Adsorption behavior of hexadecyltrimethylammonium bromide (CTAB) to mica substrates as observed by atomic force microscopy

The study of the adsorption behavior of surfac-which makes people further study the adsorptiontants to interfaces is very important in colloid and in-mechanism at the molecular level.terface science[1]owing to the important applications In situ AFM measur…     

Truly nonionic polymer shells for the encapsulation of living cells

Engineering surfaces of living cells with natural or synthetic compounds can mediate intercellular communication and provide a protective barrier from hostile agents. We report on truly nonionic hydrogen-bonded LbL coatings for cell surface engineering. These ultrathin, highly permeable polymer membranes are constructed on living cells without the cationic component typically employed to increase the stability of LbL coatings. Without the cytotoxic cationic PEI pre-layer, the viability of encapsulated cells drastically increases to 94%, in contrast to 20% viability in electrostatically-bonded LbL shells. Moreover, the long-term growth of encapsulated cells is not affected, thus facilitating efficient function of protected cells in hostile environment.     

Fibrinogen Adsorption on Biomaterials – A Numerical Study

A model for the adsorption of fibrinogen or, in general, non‐globular shaped proteins on solid surfaces are presented. Two‐dimensional cellular automata simulations of the adsorption of fibrinogen on two different surfaces were performed. The model includes mass transfer toward the surface, adsorption of fibrinogen molecules, and surface diffusion mechanisms for both fibrinogen molecules and clusters. We show that the major physical processes are represented in the recent model. Particularly, the influence of the surface hydrophobicity on the behavior of fibrinogen. Atomic force microscopy images of fibrinogen adsorption on Si model surfaces with different hydrophobicity are compared to the results.

     

Atomic force microscopy observations of the structural development during the uniaxial stretching of crosslinked low-density polyethylene in partial and fully molten states

The effect of uniaxial deformation in partially and fully molten states on the morphology of crosslinked low-density polyethylene has been investigated. At low temperatures, the morphology is predominantly fibrillar, with little kebabs appearing on the fibril surfaces. As the deformation temperature is increased into the melting range, the shish density decreases, and overgrowths of kebabs on the fibrils concurrently increase in length. This gives rise to added twisting of the kebabs reflected in the orientation factor analysis. This shish/twisted lamellar kebab texture is observed only in a partially molten state. Studies in a substantially molten state indicate the absence of shish, althugh short lamellae are observed that are oriented in the transverse direction. This morphology indicates a high chain orientation factor as a result of short lamellae that exhibit small twisting similar to Matsumura's rod model. The absence of shishes in the final films stretched isothermally in a substantially molten stage agrees with Schultz's model, in which imperfectly formed shishes dissolve if they are not stabilized by rapid cooling, as is the case in these studies. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 2228–2237, 2004     

Layer‐by‐layer assembly of weak‐strong copolymer polyelectrolytes: A route to morphological control of thin films

Multilayer films were assembled from a strong polyelectrolyte (poly(diallyldimethylammonium chloride), PDADMAC) and a copolymer containing both strongly charged styrene sulfonate moieties and weakly charged maleic acid moieties (poly(4‐styrenesulfonic acid‐co‐maleic acid), PSSMA). Growth of PSSMA/PDADMAC multilayers was linear, as characterized by UV‐vis spectroscopy and quartz crystal microgravimetry. The influence of both the pH of the PSSMA adsorption solutions and the ratio of SS:MA in the PSSMA on multilayer properties was investigated. Fourier transform infrared spectroscopy results showed that the ionization of carboxylic acid groups in PSSMA/PDADMAC multilayers did not vary significantly with changes in the PSSMA assembly pH. However, the multilayers showed different thicknesses, surface morphologies, and stability to post‐assembly pH treatment. We also demonstrate that PSSMA/PDADMAC multilayers are significantly more stable than PSSMA/PAH multilayers after post‐assembly pH treatment (i.e. the films remain intact when exposed to pH extremes). In addition, the surface morphology of two films (PSSMA 1:1 assembled at pH 5.8, post‐treated at pH 2 and PSSMA 3:1 assembled at pH 5.8, post‐treated at pH 11) changed significantly when the films were exposed to solutions of different pH and, in the former case, this change in film morphology was reversible. The porous morphology after treatment at pH 2 could be reversed to give a significantly smoother film after subsequent exposure to water for 24 h. Our results demonstrate that by the rational choice of the assembly pH of PSSMA, stable and pH‐responsive films can be obtained via the sequential assembly of PSSMA and PDADMAC. These films have potential in controlled release applications where film stability and pH‐responsive behavior are essential. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4341‐4351, 2007     

