Aspects of “low field” magnetotransport in epitaxial thin films of the ferromagnetic metallic oxide SrRuO3

Epitaxial thin films of the conductive ferromagnetic oxide SrRuO₃ were grown on an (0 0 1) SrTiO₃ (STO) substrate by using DC sputtering technique. The magnetic and magnetoresistive properties of the films were measured by applying the magnetic field both perpendicular (out-of-plane) and parallel (in-plane) to the film plane and ever maintaining the direction of the applied field perpendicular to that of the transport current. The films grown on an (0 0 1) STO substrate showed identical magnetization properties in two orthogonal crystallographic directions of the substrate, [1 0 0]_S and [0 0 1]_S (in-plane and out-of-plane geometry), which suggests the presence of a multi domain structure within the plane of the film. For such samples, no anisotropic field (hard axis) along de [0 0 1]s direction, i.e., perpendicular to the film-plane could be detected. Nevertheless, a distinguishable temperature dependent out-of-plane anisotropic magnetoresistance (MR) along with strong temperature dependent low field hysteretic MR(H) behavior was detected for the studied films. A negative MR ratio MR(T)=[ρ(μ₀H=9 T; T)−ρ( μ₀H=0 T; T)]/ρ( μ₀H=0 T; T) on the order of a few percent, with maximums of 6% and 4% (right at the Curie temperature, T_C 160 K) was calculated for an in-plane and out-of plane measuring geometry, respectively. In addition there is an equally strong MR effect at low temperatures, which might be related to the temperature dependence of the magnetocrystalline anisotropy together with a magnetization rotation. Both the MR(T) behavior and the achieved values (except for T<30 K) are similar to those obtained on SrRuO₃ films grown on 2° miscut (0 0 1) STO substrates with the current parallel to the field and parallel to the direction, which was identified as the easier axis for magnetization.     

Magnetic anisotropy of Fe films on GaAs(113)A substrates

We employ superconducting quantum interference device magnetometry to study the thickness dependence of in-plane and out-of-plane magnetic anisotropic properties of Fe films grown on high-index GaAs(113)A substrates by molecular beam epitaxy. The evolution of the in-plane magnetic anisotropy with film thickness is distinguished into two regions. First, for Fe film thicknesses ≤50 MLs, we observe an in-plane uniaxial magnetic anisotropy with the easy axis along the in-plane 〈332̄〉 axes. Second, for Fe film thicknesses ≥70 MLs, we observe a four-fold magnetic anisotropy with the easy axis along the in-plane 〈031̄〉 axes. The existence of an out-of-plane perpendicular magnetic anisotropy is also detected in ultrathin Fe films. Similar to Fe on GaAs(001), our results provide evidence for the interfacial origin of the in-plane uniaxial and out-of-plane perpendicular magnetic anisotropy. Both the uniaxial and the perpendicular interface anisotropy are found to be independent of the epitaxial orientation and are hence an intrinsic property of the Fe/GaAs interface. PACS 75.70.-i; 75.50.Bb; 81.15.Hi     

Angular dependence of the in-plane magnetization of (100) Cu/Ni/Cu structures

(100) Cu/Ni/Cu sandwich structures have been deposited on (100) Si using the (100) Cu epitaxially grown as the seed layer. The in-plane epitaxial relation between the metal films and Si allows the study of angular dependence of the magnetization for the field parallel to the film plane. Keeping the Cu layers at 1000 Å each and varying the Ni layers between 50 and 1000 Å, the magnetization along the [110] edge is larger than that along the [100] one. This is observed for both structures with a Ni thickness of 1000 and 500 Å, respectively. For the thinner Ni layers, the angular dependence is interfered by the reversal in magnetic anisotropy reported earlier. For such structures, a squared hysteresis loop is observed for the field perpendicular to the film plane, whereas one with little loop is observed for the in-plane magnetization. The angular dependence observed for the 1000 and 500 Å Ni films is the same as that of single crystal Ni. The (100) Cu/Ni/Cu films thus grown can be used for other magnetic measurements in the exploration of two-dimensional magnetism with controlled orientations.     

