High-resolution EXAFS of the active site of human sulfite oxidase: comparison with density functional theory and X-ray crystallographic results

Much of our knowledge about molybdenum enzymes has originated from EXAFS spectroscopy. This technique provides excellent bond-length accuracy but has only limited bond-length resolution. We have used EXAFS spectroscopy with an extended data range in an attempt to improve bond-length resolution for the molybdenum enzyme sulfite oxidase. The Mo site of sulfite oxidase has two oxygen and three Mo-S ligands (two from cofactor dithiolene plus a cysteine). For the oxidized (Mo(VI)) enzyme, we find that the three Mo-S bond lengths are very similar (within 0.05 A) at 2.41 A, as are the Mo=O ligands at 1.72 A. Density functional theory shows that this is consistent with the proposed active-site structure. The reduced (Mo(IV)) enzyme shows two Mo-S bond lengths at 2.35 A and one at 2.41 A (assigned to cofactor dithiolene and cysteine, respectively, from DFT), together with one Mo=O at 1.72 A and one Mo-OH(2) at 2.30 A.     

Molybdenum site structure of Escherichia coli YedY, a novel bacterial oxidoreductase

We report a structural characterization using X-ray absorption spectroscopy of the molybdenum site of Escherichia coli YedY, a novel oxidoreductase related to be the sulfite oxidase family of molybdenum enzymes. We find that the enzyme can exist in Mo(V) and Mo(IV) oxidation states but cannot be readily oxidized to the Mo(VI) form. Mo(V) YedY has molybdenum coordination similar to that of sulfite oxidase, with one Mo═O at 1.71 ?, three Mo-S at 2.39 ?, and one Mo-OH at 2.09 ?, which elongates to 2.20 ? upon reduction to Mo(IV), indicating Mo-OH(2) coordination. The Mo(V) enzyme also possesses a long Mo-O coordination at 2.64 ?, which may be due to oxygen coordination by Asn-45 O(δ), with Mo-O(δ) approximately trans to the Mo═O group. A comparison with sulfite oxidase indicates that YedY possesses a much more uniform Mo-S coordination, with a maximum permitted deviation of less than 0.05 ?. Our results indicate that the YedY active site shows considerable similarity to but also important differences from that of reduced forms of sulfite oxidase.     

X-ray crystal structure of arsenite-inhibited xanthine oxidase: μ-sulfido,μ-oxo double bridge between molybdenum and arsenic in the active site

Xanthine oxidoreductase is a molybdenum-containing enzyme that catalyzes the hydroxylation reaction of sp(2)-hybridized carbon centers of a variety of substrates, including purines, aldehydes, and other heterocyclic compounds. The complex of arsenite-inhibited xanthine oxidase has been characterized previously by UV-vis, electron paramagnetic resonance, and X-ray absorption spectroscopy (XAS), and the catalytically essential sulfido ligand of the square-pyrimidal molybdenum center has been suggested to be involved in arsenite binding through either a μ-sulfido,μ-oxo double bridge or a single μ-sulfido bridge. However, this is contrary to the crystallographically observed single μ-oxo bridge between molybdenum and arsenic in the desulfo form of aldehyde oxidoreductase from Desulfovibrio gigas (an enzyme closely related to xanthine oxidase), whose molybdenum center has an oxo ligand replacing the catalytically essential sulfur, as seen in the functional form of xanthine oxidase. Here we use X-ray crystallography to characterize the molybdenum center of arsenite-inhibited xanthine oxidase and solve the structures of the oxidized and reduced inhibition complexes at 1.82 and 2.11 ? resolution, respectively. We observe μ-sulfido,μ-oxo double bridges between molybdenum and arsenic in the active sites of both complexes. Arsenic is four-coordinate with a distorted trigonal-pyramidal geometry in the oxidized complex and three-coordinate with a distorted trigonal-planar geometry in the reduced complex. The doubly bridged binding mode is in agreement with previous XAS data indicating that the catalytically essential sulfur is also essential for the high affinity of reduced xanthine oxidoreductase for arsenite.     