Synthesis and optoelectronic properties of novel benzodifuran semiconducting polymers

Two new semiconducting polymers poly{4,8‐bis(4‐decylphenylethynyl)benzo[1,2‐b:4,5‐b′]difuran} ( P1 ) and poly {4,8‐bis(4‐decylphenylethynyl)benzo[1,2‐b:4,5‐b′]difuran‐alt‐4,8‐bis(4‐decylphenylethynyl)benzo[1,2‐b:4,5‐b′]dithiophene} ( P2 ) have been synthesized. These polymers were tested in bulk heterojunction solar cells yielding power conversion efficiencies of 1.19% for P1 and 0.79% for P2 . The surface morphology of the solar cell devices indicated that both the polymers display a granular morphology with smoother films displaying higher power conversion efficiencies. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Stretched polymer surfaces: Atomic force microscopy measurement of the surface deformation and surface elastic properties of stretched polyethylene

The surface structure and surface mechanical properties of low‐ and high‐density polyethylene were characterized by atomic force microscopy (AFM) as the polymers were stretched. The surfaces of both materials roughened as they were stretched. The roughening effect is attributed to deformation of nodular structures, related to bulk spherulites, at the surface. The surface‐roughening effect is completely reversible at tensile strains in the elastic regime and partially reversible at tensile strains in the plastic regime until the polymers are irreversibly drawn into fibers. AFM force versus distance interaction curves, used to measure changes in the stiffness of the surface and the surface elastic modulus as a function of elongation, show that the surfaces become softer as the polymers are drawn into fibers at high strains. At low elastic strains, however, the surface elastic modulus of HDPE increases—attributed to elastic energy stored by the amorphous regions. © 2001 John Wiley & Sons, Inc. J Polym Sci Part B: Polym Phys 39: 2263–2274, 2001     

AFM Study of the Self‐Assembly Behavior of Hexa‐Armed Star Polymers with a Discotic Triphenylene Core

The six‐armed polystyrenes and poly(methyl methacrylate)s with a triphenylene core showed different self‐assembling patterns, isolated cylinders for polySt on mica and highly ordered cylindrical pores for polyMMA on a silicon wafer. With a decrease of polymer concentration in tetrahydrofuran (THF), the size and height of cylinders decreased for polySt, but for polyMMA, the size and depth of the cylindrical pores increased. Slow evaporation of the solvent and a low molecular weight favored the formation of regular patterns.

AFM images of self‐assembling patterns of polySt 1a on mica (A) and of polyMMA 2a on silicon wafer (B).     

Influence of the Nanoscale Morphology on the Photovoltaic Properties of Fullerene/MEH-PPV Composites

The relation between morphology and photoelectric properties of PPV derivatives/fullerene composites forming bulk heterojunction solar cells has been investigated. The solvent used to spin cast the photoactive layers has a main influence on the quenching of the MEH-PPV fluorescence, which could be attributed to different dispersion abilities of C₆₀ in the polymer layer shown by AFM microscopy. Formation of large fullerene aggregates is observed at fullerene concentrations of the order of 10% leading to phase separation for composite layers processed in THF, whereas more dispersed distributions of fullerenes are observed in an aromatic solvent like ODCB which accounts for a more efficient luminescence quenching with increasing filler concentrations. However the improvement of the dissociation of photogenerated charge pairs is counterbalanced by a less efficient charge transport in the composite shown by lower short circuit currents probably due to unfavorable polymer chain arrangement in ODCB. Thin film processing conditions have been modified by the preparation of blends of solutions of the polymer in THF and fullerene in ODCB. The resulting spin casted layers show improved morphologies implying better dispersion of the fullerenes and increased short circuit currents. The improvement of the photovoltaic properties of the MEH-PPV/C₆₀ composites has been attributed to the nanosized fullerene domains formed upon phase separation.     

