Electron-induced attachment of chlorinated benzenes to Si(1 0 0)2 × 1

Thermal (300 K) and electron-induced reactions of benzene (Bz), chlorobenzene (ClPh), 1,2-dichlorobenzene (1,2-diClPh) and 1,4-dichlorobenzene (1,4-diClPh) with Si(1 0 0)2 × 1 have been examined by scanning tunneling microscopy (STM). Thermal reactions of Bz yielded predominantly the quadruply-σ-bound tight bridge, TB, configuration on top of the Si dimer-rows, For ClPh and 1,2-diClPh, which resembled one another, thermal reaction led with 45-50% yield to the doubly-σ-bound butterfly, BF, configuration, also on top of the dimer-row, and with 20% yield to a novel ‘displaced’, D, configuration to one side of a dimer-row. The adsorbate 1,4-diClPh was alone in favouring a configuration in which neighbouring dimer-rows were ‘linked’ (L) by a bright-feature centrally located between the dimer-rows. By ab initio calculation, we interpret D as due to the rupture of one C-Cl bond per adsorbate molecule, and L to the rupture of two C-Cl’s. The breaking of this weak bond is followed in the former case by attachment of the aromatic ring to one dimer-row, and in the latter to attachment to two adjacent dimer-rows. Application of a −5 V voltage pulse to the STM tip substantially increased the percentage of row-linking structures, L, for 1,4-diClPh, but neither −5 V nor +4-6 V volt pulses resulted in L-type binding of Bz. The postulated L product of 1,4-diClPh, with an aromatic ring linking the two inner Si atoms of adjacent dimer-rows and the two Cl’s on the outer Si atoms of the dimer-rows, is shown to be in accord with ab initio simulation of the observed STM image.     

An STM study of the Si(0 0 1) (2 × 7)-Gd, Dy surface

Both Gd and Dy induce two different reconstructions of the Si(0 0 1) surface with 2 × 4 and 2 × 7 unit cells. Detailed examination by scanning tunneling microscopy shows that the structure of both phases is essentially the same for both metals. Furthermore, the 2 × 7 unit cell contains structural subunits that are the same as the 2 × 4 structure. The similarities and differences between the two superstructures induced by the two metals are discussed.     

STM study of Si(1 1 3) 3 × 2-Ga surface

The Ga-adsorbed structure on Si(1 1 3) surface at low coverage has been studied by scanning tunneling microscopy (STM). The bright protrusion corresponding to the position of the dimer without the interstitial Si atom of the clean surface disappeared in the filled-state STM image after Ga adsorption, although the protrusion due to the Si adatom still remained. On the basis of the adatom-dimer-interstitial (ADI) model, this result indicates that the Ga atom is adsorbed interstitially at the center of another pentamer that does not have the interstitial Si atom. An ab initio calculation was performed and STM images were simulated.     

(6 × 2) Reconstruction of the Ag/Si(1 1 1) surface at 77 K

The ground state of the Ag/Si(1 1 1)-(3 × 1) has been investigated by low temperature scanning tunneling microscopy (STM) and density-functional theory. The Fourier transform of the STM image reveals a (6 × 2) reconstruction, which is theoretically found to yield a reconstruction with lower energy than the (3 × 1). The most stable (6 × 2) structural model leads to excellent correspondence between experimental and simulated STM images, and reveals a dimerization of the silver atoms in the channels formed by neighbouring honeycomb Si chains.     

Si nucleation on Si(1 1 1)-7 × 7: From cluster pairs to 2D islands

Nucleation of 2D islands in Si/Si(1 1 1)-7 × 7 molecular beam epitaxy is studied using scanning tunneling microscopy (STM). A detailed analysis of the population of small amorphous clusters coexisting on the surface with epitaxial 2D islands has been performed. It is shown that small clusters tend to form pairs. The pairs serve as precursors for 2D islands as confirmed by direct STM observations of the smallest 2D islands covering two adjacent half-unit cells of the 7 × 7 reconstruction. It is proved with scaling arguments that the critical nucleus for 2D island formation consists not only of the pair itself, but also includes additional adatoms not belonging to the stable clusters.     

