Thickness dependence of electroresistance in La0.67Ca0.33MnO3 epitaxial films

The electroresistance (ER) of La_0.67Ca_0.33MnO₃ (LCMO) epitaxial thin films with different thicknesses was studied. For the 110 nm thick LCMO film, its ER shows a maximum at T_p, where the resistance shows a peak, and decreases to zero at lower temperatures. While for the 30 nm thick LCMO film, its ER is remarkable in a wide temperature range. Another interesting observation in this work is that the electric current can tune the magnetoresistance of the ultrathin LCMO thin film. The results were discussed by considering the coexistence of ferromagnetic metallic phase with the charge ordered phase, and the variation of the phase separation with film thickness and electric current. This work also demonstrates that electric current can tune the magnetoresistance of the manganites, which is helpful for their applications.     

Epitaxial growth La0.67Ca0.33MnO3 thin film by radio frequency sputtering method

Perfect epitaxial growth of La_0.67Ca_0.33MnO₃ (LCMO) thin film has been achieved on (1 0 0) LaAlO₃ (LAO) single crystal substrate by radio frequency sputtering method. X-ray diffraction (XRD) and electron diffraction analysis indicates that La_0.67Ca_0.33MnO₃ film grows epitaxially on LaAlO₃ along [1 0 0] direction of the substrate. The resistivity variation with temperature of the film shows a sharp metal to semiconductor transition peak around 253 K, which is close to that of the target. The magnetoresistance (MR) also reveals high quality epitaxy film characteristic at low temperatures and near the metal to semiconductor transition temperature.     

Electronic transport and magnetoresistance of a heterojunction composed of La0.7Ce0.3MnO3 and 1 wt% Nb-doped SrTiO3

We experimentally studied the transport properties and magnetoresistance behavior of a La_0.7Ce_0.3MnO₃/SrTiO₃ (doped by 1 wt% Nb) junction. Based on the analyses of the current-voltage relations and the depletion width, we conclude that the dominant transport mechanism of the junction is tunneling. The magnetoresistance of the junction is negative throughout the whole bias voltage range (from −1 V to 0.4 V) and the whole temperature range (below 300 K). It is believed that the magnetic field depresses the junction resistance by reducing the depletion width of the junction.     

Electric current-induced giant electroresistance in epitaxial La0.67Sr0.33MnO3 thin films

The electronic transport behavior of La_0.67Sr_0.33MnO₃ epitaxial thin films with different thicknesses has been investigated under various applied DC currents. The 20 and 70 nm thick films show a giant negative electroresistance (ER). In contrast, the films with 100 nm thickness show unusual giant positive ER, which can reach 30% with the current density of 1.8×10⁸ A/cm² at room temperature. It is interesting that the electric current can also change the magnetoresistance of the films. The results were explained by considering the spin polarized current induced increase of ferromagnetic metallic phase and current-induced lattice distortion via electron wind force under high current density.     

On the coexistence of spin and lattice polarons in the La0.67−xEuxCa0.33MnO3 CMR system

The electrical and magnetic transport properties of the La_0.67−xEu_xCa_0.33MnO₃ system exhibit lowering of insulator to metal and paramagnetic to ferromagnetic transition temperature (T_C) with the increase of Eu concentration in addition to possessing CMR property. The temperature variation of electrical resistivity and magnetic susceptibility for x=0.21 is found to have two distinct regions in the paramagnetic state for T>T_P; one with the localization of lattice polaron in the high-temperature region (T>1.5T_P) satisfying the dynamics of variable range hopping (VRH) model and the other being the combination of the spin and lattice polarons in the region T_P<T<1.5T_P. The resistivity variation with temperature and magnetic field, the cusp in the resistivity peak and CMR phenomenon are interpreted in terms of coexistence of spin and lattice small polarons in the intermediate region (T_P<T<1.5T_P). The spin polaron energy in the La_0.46Eu_0.21Ca_0.33MnO₃ system is estimated to be 106.73±0.90 meV and this energy decreases with the increase of external magnetic field. The MR ratio is maximal with a value of 99.99% around the transition temperature and this maximum persists till T→0 K, at the field of 8 T.     