Nanometer‐sized polyradical particles: Organic magnetic dot array formed on a silicon microfabricated substrate

A magnetically active, purely organic dot array was formed by the selective deposition of polyradical nanoparticles on array‐like‐formed pits on a silicon substrate. The nanometer‐sized polyradical particles, poly(4‐methacryoyloxy‐2,2,6,6‐tetramethylpiperidine‐1‐oxyl), were prepared by the emulsion polymerization of 4‐methacryloyloxy‐2,2,6,6‐tetramethylpiperidine‐1‐acetoxyl followed by a deprotection reaction and oxidation in air. The size (diameter) and radical spin concentration of the polyradical nanoparticles were tunable between the polymerization and oxidation conditions. Electrochemical studies revealed the redox property of the polyradical nanoparticles. The magnetic response image of the polyradical nanoparticles was obtained by magnetic force microscopy, reflecting their radical spin concentrations. These results suggested a possible approach for the use of organic polyradical nanoparticles as organic magnetic dot arrays. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 521–530, 2007     

Modification of Surface Forces by Metal Ion Adsorption

Abstract

Sorption of ions may lead to variations in interparticle forces and, thus, changes in the stability of colloidal particles. Chemical interactions between metal ions and colloidal particles modify the molecular structure of the surface, the surface charge, and the electrical potential between colloidal particles. These modifications to the surface and to the electrical double layer due to metal ion sorption are reflected in the interaction force between a particle and another surface, which is measured in this study by atomic force microscopy (AFM). Specifically, AFM is used to investigate the sorption of copper ions from aqueous solutions by silica particles. The influence of metal ion concentration and solution ionic strength on surface forces is studied under transient conditions. Results show that as the metal ion concentration is decreased, charge reversal occurs and a longer period of time is required for the system to reach equilibrium. The ionic strength has no significant effect on sorption kinetics. Furthermore, neither metal concentration nor ionic strength exhibits any effect on sorption equilibria, indicating that for the experimental conditions used in this study, the surface sites of the silica particle are fully occupied by copper ions.     

Real-Time Imaging of the Coil-Globule Transition of Single Adsorbed Poly(2-vinylpyridine) Molecules

Summary: We applied scanning force microscopy to study, in real time, the mobility and reorganisation of single poly(2-vinylpyridine) molecules that were adsorbed on mica and exposed to vapours of ethanol or water. The macromolecules adopted a compact globular conformation in ethanol-saturated vapour and extended to a surface-bound two-dimensional coil in water-saturated vapour. Hence, reversible coil-to-globule conformational transitions of flexible polymer chains were directly visualized with unique molecular resolution.

Left: individual P2VP molecules on mica compacted by exposure to ethanol vapour, right: the same macromolecules extended in water vapour.     

“Bio”‐Macromolecules: Polymer‐Protein Conjugates as Emerging Scaffolds for Therapeutics

Polymer‐protein conjugates are biohybrid macromolecules derived from covalently connecting synthetic polymers with polypeptides. The resulting materials combine the properties of both worlds: chemists can engineer polymers to stabilize proteins, to add functionality, or to enhance activity; whereas biochemists can exploit the specificity and complexity that Nature has bestowed upon its macromolecules. This has led to a wealth of applications, particularly within the realm of biomedicine. Polymer‐protein conjugation has expanded to include scaffolds for drug delivery, tissue engineering, and microbial inhibitors. This feature article reflects upon recent developments in the field and discusses the applications of these hybrids from a biomaterials standpoint.

     

Graft‐crosslinked Copolymers Based on Poly(arylene ether ketone)‐gc‐sulfonated Poly(arylene ether sulfone) for PEMFC Applications

Novel poly(arylene ether ketone) polymers with fluorophenyl pendants and phenoxide‐terminated wholly sulfonated poly(arylene ether sulfone) oligomers are prepared via Ni(0)‐catalyzed and nucleophilic polymerization, respectively, and subsequently used as starting materials to obtain graft‐crosslinked membranes as polymer electrolyte membranes. The phenoxide‐terminated sulfonated moieties are introduced as hydrophilic parts as well as crosslinking units. The chemical structure and morphology of the obtained membranes are confirmed by ¹H NMR and tapping‐mode AFM. The properties required for fuel cell applications, including water uptake and dimensional change, as well as proton conductivity, are investigated. AFM results show a clear nanoscale phase‐separation microstructure of the obtained membranes. The membranes show good dimensional stability and reasonably high proton conductivities under 30–90% relative humidity. The anisotropic proton conductivity ratios (σ_⟂/||) of the membranes in water are in the range 0.65–0.92, and increase with an increase in hydrophilic block length. The results indicate that the graft‐crosslinked membranes are promising candidates for applications as polymer electrolyte membranes.

