Titanium complexes bearing amine bis(phenolate) ligands: Synthesis,structure and catalysis in ring‐opening polymerization of lactide

Monomeric bis(isopropoxy) titanium complexes LTi(Oⁱ Pr)₂ (L =  ─ OC₆H₂–4‐R¹–6‐R²–2‐CH₂N[(CH₂)₂N(R³)₂]CH₂–4‐R⁴–6‐R⁵‐C₆H₂O ─ , R¹ = R² = ^t Bu, R³ = Et, R⁴ = R⁵ = Cl, (L¹)Ti(Oⁱ Pr)₂; R¹ = R² = Me, R³ = Et, R⁴ = R⁵ = Me, (L²)Ti(Oⁱ Pr)₂; R¹ = R² = ^t Bu, R³ = Et, R⁴ = OMe, R⁵ = ^t Bu, (L³)Ti(Oⁱ Pr)₂; R¹ = R⁴ = OMe, R³ = Et, R² = R⁵ = ^t Bu, (L⁴)Ti(Oⁱ Pr)₂; R¹ = R² = ^t Bu, R³ = Me, R⁴ = OMe, R⁵ = ^t Bu, (L⁵)Ti(Oⁱ Pr)₂) supported by amine bis(phenolate) ligands were synthesized and characterized using NMR spectroscopy and elemental analysis. The solid‐state structure of (L³)Ti(Oⁱ Pr)₂ was determined using single‐crystal X‐ray diffraction. (L^1–5)Ti(Oⁱ Pr)₂ were all found to initiate the ring‐opening polymerization of l ‐lactide and rac ‐lactide in a controlled manner at 110–160°C. As shown by kinetic studies, (L¹)Ti(Oⁱ Pr)₂ polymerized l ‐lactide faster than did (L^2–5)Ti(Oⁱ Pr)₂. In addition, good number‐average molecular weight and narrow polydispersity index (1.00–1.71) of polymers were also obtained. The microstructure of the polymers and a possible mechanism of coordination–insertion of polymerization were evidenced by MALDI‐TOF and ¹H NMR spectra of the polylactides.     

Aerobic oxidation reactions catalyzed by vanadium complexes of bis(phenolate) ligands

Vanadium(V) complexes of the tridentate bis(phenolate)pyridine ligand H(2)BPP (H(2)BPP = 2,6-(HOC(6)H(2)-2,4-(t)Bu(2))(2)NC(5)H(3)) and the bis(phenolate)amine ligand H(2)BPA (H(2)BPA = N,N-bis(2-hydroxy-4,5-dimethylbenzyl)propylamine) have been synthesized and characterized. The ability of the complexes to mediate the oxidative C-C bond cleavage of pinacol was tested. Reaction of the complex (BPP)V(V)(O)(O(i)Pr) (4) with pinacol afforded the monomeric vanadium(IV) product (BPP)V(IV)(O)(HO(i)Pr) (6) and acetone. Vanadium(IV) complex 6 was oxidized rapidly by air at room temperature in the presence of NEt(3), yielding the vanadium(V) cis-dioxo complex [(BPP)V(V)(O)(2)]HNEt(3). Complex (BPA)V(V)(O)(O(i)Pr) (5) reacted with pinacol at room temperature, to afford acetone and the vanadium(IV) dimer [(BPA)V(IV)(O)(HO(i)Pr)](2). Complexes 4 and 5 were evaluated as catalysts for the aerobic oxidation of 4-methoxybenzyl alcohol and arylglycerol β-aryl ether lignin model compounds. Although both 4 and 5 catalyzed the aerobic oxidation of 4-methoxybenzyl alcohol, complex 4 was found to be a more active and robust catalyst for oxidation of the lignin model compounds. The catalytic activities and selectivities of the bis(phenolate) complexes are compared to previously reported catalysts.     

