The formation of dimeric phosph(III)azane macrocycles [[P(mu-NtBu)]2.LL]2 [LL = organic spacer

The dimeric macrocycles [[P(mu-NtBu)]2.LL]2 [LL = OCH2C(Me)2CH2O (1), 2,6-(NH)2C5H3N (2), 1,2-(NH)2C6H4(3)] have been obtained by the reactions of the appropriate diols and diamines (LLH2) with the dimeric phosph(III)azane [ClP(mu-NtBu)]2. Under different conditions the reaction of 1,2-(NH2)2C6H4 with [ClP(mu-NtBu)]2 gives the monomer [[P(mu-NtBu)]2.[1,2-(NH)2C6H4]] (4) (instead of the dimer 3). Contrary to the literature, the results illustrate that the formation of dimeric macrocycles is common in these reactions and dependent among other factors on the steric demands and length of the organic spacer (LL) as well as the reaction conditions.     

The folded, tetrameric phosph(III)azane macrocycle [(P(mu-NtBu))2(1,4-(NH)2C6H4)]4

The tetrameric macrocycle [(P(mu-NtBu))2(1,4-(NH)2C6H4)]4, obtained from the reaction of the phosphazane dimer [ClP(mu-NtBu)]2 with p-phenylenediamine, has an unusual folded conformation in the solid state and contains a roughly tetrahedral arrangement of endo N-H groups for the potential coordination of anions.     

Targeting large phosp(III)azane macrocyles [{P(mu-NR)}(2)(LL)](n) (n> or = 2)

The condensation reactions of the dimer [ClP(micro-NR)](2) with organic diacids [LL(H)(2)], possessing linear orientations of their organic groups, result in the formation of phospha(III)zane macrocyles of the type [{P(mu-NR)}(2)(LL)](n) of various sizes. The series of macrocycles [{P(mu-N(t)Bu)}(2){1,5-(NH)(2)C(10)H(6)}](3), [{P(mu-NCy)}(2)(1,5-O(2)C(10)H(6))](n) [n = 3; n = 4], [{P(mu-N(t)Bu)}(2){1,4-(NH)(2)C(6)H(4)}](4), [{P(mu-N(t)Bu)}(2)(1,4-O(2)C(6)H(4))], [{P(mu-NCy)}(2)(1,4-O(2)C(6)H(4))](3) and [{P(mu-N(t)Bu)}(2){(NH)C(6)H(4)OC(6)H(4)(NH)}](2) can be related to classical organic frameworks, like calixarenes.     

Synthesis and structure of the Li13 cage [[[O-P(mu-NtBu)]2Li2]3(LiCl)6Li(Cl/OnBu)0.5(thf)7], containing a [O-P(mu-NtBu)]2(2-) dianion

The hydrolysis of [ClP(mu-NtBu)]2 with H2O-Et3N in thf, followed by in situ lithiation with nBuLi gives the Li13 cage [[[O-P(mu-NtBu)]2Li2]3(LiCl)6Li(Cl/OnBu)0.5(thf)7], containing a [O-P(mu-NtBu)]2(2-) dianion that is isoelectronic with ligands of the type [(RN)P(mu-NR)]2(2-).     

Stereoisomerism in polyoxometalates: structural and spectroscopic studies of bis(malate)-functionalized cluster systems

The tetrameric macrocycle [(P(mu-NtBu))2(1,4-(NH)2C6H4)]4, obtained from the reaction of the phosphazane dimer [ClP(mu-NtBu)]2 with p-phenylenediamine, has an unusual folded conformation in the solid state and contains a roughly tetrahedral arrangement of endo N-H groups for the potential coordination of anions.     

Experimental and theoretical investigations of lithium and magnesium derivatives of bis(tert-butylamido)cyclodiphosph(III/V)- and (V/V)azane mono- and ditellurides

