are studied with spin polarized low energy electron microscopy. The dimensions of the nanostructures, which are of the order of tens and hundreds of nm, can be controlled by the temperature at which they are produced, by the average Fe coverage and by the substrate morphology. The domain structure of the nanostructures depends on their shape and is determined by the competition between magnetoelastic, shape and magnetocrystalline anisotropies.     

Kinetic length and step permeability on the Si(1 1 1) (1 × 1) surface

Information on the kinetic regime of step motion and step permeability on the Si(1 1 1) (1 × 1) surface has been obtained from observations of island decay that were made with low energy electron microscopy. Island area during decay exhibits the expected power law dependence on time, with exponent, α, that is a qualitative indicator of the kinetic regime. A new method is presented for determining the kinetic length quantitatively from measurements of the decay exponent in the symmetric island decay geometry on top of a larger concentric circular island. Using this approach, we determine the kinetic length on the Si(1 1 1) (1 × 1) surface at 1163 K to be d ∼ 75a, where a is the lattice constant. It is shown that this result locates step motion firmly in the diffusion limited regime. Mass conservation of decaying island stacks is also observed at this temperature, which indicates that steps are effectively impermeable in the context of diffusion limited step kinetics.     

Structure analysis of W(0 0 1)2 × 1-O surface at room and liquid nitrogen temperatures

Surface structure of O-adsorbed W(0 0 1) surface after annealing to 1200 K has been analyzed by low energy electron diffraction at 77 K as well as at room temperature. The optimum structure has tungsten missing rows and oxygen double rows. Furthermore, the R-factor is minimized at the structure that O atoms are adsorbed on one of the two different threefold hollow sites of the (1 1 0) facet appearing on the W(0 0 1)2 × 1 with missing row. However, the results suggest that two domains of O atoms adsorbed on both the two different threefold hollow sites coexist. Then, I-V curves have been analyzed as a function of the mixing ratio of the two domains having different O adsorption sites at room and low temperatures. The energy difference between these two sites has been estimated to be 6.5 meV from the temperature dependence of the mixing ratio.     

Growth and oxidation of a Ni3Al alloy on Ni(1 0 0)

The growth and oxidation of a thin film of Ni₃Al grown on Ni(1 0 0) were studied using Auger electron spectroscopy (AES), low energy electron diffraction (LEED), and high resolution electron energy loss spectroscopy (EELS). At 300 K, a 12 Å thick layer of aluminium was deposited on a Ni(1 0 0) surface and subsequently annealed to 1150 K resulting in a thin film of Ni₃Al which grows with the (1 0 0) plane parallel to the (1 0 0) surface of the substrate. Oxidation at 300 K of Ni₃Al/Ni(1 0 0) until saturation leads to the growth of an aluminium oxide layer consisting of different alumina phases. By annealing up to 1000 K, a well ordered film of the Al₂O₃ film is formed which exhibits in the EEL spectra Fuchs-Kliewer phonons at 420, 640 and 880 cm⁻¹. The LEED pattern of the oxide shows a twelvefold ring structure. This LEED pattern is explained by two domains with hexagonal structure which are rotated by 90° with respect to each other. The lattice constant of the hexagonal structure amounts to ∼2.87 Å. The EELS data and the LEED pattern suggest that the γ^′-Al₂O₃ phase is formed which grows with the (1 1 1) plane parallel to the Ni(1 0 0) surface.     

Novel structural phases of Dy thin films on W(1 1 2)

Thin films of the rare-earth metal Dy were grown on W(1 1 2) at room temperature and 570 K. Then the resultant film morphologies were characterised by LEED and STM. A series of novel film morphologies, including c(4 × 6), c(5 × 12) and (5 × 8) structures, were found that are unique among the rare-earth metals. High thermal stability was found for the Dy films (up to 1650 K, close to the melting point at 1685 K) such that the Dy atoms preserved an ordered structure and the Dy volatility was less than would be expected from its vapour pressure. This is an indication of strong electronic interactions between the Dy atoms and the W(1 1 2) substrate.     