Diamine bis(phenolate) and pendant amine bis(phenolate) ligands: catalytic activity for the room temperature palladium‐catalyzed Suzuki–Miyaura coupling reaction

A series of amine bis(phenolate) ligands bearing aryl substituents of varying steric bulk are reported and characterized using single‐crystal X‐ray diffraction, NMR spectroscopy and high‐resolution mass spectrometry experiments. Palladium complexes derived in situ from these ligands are evaluated as catalysts for the Suzuki–Miyaura coupling of phenylboronic acid and aryl bromides. High conversions are observed for these reactions in methanol solvent at low catalyst loadings (0.01 mol%), short reaction times (30 min) and mild temperatures (30°C). Conversion is observed for a range of substrates, and is found to depend on the nature of the external base and solvent employed. These findings demonstrate the utility of catalysts derived from late transition metal complexes of amine bis(phenolate) ligands, particularly those bearing bulky cumyl substituents. Copyright © 2015 John Wiley & Sons, Ltd.     

Rhodium complexes bearing tetradentate diamine-bis(phenolate) ligands

Using tetradentate, dianionic ligands, several new rhodium complexes have been prepared. Some of these diamine-bis(phenolate) compounds, are active for C-H activation of benzene. These complexes are air and thermally stable. All four complexes were characterized by X-ray diffraction.     

Heterogenization of titanium(IV) complexes with amine bis(phenolate) ligands onto SBA‐15: exploring their catalytic epoxidation and electrochemical behaviour

This paper describes the synthesis and characterization of titanium catalysts supported onto SBA‐15 via chemical bonding. This was done by first modifying the support with amine bis(phenol) groups as functional linkers and hexamethyldisilizane as capping agent to mask the remaining silanol groups on the silica surface. Finally, titanium tetraisopropoxide was immobilized by reaction with the modified SBA‐15. All the materials were characterized using X‐ray diffraction, X‐ray fluorescence, nitrogen adsorption‐desorption, Fourier transform infrared, UV‐visible diffuse reflectance and solid‐state nuclear magnetic resonance spectroscopies, and solid‐state electrochemical techniques. The titanium materials were tested as cyclohexene epoxidation catalysts. The stability and reusability of the catalysts were also examined using voltammetry measurements. Copyright © 2016 John Wiley & Sons, Ltd.     

Dinuclear complexes with bis(benzenedithiolate) ligands

As a part of a broader study directed towards helical coordination compounds with benzenedithiolate donors, we have synthesized the bis(benzenedithiol) ligands 1,2-bis(2,3-dimercaptobenzamido)ethane (H(4)-1) and 1,2-bis(2,3-dimercaptophenyl)ethane (H(4)-2). Both ligands form dinuclear complexes with Ni(II), Ni(III) and, after air-oxidation, Co(III) ions under equilibrium conditions. Complexes (NEt(4))(4)[Ni(II)(2)(1)(2)] (11 b), (NEt(4))(2)[Ni(III)(2)(1)(2)] (13), and Na(4)[Ni(II)(2)(2)(2)] (14) were characterized by X-ray diffraction. In all complexes, two square-planar [Ni(S(2)C(6)H(3)R)(2)] units are linked in a double-stranded fashion by the carbon backbone and they assume a coplanar arrangement in a stair-like manner. Cyclic voltammetric investigations show a strong dependence of the redox potential on the type of the ligand. The substitution of 1(4-) for 2(4-) on nickel (-785 mV for 11 b versus -1130 mV for 14, relative to ferrocene) affects the redox potential to a similar degree as the substitution of nickel for cobalt (-1160 mV for [Co(2)(1)(2)](2-)/[Co(2)(1)(2)](4-), relative to ferrocene). The redox waves display a markedly less reversible behavior for complexes with the shorter bridged ligand 2(4-) compared to those of 1(4-).     

Titanium(IV) terminal hydroxo complexes containing chelating bis(phosphine oxide) ligands

Treatment of [L_OEtTi(OTf)₃] (, OTf⁻ = triflate) with S-binapO₂ (binap = 2,2′-bis(diphenylphosphinoyl)-1,1′-binaphthyl) afforded the terminal hydroxo complex [L_OEtTi(S-binapO₂)(OH)][OTf]₂ (1). Treatment of [L_OEtTi(OTf)₃] with K(tpip) (tpip⁻ = [N(Ph₂PO)₂]⁻) afforded [L_OEtTi(tpip)(OTf)][OTf] (2) that reacted with CsOH to give [L_OEtTi(tpip)(OH)][OTf] (3). The structures of 1 and 2 have been determined.     

