Metal adsorption on monolayer blue phosphorene: A first principles study

We investigated the electronic structure, adsorption energies, magnetic properties, dipole moment and work function of metal adatoms (Mg, Cr, Mo, Pd, Pt, and Au) adsorption on a blue phosphorene monolayer. For Mg, Pt and Au metals, the most stable state was found in hollow site while for Cr, Mo and Pd metals we found an adsorption in valley site. We suggest that the Pd and Pt atoms prefer 2D growth mode while the Mg, Cr, Mo and Au atoms prefer 3D island growth mode on monolayer phosphorene. The electronic band structures and magnetic properties were dependent on the doping site and dopant materials. For instance, the semiconducting features were preserved in Mg, Pd, Pt, and Au doped systems. However, the Cr and Mo doped systems displayed half-metallic band structures. The total magnetic moment of 4.05, 2.0 and $0.77{\text{μ}}_B/\text{impurity}$ atom were obtained in Cr, Mo and Au doped systems whereas the Mg, Pd and Pt doped systems remained nonmagnetic. We also investigated the magnetic interaction between two transition metal impurities. We observed ferromagnetic coupling between two transition metal impurities in Cr and Mo doped systems while the Au doped system displayed almost degenerated magnetic state. For Mg, Cr, and Mo adsorptions, we found relatively large values of dipole moments compared to those in the Pd, Pt and Au adsorptions. This resulted in a significant suppression of the work function in Mg, Cr and Mo adsorptions. Overall, adsorption can tune the physical and magnetic properties of phosphorene monolayer.     

Edge-functionalization of blue phosphorene nanoribbons: Studied from first-principle methods

Through density functional theory calculations, the impact of edge functionalization with O, OH, and alternate termination of them (OHO) on the structural stabilities, electronic and magnetic properties of blue phosphorene nanoribbons (BPNR) are mainly investigated. The formation energies demonstrate that the O-termination on the BPNRs is the most stable, and OHO-termination is more stable than OH-termination, besides the ab initio dynamic simulation show that they are all thermal dynamically stable at room temperature. Both the ground structures of O- and OH-BPNRs are spin-polarized semiconductors, while OH-functionalized BPNRs are nonmagnetic semiconductors. As the ribbon width increasing, the band gaps of O-aBPNRs tend to 1.04 eV, but that of OH-aBPNRs tend to 1.97 eV, comparable with the band gap of single-layer blue phosphorene, since it is dominated by pz electrons of the inner P atoms. In contrast, the influence of OHO-termination on GNRs, SiNRs, and black PNRs are also studied. Our results demonstrate that OHO-terminated GNRs and SiNRs are not a simple summation of O- and OH-terminated GNRs and SiNRs, and they are nonmagnetic stable both with zigzag and armchair edges, presenting metallic properties. While the OHO-terminated black PNRs present similar electronic and magnetic properties with OHO-terminated blue PNRs, and both the OHO-terminated zigzag and armchair edges are spin-polarized stable. These results provide potential help in the fields of band gap engineering and the designing of phosphorus-based spin devices with control over spin in spintronics.     

First-principles study on the electronic structure, magnetic properties and phase stability of alloyed cementite with Cr or Mn

Using the first-principles technique, the electronic structures, magnetic properties and phase stability of alloyed cementite with Cr or Mn were investigated. The calculations show that the chemical and mechanical stability of alloyed cementite can be strengthened by the use of Cr/Mn-doped method. The Magnetic Moments (Ms) of Mn₁Fe₂C, Mn₂Fe₁C, Cr₁Fe₂C and Cr₂Fe₁C are 5.274, 0.941, 1.864 and 0.736 μ_B/f.u, respectively. The Ms of Cr in Fe₂CrC (−1.374 μ_B) and Cr₂FeC (−0.032 μ_B) are different due to replacing different sites Fe atoms. The magnetic behaviors of Mn are different from Cr in alloyed cementite. The Ms of Mn in Fe₂MnC and Mn₂FeC are 2.300 μ_B and −0.147 μ_B, respectively.     

碱金属在磷烯表面吸附，迁移行为的第一性原理研究

利用基于密度泛函理论的平面波赝势方法研究了碱金属（Li、Na、K）−磷烯体系,分析了体系的吸附性质、电学性质和迁移行为. 结果表明：碱金属在磷烯表面的最稳定吸附位都是H位.吸附过程中电荷由碱金属原子转移到磷烯,碱金属−磷烯体系表现出一定的离子性. 碱金属−磷烯体系的吸附能从大到小为ΔELi−磷烯大于ΔEK−磷烯大于ΔENa−磷烯. Li→Na→K,随着原子序数的递增,体系的离子性逐渐增强;碱金属原子越来越容易在磷烯表面迁移.     

