A non-precious metal catalyst for oxygen reduction prepared by heat-treating a mechanical mixture of carbon black,melamine and cobalt chloride

A non-precious metal catalyst CoMe]C for the oxygen reduction reaction is prepared by heat-treating a mechanical mixture of carbon black, melamine and cobalt chloride at 600 under nitrogen atmosphere for 2 h. The catalytic activity of CoMe/C is characterized by the electrochemical linear sweep voltammetry technique. The onset reduction potential of the catalyst is 0.55 V （vs. SCE） at a scanning rate of 5 mV/s in 0.5 mol/L H2SO4 solution. The formation of the ORR activity sites of CoMe/C is facilitated by metallic β- cobalt.     

Ordered mesoporous metal oxides: synthesis and applications

Great progress has been made in the preparation and application of ordered mesoporous metal oxides during the past decade. However, the applications of these novel and interesting materials have not been reviewed comprehensively in the literature. In the current review we first describe different methods for the preparation of ordered mesoporous metal oxides; we then review their applications in energy conversion and storage, catalysis, sensing, adsorption and separation. The correlations between the textural properties of ordered mesoporous metal oxides and their specific performance are highlighted in different examples, including the rate of Li intercalation, sensing, and the magnetic properties. These results demonstrate that the mesoporosity has a direct impact on the properties and potential applications of such materials. Although the scope of the current review is limited to ordered mesoporous metal oxides, we believe that the information may be useful for those working in a number of fields.     

Electrocatalytic activity of non-precious metal catalyst Co-N/C toward oxygen reduction reaction

<正>Metallic cobalt was deposited on acetylene black to synthesize a composite Co/C by chemical reduction method.A platinumfree electrocatalyst Co-N/C(800) for oxygen reduction reaction(ORR) was synthesized by mixing the composite Co/C with urea and heat-treating at 800℃.The results from linear sweep voltammograms indicated that the Co-N/C(800) is active to ORR.Theβ-Co and cobalt oxides are not the active site of the catalyst Co-N/C.However,the existence of cobalt facilitated the modification of nitrogen to carbon black and led to the formation of active site of catalyst Co-N/C(800).     

Shape- and size-controlled synthesis in hard templates: sophisticated chemical reduction for mesoporous monocrystalline platinum nanoparticles

Here we report a novel hard-templating strategy for the synthesis of mesoporous monocrystalline Pt nanoparticles (NPs) with uniform shapes and sizes. Mesoporous Pt NPs were successfully prepared through controlled chemical reduction using ascorbic acid by employing 3D bicontinuous mesoporous silica (KIT-6) and 2D mesoporous silica (SBA-15) as a hard template. The particle size could be controlled by changing the reduction time. Interestingly, the Pt replicas prepared from KIT-6 showed polyhedral morphology. The single crystallinity of the Pt fcc structure coherently extended over the whole particle.     

A catalytic chemical vapor deposition synthesis of double-walled carbon nanotubes over metal catalysts supported on a mesoporous material

Double-walled carbon nanotubes (DWNTs) have been synthesized by catalytic chemical vapor deposition (CCVD) over supported metal catalysts decomposed from Fe(CH₃COO)₂ and Co(CH₃COO)₂ on mesoporous silica. Bundles of tubes with relatively high percentage of DWNTs, in areas where tubular layered structures could be clearly resolved, have been observed by transmission electron microscopy (TEM). In other areas, crystal-like alignment of very uniform DWNTs was observed for the first time, suggesting that mesoporous silica might play a templating role in guiding the initial nanotube growth. In addition, compatible with nano-electronics research, bridging of catalytic islands by DWNTs has also been demonstrated.     

Synthesis of dual-doped non-precious metal electrocatalysts and their electrocatalytic activity for oxygen reduction reaction