Reorientational transition and stripe domains in Co films

We have grown, by sputtering, Co films on (1 1 1) Si substrate, with the aim to find the critical thickness of the reorientational transition of the magnetization from the plane to out of the plane as the hcp axis is oriented perpendicular to the film. Stripe Domains (SD) by Magnetic Force Microscopy, characteristic signature of Perpendicular Magnetic Anisotropy, have been found only in samples grown in some series while samples grown with the same growth parameters do not show stripe domains, indicating an in-plane orientation of the magnetization. These apparently controversial results will be explained in terms of the system fundamental parameters, magnetization, exchange stiffness constant and perpendicular magnetic anisotropy of the sample, which play a crucial role especially in Co films.     

Transition of magnetic anisotropy in Ni/GaAs (0 0 1) observed by magnetization and ferromagnetic resonance

Polycrystalline thin Ni films deposited onto GaAs (0 0 1) show a transition of the magnetic anisotropy depending on its thickness. The anisotropy is perpendicular to the film plane for the thicknesses of the film ⩽12 nm. This becomes in-plane in the films having thicknesses ⩾15 nm. The films are deposited onto the n-type GaAs (0 0 1) substrate by the usual thermal evaporation method and also by the electron beam evaporation in ultra high vacuum onto a GaAs epilayer in the standard molecular beam epitaxy system. The magnetization and ferromagnetic resonance (FMR) are observed in the temperature range from 4.2 to 300 K. For the discussion of the microscopic origin of the anomalous properties in magnetization and FMR experiments, the experimental results are reviewed by introducing a uniaxial anisotropy, which is calculated from the easy-axis and hard-axis magnetization data. This calculated anisotropy is able to explain the temperature and angle dependency of the FMR spectra of the Ni films. Hence the magnetization and FMR spectra are in agreement with the type of the anisotropy and its temperature dependency. In addition to these, the temperature dependence of the in-plane magnetic anisotropy is able to explain the previously reported anomalous effect of reducing the squareness at low temperatures in Ni/GaAs.     

Growth and characterization of ferromagnetic MnAs films on different semiconductor substrates

MnAs thin films were grown by metalorganic vapour-phase epitaxy (MOVPE) on GaAs(0 0 1), Si(0 0 1) and oxidised silicon substrates. All films are crystalline and contain only the ferromagnetic α-MnAs phase. X-ray diffraction (XRD) and atomic force microscopy (AFM) measurements show that films on GaAs(0 0 1) have strong preferential orientation, developing elongated grains parallel to [1 –1 0] GaAs while films on bare and oxidised Si are polycrystalline with irregular-shaped, randomly oriented grains. Magneto-optic Kerr effect (MOKE) measurements show good magnetic properties for films on GaAs, such as strong in-plane anisotropy and squareness of the hysteresis loop in the easy direction. A Curie temperature of 340 K, remarkably higher than the bulk material (315 K), was found for a 65 nm thick film on GaAs. Films grown on bare and oxidised silicon wafers had lower Curie temperature and were magnetically isotropic.     

L1_0-FePt合金单层磁性薄膜的微磁学模拟

具有四方结构的L10-FePt合金因其具有高磁晶各向异性和良好的化学稳定性而成为超高密度薄膜磁记录介质的最佳选择.对实验制备得到的磁性能良好的垂直取向L10-FePt合金单层膜进行了微磁学分析.在传统微磁学模型的基础上,根据晶体的对称性,引入了四角磁晶各向异性能密度的唯象表达形式;又依据薄膜生长过程中晶格对称性的破坏,考虑了薄膜面内的应力,并引入了磁弹性能.以四角磁晶各向异性能和磁弹性能为重点,对L10-FePt合金单层膜的磁滞回线进行了详细的分析,并且用微磁学方法确定了薄膜面内应力的大小.     