Nature of the catalytically labile oxygen at the active site of xanthine oxidase

In this paper we report the results of molybdenum K-edge X-ray absorption studies performed on the oxidized active site of xanthine oxidase at pH 6 and 10. These results indicate that the active site possesses one terminal oxygen ligand (Mo=O), two thiolate ligands (Mo-S), one terminal sulfido ligand (Mo=S), and one Mo-OH moiety. EXAFS analysis demonstrates that the Mo-OH bond shortens from 1.97 A at pH 6 to 1.75 A at pH 10, which is consistent with the generation of a Mo-O- moiety. This study provides convincing structural evidence that the catalytic oxygen donor at the oxidized active site of xanthine oxidase is Mo-OH rather than the Mo-OH2 ligation previously suggested by X-ray crystallography. These results support a mechanism initiated by base-assisted nucleophilic attack of the substrate by Mo-OH.     

Geometrical control of the active site electronic structure of pyranopterin enzymes by metal-dithiolate folding: aldehyde oxidase

Density functional calculations on geometry-optimized oxidized (Mo(VI)) and reduced (Mo(IV)) analogues of the isolated active site of aldehyde oxidase (MOP), a member of the xanthine oxidase family of pyranopterindithiolate enzymes, show that fold angle changes of the dithiolate ligand modulate the relative metal and dithiolate contributions to the frontier redox orbitals. Proton abstraction from the equatorial aqua ligand of the oxidized Mo(VI) site also flattens the metal dithiolate fold angle. It is proposed that static and/or dynamic changes in the structure of the protein surrounding the active site can induce changes in the dithiolate fold angle and thereby provide a mechanism for electronic buffering of the redox orbital, for fine-tuning the nucleophilicity of the equatorial aqua/hydroxide ligand, and for modulating the electron-transfer regeneration of the active sites of molybdenum and tungsten enzymes via a "dithiolate folding effect".     

Structure of the molybdenum site in YedY, a sulfite oxidase homologue from Escherichia coli

YedY from Escherichia coli is a new member of the sulfite oxidase family of molybdenum cofactor (Moco)-containing oxidoreductases. We investigated the atomic structure of the molybdenum site in YedY by X-ray absorption spectroscopy, in comparison to human sulfite oxidase (hSO) and to a Mo(IV) model complex. The K-edge energy was indicative of Mo(V) in YedY, in agreement with X- and Q-band electron paramagnetic resonance results, whereas the hSO protein contained Mo(VI). In YedY and hSO, molybdenum is coordinated by two sulfur ligands from the molybdopterin ligand of the Moco, one thiolate sulfur of a cysteine (average Mo-S bond length of ～2.4 ?), and one (axial) oxo ligand (Mo═O, ～1.7 ?). hSO contained a second oxo group at Mo as expected, but in YedY, two species in about a 1:1 ratio were found at the active site, corresponding to an equatorial Mo-OH bond (～2.1 ?) or possibly to a shorter Mo-O(-) bond. Yet another oxygen (or nitrogen) at a ～2.6 ? distance to Mo in YedY was identified, which could originate from a water molecule in the substrate binding cavity or from an amino acid residue close to the molybdenum site, i.e., Glu104, that is replaced by a glycine in hSO, or Asn45. The addition of the poor substrate dimethyl sulfoxide to YedY left the molybdenum coordination unchanged at high pH. In contrast, we found indications that the better substrate trimethylamine N-oxide and the substrate analogue acetone were bound at a ～2.6 ? distance to the molybdenum, presumably replacing the equatorial oxygen ligand. These findings were used to interpret the recent crystal structure of YedY and bear implications for its catalytic mechanism.     

X-ray crystal structure and EPR spectra of "arsenite-inhibited" Desulfovibriogigas aldehyde dehydrogenase: a member of the xanthine oxidase family

X-ray crystallography has been used to determine the structure of arsenite-inhibited aldehyde dehydrogenase from Desulfovibrio gigas, a member of the xanthine oxidase family of mononuclear molybdenum enzymes. The structure shows an AsO3 moiety bound to the molybdenum atom of the active site through one of the oxygen atoms. A reduced sample of arsenite-inhibited aldehyde dehydrogenase has a Mo(V) signal that shows anisotropic hyperfine and quadrupole coupling to one arsenic atom. This signal has a strong resemblance with a previously reported signal for arsenite-inhibited xanthine oxidase.     

