Summary: The polymerization of ε‐caprolactone (CL) in the presence of HCl · Et2O by an activated monomer mechanism was performed to synthesize diblock or triblock copolymers composed of poly(ethylene glycol) (PEG) and poly(ε‐caprolactone) (PCL). The obtained PCLs had molecular weights close to the theoretical values calculated from the CL to PEG molar ratios and exibited monomodal GPC curves. We successfully prepared PEG and PCL block copolymers by a metal‐free method.
The non‐metal catalyzed living ring‐opening polymerisation of ε‐caprolactone by PEG. 相似文献
Summary: This work reports a new type of poly(ε‐caprolactone) (PCL) robust hollow sphere with controllable biodegradability, produced by grafting PCL shells from the surface of silica sphere cores and removing the template cores. Bis(ε‐caprolactone‐4‐yl) (BCY) composed of two ε‐caprolactone molecules was used as the crosslinker, which not only greatly strengthened the PCL hollow spheres but also brought hardly any non‐biodegradable component into the system. Solubility experiments and biodegradation tests show that the crosslinked PCL hollow spheres were robust both in water and acetone, and were completely biodegradable with characteristics of controllable biodegradability according to the content of the BCY. The Rhodamine release test indicated that the release rate of encapsulated drugs in the PCL hollow spheres was controlled by diffusion and the biodegradability of the PCL molecules, and the latter mechanism will dominate when more enzymes are involved.
Reaction scheme for synthesis of linear and crosslinked hollow poly(ε‐caprolactone) spheres. 相似文献
Aliphatic polyesters containing thioester linkages were enzymatically prepared by both the copolymerization of lactone with mercaptoalkanoic acid and by the transesterification of polyesters with mercaptoalkanoic acids. The enzymatic copolymerization of ε‐caprolactone with 11‐mercaptoundecanoic acid (11MU) and 3‐mercaptopropionic acid (3MP) was performed under reduced pressure using an immobilized lipase from Candida antarctica (CA). The transesterification of poly(ε‐caprolactone) and poly[(R)‐3‐hydroxybutyrate] was carried out with 11MU and 3MP using lipase CA under reduced pressure.
New amphiphilic graft copolymers that have a poly(ε‐caprolactone) (PCL) biodegradable hydrophobic backbone and poly(4‐vinylpyridine) (P4VP) or poly(2‐(N,N‐dimethylamino)ethyl methacrylate) (PDMAEMA) hydrophilic side chains have been prepared by anionic polymerization of the corresponding 4VP and DMAEMA monomers using a PCL‐based macropolycarbanion as initiator. The water solubility of these amphiphilic copolymers is improved by quaternization, which leads to fully water‐soluble cationic copolymers that give micellar aggregates in deionized water with diameters ranging from 65 to 125 nm. In addition, to improve the hydrophilicity of PCL‐g‐P4VP, grafting of poly(ethylene glycol) (PEG) segments has been carried out to give a water‐soluble double grafted PCL‐g‐(P4VP;PEG) terpolymer.
L,L ‐lactide (LA) and ε‐caprolactone (CL) block copolymers have been prepared by initiating the poly(ε‐caprolactone) (PCL) block growth with living poly(L,L ‐lactide) (PLA*). In the previous attempts to prepare block copolymers this way only random copolyesters were obtained because the PLA* + CL cross‐propagation rate was lower than that of the PLA–CL* + PLA transesterification. The present paper shows that application of Al‐alkoxide active centers that bear bulky diphenolate ligands results in efficient suppression of the transesterification. Thus, the corresponding well‐defined di‐ and triblock copolymers could be prepared.
Films of an α‐cyclodextrin/poly(ε‐caprolactone) inclusion complex have been successfully prepared and show high transparency and heat resistance in comparison to the pure polymer film. The physical properties, such as transparency, mechanical properties, and thermal stability, of the α‐CD‐PCL‐IC films are found to depend on the α‐cyclodextrin‐to‐polymer stoichiometry.
A new functional lactone, α‐iodo‐ε‐caprolactone (αIεCL), was synthesized from ε‐caprolactone by anionic activation using a non‐nucleophilic strong base (lithium diisopropylamide) followed by an electrophilic substitution with iodine chloride. Ring‐opening (co)polymerizations of the resulting monomer with ε‐caprolactone were carried out using tin 2‐ethylhexanoate as a catalyst in toluene at 100 °C. Homopolymerization of αIεCL was achieved, and poly(αIεCL) was fully characterized by SEC, 1H NMR and elemental analysis. Random copolymerizations of αIεCL with εCL were controlled with experimental molecular weights close to the theoretical values, narrow molecular weight distributions and a good agreement between experimental and theoretical molar compositions of αIεCL.