Deprotonation of bis(tert-butylamido)cyclophosph(III/III)azane with organolithium or organomagnesium reagents followed by oxidation with elemental tellurium is a viable approach to the preparation of metal cyclodiphosphazane mono- and ditellurides. The reaction of the cyclodiphosph(III)azane [tBu(H)NP(mu-NtBu)2PN(H)tBu] (1) with elemental tellurium in boiling toluene affords the monotelluride [tBu(H)N(Te)P(mu-NtBu)2PN(H)tBu] (9). A similar reaction involving the magnesium salt Mg[tBuNP(mu-NtBu)2PNtBu](THF)2 (2) also yields a monotelluride Mg[tBuN(Te)P(mu-NtBu)2PNtBu]-(THF)2 (10). By contrast, reaction of the lithium salt Li2[tBuNP(mu-NtBu)2PNtBu](THF)2 (3) with tellurium results in double oxidation and the formation of the ditellurides Li2[tBuN(Te)P(mu-NtBu)2P(Te)NtBu](THF)4 (11) and Li2-[tBuN(Te)P(mu-NtBu)2P(Te)NtBu](tmeda)2 (12). Compounds 9-12 have been characterized by multinuclear (1H, 7Li, 13C, 31P, and 125Te) NMR, while 9, 10, and 12 have also been characterized by X-ray crystallography. The structure of 9 reveals a typical cis/endo, exo arrangement, with no intermolecular contacts to tellurium. The seco-heterocubic structure, observed in 2, is retained in 10, with the ligand chelating magnesium in an N,N',N"-manner. Unique coordination behavior is exhibited by the ditelluride 12, in which the dianionic ligand is attached to the two lithium centers in both Te,Te' and Te,N bonding modes. Multinuclear NMR data are consistent with retention of the solid-state structures of 9-12 in solution at low temperatures. The reactivity of cyclodiphosph(III/III)azanes toward chalcogens is rationalized by using theoretical calculations (semiempirical PM3 level of theory), which show an inverse correlation between the charge at the phosphorus center and the ease of oxidation.     

Selection of the cis and trans phosph(III)azane macrocycles [{P(mu-NtBu)}2(1-Y-2-NH-C6H4)]2(Y=O, S)

The 1 : 1 reactions of [ClP(mu-NtBu)]2 with the difunctional aromatic amines 1,2-1-YH-2-NH2-C6H4 in the presence of Et3N give the dimeric phosph(III)azane macrocycles [{P(mu-NtBu)2(1-Y-2-HN-C6H4)]2, predominantly as the cis isomer in the case of Y=O (1.cis) and as the trans isomer for Y=S (2.trans). Model M.O. calculations suggest that the selection of the cis and trans isomers is not thermodynamically controlled. The alternative isomers 1.trans and 2.cis are generated exclusively by the deprotonation of the model intermediates [(1-Y-2-NH2-C6H4)P(mu-NtBu)]2[Y=O (3), S (4)] with nBuLi followed by cyclisation with [ClP(mu-NtBu)]2. The solid-state structures of 1.cis/trans(50 : 50), 2.cis, 3 and 4 are reported.     

Transfer hydrogenation processes to mu(3)-alkylidyne groups on the organotitanium oxide [Ti(3)Cp*O(3)

The photochemical treatment of mu(3)-alkylidyne complexes [[TiCp*(mu-O)](3)(mu(3)-CR)] (R=H (1), Me (2), Cp*=eta(5)-C(5)Me(5)) with the amines (2,6-Me(2)C(6)H(3))NH(2), Et(2)NH, and Ph(2)NH and the imine Ph(2)C=NH leads to the partial hydrogenation of the alkylidyne moiety that is supported on the organometallic oxide, [Ti(3)Cp*O(3)], and the formation of new oxoderivatives [[TiCp*(3)(mu-CHR)(R'NR")] (R"=2,6-Me(2)C(6)H(3), R'=H, R=H (3), Me (4); R'=R"=Et, R=H (5), Me (6); R'=R"=Ph, R=H (7), Me (8)) and [[TiCp*(mu-O)](3)(mu-CHR)(N=CPh(2))] (R=H (9), R=Me (10)), respectively. A sequential transfer hydrogenation process occurs when complex 1 is treated with tBuNH(2), which initially gives the mu-methylene [[TiCp*(mu-O)](3)(mu-CH(2))(HNtBu)] (11) complex and finally, the alkyl derivative [[TiCp*(mu-O)](3)(mu-NtBu)Me] (12). Furthermore, irradiation of solutions of the mu(3)-alkylidyne complexes 1 or 2 in the presence of diamines o-C(6)H(4)(NH(2))(2) and H(2)NCH(2)CH(2)NH(2) (en) affords [[TiCp*(mu-O)](3)(mu(3)-eta(2)-NC(6)H(4)NH)] (13) and [[TiCp*(mu-O)](3)(mu(3)-eta(2)-NC(2)H(4)NH)] (14) by either methane or ethane elimination, respectively. In the reaction of 1 with en, an intermediate complex [[TiCp*(mu-O)](3)(mu-CH(2))(NHCH(2)CH(2)NH(2))] (15) is detected by (1)H NMR spectroscopy. Thermal treatment of the complexes 4-10 quantitatively regenerates the starting mu(3)-alkylidyne compounds and the amine R'(2)NH or the imine Ph(2)C=NH; however, heating of solutions of 3 or 4 in [D(6)]benzene or a equimolecular mixture of both at 170 degrees C produces methane, ethane, or both, and the complex [[TiCp*(mu-O)](3)[mu(3)-eta(2)-NC(6)H(3)(Me)CH(2)]] (16). The molecular structure of 8 has been established by single-crystal X-ray analysis.     

