Novel amorphous perfluorocopolymeric system: Copolymers of perfluoro‐2‐methylene‐1,3‐dioxolane derivatives

Perfluorotetrahydro‐2‐methylene‐furo[3,4‐d][1,3]dioxole (monomer I ) and perfluoro‐2‐methylene‐4‐methoxymethyl‐1,3‐dioxolane (monomer II ) are soluble in perfluorinated or partially fluorinated solvents and readily polymerize in solution or in bulk when initiated by a free‐radical initiator, perfluorodibenzoyl peroxide. The copolymerization parameters have been determined with in situ ¹⁹F NMR measurements. The copolymerization reactivity ratios are r _I = 1.80 and r _II = 0.80 in 1,1,2‐trichlorotrifluoroethane at 41 °C and r _I = 0.97 and r _II = 0.85 for the bulk polymerization. These data show that this copolymerization pair has a good copolymerization tendency and yields nearly ideal random copolymers. The copolymers have only one glass‐transition temperature from 101 to 168 °C, depending on the copolymer compositions. Melting endotherms have not been observed in their differential scanning calorimetry traces, and this indicates that all the copolymers with different compositions are completely amorphous. These copolymers are thermally stable (the initial decomposition temperatures are higher than 350 °C under an N₂ atmosphere) and have low refractive indices and high optical transparency from UV to near‐infrared. Copolymer films prepared by casting were flexible and tough. These properties make the copolymers ideal candidates as optical and electrical materials. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1613–1618, 2006     

Radical copolymerization of chlorotrifluoroethylene with 4‐bromo‐3,3,4,4‐tetrafluorobut‐1‐ene

The radical copolymerization of chlorotrifluoroethylene (CTFE) with 3,3,4,4‐tetrafluoro‐4‐bromobut‐1‐ene (BTFB) initiated by tert‐butylperoxypivalate is presented. The microstructures of the obtained copolymers are determined by means of NMR spectroscopies and elemental analysis and show that random copolymers were obtained. A wide range of poly(CTFE‐co‐BTFB) copolymers is synthesized, containing from 17 to 89 mol % of CTFE. In all the cases, CTFE is the less reactive of both comonomers. T_d^10% values, ranging from 163 up to 359 °C, are dependent on the BTFB content. These variations of thermal property are attributed to the increase in the number of C‐H and C‐Br bonds breakdown when the BTFB molar percentage in the copolymer is higher. T_g values range from 19 to 39 °C and a decreasing trend is observed when increasing the amount of BTFB in the copolymer. This observation arises from the higher flexibility of the copolymer when increasing the number of fluorobrominated lateral chains. These original fluoropolymers bearing reactive pendant bromo groups are suitable candidates for various applications. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1714–1720     

Fluorinated copolymers and terpolymers based on vinylidene fluoride and bearing sulfonic acid side‐group

The radical co‐ and terpolymerization of perfluoro(4‐methyl‐3,6‐dioxaoct‐7‐ene) sulfonyl fluoride (PFSVE) with 1,1‐difluoroethylene (or vinylidene fluoride, VDF or VF₂), hexafluoropropene (HFP), chlorotrifluoroethylene (CTFE), and bromotrifluoroethylene (BrTFE) is presented. Although PFSVE could not homopolymerize under radical initiation, it could be copolymerized in solution under a radical initiator with VDF, while its copolymerizations with HFP or CTFE led to oligomers in low yields. The terpolymerizations of PFSVE with VDF and HFP, with VDF and CTFE, or with VDF and BrTFE also led to original fluorinated terpolymers bearing sulfonyl fluoride side‐groups. The conditions of co‐ and terpolymerization were optimized in terms of the nature and the amount of the radical initiators, of the nature of solvents (fluorinated or nonhalogenated), and of the initial amounts of fluorinated comonomers. The different mol % contents of comonomers in the co‐ and terpolymers were assessed by ¹⁹F NMR spectroscopy. A wide range of co‐ and terpolymers containing mol % of PFSVE functional monomer ranging from 10 to 70% was produced. The kinetics of copolymerization of VDF with PFSVE enabled to assess the reactivity ratios of both comonomers: r_VDF = 0.57 ± 0.15 and r_PFSVE = 0.07 ± 0.04 at 120 °C. The thermal and physicochemical properties were also studied. Moreover, the glass transition temperatures (T_gs) of poly(VDF‐co‐PFSVE) copolymers containing different amounts of VDF and PFSVE were determined and the theoretical T_g of poly(PFSVE) homopolymer was deduced. Then, the hydrolysis of the ? SO₂F into ? SO₃H function was investigated and enabled the synthesis of fluorinated copolymers bearing sulfonic acid functions. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1814–1834, 2007     