Nature of halide binding to the molybdenum site of sulfite oxidase

Valuable information on the active sites of molybdenum enzymes has been provided from both Mo(V) electron paramagnetic resonance (EPR) spectroscopy and X-ray absorption spectroscopy (XAS). One of three major categories of Mo(V) EPR signals from the molybdenum enzyme sulfite oxidase is the low-pH signal, which forms in the presence of chloride. Two alternative structures for this species have been proposed, one in which the chloride is coordinated directly to Mo and a second in which chloride is held in the arginine-rich basic pocket some 5 ? from Mo. Here we present an independent assessment of the structure of this species by using XAS of the analogous bromide and iodide complexes. We show that there is no evidence of direct Mo-I coordination, and that the data are consistent with a structure in which the halide is bound at ～5 ? from Mo.     

MoV electron paramagnetic resonance of sulfite oxidase revisited: the low-pH chloride signal

Valuable information on the active sites of molybdenum enzymes has been provided by Mo(V) electron paramagnetic resonance (EPR) spectroscopy. In recent years, multiple resonance techniques have been extensively used to examine details of the active-site structure, but basic continuous-wave (CW) EPR has not been re-evaluated in several decades. Here, we present a re-examination of the CW EPR spectroscopy of the sulfite oxidase low-pH chloride species and provide evidence for direct coordination of molybdenum by chloride.     

Coordination chemistry at the molybdenum site of sulfite oxidase: redox-induced structural changes in the cysteine 207 to serine mutant

The redox chemistry of the molybdenum site of the C207S mutant of recombinant human sulfite oxidase has been studied via potentiometric titrations employing both electron paramagnetic resonance (EPR) spectroscopy and X-ray absorption spectroscopy (XAS) as probes of the active site structure. In earlier EXAFS studies, oxidized Cys207Ser enzyme has been shown to possess a novel tri-oxo active site, in which Ser207 does not appear to be a ligand to Mo [George, G. N.; Garrett, R. M.; Prince, R. C.; Rajagopalan, K. V. J. Am. Chem. Soc. 1996, 118, 8588-8592]. Redox titrations show that the active site is modified under reducing conditions to a mono-oxo Mo(IV) species, probably with Ser207 ligated to the metal. The Mo(IV) species can be reoxidized to a mono-oxo Mo(V) species still coordinated to Ser207, which in turn can be further reoxidized to yield the initial tri-oxo Mo(VI) structure with loss of Ser207 ligation.     

Intramolecular electron transfer in a bacterial sulfite dehydrogenase

Sulfite dehydrogenase (SDH) from Starkeya novella, a sulfite-oxidizing molybdenum-containing enzyme, has a novel tightly bound alphabeta-heterodimeric structure in which the Mo cofactor and the c-type heme are located on different subunits. Flash photolysis studies of intramolecular electron transfer (IET) in SDH show that the process is first-order, independent of solution viscosity, and not inhibited by sulfate, which strongly indicates that IET in SDH proceeds directly through the protein medium and does not involve substantial movement of the two subunits relative to each other. The IET results for SDH contrast with those for chicken and human sulfite oxidase (SO) in which the molybdenum domain is linked to a b-type heme domain through a flexible loop, and IET shows a remarkable dependence on sulfate concentration and viscosity that has been ascribed to interdomain docking. The results for SDH provide additional support for the interdomain docking hypothesis in animal SO and clearly demonstrate that dependence of IET on viscosity and sulfate is not an inherent property of all sulfite-oxidizing molybdenum enzymes.     