Synthesis and elaboration of the dinuclear iron-imide cluster core [Fe2(mu-NR)2]2+

The protolysis of mononuclear ferric amide precursors FeCl[N(SiMe3)2]2(THF) (1) or [FeCl2{N(SiMe3)2}2]- (2) by primary amines provides, under suitable conditions, an effective route to dinuclear weak-field ferric-imide clusters with [Fe2(mu-NR)2]2+ cores. In the synthesis of known arylimide clusters [Fe2(mu-NAr)2Cl4]2- (Ar = Ph, p-Tol, Mes) from 2, the counterion has a major effect on selectivity and yield, and the use of quaternary ammonium salts affords a substantial improvement over earlier, Li+-based chemistry. The new tert-butylimide core is obtained by protolysis of 1 with excess tBuNH2 to give crystalline cis-Fe2(mu-NtBu)2Cl2(NH2tBu)2 (9). Complex 9 can be transformed to other dinuclear species through substitution of the terminal amines by pyridines, PEt3, or chloride, or through protolysis of bridging alkylimides by arylamines, allowing isolation of trans-Fe2(mu-NtBu)2Cl2(DMAP)2 (DMAP = 4-dimethylaminopyridine), cis-Fe2(mu-NtBu)2Cl2(PEt3)2, [Fe2(mu-NtBu)2Cl4]-, and trans-Fe2(mu-NPh)2Cl2(NH2tBu)2. The susceptibility of alkyl substituents to beta-elimination appears to limit the general applicability of protolytic cluster assembly using alkylamines. The dinuclear clusters have been characterized by X-ray, spectroscopic, and electrochemical analyses.     

Influence of hydrogen bonding on the assembly of six-membered vanadium borophosphate cluster anions: synthesis and structures of (NH4)2(C2H10N2)6[Sr(H2O)5]2[V2P2BO12](6)10H2O, (NH4)2(C3H12N2)6[Sr(H2O)4]2[V2P2BO12](6)17H2O, and (NH4)3(C4H14N2)4 5[Sr(H2O)5]2[Sr(H2O)4][V2P2BO12]6 10H2O

Three new strontium vanadium borophosphate compounds, (NH4)2(C2H10N2)6[Sr(H2O)5]2[V2P2BO12]6 10H2O (Sr-VBPO1) (1), (NH4)2(C3H12N2)6[Sr(H2O)4]2[V2P2BO12]6 17H2O (Sr-VBPO2) (2), and (NH4)3(C4H14N2)4.5[Sr(H2O)5]2[Sr(H2O)4][V2P2BO12]6 10H2O (Sr-VBPO3) (3) have been synthesized by interdiffusion methods in the presence of diprotonated ethylenediamine, 1,3-diaminopropane, and 1,4-diaminobutane. Compound 1 has a chain structure, whereas 2 and 3 have layered structures with different arrangements of [(NH4) [symbol: see text] [V2P2BO12]6] cluster anions within the layers. Crystal data: (NH4)2(C2H10N2)6[Sr(H2O)5]2[V2P2BO12]6 10H2O, monoclinic, space group C2/c (no. 15), a = 21.552(1) A, b = 27.694(2) A, c = 20.552(1) A, beta = 113.650(1) degrees, Z = 4; (NH4)2(C3H12N2)6[Sr(H2O)4]2[V2P2BO12]6 17H2O, monoclinic, space group I2/m (no. 12), a = 15.7618(9) A, b = 16.4821(9) A, c = 21.112(1) A, beta = 107.473(1) degrees, Z = 2; (NH4)3(C4H14N2)4.5[Sr(H2O)5]2[Sr(H2O)4] [V2P2BO12]6 10H2O, monoclinic, space group C2/c (no. 15), a = 39.364(2) A, b = 14.0924(7) A, c = 25.342(1) A, beta = 121.259(1) degrees, Z = 4. The differences in the three structures arise from the different steric requirements of the amines that lead to different amine-cluster hydrogen bonds.     