STM study of acetylene reaction with Si(1 1 1): observation of a carbon-induced Si(1 1 1)√3×√3R30° reconstruction

The first stages of acetylene reaction with the Si(1 1 1)7 × 7 reconstructed surface kept at 600 °C are studied by recording scanning tunneling microscopy (STM) images during substrate exposure at a C₂H₂ pressure of 2 × 10⁻⁴ Pa (2 × 10⁻² mbar). We observed the progressive substitution of the 7 × 7 reconstruction with a carbon induced Si(1 1 1)√3×√3R30° reconstruction characterized by an atomic distance of 0.75 ± 0.02 nm, very close to that of the silicon 7 × 7 adatoms. This means that a carbon enrichment of the silicon outermost layers occurs giving rise to the formation of a Si-C phase different from the √3×√3R30° reconstruction typical of Si terminated hexagonal SiC(0 0 0 1) surface with an atomic distance of 0.53 nm. To explain STM images, we propose a reconstruction model which involves carbon atoms in T₄ and/or S₅ sites, as occurring for B doped Si(1 1 1) surface. Step edges and areas around the silicon surface defects are the first regions involved in the reaction process, which spreads from the upper part of the step edges throughout the terraces. Step edges therefore, progressively flakes and this mechanism leads, for the highest exposures, to the formation of large inlets which makes completely irregular the straight edge typical of the Si(1 1 1)7 × 7 terraces. These observations indicate that there occurs an atomic diffusion like that driving the meandering effect. Finally, the formation of a few crystallites is shown also at the lowest acetylene exposures. This is the first STM experiment showing the possibility to have carbon incorporation in a Si(1 1 1) matrix for higher amounts than expected, at least up to 1/6 of silicon atomic layer.     

The chemisorption of pentacene on Si(0 0 1)-2 × 1

Adsorption structures of the pentacene (C₂₂H₁₄) molecule on the clean Si(0 0 1)-2 × 1 surface were investigated by scanning tunneling microscopy (STM) in conjunction with density functional theory calculations and STM image simulations. The pentacene molecules were found to adsorb on four major sites and four minor sites. The adsorption structures of the pentacene molecules at the four major sites were determined by comparison between the experimental and the simulated STM images. Three out of the four theoretically identified adsorption structures are different from the previously proposed adsorption structures. They involve six to eight Si-C covalent chemical bonds. The adsorption energies of the major four structures are calculated to be in the range 67-128 kcal/mol. It was also found that the pentacene molecule hardly hopped on the surface when applying pulse bias voltages on the molecule, but was mostly decomposed.     

Growth of Si nanostructures on Ag(0 0 1)

The first stages of the growth of silicon on Ag(0 0 1) at moderate temperatures start by the formation of a p(3 × 3) superstructure, which continuously evolves with increasing coverage toward a more complex superstructure. In this paper, the atomic arrangement of the p(3 × 3) and of the “complex” superstructure has been investigated using scanning tunnelling microscopy, surface X-ray diffraction and low energy electron diffraction. The atomic model retained for the p(3 × 3) reconstruction consists in four silicon atoms (tetramers) adsorbed near hollow and bridge sites of the top most Ag(0 0 1) surface layer. For higher coverages, i.e., when the “complex” superstructure starts to develop, the silicon overlayer forms periodic stripes, most probably bi-layers, with a graphitic like structure.     

Selforganized nanopatterning of Si(0 0 1)

The (2 × n) superstructure of Si(0 0 1) consists of elongated (2 × 1) reconstructed stripes separated by a dimer-vacancy line every few nanometers, thus offering a means to obtain a nanopattered Si(0 0 1) surface. Scanning tunneling microscopy (STM) investigations of Si(0 0 1) substrates that were deoxidized at 880-920 °C reveal that the formation of the (2 × n) depends strongly on the Si coverage of the topmost surface layer. It forms only in a narrow coverage window ranging from 0.6 to 0.8 ML. Systematic Monte Carlo simulations by an algorithm that combines the diffusion of monomers and dimers with the simultaneous deposition of Si onto the Si(0 0 1) surface, corroborate the STM results and suggest Si deposition as a viable alternative for introducing dimer vacancies in a well-defined manner.     