The pyrolyzed carbon supported ferrum polypyrrole(Fe-N/C) catalysts are synthesized with or without selected dopants, p-toluenesulfonic acid(TsOH), by a facile thermal annealing approach at desired temperature for optimizing their activity for the oxygen reduction reaction(ORR) in O2-saturated 0.1 mol/L KOH solution. The electrochemical techniques such as cyclic voltammetry(CV) and rotating disk electrode(RDE) are employed with the Koutecky-Levich theory to quantitatively obtain the ORR kinetic constants and the reaction mechanisms. It is found that catalysts doped with TsOH show significantly improved ORR activity relative to the TsOH-free one. The average electron transfer numbers for the catalyzed ORR are determined to be 3.899 and 3.098, respectively, for the catalysts with and without TsOH-doping. The heat-treatment is found to be a necessary step for catalyst activity improvement, and the catalyst pyrolyzed at 600℃ gives the best ORR activity. An onset potential and the potential at the current density of-1.5 mA/cm2 for TsOH-doped catalyst after pyrolysis are 30 mV and 170 mV, which are more positive than those without pyrolized. Furthermore, the catalyst doped with TsOH shows higher tolerance to methanol compared with commercial Pt/C catalyst in 0.1 mol/L KOH. To understand this TsOH doping and pyrolyzed effect, X-ray diffraction(XRD), scanning electron microscope(SEM) and X-ray photoelectron spectroscopy(XPS) are used to characterize these catalysts in terms of their structure and composition. XPS results indicate that the pyrrolic-N groups are the most active sites, a finding that is supported by the correspondence between changes in pyridinic-N content and ORR activity that occur with changing temperature. Sulfur species are also structurally bound to carbon in the forms of C–Sn–C, an additional beneficial factor for the ORR.     

Synthesis of dual-doped non-precious metal electrocatalysts and their electrocatalytic activity for oxygen reduction reaction

The pyrolyzed carbon supported ferrum polypyrrole(Fe-N/C) catalysts are synthesized with or without selected dopants, p-toluenesulfonic acid(TsOH), by a facile thermal annealing approach at desired temperature for optimizing their activity for the oxygen reduction reaction(ORR) in O2-saturated 0.1 mol/L KOH solution. The electrochemical techniques such as cyclic voltammetry(CV) and rotating disk electrode(RDE) are employed with the Koutecky-Levich theory to quantitatively obtain the ORR kinetic constants and the reaction mechanisms. It is found that catalysts doped with TsOH show significantly improved ORR activity relative to the TsOH-free one. The average electron transfer numbers for the catalyzed ORR are determined to be 3.899 and 3.098, respectively, for the catalysts with and without TsOH-doping. The heat-treatment is found to be a necessary step for catalyst activity improvement, and the catalyst pyrolyzed at 600℃ gives the best ORR activity. An onset potential and the potential at the current density of-1.5 mA/cm2 for TsOH-doped catalyst after pyrolysis are 30 mV and 170 mV, which are more positive than those without pyrolized. Furthermore, the catalyst doped with TsOH shows higher tolerance to methanol compared with commercial Pt/C catalyst in 0.1 mol/L KOH. To understand this TsOH doping and pyrolyzed effect, X-ray diffraction(XRD), scanning electron microscope(SEM) and X-ray photoelectron spectroscopy(XPS) are used to characterize these catalysts in terms of their structure and composition. XPS results indicate that the pyrrolic-N groups are the most active sites, a finding that is supported by the correspondence between changes in pyridinic-N content and ORR activity that occur with changing temperature. Sulfur species are also structurally bound to carbon in the forms of C–Sn–C, an additional beneficial factor for the ORR.     

One-dimensional polymers containing strictly collinear metal ions: synthesis and XRPD characterization of homoleptic binary metal pyrazolates

The synthesis of a number of 3d transition metal binary pyrazolates in microcrystalline form, thus suitable for a full XRPD characterization, has been pursued. The crystal and molecular structures of the Fe(pz)3, Co(pz)2, Co(pz)3, and Ni(pz)2 polymers, together with the few congeners reported in the recent literature, show that these species tend to afford highly crystalline materials where strictly collinear chains of metal atoms are present. Depending on the synthetic strategy used, Ni(pz)2 has been found to crystallize as two different alpha (orthorhombic) and beta (monoclinic) phases, possessing nearly identical intramolecular features. Data for each compound follow. Fe(pz)3: C9H9FeN6, hexagonal, P63/m, a = 9.1745(3) A, c = 7.2191(4) A, Z = 2. Co(pz)2: C6H6CoN4, orthorhombic, Ibam, a = 7.5239(5) A, b = 14.3461(9) A, c = 7.4331(5) A, Z = 4. Co(pz)3: C9H9CoN6, hexagonal, P63/m, a = 9.1966(3) A, c = 7.1051(3) A, Z = 2. Alpha-Ni(pz)2: C6H6N4Ni, orthorhombic, Cmcm, a = 16.6758(11) A, b = 6.4872(4) A, c = 6.9423(6) A, Z = 4. Beta-Ni(pz)2: C6H6N4Ni, monoclinic, P21/m, a = 9.967(2) A, b = 6.975(1) A, c = 6.016(1), A, beta = 98.50(1)degrees, Z = 2. The thermal stability and the detailed structural properties of these model compounds have been evaluated, in the light of the technologically relevant crystal phases (the well-known metal-diazolates showing reversible spin-crossover or spin-transition behavior) obtainable upon doping, magnetic dilution, and ring substitution (in the 4-position).     