Synthesis and properties of copolymers of methyl methacrylate with 2,3,4,5,6‐pentafluoro and 4‐trifluoromethyl 2,3,5,6‐tetrafluoro styrenes: An intrachain interaction between methyl ester and fluoro aromatic moieties

2,3,4,5,6‐Pentafluoro and 4‐trifluoromethyl 2,3,5,6‐tetrafluoro styrenes were readily copolymerized with methyl methacrylate (MMA) by a free radical initiator. The copolymers were soluble in tetrahydrofuran and acetone. The films obtained were transparent and flexible. The glass transition temperatures (T_gs) of the copolymers were found positively deviated from the Gordon–Taylor equation. The positive deviation could be accounted for by dipole–dipole intrachain interaction between the methyl ester group of MMA and the highly fluorinated aromatic moiety, which resulted in a decrease in the segmental mobility of the polymer chains and the enhanced T_g values of the copolymers. The water absorption of PMMA was greatly decreased by copolymerization of MMA with the highly fluorinated styrenes. With as little as 10 mol % of pentafluoro styrene content in the copolymer, the water absorption was decreased to one‐third of that for pure PMMA. The fluorinated styrenes‐MMA copolymers were thermally stable up to 420 °C under air and nitrogen atmospheres. With 50 mol % of MMA in the copolymer, the copolymer was still stable up to 350 °C. Since these copolymers contain a large number of fluorine atoms, the light absorption in the region of the visible to near infrared is decreased in comparison with nonfluorinated polymers. Thus, these copolymers may be suitable for application in optical devices, such as optical fibers and waveguides. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Kinetics of radical copolymerization of [1‐(fluoromethyl)vinyl]benzene with chlorotrifluoroethylene

The synthesis of [1‐(fluoromethyl)vinyl]benzene (or α‐(fluoromethyl)styrene, FMB) and its radical copolymerization with chlorotrifluorethylene (CTFE), initiated by tert‐butyl peroxypivalate (TBPPi) are presented. The allyl monomer [H₂C = C(CH₂F)C₆H₅] was obtained by electrophilic fluorodesilylation of trimethyl(2‐phenylprop‐2‐en‐1‐yl)silane in 93% yield. A series of seven copolymerization reactions were carried out starting from initial [CTFE]₀/([FMB]₀ + [CTFE]₀) molar ratios ranging from 19.6 to 90.0 mol %. The molar compositions of the obtained poly(CTFE‐co‐FMB) copolymers were assessed by means of ¹⁹F nuclear magnetic resonance spectroscopy. Statistic copolymers were produced with molar masses ranging between 13,800 and 25,600 g/mol. From the Kelen and Tudos method, the kinetics of the copolymerization led to the determination of the reactivity ratios, r_i, of both comonomers (r_CTFE = 0.4 ± 0.2 and r_FMB = 3.7 ± 1.8 at 74 °C) showing that FMB is more reactive than CTFE as well as other halogenated or nonhalogenated monomers involved in the radical copolymerization with CTFE. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3843–3850, 2007     

Grafting polymerization of styrene onto alternating terpolymers based on chlorotrifluoroethylene,hexafluoropropylene, and vinyl ethers,and their modification into ionomers bearing ammonium side‐groups