Investigation of hydrogen interaction with the Si(1 1 1)-7 × 7 surface by STM with Bi/W tips

The STM technique with a special Bi/W tip was used to study the interaction of hydrogen atoms with the Si(1 1 1)-7 × 7 surface. The reactivity of different room temperature (RT) adsorption sites, such as adatoms (A), rest atoms (R), and corner holes (CH) was investigated. The reactivity of CH sites was found to be ∼2 times less than that of R and A sites. At temperatures higher than RT, hydrogen atoms rearrange among A, R, and CH sites, with increased occupation of R sites (T <  300 °C). Further temperature increase leads to hydrogen desorption, where its surface diffusion plays an active role. We discuss one of the possible desorption mechanisms, with the corner holes surrounded by a high potential barrier. Hydrogen atoms have a higher probability to overcome the desorption barrier rather than diffuse either into or out of the corner hole. The desorption temperature of hydrogen from CH, R, and A sites is about the same, equal to ∼500 °C. Also it is shown that hydrogen adsorption on the CH site causes slight electric charge redistribution over neighbouring adatoms, namely, increases the occupation of electronic states on A sites in the unfaulted halves of the Si(1 1 1)-7 × 7 unit cell. Based on these findings, the indirect method of investigation with conventional W tips was suggested for adsorbate interaction with CH sites.     

Atomic structure of the Si(5 5 12)-2 × 1 surface

Based on the results of scanning tunneling microscopy studies of the reconstructed Si(5 5 12)-2 × 1 surface, its atomic structure has been found. It turns out that Si(5 5 12)-2 × 1 consists of four one-dimensional structures: honeycomb (H) chain, π-bonded H′ (π) chain, dimer-adatom (D/A) row, and tetramer (T) row. Its period is composed of three subunits, i.e., (i) (3 3 7) unit with a D/A row [D(3 3 7)], (ii) (3 3 7) unit with a T row [T(3 3 7)], and (iii) (2 2 5) unit with both a D/A and a T row. Two kinds of adjacent subunits, T(3 3 7)/D(3 3 7) and D(3 3 7)/(2 2 5), are divided by H chains with 2× periodicity due to buckling, while one kind of adjacent subunits, T(3 3 7)/(2 2 5), is divided by a π chain with 1× periodicity. Two chain structures, H and π chains, commute with each other depending upon the external stresses perpendicular to the chain, which is the same for two row structures, D/A and T rows. It can be concluded that the wide and planar reconstruction of Si(5 5 12)-2 × 1 is originates from the stress balance among two commutable chains and two commutable rows.     

Oxygen-induced p(3 × 1) reconstruction of the W(1 0 0) surface

The oxidation of the W(1 0 0) surface at elevated temperatures has been studied using room temperature STM and LEED. High exposure of the clean surface to O₂ at 1500 K followed by flash-annealing to 2300 K in UHV results in the formation of a novel p(3 × 1) reconstruction, which is imaged by STM as a missing-row structure on the surface. Upon further annealing in UHV, this surface develops a floreted LEED pattern characteristic of twinned microdomains of monoclinic WO_x, while maintaining the p(3 × 1) missing-row structure. Atomically resolved STM images of this surface show a complex domain structure with single and double W〈0 1 0〉 rows coexisting on the surface in different domains.     