Synthesis and characterization of heterometallic clusters (Ir2Rh, Ir2W, Rh3) Containing 1,2-dicarba-closo-dodecaborane(12)-1,2-dithiolate chelate ligands, [(B10H10)C2S2]2-

The 16-electron half-sandwich complex [Cp*Ir[S2C2(B10H10)]] (Cp* = eta5-C5Me5) (1a) reacts with [[Rh(cod)(mu-Cl)]2] (cod = cycloocta-1,5-diene, C8H12) in different molar ratios to give three products, [[Cp*Ir[S2C2(B10H9)]]Rh(cod)] (2), trans-[[Cp*Ir[S2C2(B10H9)]]Rh[[S2C2(B10H10)]IrCp*]] (3), and [Rh2(cod)2[(mu-SH)(mu-SC)(CH)(B10H10)]] (4). Complex 3 contains an Ir2Rh backbone with two different Ir-Rh bonds (3.003(3) and 2.685(3) angstroms). The dinuclear complex 2 reacts with the mononuclear 16-electron complex 1a to give 3 in refluxing toluene. Reaction of 1a with [W(CO)3(py)3] (py = C5H5N) in the presence of BF3.EtO2 leads to the trinuclear cluster [[Cp*Ir[S2C2(B10H10)]]2W(CO)2] (5) together with [[Cp*Ir(CO)[S2C2(B10H10)]]W(CO)5] (6), and [Cp*Ir(CO)[S2C2(B10H10)]] (7). Analogous reactions of [Cp*Rh[S2C2(B10H10)]] (1 b) with [[Rh(cod)(mu-Cl)]2] were investigated and two complexes cis-[[Cp*Rh[S2C2(B10H10)]]2Rh] (8) and trans-[[Cp*Rh[S2C2(B10H10)]]2Rh] (9) were obtained. In refluxing THF solution, the cisoid 8 is converted in more than 95 % yield to the transoid 9. All new complexes 2-9 were characterized by NMR spectroscopy (1H, 11B NMR) and X-ray diffraction structural analyses are reported for complexes 2-5, 8, and 9.     

First example of the solid-state thermal cyclometalation of ligated benzophenone imine giving novel luminescent platinum(II) species

The (benzophenone imine)platinum(II) compounds trans-[PtCl2(Ph2C=NH)(RR'SO)] [R, R'=Me, Me (2); n-Pr, n-Pr (3); (CH2)4 (4); Me, Ph (5); Me, p-MeC6H4 (6)] were prepared by the reaction of Ph2C=NH with K[PtCl3(RR'SO)], obtained in situ from K2[PtCl4] and the corresponding sulfoxide, giving 2-6 as well as cis-[PtCl2(Ph2C=NH)2] (1) as a minor product. The complexes were characterized by 1H, 13C, and 195Pt NMR and IR spectroscopy, electrospray ionization mass spectrometry, and C, H, and N elemental analysis. The X-ray crystallography of 1 enables confirmation of the cis configuration of the complex, while in 2 and 4.1/2CHCl3, the imine and sulfoxide ligands are mutually trans. The solid-state structure of 4.1/2CHCl3 consists of two dimeric Pt moieties representing a rather weak Pt...Pt interaction. The dimeric architecture of 4.1/2CHCl3 is enhanced by the hydrogen bonding between imine H atoms and O atoms. The orthometalation of 1 and 2-6 proceeds both in the solid phase and in a toluene suspension, leading to the formation of [PtCl{Ph(C6H4)C=NH}(Ph2C=NH)] (7) and [PtCl{Ph(C6H4)C=NH}(RR'SO)] (8-12), respectively, isolated in nearly quantitative yields. Complexes 8-12 are emissive at room temperature both in solution (lambdaemmax approximately 535 nm) and in the solid state (lambdaemmax 560-610 nm), with excited-state lifetimes of ca. 300-600 ns, representing a new family of PtII-based luminescent complexes. Compounds 8 and 10 have been characterized by X-ray analysis, confirming the square-planar coordination geometry of the metal center with the almost planar platinacycles. In 8, the asymmetric unit contains two independent Pt molecules, while in 10, it includes four Pt molecules linked by the intermolecular hydrogen-bonding network between the NH group and Cl atoms.     

Synthesis and deprotonation of P-H-functionalised phosph(III)azanes; borohydride dependency on the formation of cis- or trans-[HP(mu-NtBu)2PNtBuH

The reaction of [ClP(muNtBu)2PNtBuH] (1) with LiBsBu3H yields trans-[HP(muNtBu)2PNtBuH] (2), by contrast, reaction with LiBEt3H yields cis-[HP(mu-NtBu)2PNtBuH] (3). Compounds and represent the first examples of P-H-functionalised cyclophosph(III)azanes. Deprotonation of with BnNa (Bn=benzyl) gives the first example of a secondary phosphine-functionalised cyclodiphosph(III)azane anion [HP(mu-NtBu)2PNtBu]- (4).     