Summary: Microwave‐assisted ring‐opening polymerization of ε‐caprolactone in the presence of 1‐butyl‐3‐methylimidazolium tetrafluoroborate ionic liquid using zinc oxide as a catalyst is investigated. By adding 30 wt.‐% ionic liquid, poly(ε‐caprolactone) with a weight‐average molar mass of 28 500 g · mol−1 is obtained at 85 W for 30 min. The results indicate that the polymerization could be efficiently enhanced in the presence of ionic liquids under microwave irradiation because ionic liquids can effectively absorb microwave energy.
Summary: A new class of poly(arylene ethynylene)s (PAEs) containing an electron‐deficient N‐alkylphthalimide unit was prepared by means of a Sonogashira reaction. Complete solubility of the PAEs was observed by utilizing a 2,6‐diisopropylphenyl side chain. The chemical structure of the novel soluble polymer 3c was confirmed by NMR spectra, whereas the insoluble polymers were characterized by elemental analysis and IR spectra. Fluorescence measurements of 3c indicate a rigid structure and high symmetry in the excited state.
Summary: The microwave (MW)‐assisted lipase‐catalyzed ring‐opening polymerization of ε‐caprolactone in boiling solvents was investigated for the first time. In case of boiling toluene or benzene the MW‐assisted reaction proceeded significantly slower compared to oil bath heating. On the other hand, using boiling diethyl ether as solvent, an increase of the polymerization rate due to MW irradiation was found. Yield, molecular weight measurements, and MALDI‐TOF analysis supported the results.
Reactivity of the MW‐assisted ring‐opening polymerization of ε‐caprolactone compared with conventional thermal heating in different solvents. 相似文献
A novel preparation method for the core‐shell type biodegradable polyesters or biodegradable materials grafted with biodegradable polyesters was developed by alkaline surface treatment of biodegradable polyester films and subsequent enzymatic polymerization of aliphatic lactones, one example of which is shown in this study, i.e., the preparation of poly(L ‐lactide) (PLLA) film grafted with poly(ε‐caprolactone). It is revealed that only alkaline surface treatment or the combination of alkaline surface treatment and enzyme‐catalyzed grafting, the former and the latter, respectively accelerating and delaying the enzymatic degradation of PLLA, will give PLLA materials having a wide variety of biodegradability. Also, the specificity of the enzyme used for hydrolysis could be used to confirm the grafted chain species.
Spherical single‐chain‐particles of poly(N‐isopropylacrylamide) were prepared in aqueous solution above the lower critical solution temperature upon the addition of sodium dodecyl sulfate. The size of the single‐chain‐particles was investigated by means of transmission electron microscopy and viscosity measurements of the corresponding solutions, indicating the absence of inter‐chain entanglements among the single‐chain‐particles.
Schematic of the preparation of PNIPAM single‐chain‐globules in solution. 相似文献
Two novel tetra‐ and hexahydroxy functionalized perylene chromophores have been used as initiators for the Sn(oct)2 catalyzed ring‐opening polymerization of different lactones. The arms of the resulting star polymers were comprised of either crystallizable poly(L ‐lactide) or poly(ε‐caprolactone) arms or of amorphous poly[γ‐(tert‐amyl)‐ε‐caprolactone] chains. The star polymers were investigated by differential scanning calorimetry, X‐ray scattering and dynamic mechanical and optical spectroscopy. Whereas the thermal properties of the poly(ε‐caprolactone) stars were barely affected by the star topology, crystallization of the poly(L ‐lactide) stars was strongly hindered by the star‐shaped architecture. Interestingly, for the amorphous poly[γ‐(tert‐amyl)‐ε‐caprolactone] stars a decrease in Tg with increasing chain length was found, reflecting the declining influence of the rigid perylene core on segmental mobility with increasing arm length. While the solid state and solution optical properties of high molar mass polyester stars were identical, the excitation and fluorescence emission spectra of spin‐coated films of the low molecular weight polymers revealed a red shift, pointing towards perylene – perylene interactions in these samples. The optical spectroscopy experiments suggested that arm length, rather than the number of arms, is the most important parameter determining encapsulation and preventing aggregation of the perylene core moieties in the solid state.