The grafting polymerization of styrene initiated by the alkyl chloride groups of poly(CTFE‐alt‐VE) and poly[(CTFE‐alt‐VE)‐co‐(HFP‐alt‐VE] copolymers (where CTFE, HFP, and VE stand for chlorotrifluoroethylene (CTFE), hexafluoropropylene (HFP), and vinyl ether (VE), respectively) followed by the chemical modification of the polystyrene grafts are presented. First, the fluorinated alternating copolymers were produced by radical copolymerization of CTFE (with HFP) and VE. Second, atom transfer radical polymerization enabled the grafting polymerization of styrene in the presence of the poly(CTFE‐alt‐VE)‐macroinitiator using the alkyl chloride group of CTFE as the initiation site. Kinetics of the styrene polymerization indicated that such a grafting had a certain controlled character. For the first time, grafting of polystyrene onto alternating fluorinated copolymers has been achieved. Differential scanning calorimetry thermograms of these graft copolymers exhibited two glass transition temperatures assigned to both amorphous domains of the polymeric fluorobackbone (ranging from ?20 to +56 °C) and the polystyrene grafts (ca. 95 °C). The thermostability of these copolymers increased on grafting. Thermal degradation temperatures at 5% weight loss were ranging from 193 to 305 °C when the polystyrene content varied from 81 to 27%. Third, chloromethylation of the polystyrene grafts followed by the cationization of the chloromethyl dangling groups led to original ammonium‐containing graft copolymers. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis and characterization of novel alternating fluorinated copolymers bearing oligo(ethylene oxide) side chains

The synthesis and characterization of novel poly(CTFE‐g‐oligoEO) graft copolymers [chlorotrifluoroethylene (CTFE) and ethylene oxide (EO)] are presented. First, vinyl ether monomers bearing oligo(EO) were prepared by transetherification of ω‐hydroxyoligo(EO) with ethyl vinyl ether catalyzed by a palladium complex in 70–84% yields. Two vinyl ethers of different molecular weights (three and 10 EO units) were thus obtained. Then, radical copolymerization of the above vinyl ethers with CTFE led to alternating poly(CTFE‐alt‐VE) copolymers that bore oligo(OE) side chains in satisfactory yields (65%). These original poly(CTFE‐g‐oligoEO) graft copolymers were characterized by ¹H, ¹⁹F, and ¹³C NMR spectroscopy. Their molecular weights reached 19,000 g mol^?1, and their thermal properties were investigated while their glass transition temperatures ranged between ?42 and ?36 °C. Their thermogravimetric analyses under air showed decomposition temperatures of 270 °C with 10% weight loss (T_d,10%). These novel copolymers are of potential interest as polymer electrolytes in lithium ion batteries, showing room temperature conductivities ranging from 4.49 × 10^?7 to 1.45 × 10^?6 S cm^?1 for unplasticized material. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis and characterization of original alternated fluorinated copolymers bearing glycidyl carbonate side groups

A vinyl ether bearing a carbonate side group (2‐oxo‐1,3‐dioxolan‐4‐yl‐methyl vinyl ether, GCVE) was synthesized and copolymerized with various commercially available fluoroolefins [chlorotrifluoroethylene (CTFE), hexafluoropropylene (HFP), and perfluoromethyl vinyl ether (PMVE)] by radical copolymerization initiated by tert‐butyl peroxypivalate. Although HFP, PMVE, and vinyl ether do not homopolymerize under radical conditions, they copolymerized easily yielding alternating poly(GCVE‐alt‐F‐alkene) copolymers. These alternating structures were confirmed by elemental analysis as well as ¹H, ¹⁹F, and ¹³C NMR spectroscopy. All copolymers were obtained in good yield (73–85%), with molecular weights ranging from 3900 to 4600 g mol^?1 and polydispersities below 2.0. Their thermogravimetric analyses under air showed decomposition temperatures at 10% weight loss (T_d,10%) in the 284–330°C range. The HFP‐based copolymer exhibited a better thermal stability than those based on CTFE and PMVE. The glass transition temperatures were in the 15–65°C range. These original copolymers may find potential interest as polymer electrolytes in lithium ions batteries. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis and polymerization of fluorinated monomers bearing a reactive lateral group. XIV. Radical copolymerization of vinylidene fluoride with methyl 1,1‐dihydro‐4,7‐dioxaperfluoro‐5,8‐dimethyl non‐1‐enoate