First-principles study on electronic,magnetic properties and optical absorption of vanadium doped rutile TiO2

The electronic, magnetic properties and optical absorption of vanadium (V) doped rutile TiO₂ have been studied by the generalized gradient approximation GGA and GGA+U (Hubbard coefficient) approach respectively. On the one hand, we consider the influence of vanadium with different doping concentration on the electronic structure. On the other hand, we study double V atoms doped TiO₂, mainly study four V-doped TiO₂ configurations, and find the magnetic ground states are ferromagnetic state. For the TiO₂@V-V1, TiO₂@V-V3 and TiO₂@V-V4 configurations without O ion as bridge between V-V atoms, there will have a metastable state of antiferromagnetic configurations, while, for the TiO₂@V-V2 configurations with an O ion as bridge between V-V atoms, due to the existence of superexchange between V-O-V, there will only exist the ground state of ferromagnetic state and there are no other metastable configurations. Furthermore, the optical properties of V-doped TiO₂ are calculated. The results show that the V-doped TiO₂ has strong infrared light absorption and visible light absorption.     

碳、氧、硫掺杂二维黑磷的第一性原理计算

基于密度泛函理论的第一性原理平面波赝势方法,研究了二维黑磷中的碳原子(C P)、氧原子(C P)、硫原子(S P)掺杂的几何结构、磁学性质和电子结构.发现掺杂体系结构稳定,C P和O P体系形变较大,而S P体系形变较小;二维黑磷本身无磁矩,掺杂后都具有1μB的总磁矩.由于掺杂体系具有稳定的铁磁性,使其在自旋电子器件方面可发挥重要的作用.     

First-principles study of electronic structure and ferromagnetism in Ti-doped ZnO

We perform first-principles spin polarized calculations of the electronic structure of Ti-doped in ZnO. Ferromagnetism in Ti-doped ZnO is identified, which is in agreement with recent experimental and calculated results. A net magnetic moment of 0.715μ_B is found per Ti. At a Ti concentration of 12.5%, total energy calculations show that the ferromagnetic state is 68 meV lower than the antiferromagnetic state. The electronic states near Fermi energy are dominated by strong hybridization between O 2p and Ti 3d, which is just the origin of impurity band in Ti-doped ZnO and also implies that the Ti-O bond is quite covalent instead of purely ionic. Since there is no magnetic element in this compound, Ti-doped ZnO appears to be an unambiguous dilute magnetic semiconductor.     

Dangling bond modulating the electronic and magnetic properties of zigzag SiGe nanoribbon

First-principles nonmagnetic calculations reveal a metallic character in zigzag SiGe nanoribbons (ZSiGeNRs) regardless of their width. The partial DOS projected onto the Si and Ge atoms of ZSiGeNR shows that a sharp peak at the Fermi level is derived from the edge Si and Ge atoms. The charge density contours show the Si–Ge bond is covalent bond, while for the Si–H bond and Ge–H bond, the valence charges are strongly accumulated around H atoms due to their stronger 1 s potential and the higher electronegativity of 2.20 than that of 1.90 for Si atom and 2.01 for Ge atom, so that a significant charge transformation from Si or Ge atoms to H atoms and thus an ionic binding feature. Spin–polarization calculations show that the band structures of ZSiGeNR are modified by the dangling bonds. Compared with perfect ZSiGeNR which is a ferrimagnetic semiconductor, the bands of the ZSiGeNRs with bare Si edge, bare Ge edge, and bare Si and Ge edges shift up and nearly flat extra bands appear at the Fermi level. The ZSiGeNR with bare Si edge or bare Ge edge is a ferrimagnetic metal, while ZSiGeNR with bare Si and Ge edges is a nonmagnetic metal.     

First-principles study on the structural and electronic properties of ultrathin ZnO nanofilms

Using first-principles density-functional calculations, we have studied the structural and electronic properties of ultrathin ZnO {0001} nanofilms. The structural parameters, the charge densities, band structures and density of states have been investigated. The results show that there are remarkable charge transfers from Zn to O atoms in the ZnO nanofilms. All the ZnO nanofilms exhibit direct wide band gaps compared with bulk counterpart, and the gap decreases with increased thickness of the nanofilms. The decreased band gap is associated with the weaker ionic bonding within layers and the less localization of electrons in thicker films. A staircase-like density of states occurs at the bottom of conduction band, indicating the two-dimensional quantum effects in ZnO nanofilms.     