Activation of carbodiimide and transformation with amine to guanidinate group by Ln(OAr)3(THF)2 (Ln: lanthanide and yttrium) and Ln(OAr)3(THF)2 as a novel precatalyst for addition of amines to carbodiimides: influence of aryloxide group

Reaction of Ln(OAr(1))(3)(THF)(2) (Ar(1)= [2,6-((t)Bu)(2)-4-MeC(6)H(2)] with carbodiimides (RNCNR) in toluene afforded the RNCNR coordinated complexes (Ar(1)O)(3)Ln(NCNR) (R = (i)Pr (isopropyl), Ln = Y (1) and Yb (2); R = Cy (cyclohexyl), Ln = Y (3)) in high yields. Treatment of 1 and 2 with 4-chloroaniline, respectively, at a molar ratio of 1:1 yielded the corresponding monoguanidinate complex (Ar(1)O)(2)Y[(4-Cl-C(6)H(4)N)C(NH(i)Pr)N(i)Pr](THF) (4) and (Ar(1)O)(2)Yb[(4-Cl-C(6)H(4)N)C(NH(i)Pr)N(i)Pr](THF) (5). Complexes 4 and 5 can be prepared by the reaction of Ln(OAr(1))(3)(THF)(2) with RNCNR and amine in toluene at a 1:1:1 molar ratio in high yield directly. A remarkable influence of the aryloxide ligand on this transformation was observed. The similar transformation using the less bulky yttrium complexes Y(OAr(2))(3)(THF)(2) (Ar(2) = [2,6-((i)Pr)(2)C(6)H(3)]) or Y(OAr(3))(3)(THF)(2) (Ar(3) = [2,6-Me(2)C(6)H(3)]) did not occur. Complexes Ln(OAr(1))(3)(THF)(2) were found to be the novel precatalysts for addition of RNCNR with amines, which represents the first example of catalytic guanylation by the lanthanide complexes with the Ln-O active group. The catalytic activity of Y(OAr(1))(3)(THF)(2) was found to be the same as that of monoguanidinate complex 4, indicating 4 is one of the active intermediates in the present process. The other intermediate, amide complex (Ar(1)O)(2)Ln[(2-OCH(3)-C(6)H(4)NH)(2-OCH(3)-C(6)H(4)NH(2))] (6), was isolated by protonolysis of 4 with 2-OCH(3)-C(6)H(4)NH(2). All the complexes were structurally characterized by X-ray single crystal determination.     

First characterization of the ammine-ammonium complex [(NH4(NH3)4)2(mu-NH3)2]2+ in the crystal structure of [NH4(NH3)4][B(C6H5)4].NH3 and the [NH4(NH3)4]+ complex in [NH4(NH3)4][Ca(NH3)7]As3S6.2NH3 and [NH4(NH3)4][Ba(NH3)8]As3S6.NH3

The compound [NH4(NH3)4][B(C6H5)4].NH3 (1) was prepared by the reaction of NaB(C(6)H(5))(4) with a proton-charged ion-exchange resin in liquid ammonia. [NH(4)(NH(3))(4)][Ca(NH(3))(7)]As(3)S(6).2NH(3) (2) and [NH4(NH3)4][Ba(NH3)8]As3S6.NH3 (3) were synthesized by reduction of As(4)S(4) with Ca and Ba in liquid ammonia. All ammoniates were characterized by low-temperature single-crystal X-ray structure analysis. They were found to contain the ammine-ammonium complex with the maximal possible number of coordinating ammonia molecules, the [NH4(NH3)4]+ ion. 1 contains a special dimer, the [(NH4(NH3)4)2(mu-NH3)2]2+ ion, which is formed by two[NH4(NH3)4]+ ions linked by two ammonia molecules. The H(3)N-H...N hydrogen bonds in all three compounds range from 1.82 to 2.20 A (DHA = Donor-H...Acceptor angles: 156-178 degrees). In 2 and 3, additional H(2)N-H...S bonds to the thioanions are observed, ranging between 2.49 and 3.00 A (DHA angles: 120-175 degrees). Two parallel phenyl rings of the [B(C(6)H(5))(4)](-) anion in 1 form a pi...pi hydrogen bond (C...C distance, 3.38 A; DHA angles, 82 degrees), leading to a dimeric [B(C6H5)4]2(2-) ion.     

Aluminium complexes containing bidentate and symmetrical tridentate pincer type pyrrolyl ligands: synthesis, reactions and ring opening polymerization