The radical copolymerization in solution of vinylidene fluoride (VDF; or 1,1‐difluoroethylene) with methyl 1,1‐dihydro‐4,7‐dioxaperfluoro‐5,8‐dimethyl non‐1‐enoate (MDP) initiated by di‐tert‐butyl peroxide is presented. Six copolymerization reactions were investigated with initial [VDF]₀/[MDP]₀ molar ratios of 35/65 to 80/20. Both of these comonomers copolymerized in this range of copolymerization. Moreover, these comonomers homopolymerized separately under these conditions. The copolymer compositions of these random copolymers were calculated by means of ¹⁹F NMR spectroscopy, which allowed the quantification of the respective amounts of each monomeric unit in the copolymers. The Tidwell–Mortimer method was used for the assessment of the reactivity ratios (r_i) of both comonomers, which showed a higher incorporation of MDP in the copolymers (r_MDP = 2.41 ± 2.28 and r_VDF = 0.38 ± 0.21 at 120 °C). The Alfrey–Price Q and e values of the trifluoroallyl monomer MDP were calculated to be 0.024 (from Q_VDF = 0.008) or 0.046 (from Q_VDF = 0.015) and 0.70 (vs e_VDF = 0.40) or 0.80 (vs e_VDF = 0.50), respectively, indicating that MDP was an electron‐accepting monomer. The thermal properties of these fluorinated copolymers were also determined. Except for those containing a high amount of VDF, the copolymers were amorphous. Each showed one glass‐transition temperature (T_g) only, and with known laws of T_g's, T_g of the MDP homopolymer was assessed. It was compared to that obtained from the direct radical homopolymerization of MDP and discussed. Indeed, these two values were close (T_g = ?3 °C). Thermogravimetric analyses were performed, and they showed that the copolymers were rather thermostable because the thermal degradation occurred at 280 °C. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3109–3121, 2003     

Thermal and mechanical properties of random copolymers of diisopropyl fumarate with 1‐adamantyl and bornyl acrylates with high glass transition temperatures

We report the thermal, optical, and mechanical properties of random copolymers produced by radical copolymerizations of diisopropyl fumarate (DiPF) with 1‐adamantyl acrylate (AdA) and bornyl acrylate (BoA). The effects of a methylene spacer included in the main chain and bulky ester alkyl groups in the side chain on the copolymer properties are discussed. The produced copolymers are characterized by NMR and UV–vis spectroscopies, size exclusion chromatography, thermogravimetric analysis, differential scanning calorimetry, and dynamic mechanical analysis (DMA). The copolymerization rate and the molecular weight of the copolymers increase with an increase in the acrylate content in feed during the copolymerization (M_w = 25–110 × 10³). The onset temperature of decomposition (T_d5) and the glass transition temperature (T_g) of the copolymers also increase according to the content of the acrylate units (T_d5 = 296–329 °C and 281–322 °C, T_g = 80–133 °C and 91–106 °C for the copolymers of DiPF with AdA and BoA, respectively). Transparent and flexible copolymer films are obtained by a casting method and their optical properties such as transparency and refractive indices are investigated (n_D = 1.478–1.479). The viscoelastic data of the copolymers are collected by DMA measurements under temperature control. The storage modulus decreases at a temperature region over the T_g value of the copolymers, depending on the structure and amount of the acrylate units. The sequence structure of the copolymers is analyzed based on monomer reactivity ratios and composition in order to discuss the copolymer properties related to chain rigidity and sequence length distribution. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 288–296     

Synthesis of methallylic monomers bearing ammonium side‐groups and their radical copolymerization with chlorotrifluoroethylene

Methallylic monomers bearing triethyl or 4‐diazabicyclo[2.2.2]octane (DABCO) ammonium side‐groups are prepared and copolymerized with chlorotrifluoroethylene (CTFE). First, three different monomers are synthesized from chloro‐2‐methylprop‐1‐ene or 3‐chloro‐2‐chloromethylprop‐1‐ene in fair to good yields (57–95%). Then, several parameters (initiators, aqueous or solution processes, temperature) of the radical copolymerization of these monomers with chlorotrifluoroethylene are investigated. Various initiators are tested in the presence of ammonium perfluorooctanoate (APFO) as water‐soluble surfactant, and tert‐butyl peroxypivalate/APFO leads to the best results in a mixed solvent (H₂O/CH₃CN/C₄F₅H₅). In all experiments, the radical copolymerization shows that CTFE is more reactive than the methallylic monomer as evidenced by the characterization of poly(CTFE‐co‐M) copolymer by nuclear magnetic resonance spectroscopy and elemental analysis. Thermal degradation of these copolymers by thermogravimetric analyses indicates that the copolymers are stable up to 180 °C without any degradation and have a T_d,10% above 300 °C. Finally, their ionic exchange capacities range between 0.94 and 1.69 meq g^?1. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1721–1729     

