Synthesis of high‐molecular‐weight aliphatic–aromatic copolyesters from poly(ethylene‐co‐1,6‐hexene terephthalate) and poly(L‐lactic acid) by chain extension

A series of aliphatic–aromatic multiblock copolyesters consisting of poly(ethylene‐co‐1,6‐hexene terephthalate) (PEHT) and poly(L ‐lactic acid) (PLLA) were synthesized successfully by chain‐extension reaction of dihydroxyl terminated PEHT‐OH prepolymer and dihydroxyl terminated PLLA‐OH prepolymer using toluene‐2,4‐diisoyanate as a chain extender. PEHT‐OH prepolymers were prepared by two step reactions using dimethyl terephthalate, ethylene glycol, and 1,6‐hexanediol as raw materials. PLLA‐OH prepolymers were prepared by direct polycondensation of L ‐lactic acid in the presence of 1,4‐butanediol. The chemical structures, the molecular weights and the thermal properties of PEHT‐OH, PLLA‐OH prepolymers, and PEHT‐PLLA copolymers were characterized by FTIR, ¹H NMR, GPC, TG, and DSC. This synthetic method has been proved to be very efficient for the synthesis of high‐molecular‐weight copolyesters (say, higher than M_w = 3 × 10⁵ g/mol). Only one glass transition temperature was found in the DSC curves of PEHT‐PLLA copolymers, indicating that the PLLA and PEHT segments had good miscibility. TG curves showed that all the copolyesters had good thermal stabilities. The resulting novel aromatic–aliphatic copolyesters are expected to find a potential application in the area of biodegradable polymer materials. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5898–5907, 2009     

Polyesters containing sulfur. VIII. New benzophenone‐derivative thiopolyesterdiols synthesis and characterization. Their use for thermoplastic polyurethanes preparation

The new linear thiopolyesterdiols (PEs) containing sulfur in the main chain were synthesized by melt polycondensation of newly obtained benzophenone‐4,4′‐bis(methylthioacetic acid) with excess of 1,4‐butanediol, 1,5‐pentanediol, and 1,6‐hexanediol. All these PEs (M _n of 2000–2600) were converted to thiopoly(ester‐urethane)s (PEUs) by polyaddition reaction with hexamethylene diisocyanate or 4,4′‐diphenylmethane diisocyanate, which was carried out in melt at the ratio of NCO/OH = 1. The resulting thermoplastic PEUs were amorphous and elastomeric, with elongation at break ranging from 630 to 1200%. The polymers were characterized by Fourier transform infrared, ¹H NMR, thermogravimetric analysis, differential scanning calorimetry, and in the case of PEUs, Shore A/D hardness and tensile properties. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3977–3983, 2000     

A non‐phosgene process to homopolycarbonate and copolycarbonates of isosorbide using dimethyl carbonate: Synthesis,characterization, and properties

Poly(isosorbide carbonate) (PIC) was synthesized by melt polycondensation of dimethyl carbonate (DMC) and isosorbide using lithium acetylacetonate (LiAcac) as the catalyst. The reaction conditions were optimized to achieve PIC with relatively high number‐average molecular weight (M_n) of 28,800 g/mol and isosorbide conversion of 95.2%. A series of poly(aliphatic diol‐co‐isosorbide carbonate)s (PAICs) were also synthesized by melt polycondensation of DMC with isosorbide and equimolar amounts of aliphatic diols (1,4‐butanediol, 1,5‐pentanediol, 1,6‐hexanediol, and 1,4‐cyclohexane dimethanol) in the presence of LiAcac and the TiO₂/SiO₂‐based catalyst (TSP‐44). PAICs with M_n values ranging from 18,700 to 34,400 g/mol and polydispersities between 1.64 and 1.69 were obtained. The ¹³C NMR analysis revealed the random microstructure of PAICs. The differential scanning calorimetry results demonstrated that all the PAICs were amorphous with a unique T_g ranging from 46 to 88 °C. The dynamic analysis results showed that the incorporation of linear or cyclohexane structure changed the dynamic mechanical properties of PIC drastically. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Correlation of the solid‐state reactivities of racemic 2,4(6)‐di‐O‐benzoyl‐myo‐inositol 1,3,5‐orthoformate and its 4,4′‐bipyridine cocrystal with their crystal structures