A series of aluminium derivatives containing substituted bidentate and symmetrical tridentate pyrrolyl ligands, [C(4)H(3)NH(2-CH(2)NH(t)Bu)] and [C(4)H(2)NH(2,5-CH(2)NH(t)Bu)(2)], in toluene or diethyl ether were synthesized. Their reactivity and application for the ring opening polymerization of ε-caprolactone have been investigated. The reaction of AlMe(3) with one equiv. of [C(4)H(3)NH(2-CH(2)NH(t)Bu)] in toluene at room temperature affords [C(4)H(3)N(2-CH(2)NH(t)Bu)]AlMe(2) (1) in 70% yield by elimination of one equiv. of methane. Interestingly, while reacting AlMe(3) with one equiv. of [C(4)H(3)NH(2-CH(2)NH(t)Bu)] in toluene at 0 °C followed by refluxing at 100 °C, [{C(4)H(3)N(2-CH(2)N(t)Bu)}AlMe](2) (2) has been isolated via fractional recrystalliztion in 30% yield. Similarly, reacting AlMe(3) with two equiv. of C(4)H(3)NH(2-CH(2)NH(t)Bu) generates [C(4)H(3)N(2-CH(2)NH(t)Bu)](2)AlMe (3) in a moderate yield. Furthermore, complex 1 can be transformed to an aluminium alkoxide derivative, [C(4)H(3)N(2-CH(2)NH(t)Bu)][OC(6)H(2)(-2,6-(t)Bu(2)-4-Me)]AlMe (4) by reacting 1 with one equiv. of HOC(6)H(2)(-2,6-(t)Bu(2)-4-Me) in toluene via the elimination of one equiv. of methane. The reaction of AlR(3) with one equiv. of [C(4)H(2)NH(2,5-CH(2)NH(t)Bu)(2)] in toluene at room temperature affords [C(4)H(2)N(2,5-CH(2)NH(t)Bu)(2)]AlR(2) (5, R = Me; 6, R = Et) in moderate yield. Surprisingly, from the reaction of two equiv. of [C(4)H(2)NH(2,5-CH(2)NH(t)Bu)(2)] with LiAlH(4) in diethyl ether at 0 °C, a novel complex, [C(4)H(2)N(2-CH(2)N(t)Bu)(5-CH(2)NH(t)Bu)](2)AlLi (7) has been isolated after repeating re-crystallization. Furthermore, reacting one equiv. of C(4)H(2)NH(2,5-CH(2)NH(t)Bu)(2) with AlH(3)·NMe(3) in diethyl ether generates an aluminium dihydride complex, [C(4)H(2)N(2,5-CH(2)NH(t)Bu)(2)]AlH(2) (8), in high yield. Additionally, treating 8 with one equiv. of HOC(6)H(2)(-2,6-(t)Bu(2)-4-Me) in methylene chloride produces [C(4)H(2)N(2,5-CH(2)NH(t)Bu)(2)][OC(6)H(2)(-2,6-(t)Bu(2)-4-Me)]AlH (9) with the elimination of one equiv. of H(2). The aluminium alkoxide complex 4 shows moderate reactivity toward the ring opening polymerization of ε-caprolatone in toluene.     

Structure and Properties of [Fe(4)S(4){2,6-bis(acylamino)benzenethiolato-S}(4)](2)(-) and [Fe(2)S(2){2,6-bis(acylamino)benzenethiolato-S}(4)](2)(-): Protection of the Fe-S Bond by Double NH.S Hydrogen Bonds

Iron-sulfur clusters containing a singly or doubly NH.S hydrogen-bonded arenethiolate ligand, [Fe(4)S(4)(S-2-RCONHC(6)H(4))(4)](2)(-) (R = CH(3), t-Bu, CF(3)), [Fe(4)S(4){S-2,6-(RCONH)(2)C(6)H(3)}(4)](2)(-), [Fe(2)S(2)(S-2-RCONHC(6)H(4))(4)](2)(-) (R = CH(3), t-Bu, CF(3)), and [Fe(2)S(2){S-2,6-(RCONH)(2)C(6)H(3)}(4)](2)(-), were synthesized as models of bacterial [4Fe-4S] and plant-type [2Fe-2S] ferredoxins. The X-ray structures and IR spectra of (PPh(4))(2)[Fe(4)S(4){S-2,6-(CH(3)CONH)(2)C(6)H(3)}(4)].2CH(3)CN and (NEt(4))(2)[Fe(2)S(2){S-2,6-(t-BuCONH)(2)C(6)H(3)}(4)] indicate that the two amide NH groups at the o,o'-positions are directed to the thiolate sulfur atom and form double NH.S hydrogen bonds. The NH.S hydrogen bond contributes to the positive shift of the redox potential of not only (Fe(4)S(4))(+)/(Fe(4)S(4))(2+) but also (Fe(4)S(4))(2+)/(Fe(4)S(4))(3+) in the [4Fe-4S] clusters as well as (Fe(2)S(2))(2+)/(Fe(2)S(2))(3+) in the [2Fe-2S] clusters. The doubly NH.S hydrogen-bonded thiolate ligand effectively prevents the ligand exchange reaction by benzenethiol because the two amide NH groups stabilize the thiolate by protection from dissociation.     