Ultra-thin film growth of titanium dioxide on W(1 0 0)

We have employed low energy electron diffraction (LEED) and X-ray photoelectron spectroscopy to follow the epitaxial growth of thin films of TiO₂ on W(1 0 0). The films were grown both by metal vapour deposition of titanium onto the substrate in UHV with subsequent annealing in a low partial pressure of oxygen, and by metal vapour deposition in a low partial pressure of oxygen. LEED patterns showed the characteristic patterns of (1 1 0) oriented rutile. A systematic spot splitting was observed and attributed to a stepped surface. The calculated step height was found to be in good agreement with that expected for rutile TiO₂(1 1 0), 3.3 Å. Titanium core level shifts were used to identify oxidation states as a function of film thickness allowing the interpretation in terms of a slightly sub-stoichiometric interface layer in contact with the substrate. In combination with the LEED patterns, the film structure is therefore determined to be (1 1 0) oriented rutile with a comparable level of stoichiometry to UHV prepared bulk crystals. The ordered step structure indicates considerable structural complexity of the surface.     

Growth of Cr on Ir(1 1 1) studied by scanning tunneling microscopy

We have studied the room-temperature growth of Cr on Ir(1 1 1) by scanning tunneling microscopy. Even in the low-coverage regime, up to a total coverage of 2 monolayers (ML), Cr does not grow in the layer-by-layer mode. Instead, we observe islands with local coverages Θ between 1 ML and 5 ML. While the 1st layer growth is pseudomorphic, sporadic defect lines are observed in the 2nd layer. For Θ ? 3 ML periodic one-dimensional dislocation lines appear indicating the onset of strain relief. Scanning tunneling spectroscopy reveals that islands with Θ = 1 ML exist in two modifications. Though their tunneling spectra are qualitatively rather similar, direct comparison shows that the main peak is shifted by about 15 mV, resulting in peak positions of −0.255 V and −0.270 V. We interpret these two modifications as regular fcc Cr and Cr which exhibits a faulted hcp stacking on Ir(1 1 1), respectively. The assignment of fcc to areas directly attached to substrate steps together with the evolution of the ratio of the different ML-areas with coverage leads to the conclusion that hcp is the more favorable stacking.     

Surface mass diffusion and step stiffness on an anisotropic surface; Mo(0 1 1)

Results of step fluctuation experiments for Mo(0 1 1), using low-energy electron microscopy, are re-examined using recently developed procedures that offer accurate coefficients of surface mass diffusion. By these means, surface diffusion D_s is documented at T/T_m ∼ 0.5, while the crossover to relaxation driven by bulk vacancy diffusion is inferred for T/T_m ∼ 0.6. Here, T_m is the melting temperature T_m = 2896 K. We obtain D_s = 4 × 10⁻⁴ exp(−1.13 eV/k_BT) cm²/s for the temperature interval 1080-1680 K. Possible indications of diffusion along step edges appear for T/T_m ∼ 0.4. The same measurements of step fluctuation amplitudes determine also the step stiffness, which by symmetry is anisotropic on Mo(0 1 1). It is shown that three independent procedures yield mutually consistent step stiffness anisotropies. These are (1) step fluctuation amplitudes; (2) step relaxation rate anisotropies; and (3) the observed anisotropies of islands in equilibrium on the Mo(0 1 1) surface. The magnitude of the step stiffness obtained from step edge relaxation is consistent with earlier measurements that determine diffusion from grain boundary grooving.     

Step flow observed on top of oxidized CoAl(1 0 0) surface

Clean and oxidized surfaces of CoAl(1 0 0) were investigated by Auger electron spectroscopy (AES), low energy electron diffraction (LEED), high resolution electron energy loss spectroscopy (HREELS), and scanning tunnelling microscopy (STM). The regrowth or step flow of terraces was observed at 1150 K. The correlation between the growth of oxide and the step flow on the CoAl(1 0 0) surface is discussed in this paper.     