Coexistence of large positive and negative magnetoresistance in La0.7Ca0.3MnO3 films with microcracks

The coexistence of large positive and negative low-field magnetoresistance (LFMR) in the ferromagnetic La_0.7Ca_0.3MnO₃ thin films with ordered microcrack (MC) distributions is reported. For the films with the highest linear density of MC, the negative LFMR can be up to −60% and rapidly changes to the positive value of 25% at 200 Oe field with the increase of temperature. We discuss the effect based on the spin-polarized tunneling and inhomogeneous magnetic state induced by the natural formations of MC in the films.     

Growth of single-phase c-axis aligned La1.2Ca1.8Mn2O7 films on SrTiO3 (001)

We report the growth of single phase, c-axis aligned thin films of La_1.2Ca_1.8Mn₂O₇ on SrTiO₃ (001) substrates using a controlled pulsed laser deposition method. In this method, constraint of epitaxy is utilized to stabilize the Ruddlesdon-Popper (RP) phase of La_1.2Ca_1.8Mn₂O₇. Oxygen ambient pressure and the rate of deposition play a very important role in influencing the epitaxial growth as well as maintaining phase purity of the material. The oxygen pressure inside the deposition chamber was very precisely controlled and varied during the layer-by-layer growth of the film. Films, prepared by our method, show excellent electrical and magnetic characteristics with a sharp metal-insulator transition at T_M-I=90 K, closely followed by a magnetic transition at T_C=91 K.     

The structure and magnetotransport properties of La2/3Sr1/3MnO3/Ba(La)TiO3 composites

The effect of Ba(La)TiO₃ doping on the structure and magnetotransport properties of La_2/3Sr_1/3MnO₃(LSMO)/xBa(La)TiO₃ (x=0.0, 1.0, 5.0 mol%) have been investigated. The X-ray diffraction patterns and microstructural analysis show that BaTiO₃ and LSMO phases exist independently in BaTiO₃-doped composites. The metal-insulator transition temperature (T_MI) decreases whereas the maximum resistivity increases very quickly by the increase of BaTiO₃ doping level. The partial substitution of Ba by La(0.35 mol%) results in a decrease in resistivity of LSMO/xBa(La)TiO₃ composites. Magnetoresistance of BaTiO₃-doped composites decreases monotonously in the temperature range 200-400 K in a magnetic field of 5 T, which is completely different from that of LSMO compound. The value of MR decreases at low field (H<1 T) and increases at high fields (H>1 T) with increasing the BaTiO₃ doping level at low temperatures below 280 K. These investigations reveal that the magnetotransport properties of LSMO/xBa(La)TiO₃ composites are dominated by spin-dependent scattering and tunneling effect at the LSMO/BaTiO₃/LSMO magnetic tunnel junction.     

Synthesis of magnetoresistive La0.7Sr0.3MnO3 nanoparticles by an improved chemical coprecipitation method

La_0.7Sr_0.3MnO₃ nanoparticles were prepared by a simple chemical coprecipitation route. Structural, magnetoresistance (MR), and magnetic properties were investigated. Rietveld refinement of X-ray powder diffraction result shows that the sample is single-phase with the space group of R3¯C. The result of field-emission scanning electronic microscopy shows that most of the grain sizes are distributed from 50 to 200 nm. The composition determined by energy-dispersive spectroscopy is the stoichiometry of La_0.7Sr_0.3MnO₃. The ferromagnetic to paramagnetic transition is sharp with Curie temperature T_C=367 K, which further confirms that the sample is single-phase. The steep change in MR at low fields is attributed to the alignment of the magnetization, while the high-field MR is due to the grain boundary effect.     