Ring‐opening polymerization of rac‐ and meso‐lactide initiated by indium bis(phenolate) isopropoxy complexes

Ring‐opening polymerization of rac‐ and meso‐lactide initiated by indium bis(phenolate) isopropoxides {1,4‐dithiabutanediylbis(4,6‐di‐tert‐butylphenolate)}(isopropoxy)indium ( 1 ) and {1,4‐dithiabutanediylbis(4,6‐di(2‐phenyl‐2‐propyl)phenolate)}(isopropoxy)indium ( 2 ) is found to follow first‐order kinetics for monomer conversion. Activation parameters ΔH^? and ΔS^? suggest an ordered transition state. Initiators 1 and 2 polymerize meso‐lactide faster than rac‐lactide. In general, compound 2 with the more bulky cumyl ortho‐substituents in the phenolate moiety shows higher polymerization activity than 1 with tert‐butyl substituents. meso‐Lactide is polymerized to syndiotactic poly(meso‐lactides) in THF, while polymerization of rac‐lactide in THF gives atactic poly(rac‐lactides) with solvent‐dependent preferences for heterotactic (THF) or isotactic (CH₂Cl₂) sequences. Indium bis(phenolate) compound rac‐(1,2‐cyclohexanedithio‐2,2′‐bis{4,6‐di(2‐phenyl‐2‐propyl)phenolato}(isopropoxy)indium ( 3 ) polymerizes meso‐lactide to give syndiotactic poly(meso‐lactide) with narrow molecular weight distributions and rac‐lactide in THF to give heterotactically enriched poly(rac‐lactides). © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 4983–4991     

Sterically variable dizinc complexes bearing bis(iminopyridyl)phenolate ligands: synthesis, structures and reactivity studies

A series of chiral dizinc complexes of the type [(2,6-{ArN=C(Me)C5H3N}2C6H3O)Zn2(micro-Cl)Cl2] [Ar=2,6-i-Pr2C6H3 (), 2,6-Me2C6H3 (), 2,4,6-Me3-C6H2 (), 2,4-Me2C6H3 ()] can be conveniently prepared in good yield by the template reaction of 2,6-{O=C(Me)C5H3N}2C6H3OH with an excess of the corresponding aniline and two equivalents of zinc dichloride in n-BuOH at elevated temperature. Alternatively, the pro-ligands, 2,6-{(ArN=C(Me)C5H3N}2C6H3OH [Ar=2,6-i-Pr2C6H3 (L1-H), 2,6-Me2C6H3 (L2-H), 2,4,6-Me3C6H2 (L3-H), 2,4-Me2C6H3 (L4-H)], can be isolated and then treated with two equivalents of zinc dichloride to afford . Interaction of with two equivalents of NaOAc in the presence of TlBF4 gives the diacetate-bridged salt [(L1)Zn2(micro-OAc)2](BF4) () while with Nadbm (dbm=dibenzoylmethanato) the bis(dbm)-chelated salt [(L1)Zn2(dbm)2](BF4) () is obtained. Hydrolysis occurs on reaction of with TlOEt to furnish [(L1)Zn2(micro-OH)Cl2] () as the only isolable product. Conversely, reaction of with Tlhp (hp=2-pyridonate) affords the neutral bis(pyridonate)-bridged trimetallic complex [(L1)Zn3(micro-hp)2Cl3] () as the major product along with as the minor one. Complex and mixtures of / act as modest activators for the ring-opening polymerisation of epsilon-caprolactone. Single crystal X-ray diffraction studies have been performed on , , , , and reveal Zn...Zn separations in the range: 3.069(4)-4.649(6) A.     

Novel neutral octanuclear copper(I) complexes stabilized by pyridine linked bis(pyrazolate) ligands

Two novel, neutral, octanuclear copper(I) complexes displaying twisted-boat Cu(8) conformations and short Cu-Cu interactions have been synthesized from hydrothermal reactions; the complexes show unusual multiple band emissions.     