Monodithiolene molybdenum(V, VI) complexes: a structural analogue of the oxidized active site of the sulfite oxidase enzyme family

The active sites of the xanthine oxidase and sulfite oxidase enzyme families contain one pterin-dithiolene cofactor ligand bound to a molybdenum atom. Consequently, monodithiolene molybdenum complexes have been sought by exploratory synthesis for structural and reactivity studies. Reaction of [MoO(S(2)C(2)Me(2))(2)](1-) or [MoO(bdt)(2)](1-) with PhSeCl results in removal of one dithiolate ligand and formation of [MoOCl(2)(S(2)C(2)Me(2))](1-) (1) or [MoOCl(2)(bdt)](1-) (2), which undergoes ligand substitution reactions to form other monodithiolene complexes [MoO(2-AdS)(2)(S(2)C(2)Me(2))](1-) (3), [MoO(SR)(2)(bdt)](1-) (R = 2-Ad (4), 2,4,6-Pr(i)(3)C(6)H(2) (5)), and [MoOCl(SC(6)H(2)-2,4,6-Pr(i)(3))(bdt)](1-) (6) (Ad = 2-adamantyl, bdt = benzene-1,2-dithiolate). These complexes have square pyramidal structures with apical oxo ligands, exhibit rhombic EPR spectra, and 3-5 are electrochemically reducible to Mo(IV)O species. Complexes 1-6 constitute the first examples of five-coordinate monodithiolene Mo(V)O complexes; 6 approaches the proposed structure of the high-pH form of sulfite oxidase. Treatment of [MoO(2)(OSiPh(3))(2)] with Li(2)(bdt) in THF affords [MoO(2)(OSiPh(3))(bdt)](1-) (8). Reaction of 8 with 2,4,6-Pr(i)(3)C(6)H(2)SH in acetonitrile gives [MoO(2)(SC(6)H(2)-2,4,6-Pr(i)(3))(bdt)](1-) (9, 55%). Complexes 8 and 9 are square pyramidal with apical and basal oxo ligands. With one dithiolene and one thiolate ligand of a square pyramidal Mo(VI)O(2)S(3) coordination unit, 9 closely resembles the oxidized sites in sulfite oxidase and assimilatory nitrate reductase as deduced from crystallography (sulfite oxidase) and Mo EXAFS. The complex is the first structural analogue of the active sites in fully oxidized members of the sulfite oxidase family. This work provides a starting point for the development of both structural and reactivity analogues of members of this family.     

Structure of the active site of sulfite dehydrogenase from Starkeya novella

In this paper, we report the results of molybdenum K-edge X-ray absorption studies performed on the oxidized and reduced active sites of the sulfite dehydrogenase from Starkeya novella. Our results provide the first direct structural information on the active site of the oxidized form of this enzyme and confirm the conclusions derived from protein crystallography that the molybdenum coordination is analogous to that of the sulfite oxidases. The molybdenum atom of the oxidized enzyme is bound by two Mo=O ligands at 1.73 A and three thiolate Mo-S ligands at 2.42 A, whereas the reduced enzyme has one oxo at 1.74 A, one long oxygen at 2.19 A (characteristic of Mo-OH2), and three Mo-S ligands at 2.40 A.     

Resonance Raman spectroscopy of nitric oxide reductase and cbb(3) heme-copper oxidase

Elucidating the structure and properties of the active sites in cbb3 heme-copper oxidase and in nitric oxide reductase (Nor) is crucial in understanding the reaction mechanisms of oxygen and nitric oxide reduction by both enzymes. In the work here, we have applied resonance Raman (RR) spectroscopy to investigate the structure and properties of the binuclear heme b3-CuB center of cbb3 heme-copper oxidase from Pseudomonas stutzeri and the dinuclear heme b3-FeB center of Nor from Paracoccus denitrificans in the ligand-free and CO-bound forms and in the reactions with O2 and NO. The RR data demonstrate that in the Nor/NO reaction, the formation of the N-N bond occurs with the His-Fe heme b3 bond intact, and reformation of the heme b3-O-FeB dinuclear center causes the rupture of the proximal His-Fe heme b3 bond. In the reactions of Nor and cbb3 with O2, distinct oxidized heme b3 species, which differ from the as-isolated oxidized forms, have been characterized. The activation and reduction of O2 and NO by cbb3 oxidase and nitric oxide reductase are compared and discussed.     