Pseudopoly(amino acid)s: Copolymerization of trans‐4‐hydroxy‐L‐proline and α‐hydroxy acids

A series of novel copolymers of trans‐4‐hydroxy‐L ‐proline (Hpr) and α‐ hydroxy acids [D,L ‐mandelic acid (DLMA) and D,L ‐lactic acid (DLLA)] were synthesized via direct melt copolymerization with stannous octoate as a catalyst. These new copolymers had pendant amine functional groups along the polymer backbone chain. The optimal reaction conditions for the synthesis of the copolymers were obtained with 4 wt % stannous octoate at 140 °C under vacuum for 16 h. The synthesized copolymers were characterized by IR spectrophotometry, proton nuclear magnetic resonance, differential scanning calorimetry, and Ubbelohde viscometry. The effects of the kinds of comonomers and the comonomer molar ratio on the polycondensation and glass‐transition temperature (T_g) were investigated. The T_g's of the copolymers shifted to lower temperatures with an increasing comonomer molar ratio. As expected, the T_g's of the N‐Z‐Hpr/DLMA copolymers were higher than the N‐Z‐Hpr/DLLA copolymers, the pendant groups on the monomers (N‐Z‐Hpr) became larger and more flexible, and the T_g's of the resulting polymers declined. © 2001 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 39: 724–731, 2001     

Synthesis and Characterization of Fluorinated Polyimide Derived from 3,3′‐Diisopropyl‐4,4′‐diaminodiphenyl‐3′′,4′′‐difluorophenylmethane

A novel aromatic diamine monomer, 3,3′‐diisopropyl‐4,4′‐diaminodiphenyl‐3′′,4′′‐difluorophenylmethane (PAFM), was successfully synthesized by coupling of 2‐isopropylaniline and 3,4‐difluorobenzaldehyde. The aromatic diamine was adopted to synthesize a series of fluorinated polyimides by polycondensation with various dianhydrides: pyromellitic dianhydride (PMDA), 3,3′,4,4′‐biphenyltetracarboxylic dianhydride (BPDA), 4,4′‐oxydiphthalic anhydride (ODPA) and 3,3′,4,4′‐benzophenone tetracarboxylic dianhydride (BTDA) via the conventional one‐step method. These polyimides presented excellent solubility in common organic solvents, such as N,N‐dimethylformamide (DMF), N,N‐dimethyl acetamide (DMAc), dimethyl sulfoxide (DMSO), N‐methyl‐2‐pyrrolidone (NMP), chloroform (CHCl₃), tetrahydrofuran (THF) and so on. The glass transition temperatures (T_g) of fluorinated polyimides were in the range of 260–306°C and the temperature at 10% weight loss in the range of 474–502°C. Their films showed the cut‐off wavelengths of 330–361 nm and higher than 80% transparency in a wavelength range of 385–463 nm. Moreover, polymer films exhibited low dielectric properties in the range of 2.76–2.96 at 1 MHz, as well as prominent mechanical properties with tensile strengths of 66.7–97.4 MPa, a tensile modulus of 1.7–2.1 GPa and elongation at break of 7.2%–12.9%. The polymer films also showed outstanding hydrophobicity with the contact angle in the range of 91.2°–97.9°.     

Controlled copolymerization of vinyl acetate with 1‐alkenes and their fluoro derivatives by degenerative transfer

The degenerative transfer copolymerization of vinyl acetate with ethene and higher 1‐alkenes, as well as their fluoro derivatives (R_fCH?CH₂), under mild conditions was carried out using AIBN as the initiator and ethyl iodoacetate as the control agent. The obtained random copolymers were fairly high in alkene content, with high molecular weights and relatively narrow polydispersities. The quasi‐living nature of the copolymerization allowed the synthesis of a block terpolymer by sequential addition of two different 1‐alkene comonomers to a vinyl acetate copolymerization system. The fluorinated side chains of vinyl acetate/fluoro alkene copolymers segregate toward the air‐side of thin films, resulting in advancing water contact angle as high as 114°. 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3728–3736, 2005     