Magnetoresistance in La1−xCaxMnO3 (0≤x<0.4)

The magnetic and transport properties of La_1−xCa_xMnO₃ (0≤x<0.4) have been systematically studied. The magnetoresistance (MR) maximum appears at x=0.2-0.25 and the temperature dependence of MR for x>0.25 shows a much broader profile than that of samples for x=0.2-0.25. Based on a scenario in which there is a short-range charge ordering (CO) state coexisting in the ferromagnetic state matrix for x>0.25, and the least or even no short-range CO state exists in samples for x=0.2-0.25, the above observations can be understood.     

Magneto-transport and ferromagnetic resonance studies of polycrystalline La0.6Pb0.4MnO3 thin films

To understand the nature of grain boundaries in polycrystalline materials, magneto-transport and ferromagnetic resonance measurement have been performed in polycrystalline La_0.6Pb_0.4MnO₃ (LPMO) thin films prepared by pulsed laser deposition. Films are found to undergo a semiconductor to metal transition at 230 K and re-enter into the semiconducting state below 130 K. Microwave absorption measurements carried out as function of applied field show two components of resonant absorption signal. First component is in accordance with ferromagnetic transition of grains at Curie temperature and the second component shows antiferromagnetic transition of grain boundaries at 160 K. An additional non-resonant absorption signal centered at zero field has also been observed that supports transition from conducting to insulating grain boundaries at ∼160 K. Further, temperature dependence of resistance in semiconducting state at low temperatures is in accordance with coulomb blockade model indicating insulating nature of AFM grain boundaries.     

Large magnetoresistance induced by surface ferromagnetism in A-type antiferromagnetic La0.4Sr0.6MnO3 nanoparticles

Grain size effects on magnetic and transport properties for heavily Sr-doped A-type antiferromagnetic La_0.4Sr_0.6MnO₃ ceramics were studied. It was observed that with decrease in grain size, surface ferromagnetism could be introduced due to bond-breaking at surfaces. With decrease in grain size, the surface ferromagnetism was enhanced, and the phase transition order distinguished from the Arrott plot was a second one. The surface-induced ferromagnetism was insulating as judged from transport properties. With decrease in grain size, magnetoresistance was largely improved for both high magnetic and low magnetic fields. Under a 500 Oe magnetic field, the magnetoresistance is improved from 0.2%, 0.1%, 0.03% and 0.02% for the sample with grain size of 150 nm at 10, 100, 200 and 300 K, respectively, to 3%, 2.3%, 0.43% and 0.12% for the sample with grain size of 20 nm at 10, 100, 200 and 300 K. It was interesting to find that large magnetoresistance could be induced due to the surface ferromagnetism in A-type antiferromagnetic La_0.4Sr_0.6MnO₃ nanoparticles, which suggested that it was possible to search for manganites with relatively high low-field magnetoresistance in nanostructured A-type antiferromagnetic materials.     

The effect of grain size on electrical transport and magnetic properties of La0.9Te0.1MnO3

The effect of grain size on structural, magnetic and transport properties in electron-doped manganites La_0.9Te_0.1MnO₃ has been investigated. All samples show a rhombohedral structure with the space group at room temperature. The Mn-O-Mn bond angle decreases and the Mn-O bond length increases with the increase of grain size. All samples undergo paramagnetic (PM)-ferromagnetic (FM) phase transitions and the interesting phenomenon that both magnetization and the Curie temperature T_C decrease with increasing grain size is observed, which is suggested to mainly originate from the increase of the Mn-O bond length d_Mn-O. Additionally, ρ obviously increases with decreasing grain size due to the increase of both the height and width of tunneling barriers with decreasing grain size. The results indicate that both the intrinsic colossal magnetoresistance and the extrinsic interfacial magnetoresistance can be effectively tuned in La_0.9Te_0.1MnO₃ by changing grain size.     

Resistance switching in Fe-doped P0.7Ca0.3MnO3 thin films

An enhanced electric-pulse-induced resistance (EPIR) switching effect is observed in the Ag/P_0.7Ca_0.3Mn_1 − xFe_xO₃/YBa₂Cu₃O₇ (Ag/PCMFO/YBCO) and Ag/(PCMFO/PCMO)/YBCO structures. Unlike in the PCMO-based EPIR devices, where the Ag/PCMO interface plays a crucial role, both the Ag/PCMFO interface and the bulk PCMFO are found to have significant contributions to the EPIR switching of the PCMFO-based device. A possible explanation is to extend the pulse-driven oxygen ion/vacancy motion model at the metal/PCMO interface region to the bulk PCMFO.     