Microwave-assisted synthesis of 4-quinolylhydrazines followed by nickel boride reduction: a convenient approach to 4-aminoquinolines and derivatives

Nickel(II) chloride/sodium borohydride combination was employed for the reduction of 4-hydrazinoquinoline derivatives to the corresponding anilines. This reductive protocol was efficiently applied for the reductive cleavage of monosubstituted hydrazines. We described herein the microwave-assisted synthesis of 4-hydrazinoquinolines, which furnished a high yielding and rapid two-step procedure for the synthesis, under mild conditions, of 4-aminoquinolines as antimalarial precursors.     

Container effect in nanocasting synthesis of mesoporous metal oxides

We report a general reaction container effect in the nanocasting synthesis of mesoporous metal oxides. The size and shape of the container body in conjunction with simply modifying the container opening accessibility can be used to control the escape rate of water and other gas-phase byproducts in the calcination process, and subsequently affect the nanocrystal growth of the materials inside the mesopore space of the template. In this way, the particle size, mesostructure ordering, and crystallinity of the final product can be systemically controlled. The container effect also explain some of the problems with reproducibility in previously reported results.     

Asymmetric synthesis by chiral cobalt catalysts: Homogeneous reduction of ketones to optically active alcohols

The hydrogenation of ketones with Co₂(CO)₆(PR₃)₂ (PR₃ = PPh₂-neomenthyl, PPh₂ -6-deoxo-1,2:3,4-diisopropylidene d-galactose and PMe₂ -menthyl) as catalysts gives optically active alcohols in optical yields of 1.6 to 5%.     

Photo-promoted carbonylation of chloroalkanes with carbon monoxide by non-precious metal catalysts

The photo-promoted carbonylation of chloroalkanes with carbon monoxide was carried out under ambient conditions with copper and cadmium salts catalysts. The results indicated that the corresponding esters were produced with three salt catalysts, i.e. CuBr2, CuCl2 and CdI2. Among these catalysts, CdI2 was the most efficient in terms of ester yield and selectivity, particularly, 60% yield and 75% selectivity in the carbonylation of chlorocyclohexane were achieved. Furthermore, the yield and selectivity of the ester can be improved greatly by adding tri-n-butylamine in the CuBr2 and CuCl2 catalyst systems. On the other hand, the carbonylation did not proceed with single CdCl2, however, the catalytic activity of CdCl2 was increased greatly with NaIá2H2O as additive. As a result, we suggest that iodide ion plays an important role in the catalyst system of the cadmium salts.     

A glucose-responsive controlled release system using glucose oxidase-gated mesoporous silica nanocontainers

A glucose-responsive controlled-release system based on the competitive combination between glucose oxidase, glucosamine and glucose has been described, which exhibits perfect controlled release properties and high selectivity for glucose over other monosaccharides. This paved the way for a new generation of stimuli-responsive delivery systems.     

General synthesis of mesoporous spheres of metal oxides and phosphates

Monodisperse and high-surface-area mesoporous inorganic spheres of various compositions including metal oxides, mixed oxides, and metal phosphates are prepared by templating mesoporous carbon spheres which are replicated from spherical mesoporous silica. Due to the rigid and thermally stable framework of carbon template, the crystalline phases of the obtained metal oxide spheres can be readily tailored by controlling crystalline temperatures. Moreover, the sphere morphologies can be changed from solid structure to hollow structure in some cases by changing the polarity of the precursor, due to the hydrophobic nature of carbon template.     