An STM study of the localized atomic reaction of 1,2- and 1,4-dibromobenzene at Si(1 1 1)-7 × 7

A comparative study is reported of the thermal reaction of 1,2- and 1,4-dibromobenzene (1,2- and 1,4-diBrPh) on Si(1 1 1)-7 × 7, investigated by STM. Some results are given for the intermediate case of 1,3-diBrPh. The STM images gave evidence of a different pattern of reaction to yield pairs of Br-Si for 1,2-, 1,3- and 1,4-diBrPh. The ratio of pairs of Br-Si to single bromination events was 1:2 for 1,2-diBrPh and 1:3 for 1,4-diBrPh. In many cases organic residue from the bromination reaction, R-Si, was evident in the STM image. The products R-Si and Br-Si were found to be bound to adjacent Si, for both 1,2- and 1,4-diBrPh. The mean Br?Br pair separation at the surface depended on the parent molecule, being 7.6 Å for 1,2-diBrPh, 10.3 Å for 1,3-diBrPh, and 11.3 Å for 1,4-diBrPh. These separations are, in each case, about 4 Å greater than the separation of the Br-atoms in the intact parent molecule, which increases systematically down the series. There was a marked decrease in the percentage of R-Si accompanying the Br-Si in going down the series, decreasing from 70% for 1,2- to 20% for 1,4-diBrPh; this was interpreted as being due to a decrease in the percentage of `benzene-mediated' reaction dynamics, in which the benzene ring was bound to the surface. At moderately increased surface temperature (45 °C) the reaction of 1,2- and also 1,4-diBrPh no longer resulted in R-Si formation, suggesting that the dynamics had altered from benzene-mediated to `bromine-mediated'.     

Vanadium nanoclusters on Si(1 1 1) 7 × 7 surface studied by scanning tunneling microscopy

The size distribution and shape transition of self-assembled vanadium silicide clusters on Si(1 1 1) 7 × 7 have been investigated by scanning tunneling microscopy. Nanoclusters were formed by submonolayer vanadium deposition at room temperature followed by subsequent annealing (solid phase epitaxy - SPE). At room temperature, initially V-nanoclusters are formed which occupy sites avoiding the corner hole parts of the unit cells in the Si(1 1 1) 7 × 7 surface. Upon annealing, strong metal-silicon reaction occur leading to the formation of vanadium silicide nanoclusters. As a function of temperature, both, flat (2D) and three dimensional (3D) clusters have been obtained. After annealing at temperatures around 900 K many faceted clusters are created, whereas at higher annealing temperature, around 1300 K, predominantly 3D clusters are formed. The size distribution of SPE grown clusters could be well controlled in the range of 3-10 nm. The cluster size depends on the annealing temperature as well as on the initial vanadium coverage. Based on high resolution STM images a structure model for one kind of vanadium disilicide clusters exposing atomically flat surfaces was proposed.     

Irreversible structural transformation of Si(1 1 4)-2 × 1 induced by subsurface carbon

Using scanning tunneling microscopy (STM), it has been found that the reconstruction of Si(1 1 4) is transformed irreversibly from a 2 × 1 structure composed of dimer (D), rebonded atom (R), and tetramer (T) rows (phase A) to a different kind of 2 × 1 structure composed of D, T, and T rows (phase B) by C incorporation. It has been confirmed by high-resolution synchrotron core-level photoemission spectroscopy (PES) that such an irreversible structural transformation is due to stable subsurface C atoms. They induce anisotropic compressive stress on the surface, which results in insertion of Si dimers to an R row to form a T row.     

Interaction of copper with sulfur on the sulfur-terminated Si(1 1 1)-(7 × 7) surface

The adsorption of S₂ on the Si(1 1 1)-(7 × 7) surface and the interaction of copper and sulfur on this sulfur-terminated Si(1 1 1) surface have been studied using synchrotron irradiation photoemission spectroscopy and scanning tunneling microscopy. The adsorption of S₂ at room temperature results in the passivation of silicon dangling bonds of Si(1 1 1)-(7 × 7) surface. Excessive sulfur forms S_n species on the surface. Copper atoms deposited at room temperature directly interact with S-adatoms through the formations of Cu-S bonds. Upon annealing the sample at 300 °C, CuS_x nanocrystals were produced on the sulfur-terminated Si(1 1 1) surface.     