Highly heteroselective ring-opening polymerization of racemic lactide initiated by divalent ytterbium complexes bearing amino bis(phenolate) ligands

Polymerization of racemic lactide initiated by divalent ytterbium complexes supported by either dimethylamino-amino bis(phenolate) or methoxy-amino bis(phenolate) ligands proceeds rapidly at room temperature in a living fashion to give heterotactic polylactide with the racemic enchainment of monomer units P(r) ranging from 0.97-0.99.     

Polymerization of 4‐methylpentene and vinylcyclohexane by amine bis(phenolate) titanium and zirconium complexes

The polymerization of the substituted olefins 4‐methylpentene and vinylcyclohexane by dibenzyl titanium and zirconium complexes of three amine bis(phenolate) ligands is reported. The ligands featured a dimethylamino side‐arm donor and either electron‐withdrawing (Cl and Br) or methyl phenolate substituents. After activation with B(C₆F₅)₃, the zirconium catalysts exhibited a higher activity than the titanium catalysts toward these bulky olefins. Very high weight‐average molecular weight poly(4‐methylpentene) was obtained with the zirconium catalysts. The zirconium catalysts were employed in 1‐hexene polymerization, and their activity was found to be the highest ever reported for catalysts of the amine bis(phenolate) family. The catalysts featuring methyl phenolate substituents showed a higher activity toward these substituted olefins than the electron‐poor catalysts; this trend was opposite to their activity toward 1‐hexene. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1136–1146, 2006     

Amine‐bis(phenolate) Iron(III)‐Catalyzed Formal Hydroamination of Olefins

A practical synthesis of highly functionalized amines by the formal hydroamination reaction of alkenes with nitroarenes catalyzed by an air stable amine‐bis(phenolate) iron(III) complex is reported. The reaction uses an easily handled silane, low catalyst loadings, and mild reaction conditions. A wide range of substrates are transformed with synthetically useful yields (21 examples).     

Synthesis, characterization, and lactide polymerization activity of group 4 metal complexes containing two bis(phenolate) ligands

A series of group 4 metal complexes Zr-(1)(2), Zr-(2)(2), Zr-(3)(2), Zr-(4)(2), Zr-(5)(2), Hf-(1)(2), and Hf-(4)(2) containing two bridged bis(phenolate) ligands of the (OSSO)-type were prepared by the reaction of the corresponding bis(phenol) and group 4 metal precursor MX(4) (X = O(i)Pr, CH(2)Ph) and isolated as robust, colorless crystals. NMR spectra indicate D(2) symmetry, in agreement with the solid state structure determined by single crystal X-ray diffraction study of the complexes Zr-(1)(2), Hf-(1)(2), Zr-(3)(2), Zr-(4)(2), and Zr-(5)(2). The complexes with the 1,4-dithiabutanediyl bridged ligands exhibit a highly symmetric coordination around the metal center. The introduction of the rigid trans-1,2-cyclohexanediyl bridged ligands led to a distorted coordination around the metal center in Zr-(4)(2) and Zr-(5)(2) when the ortho substituent is tert-butyl and the para substituent is larger than methyl. The complexes Zr-(1)(2), Zr-(2)(2), Zr-(3)(2), Zr-(4)(2) as well as Hf-(1)(2) and Hf-(4)(2) initiated the ring-opening polymerization of meso-lactide at 100 °C to give heterotactic polylactide with pronounced heterotacticity (>70%) and varying polydispersity (1.05 < M(w)/M(n) < 1.61). As shown by kinetic studies, zirconium complex Zr-(1)(2) polymerized meso-lactide faster than the homologous hafnium complex Hf-(1)(2).     