Double-pillared cobalt Pacman complexes: synthesis, structures and oxygen reduction catalysis

The syntheses and structures of binuclear cobalt complexes of a double-pillared cofacial Schiff-base pyrrole macrocycle (L) were determined and their activity as catalysts for the oxygen reduction reaction evaluated. The new binuclear cobalt complex, [Co(2)(L)], 1 was formed in good yield using a salt-elimination method and was characterised as adopting a cofacial structure in solution by NMR spectroscopy and as its THF and pyridine solvates in the solid state by X-ray crystallography. Using a variety of spectroscopic techniques, this complex was found to react reversibly with dioxygen to form a new paramagnetic complex. Furthermore, the new aqua-hydroxy double salt [Co(2)(μ-H(3)O(2))(py)(2)(L)][BF(4)] 2 was characterised by X-ray crystallography. In acidified benzonitrile solution, 1 behaves as a catalyst for the selective four-electron reduction of dioxygen to water and showed a large improvement in efficacy compared to its o-phenylene Schiff-base analogues.     

Chemical vapor deposition of metal borides: 6. The formation of neodymium boride thin film materials from polyhedral boron clusters and metal halides by chemical vapor deposition

The chemical vapor deposition (CVD) of crystalline thin films of neodymium hexaboride (NdB₆) was achieved using either nido ‐pentaborane(9) or nido ‐decaborane(14) with neodymium(III) chloride on different substrates. The highly crystalline NdB₆ films were formed at relatively moderate temperatures (835 °C, ca. 1 µm/h) and were characterized by scanning electron microscopy, X‐ray emission spectroscopy, X‐ray diffraction and glow discharge mass spectrometry. The NdB₆ polycrystalline films were found to be pure and uniform in composition in the bulk material. Depositions using CoCl₂, NdCl₃ and B₅H₉ as the CVD precursors resulted in the formation of a mixture of NdB₆ and CoB phases, rather than the ternary phase. Copyright © 2008 John Wiley & Sons, Ltd.     

Silver metal nanoparticles: Facile dendrimer‐assisted size‐controlled synthesis and selective catalytic reduction of chloronitrobenzenes

A simple and versatile synthetic methodology to silver metal nanoparticles that utilizes 3,5‐dihydroxybenzyl alcohol‐based dendrimers as templates and does not necessitate the addition of any external reducing agent is reported. An evaluation of the role of addition rate of the silver acetate solution, and the dendrimer to silver acetate molar ratio, as well as the dendritic effect on nanoparticle growth, suggests that the size of these metal nanoparticles can be controlled by simple variations of these parameters. A probe of the mechanism of the nanoparticle formation and growth indicates that the terminal hydroxyl groups of the dendrimers play a major role in metal ion isolation and reduction, in addition to providing stabilization to the growing metal particles. These silver metal nanoparticles are highly active catalysts for the selective reduction of chloronitrobenzenes to chloroanilines. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4482–4493, 2009     

Extending the pore size of crystalline metal phosphonates toward the mesoporous regime by isoreticular synthesis

Crystalline microporous cobalt and nickel bisphosphonates with a hexagonal array of one-dimensional channels 1.8 nm in diameter have been prepared hydrothermally and provide the first example of the use of isoreticular chemistry in the synthesis of phosphonate metal-organic frameworks. The materials contain both physisorbed and coordinating water molecules in the as-prepared form, but these can be removed to give permanent extra-large microporosity, with pore volumes of up to 0.68 cm(3) g(-1), and coordinatively unsaturated sites, with concentrations up to 4.25 mmol g(-1).     

A novel pH-responsive controlled release system based on mesoporous silica coated with hydroxyapatite

With well bioactive and nontoxic, hydroxyapatite (HAp) was employed to seal the nanopores of mesoporous silica (MCM-41) to realize the pH-responsive controlled release. First, MCM-41 was modified with cationic polymer, poly-(diallyldimethylammoniumchloride) (PA). And after the addition of Ca²⁺/PO₄ ^3?, HAp precipitation can take place based on the cationic sites derived from PA. It is a simple and effective way to obtain HAp coating MCM-41 system (MHAs). The structure of the system was characterized by X-ray diffraction, scanning electron microscope, transmission electron microscope, N₂ adsorption–desorption and so on. Metformin hydrochloride was used as the model drug, and the drug release performance and the release kinetics of the system were investigated in detail. Because of the degradation of HAp under acid condition, the drug loading MHAs showed a well pH-sensitive controlled release behavior. From above investigation, MHAs is a promising platform to construct a pH-responsive controlled drug delivery system, especially for some low pH tissues, such as inflammatory and tumor.