Tandem pseudopericyclic reactions: [1,5]-X sigmatropic shift/6pi-electrocyclic ring closure converting N-(2-X-carbonyl)phenyl ketenimines into 2-X-quinolin-4(3H)-ones

N-(2-X-Carbonyl)phenyl ketenimines undergo, under mild thermal conditions, [1,5]-migration of the X group from the carbonyl carbon to the electron-deficient central carbon atom of the ketenimine fragment, followed by a 6pi-electrocyclic ring closure of the resulting ketene to provide 2-X-substituted quinolin-4(3H)-ones in a sequential one-pot manner. The X groups tested are electron-donor groups, such as alkylthio, arylthio, arylseleno, aryloxy, and amino. When involving alkylthio, arylthio, and arylseleno groups, the complete transformation takes place in refluxing toluene, whereas for aryloxy and amino groups the starting ketenimines must be heated at 230 degrees C in a sealed tube in the absence of solvent. The mechanism for the conversion of these ketenimines into quinolin-4(3H)-ones has been studied by ab initio and DFT calculations, using as model compounds N-(2-X-carbonyl)vinyl ketenimines bearing different X groups (X = F, Cl, OH, SH, NH(2), and PH(2)) converting into 4(3H)-pyridones. This computational study afforded two general reaction pathways for the first step of the sequence, the [1,5]-X shift, depending on the nature of X. When X is F, Cl, OH, or SH, the migration occurs in a concerted mode, whereas when X is NH(2) or PH(2), it involves a two-step sequence. The order of migratory aptitudes of the X substituents at the acyl group is predicted to be PH(2) > Cl > SH > NH(2) > F> OH. The second step of the full transformation, the 6pi-electrocyclic ring closure, is calculated to be concerted and with low energy barriers in all the cases. We have included in the calculations an alternative mode of cyclization of the N-(2-X-carbonyl)vinyl ketenimines, the 6pi-electrocyclic ring closure leading to 1,3-oxazines that involves its 1-oxo-5-aza-1,3,5-hexatrienic system. Additionally, the pseudopericyclic topology of the transition states for some of the [1,5]-X migrations (X = F, Cl, OH, SH), for the 6pi-electrocyclization of the ketene intermediates to the 4(3H)-pyridones, and for the 6pi-electrocyclization of the starting ketenimines into 1,3-oxazines could be established on the basis of their geometries, natural bond orbital analyses, and magnetic properties. The calculations predict that the 4(3H)-pyridones are the thermodynamically controlled products and that the 1,3-oxazines should be the kinetically controlled ones.     

Vanadium complexes of the N(CH2CH2S)3(3-) and O(CH2CH2S)2(2-) ligands with coligands relevant to nitrogen fixation processes

Vanadium(III) and vanadium(V) complexes derived from the tris(2-thiolatoethyl)amine ligand [(NS3)3-] and the bis(2-thiolatoethyl)ether ligand [(OS2)2-] have been synthesized with the aim of investigating the potential of these vanadium sites to bind dinitrogen and activate its reduction. Evidence is presented for the transient existence of (V(NS3)(N2)V(NS3), and a series of mononuclear complexes containing hydrazine, hydrazide, imide, ammine, organic cyanide, and isocyanide ligands has been prepared and the chemistry of these complexes investigated. [V(NS3)O] (1) reacts with an excess of N2H4 to give, probably via the intermediates (V(NS3)(NNH2) (2a) and (V(NS3)(N2)V(NS3) (3), the V(III) adduct [V(NS3)(N2H4)] (4). If 1 is treated with 0.5 mol of N2H4, 0.5 mol of N2 is evolved and green, insoluble [(V(NS3))n] (5) results. Compound 4 is converted by disproportionation to [V(NS3)(NH3)] (6), but 4 does not act as a catalyst for disproportionation of N2H4 nor does it act as a catalyst for its reduction by Zn/HOC6H3Pri2-2,6. Compound 1 reacts with NR1(2)NR2(2) (R1 = H or SiMe3; R2(2) = Me2, MePh, or HPh) to give the hydrazide complexes [V(NS3)(NNR2(2)] (R2(2) = Me2, 2b; R2(2) = MePh, 2c; R2(2) = HPh, 2d), which are not protonated by anhydrous HBr nor are they reduced by Zn/HOC6H3Pri2-2,6. Compound 2b can also be prepared by reaction of [V(NNMe2)(dipp)3] (dipp = OC6H3Pri2-2,6) with NS3H3. N2H4 is displaced quantitatively from 4 by anions to give the salts [NR3(4)][V(NS3)X] (X = Cl, R3 = Et, 7a; X = Cl, R3 = Ph, 7b; X = Br, R3 = Et, 7c; X = N3, R3 = Bu(n), 7d; X = N3, R3 = Et, 7e; X = CN, R3 = Et, 7f). Compound 6 loses NH3 thermally to give 5, which can also be prepared from [VCl3(THF)3] and NS3H3/LiBun. Displacement of NH3 from 6 by ligands L gives the adducts [V(NS3)(L)] (L = MeCN, nu CN 2264 cm-1, 8a; L = ButNC, nu NC 2173 cm-1, 8b; L = C6H11NC, nu NC 2173 cm-1, 8c). Reaction of 4 with N3SiMe3 gives [V(NS3)(NSiMe3)] (9), which is converted to [V(NS3)(NH)] (10) by hydrolysis and to [V(NS3)(NCPh3)] (11) by reaction with ClCPh3. Compound 10 is converted into 1 by [NMe4]OH and to [V(NS3)NLi(THF)2] (12) by LiNPri in THF. A further range of imido complexes [V(NS3)(NR4)] (R4 = C6H4Y-4 where Y = H (13a), OMe (13b), Me (13c), Cl (13d), Br (13e), NO2 (13f); R4 = C6H4Y-3, where Y = OMe (13g); Cl (13h); R4 = C6H3Y2-3,4, where Y = Me (13i); Cl (13j); R4 = C6H11 (13k)) has been prepared by reaction of 1 with R4NCO. The precursor complex [V(OS2)O(dipp)] (14) [OS2(2-) = O(CH2CH2S)2(2-)] has been prepared from [VO(OPri)3], Hdipp, and OS2H2. It reacts with NH2NMe2 to give [V(OS2)(NNMe2)(dipp)] (15) and with N3SiMe3 to give [V(OS2)(NSiMe3)(dipp)] (16). A second oxide precursor, formulated as [V(OS2)1.5O] (17), has also been obtained, and it reacts with SiMe3NHNMe2 to give [V(OS2)(NNMe2)(OSiMe3)] (18). The X-ray crystal structures of the complexes 2b, 2c, 4, 6, 7a, 8a, 9, 10, 13d, 14, 15, 16, and 18 have been determined, and the 51V NMR and other spectroscopic parameters of the complexes are discussed in terms of electronic effects.     