Synthetic and structural investigations of alkali metal diamine bis(phenolate) complexes

Two lithium and one sodium diamine bis(phenolate) complexes have been prepared and characterised by X-ray crystallography and NMR spectroscopy. Two parent diamine bis(phenol) ligands were utilised in the study (1-H2 and 2-H2). Dimeric (1-Li2)(2) was prepared by treating 1-H2 with two molar equivalents of n-butyllithium in hydrocarbon solvent. It adopts a ladder-like structure in the solid state, which appears to deaggregate in C6D6 solution. The monomeric (hence, dinuclear) TMEDA-solvated species [2-Li(2).(TMEDA)] has two chemically unique Li atoms in the solid state and is prepared by reacting 2-H2 with two molar equivalents of n-butyllithium in hydrocarbon solvent, in the presence of N,N,N',N'-tetramethylethylenediamine (TMEDA). Finally, the dimeric sodium-based [2-Na(2) x (OEt2](2) was prepared by reacting 1-H2 with two molar equivalents of freshly prepared n-butylsodium in a hydrocarbon-diethyl ether medium. The complex adopts a Na4O4) cuboidal structure in the solid state, which appears to remain intact in C6D6 solution.     

Novel iron(III) complexes of tripodal and linear tetradentate bis(phenolate) ligands: close relevance to intradiol-cleaving catechol dioxygenases

Four new iron(III) complexes of the bis(phenolate) ligands N,N-dimethyl-N',N'-bis(2-hydroxy-3,5-dimethylbenzyl)ethylenediamine [H2(L1)], N,N-dimethyl-N',N'-bis(2-hydroxy-4-nitrobenzyl)ethylenediamine [H2(L2)], N,N'-dimethyl-N,N'-bis(2-hydroxy-3,5-dimethylbenzyl)ethylenediamine [H2(L3)], and N,N'-dimethyl-N,N'-bis(2-hydroxy-4-nitrobenzyl)ethylenediamine [H2(L4)] have been isolated and studied as structural and functional models for the intradiol-cleaving catechol 1,2-dioxygenases (CTD). The complexes [Fe(L1)Cl] (1), [Fe(L2)(H2O)Cl] (2), [Fe(L3)Cl] (3), and [Fe(L4)(H2O)Cl] (4) have been characterized using absorption spectral and electrochemical techniques. The single-crystal X-ray structures of the ligand H2(L1) and the complexes 1 and 2 have been successfully determined. The tripodal ligand H2(L1) containing a N2O2 donor set represents the metal-binding region of the iron proteins. Complex 1 contains an FeN2O2Cl chromophore with a novel trigonal bipyramidal coordination geometry. While two phenolate oxygens and an amine nitrogen constitute the trigonal plane, the other amine nitrogen and chloride ion are located in the axial positions. In contrast, 2 exhibits a rhombically distorted octahedral coordination geometry for the FeN2O3Cl chromophore. Two phenolate oxygen atoms, an amine nitrogen atom, and a water molecule are located on the corners of a square plane with the axial positions being occupied by the other nitrogen atom and chloride ion. The interaction of the complexes with a few monodentate bases and phenolates and differently substituted catechols have been investigated using absorption spectral and electrochemical methods. The effect of substituents on the phenolate rings on the electronic spectral features and FeIII/FeII redox potentials of the complexes are discussed. The interaction of the complexes with catecholate anions reveals changes in the phenolate to iron(III) charge-transfer band and also the appearance of a low-energy catecholate to iron(III) charge-transfer band similar to catechol dioxygenase-substrate complexes. The redox behavior of the 1:1 adducts of the complexes with 3,5-di-tert-butylcatechol (H2DBC) has been also studied. The reactivities of the present complexes with H2DBC have been studied and illustrated. Interestingly, only 2 and 4 catalyze the intradiol-cleavage of H2DBC, the rate of oxygenation being much faster for 4. Also 2, but not 4, yields an extradiol cleavage product. The reactivity of the complexes could be illustrated not on the basis of the Lewis acidity of the complexes alone but by assuming that the product release is the rate-determining phase of the catalytic reaction.     