非对称结构对黑磷烯器件电子输运的影响

利用不同宽度的锯齿型黑磷烯纳米带构建了非对称结构的纳米器件.第一性原理计算结果表明,非对称结构器件I-V曲线展现表现出整流效应,最大整流比达到1.01×10~6.器件的不同非对称结构导致了不同整流行为.我们通过传输谱和透射本征态讨论得到,器件中心区域和电极的耦合变化导致了本征态的变化,从而产生不同的电子输运性质.结果为基于黑磷烯二维材料异质结整流器件的设计提供了一种可行性方案.     

多壳层铜纳米线结构和电子特性的第一性原理研究

基于密度泛函理论框架下的第一性原理计算,系统地研究了多壳层Cu纳米线的稳定结构和电子特性.得到不同线径多壳层Cu纳米线的平衡态晶格常数相差不大,都表现出金属特性,且其单原子平均结合能和量子电导随着纳米线直径的增加而增加.纳米线中内壳层Cu原子表现出体相结构Cu原子相似的电子特性,而表面壳层由于配位数的减少,其3d态能量范围变窄且整体向费米能级发生移动.电荷密度分析表明,相对于体相Cu晶体中原子间的相互作用,纳米线表面壳层Cu原子与其最近邻原子间的相互作用明显增强.     

First-principle study of the structural, electronic, and magnetic properties of amorphous Fe-B alloys

The structural, electronic, and magnetic properties of amorphous Fe_100−xB_x alloys (x=9, 17, 25, 27.3, 33.3, 36.3) are investigated using first-principles calculations. In these amorphous alloys, the short-range order is manifested as a series of Fe- or B-centered polyhedra such as tricapped trigonal prism, icosahedron, and bcc-like structural unit. The electron densities of states of the amorphous alloys resemble those of crystalline Fe borides, which further confirm the similarity of the local order in the amorphous and crystalline phases. All B atoms carry small negative moments of about −0.1μ_B, while small negative moments are also found on very few Fe sites for the Fe-rich compositions (x=9, 17). The average magnetic moment per Fe atom decreases nonlinearly with increasing B composition, which can be associated with the nonlinear relationship between mass density and composition.     

Nd、N掺杂ZnO的电子结构和光学性质的第一性原理研究

基于密度泛函理论的第一性原理,使用GGA+U方法计算出N、Nd分别单掺ZnO及N、Nd共掺ZnO晶体的形成能,能带结构,态密度及光学性质.经过对比发现:N、Nd各掺杂ZnO中,共掺体系比单掺体系更容易形成,其中低浓度掺杂难度更低;共掺体系随着掺杂浓度的升高,其畸变的强度就越强,禁带宽度变窄,电子跃迁到导带上所需的能量更小,光吸收系数较大,并且都产生了红移,光谱响应范围扩展到了整个可见光区域;共掺体系在低能区域的介电谱峰值较高,说明其极化能力较强,光生电场强度较大,会使光激发载流子在晶体内的迁移变快,对电荷的束缚能力增强.因此N、Nd共掺可以有效提升ZnO的光催化性和极化能力.     

Ba0.5Ca0.5ZrO3电子结构和光学性质的第一性原理研究

从第一性原理出发,利用密度泛函理论体系下的广义梯度近似,研究了Ba0.5Ca0.5ZrO3的电子结构和光学性质.计算得到该晶体的晶格常数为4.1823 A,且此材料是一种间隙的半导体材料,价带和导带都来源于Ba原子、Ca原子、Zr原子的d态和O原子的p态电子间的杂化.吸收系数为105 cm-1量级,且吸收主要集中在低能区.静态折射率为1.79,能量损失峰出现在10.8 eV处.该研究结果为Ba0.5Ca0.5ZrO3光电材料的设计和应用提供了理论依据.     