Magnetic properties of oblique-evaporated Co-Ni thin films

Co_{1 - x}Ni_x (x = 0, 0.2 and 0.3) thin films of thickness about 1500 Å were electron-beam evaporated onto silicon and polymide substrates at various oblique angles . In-plane coercivities and squareness ratios both along and transverse to the incidence plane were examined. Also, the angular variations of coercivity of films prepared at = 0 ° to 85 ° were investigated. The magnetic anisotropy changes from an in-plane anisotropy with the easy axis perpendicular to the incidence plane to an out-of-plane anisotropy parallel to the incidence plane, the transition occuring at about 60 °. Also discussed is the effect of the substrate temperature on the magnetic properties and columnar microstructure of the oblique-evaporated films. At room temperature, there is a small drop in coercivity at = 60 ° before a sharp rise in coercivities to 1400 Oe as the oblique angle increases.     

Perpendicular magnetization in Fe/Ni bilayers on GaAs(0 0 1)

Following the concept of spin-injection into a semiconductor-based device, a ferromagnetic element (like a GMR multilayer structure) can be used as a spin filter. A high spin-polarization of the electrons can be realized by the preparation of a monocrystalline multilayer structure consisting of ultrathin films of a high magnetic polarization. In the case of ultrathin films, the manipulation of the easy-axis of magnetization is possible, by changing the anisotropy terms contributing to the effective anisotropy of the structure. We report on the structural and magnetic properties of Ni/Fe and Fe/Ni bilayers epitaxially grown on GaAs(0 0 1). By a proper choice of Fe and Ni sequences (Fe/Ni/GaAs) and their thickness (up to 3 ML of Fe on the top of Ni), the rotation of magnetization from the in-plane to the out-of-plane direction was achieved.     

La<Subscript>0.7</Subscript>Sr<Subscript>0.3</Subscript>MnO<Subscript>3</Subscript> thin films on SrTiO<Subscript>3</Subscript> and CaTiO<Subscript>3</Subscript> buffered Si substrates: structural,static, and dynamic magnetic properties

Nearly 50-nm thick La_0.7Sr_0.3MnO₃ (LSMO) films were grown on Si substrates using molecular beam epitaxy on (001) Si substrates over-layered by a 20 nm thick SrTiO₃ (STO) or by a 20 nm thick CaTiO₃ (CTO) film. In addition, a reference LSMO film was directly deposited on a (001) STO substrate by pulsed laser deposition. For all the samples, X-ray diffraction revealed an excellent epitaxy of the LSMO film and small mosaicity around (001), with in-plane [100] and [010] cubic axes. The LSMO/CTO films are in-plane compressed while the LSMO/STO ones are in-plane extended. The temperature dependence of their static magnetic properties was studied using a SQUID, showing a Curie temperature overpassing 315 K for all the samples. Hysteresis loops performed at room temperature (294 K) with the help of a vibrating sample magnetometer (VSM) are also discussed. At 294 K Micro-strip ferromagnetic resonance (MS-FMR) was used to investigate the dynamic magnetic properties. It allows concluding to a strong anisotropy perpendicular to the films and to a weak fourfold in-plane anisotropy with easy axes along the [110] and [1[`1]0 1\bar{1}0 ] directions. Their values strongly depend on the studied sample and are presumably related to the strains suffered by the films.     