Racemic 2,4(6)‐di‐O‐benzoyl‐myo‐inositol 1,3,5‐orthoformate, C₂₁H₁₈O₈, (1) , shows a very efficient intermolecular benzoyl‐group migration reaction in its crystals. However, the presence of 4,4′‐bipyridine molecules in its cocrystal, C₂₁H₁₈O₈·C₁₀H₈N₂, (1)·BP , inhibits the intermolecular benzoyl‐group transfer reaction. In (1) , molecules are assembled around the crystallographic twofold screw axis (b axis) to form a helical self‐assembly through conventional O—H...O hydrogen‐bonding interactions. This helical association places the reactive C6‐O‐benzoyl group (electrophile, El) and the C4‐hydroxy group (nucleophile, Nu) in proximity, with a preorganized El...Nu geometry favourable for the acyl transfer reaction. In the cocrystal (1)·BP , the dibenzoate and bipyridine molecules are arranged alternately through O—H...N interactions. The presence of the bipyridine molecules perturbs the regular helical assembly of the dibenzoate molecules and thus restricts the solid‐state reactivity. Hence, unlike the parent dibenzoate crystals, the cocrystals do not exhibit benzoyl‐transfer reactions. This approach is useful for increasing the stability of small molecules in the crystalline state and could find application in the design of functional solids.     

Six two‐ and three‐component ammonium carboxylate salt structures with a ladder‐type hydrogen‐bonding motif,three incorporating neutral carboxylic acid molecules

Six ammonium carboxylate salts are synthesized and reported, namely 2‐propylammonium benzoate, C₃H₁₀N⁺·C₇H₅O₂⁻, (I), benzylammonium (R)‐2‐phenylpropionate, C₆H₁₀N⁺·C₉H₉O₂⁻, (II), (RS)‐1‐phenylethylammonium naphthalene‐1‐carboxylate, C₈H₁₂N⁺·C₁₁H₇O₂⁻, (III), benzylammonium–benzoate–benzoic acid (1/1/1), C₆H₁₀N⁺·C₇H₅O₂⁻·C₇H₆O₂, (IV), cyclopropylammonium–benzoate–benzoic acid (1/1/1), C₃H₈N⁺·C₇H₅O₂⁻·C₇H₆O₂, (V), and cyclopropylammonium–ea‐cis‐cyclohexane‐1,4‐dicarboxylate–ee‐trans‐cyclohexane‐1,4‐dicarboxylic acid (2/1/1), 2C₃H₈N⁺·C₈H₁₀O₄²⁻·C₈H₁₂O₄, (VI). Salts (I)–(III) all have a 1:1 ratio of cation to anion and feature three N⁺—H...O⁻ hydrogen bonds which form one‐dimensional hydrogen‐bonded ladders. Salts (I) and (II) have type II ladders, consisting of repeating R₄³(10) rings, while (III) has type III ladders, in this case consisting of alternating R₄²(8) and R₄⁴(12) rings. Salts (IV) and (V) have a 1:1:1 ratio of cation to anion to benzoic acid. They have type III ladders formed by three N⁺—H...O⁻ hydrogen bonds, while the benzoic acid molecules are pendant to the ladders and hydrogen bond to them via O—H...O⁻ hydrogen bonds. Salt (VI) has a 2:1:1 ratio of cation to anion to acid and does not feature any hydrogen‐bonded ladders; instead, the ionized and un‐ionized components form a three‐dimensional network of hydrogen‐bonded rings. The two‐component 1:1 salts are formed from a 1:1 ratio of amine to acid. To create the three‐component salts (IV)–(VI), the ratio of amine to acid was reduced so as to deprotonate only half of the acid molecules, and then to observe how the un‐ionized acid molecules are incorporated into the ladder motif. For (IV) and (V), the ratio of amine to acid was reduced to 1:2, while for (VI) the ratio of amine to acid required to deprotonate only half the diacid molecules was 1:1.     