高压下BaHfO3电子结构与光学性质的第一性原理研究

从第一性原理出发,在局域密度近似下,采用基于密度泛函理论的平面波超软赝势计算方法系统地研究了高压对BaHfO3电子结构与光学性质的影响．能带结构分析表明：无压强和施加正压强作用时,BaHfO3为直接带隙绝缘体,而施加负压强时,BaHfO3则转变为间接带隙半导体;BaHfO3的带隙随压强增加而减小,且具有明显的非线性关系．对光学性质的分析发现：施加正压强后,光学吸收带边产生蓝移;负压强作用时介电函数虚部尖峰减少,光学吸收带边产生红移;施加压强后BaHfO3的静态介电常数和静态折射率均增大．上述研究表明施加高压有效调制了BaHfO3的电子结构和光学性质,计算结果为BaHfO3光电材料的设计与应用提供了理论依据．     

高压下BaHfO3电子结构与光学性质的第一性原理研究

从第一性原理出发,在局域密度近似下,采用基于密度泛函理论的平面波超软赝势计算方法系统地研究了高压对BaHfO₃电子结构与光学性质的影响.能带结构分析表明;无压强和施加正压强作用时,BaHfO₃为直接带隙绝缘体,而施加负压强时,BaHfO₃则转变为间接带隙半导体;BaHfO₃的带隙随压强增加而减小,且具有明显的非线性关系.对光学性质的分析发现:施加正压强后,光学吸收带边产生蓝移;负压强作用时介电函数虚部尖峰减少,光学吸收带边产生红移;施加压强后BaHfO₃的静态介电常数和静态折射率均增大.上述研究表明施加高压有效调制了BaHfO₃的电子结构和光学性质,计算结果为BaHfO₃光电材料的设计与应用提供了理论依据.     

高压下LiNbO3晶体电子结构与光学性质的第一性原理研究

利用基于密度泛函理论的第一性原理超软赝势平面方法研究了外界压强对LiNbO3晶体波态密度,能带结构,电荷密度以及光学性质的影响.能带结构计算表明,价带顶主要由O-2p和Nb-4d态电子贡献,导带底主要由Nb-4d态电子贡献,且带隙随着压强的增加而线性增大.利用复介电函数计算了LiNbO3晶体在不同压强下光学性质的折射率、反射率、吸收系数,能量损失函数以及光电导率. 研究发现：外界压强大于10Gpa时,静态折射率保持不变,随外界压强的增加,反射率、吸收函数以及光电导率区间有一定程度的拓宽,损失函数峰发生“蓝移”.研究表明,高压可以有效调控LiNbO3晶体的电子结构和光学性质,为LiNbO3晶体的高压应用提供了有益的理论依据.     

高压下LiNbO_3晶体电子结构与光学性质的第一性原理研究

利用基于密度泛函理论的第一性原理超软赝势平面方法研究了外界压强对LiNbO_3晶体态密度,能带结构,电荷密度以及光学性质的影响.能带结构计算表明,价带顶主要由O-2p和Nb-4d态电子贡献,导带底主要由Nb-4d态电子贡献,且带隙随着压强的增加而线性增大.利用复介电函数计算了LiNbO_3晶体在不同压强下光学性质的折射率、反射率、吸收函数,能量损失函数以及光电导率.研究发现:外界压强大于10GPa时,静态折射率保持不变,随外界压强的增加,反射率、吸收函数以及光电导率区间有一定程度的拓宽,损失函数峰发生"蓝移".研究表明,外界高压可以有效调控LiNbO_3晶体的电子结构和光学性质,为LiNbO_3晶体的高压应用提供了有益的理论依据.     

First-principles investigation of structural,elastic, electronic and magnetic properties of Be0.75Co0.25Y (YS,Se and Te) compounds

We have theoretically investigated the structural, elastic, electronic and magnetic properties of Be_0.75Co_0.25Y (YS, Se and Te) alloys, in their zinc-blend phase. This study is carried out by using the full-potential augmented plane wave plus local orbitals method within the density functional theory. Foe computing the exchange-correlation potential, the Wu and Cohen generalized gradient approximation is employed to calculate structural and elastic properties whereas the modified Becke and Johnson potential local density approximation is utilized to examine electronic and magnetic properties. By minimizing the total energy in paramagnetic (PM) and ferromagnetic (FM) phases, it is found the studied compounds are stable in FM structure. The mechanical behavior of the studied compounds is reported with the calculation of shear modulus, Young's modulus, and Poisson's ratio provides. Such mechanical aspects might be useful for the experimentalists to study the mechanical properties upon alloying BeY compounds with Co. We also compute electronic structures, density of states (total and partial), pd-exchange splitting and magnetic moments. Moreover, bond nature is studied by estimating the spin polarized charge densities of Be_0.75Co_0.25Y (YS, Se and Te).