Novel anhydrous proton conducting copolymers of 1‐vinyl‐1,2,4‐triazole and diisopropyl‐p‐vinylbenzyl phosphonate

Phosphonic acid functional polymers are currently of interest because of their high proton conductivity in humidified and anhydrous systems. In addition, heterocyclic compounds are used in anhydrous proton conducting polymer membranes. In that study, a new copolymer based on 1‐vinyl‐1,2,4‐triazole (VTri) and diisopropyl‐p‐vinylbenzyl phosphonate (VBP) was synthesized, and their thermal, chemical, and proton conducting properties were investigated. The copolymers were synthesized by free radical copolymerization of the corresponding monomers at several monomer feed ratios to obtain P(VTri‐co‐VBP) copolymers. The copolymer samples were then hydrolyzed to produce poly(vinyl triazole‐co‐vinyl phosphonic acid) copolymers. The composition of the copolymers was determined by elemental analysis. The copolymerization and hydrolysis reactions were verified by Fourier transform infrared spectroscopy and ion exchange capacity measurements. Thermogravimetry analysis indicates that the copolymers are thermally stable up to 300°C. In order to increase the proton conductivity, the copolymers were doped with H₃PO₄ at several stoichometric ratios. The proton conductivity increases with triazole and phosphoric acid content. In the absence of humidity, the copolymer electrolyte, P(VTri‐co‐VBPA)1:0.5 X = 2, showed a proton conductivity of 0.005 S/cm at 150°C. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis of novel cyclic olefin polymers with excellent transparency and high glass‐transition temperature via gradient copolymerization of bulky cyclic olefin and cis‐cyclooctene

Novel cyclic olefin polymers (COPs) with excellent transparency and high glass‐transition temperature (T_g) synthesized from bulky norbornene derivative, exo‐1,4,4a,9,9a,10‐hexahydro‐9,10(1',2')‐benzeno‐l,4‐methanoanthracene (HBMN), and cis‐cyclooctene (COE) by ring‐opening metathesis copolymerization utilizing the “first‐generation Grubbs” catalyst, RuCl₂(PCy₃)₂(CHPh), and subsequent hydrogenation was reported herein. To get amorphous copolymers, it was of great importance to control the feed ratios and the polymerization time for gradient copolymerization. All these copolymers showed very high T_gs (141.1–201.2 °C), which varied with the content of HBMN. The films of the gradient copolymers with only one T_g were highly transparent. On the contrary, all the block copolymers synthesized through sequential addition showed two thermal transition temperatures, T_g and melt temperature (T_m), and the films of these block copolymers were opaque. The mechanical performances of the COPs were also investigated. It is the first report that transparent COP could be prepared from bulky norbornene derivative and monocyclic olefin. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3240–3249     

Tuning the LCST of poly(2‐cyclopropyl‐2‐oxazoline) via gradient copolymerization with 2‐ethyl‐2‐oxazoline

Poly(2‐propyl‐oxazoline)s can be prepared by living cationic ring‐opening polymerization of 2‐oxazolines and represent an emerging class of biocompatible polymers exhibiting a lower critical solution temperature in aqueous solution close to body temperature. However, their usability is limited by the irreversibility of the transition due to isothermal crystallization in case of poly(2‐isopropyl‐2‐oxazoline) and the rather low glass transition temperatures (T_g < 45 °C) of poly(2‐n‐propyl‐2‐oxazoline)‐based polymers. The copolymerization of 2‐cyclopropyl‐2‐oxazoline and 2‐ethyl‐2‐oxazoline presented herein yields gradient copolymers whose cloud point temperatures can be accurately tuned over a broad temperature range by simple variation of the composition. Surprisingly, all copolymers reveal lower T_gs than the corresponding homopolymers ascribed to suppression of interchain interactions. However, it is noteworthy that the copolymers still have T_gs > 45 °C, enabling convenient storage in the fridge for future biomedical formulations. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3118–3122     

Statistical copolymers of norbornene and 5‐vinyl‐2‐norbornene by a ditungsten complex mediated ring‐opening metathesis Polymerization: Synthesis,thermal properties,and kinetics of thermal decomposition