Binuclear dichlorido(η6‐p‐cymene)ruthenium(II) complexes with bis(nicotinate)‐ and bis(isonicotinate)‐polyethylene glycol ester ligands

Neutral binuclear ruthenium complexes 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 of the general formula [{RuCl₂(η⁶‐p‐cym)}₂ μ‐(N^∩N)] (N^∩N = bis(nicotinate)‐ and bis(isonicotinate)‐polyethylene glycol esters: (3‐py)COO(CH₂CH₂O)_nCO(3‐py) and (4‐py)COO(CH₂CH₂O)_nCO(4‐py), n =1–4), as well as mononuclear [RuCl₂(η⁶‐p‐cym)((3‐py)COO(CH₂CH₂OCH₃)‐κN)], complex 9 , were synthesized and characterized using elemental analysis and electrospray ionization high‐resolution mass spectrometry, infrared, ¹H NMR and ¹³C NMR spectroscopies. Stability of the binuclear complexes in the presence of dimethylsulfoxide was studied. Furthermore, formation of a cationic complex containing bridging pyridine‐based bidentate ligand was monitored using ¹H NMR spectroscopy. Ligand precursors, polyethylene glycol esters of nicotinic ( L1 · 2HCl– L4 · 2HCl and L9 · HCl) and isonicotinic acid dihydrochlorides ( L5 · 2HCl– L8 · 2HCl), binuclear ruthenium(II) complexes 1 , 2 , 3 , 4 , 5 , 6 , 7 , 8 and mononuclear complex 9 were tested for in vitro cytotoxicity against 518A2 (melanoma), 8505C (anaplastic thyroid cancer), A253 (head and neck tumour), MCF‐7 (breast tumour) and SW480 (colon carcinoma) cell lines. Copyright © 2014 John Wiley & Sons, Ltd.     

Random copolymerization of l‐lactide and ε‐caprolactone by aluminum alkoxide complexes supported by N2O2 bis(phenolate)‐amine ligands

The bowl‐shaped aluminum alkoxide complexes bearing N₂O₂ bis(phenolate)‐amine ligands having different side arms as pyridine ( 1 ), dimethyl amine ( 2 ), and diethyl amine ( 3 ) were shown to be highly efficient and well behaved in the homopolymerization and copolymerization of l ‐lactide (LA) and ε‐caprolactone (ε‐CL) at 100 °C. The rates of copolymerization are similar for Complexes 1 – 3 where nearly full conversions were achieved in 60 h for [LA]:[CL]:[Al] ratio of 50:50:1. The minor adjustment of the side arms of the Catalysts 1 – 3 gave profound differences in the LA/ε‐CL copolymer sequences where tapered, gradient, and highly random structures were obtained in one system, respectively. The chelation of LA to Al metal after ring‐opening process and suitable steric hindrance of the side arms were believed to participate and saturate the aluminum metal centers giving different copolymer structures. The random LA/ε‐CL copolymer structure was confirmed by nuclear magnetic resonance and differential scanning calorimetry analysis. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1635–1644     

Zirconium complexes bearing bis(phenoxy‐imine) ligands with bulky o‐bis(aryl)methyl‐substituted aniline groups: synthesis,characterization and ethylene polymerization behavior

A series of bis(phenoxy‐imine) zirconium complexes bearing bulky o‐bis(aryl)methyl‐substituted aryl groups on the aniline moiety have been synthesized, characterized and tested as catalyst precursors for ethylene polymerization. ¹H NMR spectroscopy suggests that these complexes exist as a single chiral C₂‐symmetric isomer in the solution. X‐ray crystallographic analysis of the resulting biszwitterionic‐type adduct complex C1 · 2HCl reveals that the phenoxy‐imine groups function as a monodentate phenoxy ligand and the oxygen atoms are oriented trans to each other at the central metal atom. Using modified methylaluminoxane (MMAO) as co‐catalyst, C1 · 2HCl, C2–C6 exclusively produce linear aluminium‐terminated polyethylenes (Al‐PEs) with high activity (up to 16.89 × 10⁶ g PE (mol Zr h)^?1, suggesting that chain transfer to aluminum is the predominant termination mechanism. It is noteworthy that the introduction of an excessively bulky o‐bis(aryl)methyl substituent adjacent to the imine‐N produces low molecular‐weight Al‐PEs (M_v 1.6–10.1 × 10³) due to the enhanced rate of chain transfer to alkylaluminium groups during polymerization. Copyright © 2013 John Wiley & Sons, Ltd.