Interface biquadratic coupling and magnon scattering in exchange-biased ferromagnetic thin films grown on epitaxial FeF2

The magnetic anisotropy of ferromagnetic (FM) Ni, Co, and Fe polycrystalline thin films grown on antiferromagnetic (AF) FeF(2)(110) epitaxial layers was studied, as a function of temperature, using ferromagnetic resonance. In addition to an in-plane anisotropy in the FM induced by fluctuations in the AF short-range order, a perpendicular (biquadratic) magnetic anisotropy, with an out-of-plane component, was found which increased with decreasing temperature above the AF Neél temperature (T(N) = 78.4 K). This is a surprising result given that the AF's uniaxial anisotropy axis was in the plane of the sample, but is consistent with prior experimental and theoretical work. The resonance linewidth had a strong dependence on the direction of the external magnetic field with respect to in-plane FeF(2) crystallographic directions, consistent with interface magnon scattering due to defect-induced demagnetizing fields. Below T(N), the exchange bias field H(E) measured via FMR for the Ni sample was in good agreement with H(E) determined from magnetization measurements if the perpendicular out-of-plane anisotropy was taken into account. A low field resonance line normally observed at H ≈ 0, associated with domain formation during magnetization in ferromagnets, coincided with the exchange bias field for T < T(N), indicating domain formation with the in-plane FM magnetization perpendicular to the AF easy axis. Thus, biquadratic FM-AF coupling is important at temperatures below and above T(N).     

Development of magnetic anisotropies in ultrathin epitaxial films of Fe(001) and Ni(001)

Ultrathin films, bcc Fe(001) on Ag(001), fcc Fe(001) on Cu(001) and Fe/Ni(001) bilayers on Ag, were grown by molecular beam epitaxy. A wide range of surface science tools were employed to establish the quality of epitaxial growth. Ferromagnetic resonance and Brillouin light scattering were used to extract the magnetic properties. Emphasis was placed on the study of magnetic anisotropies. Large uniaxial anisotropies with easy axis perpendicular to the film surface were observed in all ultrathin structures studied. These anisotropies were particularly strong in fcc Fe and bcc Fe films. In sufficiently thin samples the saturation magnetization was oriented perpendicularly to the film surface in the absence of an applied field. It has been demonstrated that in bcc Fe films the uniaxial perpendicular anisotropy originates at the film interfaces. In situ measurements indentified the strength of the uniaxial perpendicular anisotropy constant at the Fe/vacuum, Fe/Ag and Fe/Au interfaces asK _us = 0.96, 0.63, and 0.3 ergs/cm² respectively. The surface anisotropies deduced for [bulk Fe/noble metal] interfaces are in good agreement with the values obtained from ultrathin films. Hence the perpendicular surface ansiotropies originate in the broken symmetry at abrupt interfaces. An observed decrease in the cubic anisotropy in bcc Fe ultrathin films has been explained by the presence of a weak 4th order in-plane surface anisotropy,K _1S=0.012 ergs/cm². Fe/Ni bilayers were also investigated. Ni grew in the pure bcc structure for the first 3–6 ML and then transformed to a new structure which exhibited unique magnetic properties. Transformed ultrathin bilayers possessed large inplane 4th order anisotropies far surpassing those observed in bulk Fe and Ni. The large 4th order anisotropies originate in crystallographic defects formed during the Ni lattice transformation.     

Crystal orientation dependence of the in-plane dielectric properties for Ba(Sn0.15Ti0.85)O3 thin films

Barium tin titanate Ba(Sn_0.15Ti_0.85)O₃ (BTS) thin films with (1 0 0), (1 1 0) and (1 1 1) orientation were grown on (1 0 0), (1 1 0) and (1 1 1) LaAlO₃ (LAO) single-crystal substrates through sol–gel process, respectively. The in-plane dielectric properties of the films were measured on interdigital capacitor (IDC). Films with the (1 1 1) orientation had larger relative dielectric constant and larger tunability against the dc bias electric field than (1 0 0)- and (1 1 0)-oriented films. This difference in dielectric properties in these three kinds of oriented BTS films may be attributed due to change in the direction and magnitude of electric polarization in orientation engineered BTS films. This work clearly reveals the dielectric properties of BTS films exhibited a strong sensitivity to crystal orientation.     