Statistical copolymers of norbornene (NBE) with 5‐vinyl‐2‐norbornene (VNBE) were prepared by ring‐opening metathesis polymerization, employing the triply bonded ditungsten complex Na[W₂(μ‐Cl)₃Cl₄(THF)₂].(THF)₃. NMR measurements revealed that the side vinyl groups of the VNBE monomer remain intact during the copolymerization reaction. The reactivity ratios were estimated using the Finemann–Ross (FR), the inverted FR, and the Kelen–Tüdos graphical methods. Structural parameters of the copolymers were obtained by calculating the dyad sequence fractions, which were derived using the monomer reactivity ratios. The glass transition temperatures, T_g, of the copolymers were measured by differential scanning calorimetry measurements and were examined in the frame of several theoretical equations allowing the prediction of these T_g values. The best fit was obtained using methods that take into account the monomer sequence distribution of the copolymers. Finally, the kinetics of the thermal decomposition of the copolymers was studied by thermogravimetric analysis in the frame of the Ozawa–Flynn–Wall and Kissinger methods. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4835–4844     

Highly fluorinated low‐molecular‐weight photoresists for optical waveguides

A series of highly fluorinated polymers were synthesized by copolymerization of 2,3,4,5,6‐pentafluorostyrene (PFS) and fluorinated styrene derivate monomer (FSDM). Their chemical structure were confirmed by ¹H NMR, ¹³C NMR, and ¹⁹F NMR spectra. The refractive index and cross‐linking density of the polymers can be tuned and controlled by monitoring the feed ratio of comonomers. A series of negative‐type low‐molecular‐weight fluorinated photoresists (NFPs) were prepared by composing of fluorinated polystyrene derivates (FPSDs), diphenyl iodonium salt as a photoacid generator (PAG) and solvent. The polymer films prepared from NFP by photocuring exhibited excellent chemical resistance and thermal stabilities (T_d ranged from 230.5 to 258.1 °C). A clear negative pattern was obtained through direct UV exposure and chemical development. For waveguides without upper cladding, the propagation loss of the channel waveguides was measured to be 0.25 dB/cm at 1550 nm. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Copolymerization of norbornene and 5‐norbornene‐2‐yl acetate using novel bis(β‐ketonaphthylamino)Ni(II)/B(C6F5)3/AlEt3 catalytic system

Vinyl‐type copolymerization of norbornene (NBE) and 5‐NBE‐2‐yl‐acetate (NBE‐OCOMe) in toluene were investigated using a novel homogeneous catalyst system based on bis(β‐ketonaphthylamino)Ni(II)/B(C₆F₅)₃/AlEt₃. The copolymerization behavior as well as the copolymerization conditions, such as the levels of B(C₆F₅)₃ and AlEt₃, temperature, and monomer feed ratios, which influence on the copolymerization were examined. Without combination of AlEt₃, the catalytic bis(β‐ketonaphthylamino)Ni(II)/B(C₆F₅)₃ exhibited very high catalyst activity for polymerization of NBE. Combination of AlEt₃ in catalyst system resulted in low conversion for polymerization of NBE. For copolymerization of NBE and NBE‐OCOMe, involvement of AlEt₃ in catalyst is necessary. Slight addition of NBE‐OCOMe in copolymerization of NBE and NBE‐OCOMe gives rise to significant increase of catalyst activity for catalytic system bis(β‐ketonaphthylamino)Ni(II)/B(C₆F₅)₃/AlEt₃. Nevertheless, excess increase of the NBE‐OCOMe content in the comonomer feed ratios results in decrease of conversion as well as activity of catalyst. The achieved copolymers were confirmed to be vinyl‐addition copolymers through the analysis of FTIR, ¹H NMR, and ¹³C NMR spectra. ¹³C NMR studies further revealed the composition of the copolymer and the incorporation rate was 7.6–54.1 mol % ester units at a content of 30–90 mol % of the NBE‐OCOMe in the monomer feeds ratios. TGA analysis results showed that the copolymer exhibited good thermal stability (T_d > 410 °C) and failed to observe the glass transitions temperature over 300 °C. The copolymers are confirmed to be noncrystalline by WAXD analysis results and show good solubility in common organic solvents. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3990–4000, 2009