Epitaxial C60 thin films on Bi(0 0 0 1)

We have used the Bi(0 0 0 1)/Si(1 1 1) template to grow highly ordered C₆₀ epitaxial thin films and analyzed them using scanning tunneling microscopy and low-energy electron microscopy. The in situ low-energy electron microscope investigations show that the initial nucleation of the C₆₀ islands on the surface takes place at surface defects, such as domain boundaries and multiple steps. The in-plane lattice parameters of this C₆₀ film turns out to be the same as that of the bulk fcc(1 1 1) C₆₀. The line-on-line epitaxial structure is realized in spite of a weak interaction between the C₆₀ molecules and Bi(0 0 0 1) surface, while scanning tunneling spectroscopy indicates that there is a negligible charge transfer between the molecules and the surface.     

Valence band and surface core-level shift studies of the oxygen-induced p(3 × 1) reconstruction of the W(1 0 0) surface

Using synchrotron radiation, W 4f_7/2 and valence-band (VB) photoelectron spectroscopy was used to study the oxidation states of the p(3 × 1) reconstructed surface of W(1 0 0) produced by oxygen adsorption at 1500 K. The W 4f_7/2 study showed two features at 0.40 and 1.50 eV higher binding energies relative to the bulk feature which represent shifts to lower binding energies compared to the W 4f_7/2 features of the as-grown oxygen films on W(1 0 0). Co-existence of these features is a characteristic of the formation of the p(3 × 1) structure. The VB studies of this system and as-grown oxygen films at room temperature (RT) showed an oxygen-induced feature for the p(3 × 1) structure for which the peak maximum had shifted by 0.9 eV to higher binding energies compared to the as-grown films. The direction of shifts in the W 4f_7/2 and VB spectra for the p(3 × 1) structure confirmed the reduction of the charge transfer from W to oxygen compared to the as-grown films. A study of the VB changes with photon energy shows that the main component of the oxygen-induced feature in the p(3 × 1) VB at 6.6 ± 0.2 eV is related to a hybridized state between W 5d and O 2p electrons.     

Dynamic study of W atoms and clusters on W (1 1 1) surfaces

Using a field ion microscope, the diffusion behaviors and atomic processes of W atoms and clusters on W (1 1 1) surfaces were observed directly. The activation energy of W clusters diffusion on W (1 1 1) as a function of cluster size has an oscillatory and increasing behavior. But, the activation energy of a single W atom is especially high. The compact geometric structures are more stable and have higher activation energies of surface diffusion than structures with extra atoms at the periphery. Besides the terrace diffusion, other atomic processes such as the ascending, descending, detachment motion on W (1 1 1) surfaces were also observed. Unlike the general systems, their occurrence temperatures are quite near. These experimental results were used to discuss the formation mechanism of single atom W tips.     

On the preparation and electronic properties of clean W(1 1 0) surfaces

We have studied the influence of oxygen pressure during the cyclic annealing used for the cleaning of W(1 1 0) surfaces. For this purpose the surface morphology and electronic properties are measured by means of scanning tunneling microscopy (STM) and spectroscopy (STS), respectively. It is found that the surfaces with impurity atom densities as low as 2 × 10⁻³ can be obtained by gradually reducing the oxygen pressure between subsequent annealing cycles down to about 2 × 10⁻⁸ mbar in the final cycle. Only on the clean surface a bias-dependent spatial modulation of the local density of states (LDOS) is observed at step edges and around impurity sites by STS. In addition, we find a pronounced peak in the occupied states. In combination with density functional theory calculations these features can be traced back to a dispersive p_z-d_xz-type surface resonance band and the lower band edge of a surface state, respectively.     