This communication details the successful synthesis of low polydispersity core cross‐linked star (CCS) polymers via DPE‐mediated polymerisation. We demonstrate the ability to produce poly(methyl methacrylate) and poly(acrylonitrile) CCS polymers that are currently inaccessible via the two most common non‐metal‐based controlled radical polymerisation techniques (NMP and RAFT polymerisations).
A compositional graded film of poly(ε‐caprolactone) (PCL) with 4,4′‐thiodiphenol (TDP), in the film thickness direction, was fabricated by self‐diffusing of TDP in the PCL melt. We found out the self‐bending deformation of the gradient film, which bent into a rolled‐up shape by itself. The initial shape of the film was flat when the sample was quenched from the melt. Upon the fast crystallization of PCL, the gradient film bent to the side with low TDP content. Then, after PCL crystallized the film bent to the opposite direction, that is, to the side with high TDP content. This bending to the TDP rich region was induced by not only the crystallization of PCL but also mass transfer due to the diffusion of TDP from TDP rich region to poor region.
Amphiphilic poly[(ε‐caprolactone)‐co‐glycolide]‐block‐poly(ethylene glycol)‐block‐poly[(ε‐caprolactone)‐co‐glycolide) [P(CL‐GL)‐PEG‐P(CL‐GL)] triblock copolymers with different average lengths of caproyl sequences (LCL) were synthesized by ring‐opening polymerization at different temperatures. A 25% aqueous solution of the copolymer with LCL = 11.0 formed a gel, owing to strong crystallinity‐induced hydrophobicity at low temperature, and underwent a gel‐sol transition (UCST behavior) when the temperature was increased to 40 °C. In contrast, the solution of copolymer with LCL = 6.7 underwent a sol‐gel transition (LCST behavior) due to micelle aggregation. However, a clear sol‐turbid sol phase transition was observed for the copolymer with more random microstructures (LCL = 5.2).
We report the simple one‐pot synthesis of size tunable zinc oxide nanoparticles (ZnO NPs) out of an organometallic ZnO precursor using the self‐assembly of solution phase polystyrene‐block‐poly(2‐vinylpyridine) micelles. The resulting hybrid material could be deposited on various substrates in a straightforward manner with the NPs showing size‐dependent absorption and photoluminescence due to the quantum‐size effect. We compare the results to the assembly of preformed NPs which are selectively incorporated in the poly(2‐vinylpyridine) core of the micelles due to the high affinity of ZnO to vinylpyridine.
Summary: We demonstrate a novel approach for constructing photoactive multilayer films in which the aggregation of fluorescing molecules is effectively eliminated. In the films formed via a layer‐by‐layer electrostatic self‐assembly technique, the core‐shell amphiphilic copolymer, poly[(sodium 4‐styrenesulfonate)‐block‐vinylnaphthalene], was deposited. The isolated cores served as nanosized host sites for photoactive guest molecules (pyrene, perylene). The efficient energy transfer between polymeric chromophores and perylene molecules was observed.
AFM image of a nanostructured polymeric film prepared via a layer‐by‐layer technique and containing photoactive block copolymer poly[(sodium 4‐styrenesulfonate)‐block‐vinylnaphthalene]. Below is the representative height profile taken along the drawn line. 相似文献
Microporous films consisting of two‐dimensionally ordered void structures ‐ so‐called honeycomb films ‐ were produced by evaporation of polymer solutions under high humidity. Two types of poly(vinyl cinnamate)s were used: A newly synthesized amphiphilic poly(vinyl cinnamate) and a mixture of a commercial poly(vinyl cinnamate) and an amphiphilic polyion complex. Photo‐crosslinking of the honeycomb structure could be achieved by UV irradiation while completely retaining the film morphology. The crosslinked films showed excellent stability against organic solvents.
Summary: A protection‐graft‐deprotection method was developed to prepare chitosan‐g‐polycaprolactone graft copolymers, during which the ring‐opening copolymerization of ε‐caprolactone onto phthaloylchitosan (PHCS) happened without any additional catalysis. The intermediate PHCS was introduced primarily to protect the active amino group of chitosan. After controlled experiments, the phthalimido compound was proposed to be a novel kind of organic catalyst for the ring‐opening polymerization of caprolactone monomers, while the hydroxyl group acted as an initiator. Hence, in this graft system, PHCS was endowed with both self‐catalysis and self‐initiation at the same time, and the PCL side chains grew from the hydroxyl groups of the chitosan backbone.