Fourfold in-plane magnetic anisotropy in epitaxial Fe(1 1 0)/Cu(0 0 1) and Fe(1 1 0)/Ni(0 0 1) bilayers

Epitaxial Fe(1 1 0) films with thicknesses of 100-800 nm on Cu(0 0 1) and Ni(0 0 1) buffer layers grown on MgO(0 0 1) substrates have been fabricated. These films contain Fe(1 1 0) crystallites which are in the Pitsch orientation relationship. Magnetization and the fourfold in-plane magnetic anisotropy constants of these films have been determined by torque measurements. All the samples under study are characterized by a fourfold magnetic anisotropy with easy axes parallel to the [1 0 0] and [0 1 0] directions of Cu(0 0 1) and Ni(0 0 1) layers. The measured values of the constant for Fe(1 1 0)/Cu(0 0 1) are found to depend on deposition temperature; a maximum value of (2.5±0.1)×10⁵ erg/cm³ is reached after annealing at 600 °С. The in-plane torque measurements on Fe(1 1 0)/Ni(0 0 1) bilayers obtained at 300 °С, on the other hand, exhibit a constant value of (2.7±0.1)×10⁵ erg/cm³. Assuming an exchange interaction between the Fe(1 1 0) crystallites, which are in the Pitsch orientation relationship, the fourfold in-plane magnetic anisotropy has been calculated as 2.8×10⁵ erg/cm³. The deviations of the experimental values from the predicted one may be explained by the formation of a polycrystalline phase within the Fe(1 1 0) layer and a partial disorientation of the epitaxial crystallites.     

Role of crystal orientation on the magnetic properties of CoFe2O4 thin films grown on Si (1 0 0) and Al2O3 (0 0 0 1) substrates using pulsed laser deposition

We report the influence of crystal orientation on the magnetic properties of CoFe₂O₄ (CFO) thin films grown on single crystal Si (1 0 0) and c-cut sapphire (Al₂O₃) (0 0 0 1) substrates using pulsed laser deposition technique. The thickness was varied from 200 to 50 nm for CFO films grown on Si substrates, while it was fixed at 200 nm for CFO films grown on Al₂O₃ substrates. We observed that the 200 and 100 nm thick CFO-Si films grew in both (1 1 1) and (3 1 1) directions and displayed out-of-plane anisotropy, whereas the 50 nm thick CFO-Si film showed only an (1 1 1) orientation and an in-plane anisotropy. The 200 nm thick CFO film grown on an Al₂O₃ substrate was also found to show a complete (1 1 1) orientation and a strong in-plane anisotropy. These observations pointed to a definite relation between the crystalline orientation and the observed magnetic anisotropy in the CFO thin films.     

Effect of oxygen pressure on microstructure and magnetic properties of strontium hexaferrite (SrFe12O19) film prepared by pulsed laser deposition

The effects of oxygen pressure during deposition on microstructure and magnetic properties of strontium hexaferrite (SrFe₁₂O₁₉) films grown on Si (100) substrate with Pt (111) underlayer by pulsed laser deposition have been investigated. X-ray diffraction pattern confirms that the films have c-axis perpendicular orientation. The c-axis dispersion (Δθ₅₀) increases and c-axis lattice parameter decreases with increasing oxygen pressure. The films have hexagonal shape grains with diameter of 150-250 nm as determined by atomic force microscopy. The coercivities in perpendicular direction are higher than those in in-plane direction, which shows the films have perpendicular magnetic anisotropy. The saturation magnetization and anisotropy field for the film deposited in oxygen pressure of 0.13 mbar are comparable to those of the bulk strontium hexaferrite. Higher oxygen pressure leads to the films having higher coercivity and squareness. The coercivity in perpendicular and in-plane directions of the film deposited in oxygen pressure of 0.13 mbar are 2520 Oe and 870 Oe, respectively.     