     

AFM study on the adsorption and aggregation behavior of dissolved humic substances on mica

Humic substances (HS) are a category of naturally occurring, biogenic, heterogeneous organic materials found in or extracted from soils, sediments, and natu- ral waters that can generally be characterized as being yellow-to-black in color, of highly variable relative molecular masses, and refractory[1,2]. Derived from a variety of organic precursors (plant biopolymers such as lignin etc.), plant residues and animal debris via both transformation and synthesis processes[3] under the profound ge…     

Chitosan Macromolecules on a Substrate: Deposition from Solutions in sc CO2 and Reorganisation in Vapours

Specially pretreated chitosan macromolecules possess limited solubility in supercritical carbon dioxide. When deposited on mica substrate from such solutions they adopt somewhat extended conformation. The adsorbed macromolecules become mobile on the interface when exposed to water vapour as revealed by environmental scanning force microscopy. During the exposure in the presence of coadsorbed water layer the chitosan strands demonstrate slight tendency to adopt more compact but still two-dimensional conformation on the substrate.     

Stimuli‐Responsive Hybrid Coatings of Polyelectrolyte Multilayers and Nano‐Patterned Polymer Brushes

A new type of polymeric hybrid coating is created by layer‐by‐layer deposition of polyelectrolyte multilayers (PEM) onto nano‐patterned polymer brushes (NPB). The PEM is a hydrogen‐bonded multilayer consisting of poly(acrylic acid) and poly(acrylamide) and the NPB is derived from a surface reactive rod‐coil block copolymer, polystyrene‐block‐poly[3‐(triethoxysilyl)propylisocyanate]. The thickness of the PEM coating is optimized with respect to the height of the NPB mounds, to yield PEM/NPB hybrid coatings with unique nano‐embossed or nano‐porous structures that can be interchangeable by heating and moisture annealing. The hybrid coating is patternable by the micro‐contact printing method. The results demonstrate that the combination of surface‐bound, hydrophobic NPB layer with hydrophilic PEM films at the nanoscopic level offers a new organic hybrid coating with novel surface properties.

     

Preparation of Size Tunable Amphiphilic Poly(amino acid) Nanoparticles

Size tunable amphiphilic NPs composed of poly(γ‐PGA) and hydrophobic amino acids, such as Phe or Trp, were prepared. To prepare these size‐regulated NPs, γ‐PGA‐g‐Phe or γ‐PGA‐g‐Trp dissolved in DMSO was added to various concentrations of NaCl solution. The γ‐PGA‐Phe and γ‐PGA‐Trp formed monodispersed NPs, and the size of NPs can be easily controlled by NaCl concentration. The different‐sized NPs showed the same structure. The encapsulation of protein into the different‐sized NPs was successfully achieved and the size of protein‐encapsulated γ‐PGA‐Phe NPs was increased when protein was encapsulated.

     

Structure of salted and discharged globules of hydrophobic polyelectrolytes adsorbed from aqueous solutions

In this article, we compare structures of protonated poly(2-vinylpyridine) globules (2D compact coils on the surface) adsorbed on the mica surface from aqueous solution when the shrinking is brought about either by discharging the molecules at an elevated pH or by adding monovalent and polyvalent salts. We study the structure of the PE coils using in situ atomic force microscopy experiments in aqueous solutions in a liquid cell. The abrupt coil-to-globule transition caused by pH changes and the discharge of polymer chains resulted in compact globules. If the pH corresponding to extended coil conformation remains unchanged, the coil shrinks due to the added salt. The size of the globule in the latter case corresponds to the unperturbed dimension of the polymer coil. There is no essential difference in the dimensions of the globules as obtained in the presence of monovalent and multivalent counterions for the studied ionic strength. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1623–1627, 2010