Effect of magnetic film thickness on rectifying properties of La0.8Sr0.2MnO3/TiO2 heterostructures

The La_0.8Sr_0.2MnO₃ (LSMO)/ TiO₂ heterostructures with different thicknesses of the LSMO films were successfully synthesized using the RF magnetron sputtering technique. Excellent rectifying characteristics are presented in all heterostructures in a wide temperature range. The differences of the diffusive potentials for three heterojunctions are very little at 300 K. The samples exhibit a high resistance that plays an important role on their rectifying properties. The diffusive potential decreases with increasing temperature. The result is attributed to both the reduction of the thickness of the deletion layer due to the thermal diffusion and the modulation of the interfacial electronic structure of the heterostructures. The metal-insulator (M-I) transition is observed clearly from the single LSMO layers and the LSMO/ TiO₂ p-n heterojunctions.     

Emission Mössbauer studies of the magnetoresistive compound, La0.7Sr0.3MnO3

The magnetic behavior of the Sr_0.3 manganite is studied using a local microprobe, ⁵⁷Co. In contrast with Ca substituted manganites, a much larger fraction of the material exhibits short-range order with superparamagnetic-like behavior even at 80 K. The differences in behavior are attributed to the large mismatch between the ionic radii of La⁺³ and the divalent substituent Sr⁺², which introduces anharmonicity in local vibrations. In common with all other compounds exhibiting negative bulk magnetoresistivity, the Sr_0.3 compound also exhibits very marked softening of lattice as one approaches T_c from below. Application of an external magnetic field results in coalescing of nanosized magnetic clusters to form larger ones with better alignment of spins.     

Unusual magnetic and transport properties above the Curie temperature in La2/3Ca1/3MnO3

Measurements of susceptibility, electron paramagnetic resonance and resistivity for La_2/3Ca_1/3MnO₃ reveal a common temperature range between ∼266 and ∼300 K, where unusual aspects of physical properties are observed. The experimental results are discussed from the Griffiths theory that predicts the formation of ferromagnetic clusters before the Curie temperature is reached. It is emphasized that this theory incorporating the double-exchange mechanism could provide a good physical basis for the understanding of unusual transport properties.     

The influence of the O–O isotope substitution on spin dynamics of (La0.25Pr0.75)0.7Ca0.3MnO3: La NMR data

The ¹³⁹La NMR spectra and spin–spin relaxation times have been measured for the ¹⁶O and ¹⁸O isotope-substituted manganite (La_0.25Pr_0.75)_0.7Ca_0.3MnO₃ in the external magnetic field of 5 T. The NMR signal wipe-out has been observed in the ¹⁸O-enriched sample in the charge-ordered state. This phenomenon is connected with a sharp increase in the spin–spin relaxation rate. The great isotope-effect observed provides a clear evidence of an essential role of oxygen motion in controlling the long-range magnetic order in manganites.     

Room temperature magnetoresistance in Ln2/3A1/3MnO3 manganites

The investigation of the manganites La_2/3−xPr_xSr_1/3MnO₃, La_2/3Sr_1/3−xCa_xMnO₃ and La_2/3+xCa_1/3−2xAg_xMnO₃, which all exhibit Mn³⁺:Mn⁴⁺=2, shows that it is possible to reach high magnetoresistance at room temperature, up to 21% under 1.2 T. These materials are compared to La_5/6Ag_1/6MnO₃ which corresponds to the same Mn³⁺:Mn⁴⁺ ratio and exhibits a magnetoresistance of 25% in this field. An interesting feature deals with the value of the insulator-metal transition temperature T_IM, often higher than T_C, especially for Ag-based compounds. It is suggested that the latter results either from a better oxygenation of the surface of the grains or from a migration of silver toward the surface.