Spin wave excitations in Fe films grown on GaAs(1 1 3)A substrates

The spin wave excitation and its size effect has been studied in Al-capped Fe films grown on low-symmetry GaAs(1 1 3)A substrates. The temperature dependence of saturation magnetization follows an effective Bloch's law as long as magnetization remains larger than about 70% of its saturation value. A significant increase of the spin wave parameter B is found in Al-capped ultrathin Fe films grown on GaAs(1 1 3)A compared to bulk Fe, Fe films on GaAs(0 0 1) and other systems. This is explained as a result of the reduction in uniaxial magnetic anisotropy observed in this orientation for the same thickness range. However, this observed uniaxial magnetic anisotropy is found to be a likely reason for stabilizing the ferromagnetism.     

Thickness dependence of microstructures in La0.9Sr0.1MnO3 thin films grown on exact-cut and miscut SrTiO3 substrates

The thickness dependence of microstructures of La_0.9Sr_0.1MnO₃ (LSMO) thin films grown on exact-cut and miscut SrTiO₃ (STO) substrates, respectively, was investigated by high-angle X-ray diffraction (HXRD), X-ray small-angle reflection (XSAR), X-ray reciprocal space mapping and atomic force microscopy (AFM). Results show that the LSMO films are in pseudocubic structure and are highly epitaxial [0 0 1]-oriented growth on the (0 0 1) STO substrates. The crystalline quality of the LSMO film is improved with thickness. The epitaxial relationship between the LSMO films and the STO substrates is [0 0 1]_LSMO[0 0 1]_EXACT-STO, and the LSMO films have a slight mosaic structure along the q_x direction for the samples grown on the exact-cut STO substrates. However, an oriented angle of about 0.24° exists between [0 0 1]_LSMO and [0 0 1]_MISCUT-STO, and the LSMO films have a mosaic structure along the q_z direction for that grown on the miscut STO substrates. The mosaic structure of both groups of the samples tends to reduce with thickness. The diffraction intensity of the (0 0 4) peaks increases with thickness of the LSMO film. The XSAR and AFM observations show that for both groups, the interface is sharp and the surface is rather smooth. The mechanism was discussed briefly.     

In situ magneto-optical Kerr effect study of uncovered Fe films on ZnSe(0 0 1)

The magnetic properties of uncovered Fe/ZnSe/GaAs(1 0 0) ultrathin films have been determined in situ by magneto-optical Kerr effect (MOKE). Fe films up to 10 monolayers (ML) thick were deposited on c(2×2) Zn-rich ZnSe/GaAs(0 0 1) surfaces at 180 °C. We have studied the thickness dependence of the in-plane lattice parameter of the Fe films and of the MOKE hysteresis loops in the longitudinal geometry, at 150 K, under magnetic fields up to 0.1 T applied along the [1 1 0] and [1-1 0] directions of the ZnSe(0 0 1). Reflection high energy electron diffraction show that in the low thickness regime the Fe films present an in-plane structural anisotropy characterized by an expansion along the [1 1 0] direction. Hysteretic loops were obtained only starting from ∼5 ML Fe. We found the onset of an uniaxial magnetic anisotropy with [1 1 0] magnetic easy axis at 7 ML Fe.     

A comparison of FePt thin films with HfO2 or MnO additive

The influence of oxide additives on the magnetic and structural properties of FePt L1₀ thin films has been studied. FePt films with HfO₂ additive grown on a 5 nm MgO buffer showed a primarily random texture for both as-deposited and annealed samples. The average grain size was limited to 10 nm and the perpendicular coercivity was 1.3 kOe for a 10 nm thick FePt +20% HfO₂ film annealed at 650°C for 10 min. In direct contrast, MnO additive neither limited grain size nor L1₀ ordering in annealed FePt films. A 10 nm thick FePt+20% MnO film grown on a 5 nm MgO buffer showed a unique discontinuous microstructure composed of clusters of (0 0 1) textured L1₀ grains after being annealed at 650°C for 10 min. The average size of the grains making up these clusters was 50 nm and the perpendicular coercivity of the film exceeded 7 kOe.