Determination of the rate constants for the NH2(X2B1) + NH2(X2B1) and NH2(X2B1) + H Recombination reactions with collision partners CH4, C2H6, CO2, CF4, and SF6 at low pressures and 296 K. Part 2

The recombination rate constants for the reactions NH2(X2B1) + NH2(X2B1) + M → N2H4 + M and NH2(X2B1) + H + M → NH3 + M, where M was CH4, C2H6, CO2, CF4, or SF6, were measured in the same experiment over presseure ranges of 1-20 and 7-20 Torr, respectively, at 296 ± 2 K. The NH2 radical was produced by the 193 nm laser photolysis of NH3. Both NH2 and NH3 were monitored simultaneously following the photolysis laser pulse. High-resolution time-resolved absorption spectroscopy was used to monitor the temporal dependence of both species: NH2 on the (1)2(21) ← (1)3(31) rotational transition of the (0,7,0)A2A1 ← (0,0,0)X2B1 electronic transition near 675 nm and NH3 in the IR on either of the inversion doublets of the qQ3(3) rotational transition of the ν1 fundamental near 2999 nm. The NH2 self-recombination clearly exhibited falloff behavior for the third-body collision partners used in this work. The pressure dependences of the NH2 self-recombination rate constants were fit using Troe’s parametrization scheme, k(inf), k(0), and F(cent), with k(inf) = 7.9 × 10(-11) cm3 molecule(-1) s(-1), the theoretical value calculated by Klippenstein et al. (J. Phys. Chem. A113, 113, 10241). The individual Troe parameters were CH4, k(0)(CH4) = 9.4 × 10(-29) and F(cent)(CH4) = 0.61; C2H6, k(0)(C2H6) = 1.5 × 10(-28) and F(cent)(C2H6) = 0.80; CO2, k(0)(CO2) = 8.6 × 10(-29) and F(cent)(CO2) = 0.66; CF4, k(0)(CF4) = 1.1 × 10(-28) and F(cent)(CF4) = 0.55; and SF6, k(0)(SF6) = 1.9 × 10(-28) and F(cent)(SF6) = 0.52, where the units of k0 are cm6 molecule(-2) s(-1). The NH2 + H + M reaction rate constant was assumed to be in the three-body pressure regime, and the association rate constants were CH4, (6.0 ± 1.8) × 10(-30); C2H6, (1.1 ± 0.41) × 10(-29); CO2, (6.5 ± 1.8) × 10(-30); CF4, (8.3 ± 1.7) × 10(-30); and SF6, (1.4 ± 0.30) × 10(-29), with units cm6 molecule(-1) s,(-1) and the systematic and experimental errors are given at the 2σ confidence level.