Site selective atomic chlorine adsorption on the Si(1 1 1)7 × 7 surface

The spontaneous dissociation of trichloroethylene molecules on the Si(1 1 1)7 × 7 surface was investigated using STM. Chlorine atoms were identified by using voltage dependent imaging and by observing voltage dependent tip-induced diffusion. At low coverage, we identify one chlorine that dissociates and binds to an adatom, leaving a nearby chlorovinyl group as the other product bound to the surface. Chlorine atoms show strong site selectivity for corner adatoms and some preference for the faulted half of the unit cell. This result differs significantly from previous studies of chlorine on this surface and a site-selective mobile precursor model is used to explain this discrepancy. The observed site-selectivity is consistent with the high electronegativity value for chlorine.     

Atomic structure of Bi-dimer row selectively adsorbed on Si(5 5 12)-2 × 1 surface

In order to understand the atomic structure of nanostructures self-assembled on the template with one-dimensional symmetry, Bi/Si(5 5 12) system has been chosen and Bi-adsorption steps have been studied by STM. With Bi adsorption, the clean Si(5 5 12) is transformed to (3 3 7) terraces with disordered boundary due to mismatched periodicities between (3 3 7) and (5 5 12), and Bi-dimer rows are formed inside the (3 3 7) unit as follows: Initially, when Bi atoms are deposited at the adsorption temperature of about 450 °C, they selectively replace Si-dimers and Si-adatoms and form adsorbed Bi-dimers and Bi-adatoms, respectively. If additional Bi is supplied, the Bi-dimers adsorb on the Bi-dimers and Bi-adatoms in the first layer. These adsorbed dimers in the second layer are facing each other to form a Bi-dimer pair with relatively stable p³bonding. Finally, a single Bi-dimer adsorbs above the Bi-dimer pair in the second layer, at which point the Bi layer thickness saturates. It has been concluded that the Bi-dimer pair with stable p³ bonding is the composing element in the second layer and such site-selective adsorption is possible due to the substrate-strain relaxation through inserting Bi-buffer layer limited to specific sites of the substrate.     

Structure, defects, and impurities at the rutile TiO2(0 1 1)-(2 × 1) surface: A scanning tunneling microscopy study

The titanium dioxide rutile (0 1 1) (equivalent to (1 0 1)) surface reconstructs to a stable (2 × 1) structure upon sputtering and annealing in ultrahigh vacuum. A previously proposed model (T.J. Beck, A. Klust, M. Batzill, U. Diebold, C. Di Valentin, A. Selloni, Phys. Rev. Lett. 93 (2004) 036104/1) containing onefold coordinated oxygen atoms (titanyl groups, TiO) is supported by Scanning Tunneling Microscopy (STM) measurements. These TiO sites are imaged bright in empty-states STM. A few percent of these terminal oxygen atoms are missing at vacuum-annealed surfaces of bulk-reduced samples. These O vacancies are imaged as dark spots. Their number density depends on the reduction state of the bulk. Double vacancies are the most commonly observed defect configuration; single vacancies and vacancies involving several O atoms are present as well. Formation of oxygen vacancies can be suppressed by annealing a sputtered surface first in vacuum and then in oxygen; annealing a sputtered surface in oxygen results in surface restructuring and a (3 × 1) phase. Anti-phase domain boundaries in the (2 × 1) structure are active adsorption sites. Segregation of calcium impurities from the bulk results in an ordered overlayer that exhibits domains with a centered (2 × 1) periodicity in STM.     

Formation of carbon-induced dimer vacancy defects on Si(0 0 1)-2 × 1 by thermal decomposition of organic molecules-lack of dependence on the molecules’ structure

Two large and complex adsorbed organic molecules, coronene (C₂₄H₁₂) and C₆₀, have been used to produce Si dimer vacancy defects on Si(0 0 1) by thermal decomposition. Studies by STM show that the aligned structural arrangement of the dimer vacancy defects produced is independent of the chemical structure of the organic molecules. This indicates that the chemistry of the thermally decomposed carbon species produced by decomposition of the organic molecule controls the organization of the Si dimer vacancy defects. It is found that ∼1 C atom is responsible for each dimer vacancy defect for both molecules in accordance with earlier studies of C₂H₂ decomposition on Si(0 0 1).