Synthesis and Crystal Structure of the Copper Complex of 7，16-Bis（2-hyd roxy-5-met hylbenzyl）-1,4,10,13-tetraoxa-7,16-diazacyclooctadecane

A lariat crown ether ligand 7,16-bis (2-hydroxy-5-methylbenzyl)- 1,4,10,13-tetraoxa-7,16-diazacyclooctadeeane (L1) has been prepared via one-pot Mannich reaction. Its copper(Ⅱ) complex Cu-L1 was synthesized and characterized by elemental analysis, IR and UV-visible spectroscopy. The crystal structure of the complex has been determined by X-ray diffraction analysis. The result shows that the copper(Ⅱ) ion is six-coordinated by two nitrogen and four oxygen atoms, two from the crown ether and the other two from the deprotonated phenolate anions, forming an elongated octahedral complex. Electrochemical study indicates that the complex undergoes reversible reduction in DMF solution.     

Pulsed EPR investigations of systems modeling molybdenum enzymes: hyperfine and quadrupole parameters of oxo-17O in [Mo 17O(SPh)4]-

Ka band ESEEM spectroscopy was used to determine the hyperfine (hfi) and nuclear quadrupole (nqi) interaction parameters for the oxo-17O ligand in [Mo 17O(SPh)4]-, a spectroscopic model of the oxo-Mo(V) centers of enzymes. The isotropic hfi constant of 6.5 MHz found for the oxo-17O is much smaller than the values of approximately 20-40 MHz typical for the 17O nucleus of an equatorial OH(2) ligand in molybdenum enzymes. The 17O nqi parameter (e2qQ/h = 1.45 MHz, eta approximately = 0) is the first to be obtained for an oxo group in a metal complex. The parameters of the oxo-17O ligand, as well as other magnetic resonance parameters of [Mo 17O(SPh)4]- predicted by quasi-relativistic DFT calculations, were in good agreement with those obtained in experiment. From the electronic structure of the complex revealed by DFT, it follows that the SOMO is almost entirely molybdenum d(xy) and sulfur p, while the spin density on the oxo-17O is negative, determined by spin polarization mechanisms. The results of this work will enable direct experimental identification of the oxo ligand in a variety of chemical and biological systems.     

Modified active site coordination in a clinical mutant of sulfite oxidase

The molybdenum site of the Arginine 160 --> Glutamine clinical mutant of the physiologically vital enzyme sulfite oxidase has been investigated by a combination of X-ray absorption spectroscopy and density functional theory calculations. We conclude that the mutant enzyme has a six-coordinate pseudo-octahedral active site with coordination of Glutamine Oepsilon to molybdenum. This contrasts with the wild-type enzyme which is five-coordinate with approximately square-based pyramidal geometry. This difference in the structure of the molybdenum site explains many of the properties of the mutant enzyme which have previously been reported.     

X-ray absorption spectroscopic characterization of the molybdenum site of Escherichia coli dimethyl sulfoxide reductase

Structural studies of dimethyl sulfoxide (DMSO) reductases were hampered by modification of the active site during purification. We report an X-ray absorption spectroscopic analysis of the molybdenum active site of Escherichia coli DMSO reductase contained within its native membranes. The enzyme in these preparations is expected to be very close to the form found in vivo. The oxidized active site was found to have four Mo-S ligands at 2.43 A, one Mo=O at 1.71 A, and a longer Mo-O at 1.90 A. We conclude that the oxidized enzyme is a monooxomolybdenum(VI) species coordinated by two molybdopterin dithiolenes and a serine. The bond lengths determined for E. coli DMSO reductase are very similar to those determined for the well-characterized Rhodobacter sphaeroides DMSO reductase, suggesting similar active site structures for the two enzymes. Furthermore, our results suggest that the form found in vivo is the monooxobis(molybdopterin) species.