Clustering of magnetic nanoparticles using a double hydrophilic block copolymer, poly(ethylene oxide)-b-poly(acrylic acid)

The use of a double hydrophilic block copolymer (DHBC), poly(ethylene oxide)-block-poly(acrylic acid) (PEO-b-PAA) to prepare magnetic nanoparticle (MNP) clusters was investigated. In this one-pot synthesis method, the DHBC controlled the particle growth and served as both stabilizer and clustering agent. Depending on the iron-to-polymer ratio, the synthesized particles can be in the form of colonies of small iron oxide particles or clusters of these particles with size larger than 100 nm. Compared to the previous reported result using random copolymers, the clusters prepared with DHBC were more compact and homogeneous. The yield of clusters increased when the amount of polymer added was limiting. Insufficient amounts of polymer resulted in the formation of bare patches on the magnetite surface, and the strong van der Waals attraction induced cluster formation.     

Effect of the duty ratio on the indium tin oxide (ITO) film deposited by in-line pulsed DC magnetron sputtering method for resistive touch panel

The indium tin oxide (ITO) film was deposited on PET (polyethylene terephthalate) film using in-line pulsed DC magnetron sputtering system with different duty ratios. The reverse time and the frequency of pulsed DC power were changed to obtain the different duty ratios. From the electrical and optical properties such as the sheet resistance, resistivity, thickness and transmittance, the pulsed DC sputtered ITO/PET films were also superior to the DC sputtered ITO/PET films. The reverse time had little effect on the properties of the ITO/PET film and the frequency of pulsed DC power had an immerse effect on the properties of the ITO/PET films. The optimal ITO/PET film was obtained when the frequency was 200 kHz, the reverse time was 1 μs, and the duty ratio was about 80%.     

Surface chemistry and catalysis of oxide model catalysts from single crystals to nanocrystals

Fundamental understandings of surface chemistry and catalysis of solid catalysts are of great importance for the developments of efficient catalysts and corresponding catalytic processes, but have been remaining as a challenge due to the complex nature of heterogeneous catalysis. Model catalysts approach based on catalytic materials with uniform and well-defined surface structures is an effective strategy. Single crystals-based model catalysts have been successfully used for surface chemistry studies of solid catalysts, but encounter the so-called “materials gap” and “pressure gap” when applied for catalysis studies of solid catalysts. Recently catalytic nanocrystals with uniform and well-defined surface structures have emerged as a novel type of model catalysts whose surface chemistry and catalysis can be studied under the same operational reaction condition as working powder catalysts, and they are recognized as a novel type of model catalysts that can bridge the “materials gap” and “pressure gap” between single crystals-based model catalysts and powder catalysts. Herein we review recent progress of surface chemistry and catalysis of important oxide catalysts including CeO₂, TiO₂ and Cu₂O acquired by model catalysts from single crystals to nanocrystals with an aim at summarizing the commonalities and discussing the differences among model catalysts with complexities at different levels. Firstly, the complex nature of surface chemistry and catalysis of solid catalysts is briefly introduced. In the following sections, the model catalysts approach is described and surface chemistry and catalysis of CeO₂, TiO₂ and Cu₂O single crystal and nanocrystal model catalysts are reviewed. Finally, concluding remarks and future prospects are given on a comprehensive approach of model catalysts from single crystals to nanocrystals for the investigations of surface chemistry and catalysis of powder catalysts approaching the working conditions as closely as possible.