Surface pre-melting and surface flattening of Bi nanofilms on Si(1 1 1)-7 × 7

We report on the in situ observation of temperature-driven drastic morphology evolution and surface pre-melting of the Bi(0 0 1) nanofilm deposited on the Si(1 1 1)-7 × 7 surface by use of spot-profile-analyzing low-energy electron diffraction (SPA-LEED). Surface step density of the single-crystalline, epitaxial Bi(0 0 1) film decreases above 350 K in a critical manner. On annealed Bi(0 0 1) films, we have detected surface pre-melting with a transition temperature of 350 K, which yields reversible diffraction intensity drop in addition to the harmonic Debye-Waller behavior. The observed surface flattening of the as-deposited film is driven by the increased amount of mobile adatoms created through the surface pre-melting.     

The CuGaSe2(0 0 1) surface: A (4 × 1) reconstruction

We report on the formation of a stable (4 × 1) reconstruction of the chalcopyrite CuGaSe₂(0 0 1) surface. Using Ar⁺ ion-bombardment and annealing of epitaxial CuGaSe₂ films grown on GaAs(0 0 1) substrates it was possible to obtain flat, well-ordered surfaces showing a clear (4 × 1) reconstruction. The cleanliness and structure were analyzed in situ by AES and LEED. AES data suggest a slight Se-enrichment and Cu-depletion upon surface preparation. Our results demonstrate that (0 0 1) surfaces of the Cu-III-VI₂(0 0 1) material can show stable, unfacetted surfaces.     

Oxidation of ultrathin indium layers on W(1 1 0)--a core-level photoemission study

We have studied the reaction of ultrathin In overlayers on W(1 1 0) with molecular oxygen at 300 K. At a coverage of 0.25 monolayers (ML) oxygen first chemisorbs dissociatively at free tungsten sites and oxidation of In occurs with some delay. At an In coverage of 1.2 ML complete oxidation of the closed overlayer is observed. Layers of 3 ML thickness first show rapid transformation from In to an In₂O₃-like species until an oxide monolayer is formed. Further oxidation occurs at much reduced rate. No oxygen-induced restructuring is observed for In at 300 K, in contrast to the response of Ag monolayers deposited on W(1 1 0).     

Structure and composition of the NiPd(1 1 0) surface

The NiPd(1 1 0) alloy surface was studied using low energy electron diffraction to measure the structure and composition of the first three atomic layers. The surface layer is highly enriched in Pd and has a significantly buckled structure. The second layer is also buckled, with displacements even larger than the surface layer. The second layer also exhibits intralayer segregation (chemical ordering), with alternate close-packed rows of atoms being Ni enriched and Pd enriched. The third layer has a structure and composition close to that of the bulk alloy. These results are compared with results for the other low index faces of NiPd, the extensive literature on NiPt alloy surfaces, and the growing body of theoretical literature for NiPd alloy surfaces.     

Buffer layer free large area bi-layer graphene on SiC(0 0 0 1)

The influence of hydrogen exposures on monolayer graphene grown on the silicon terminated SiC(0 0 0 1) surface is investigated using photoelectron spectroscopy (PES), low-energy electron microscopy (LEEM) and micro low-energy electron diffraction (μ-LEED). Exposures to ionized hydrogen are shown to have a pronounced effect on the carbon buffer (interface) layer. Exposures to atomic hydrogen are shown to actually convert/transform the monolayer graphene plus carbon buffer layer to bi-layer graphene, i.e. to produce carbon buffer layer free bi-layer graphene on SiC(0 0 0 1). This process is shown to be reversible, so the initial monolayer graphene plus carbon buffer layer situation is recreated after heating to a temperature of about 950 °C. A tentative model of hydrogen intercalation is suggested to explain this single to bi-layer graphene transformation mechanism. Our findings are of relevance and importance for various potential applications based on graphene-SiC structures and hydrogen storage.