Carbohydrate‐based copolyesters made from bicyclic acetalized galactaric acid

Mixtures of the dimethyl esters of adipic acid and 2,3:4,5‐di‐O‐methylene‐galactaric acid (Galx) were made to react in the melt with either 1,6‐hexanediol or 1,12‐dodecanediol to produce linear polycyclic copolyesters with aldarate unit contents varying from 10 up to 90 mole %. The copolyesters had weight–average molecular weights in the ～35,000–45,000 g mol^?1 range and a random microstructure, and were thermally stable up to nearly 300 °C. They displayed T_g in the ‐50 to ‐7 °C range with values largely increasing with the content in galactarate units. All the copolyesters were semicrystalline with T_m between 20 and 90 °C but only those made from 1,12‐dodecanediol were able to crystallize from the melt at a crystallization rate that decreased as the contents in the two comonomers approached each other. Copolyesters containing minor amounts of galactarate units adopted the crystal structure characteristic of aliphatic polyesters but a new crystal polymorph was formed when the cyclic sugar units became the majority. Stress–strain parameters were sensitively affected by composition of the copolyesters with the mechanical behavior changing from flexible/ductile to stiff/brittle with the replacement of adipate units by the galactarate units. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Three polymorphs of an inclusion compound of 2,2′‐(disulfanediyl)dibenzoic acid and trimethylamine

Polymorphism is the ability of a solid material to exist in more than one form or crystal structure and this is of interest in the fields of crystal engineering and solid‐state chemistry. 2,2′‐(Disulfanediyl)dibenzoic acid (also called 2,2′‐dithiosalicylic acid, DTSA) is able to form different hydrogen bonds using its carboxyl groups. The central bridging S atoms allow the two terminal arene rings to rotate freely to generate various hydrogen‐bonded linking modes. DTSA can act as a potential host molecule with suitable guest molecules to develop new inclusion compounds. We report here the crystal structures of three new polymorphs of the inclusion compound of DTSA and trimethylamine, namely trimethylazanium 2‐[(2‐carboxyphenyl)disulfanyl]benzoate 2,2′‐(disulfanediyl)dibenzoic acid monosolvate, C₃H₁₀N⁺·C₁₄H₉O₄S₂⁻·C₁₄H₁₀O₄S₂, (1), tetrakis(trimethylazanium) bis{2‐[(2‐carboxyphenyl)disulfanyl]benzoate} 2,2′‐(disulfanediyl)dibenzoate 2,2′‐(disulfanediyl)dibenzoic acid monosolvate, 4C₃H₁₀N⁺·2C₁₄H₉O₄S₂⁻·C₁₄H₈O₄S₂²⁻·C₁₄H₁₀O₄S₂, (2), and trimethylazanium 2‐[(2‐carboxyphenyl)disulfanyl]benzoate, C₃H₁₀N⁺·C₁₄H₉O₄S₂⁻, (3). In the three polymorphs, DTSA utilizes its carboxyl groups to form conventional O—H…O hydrogen bonds to generate different host lattices. The central N atoms of the guest amine molecules accept H atoms from DTSA molecules to give the corresponding cations, which act as counter‐ions to produce the stable crystal structures via N—H…O hydrogen bonding between the host acid and the guest molecule. It is noticeable that although these three compounds are composed of the same components, the final crystal structures are totally different due to the various configurations of the host acid, the number of guest molecules and the inducer (i.e. ancillary experimental acid).     

RhI‐Catalyzed Cyclizative Addition Reaction of 1,6‐Enyne and Sulfonyl Chloride by Carbophilic Activation

The π‐acid‐catalyzed cyclizations of 1,n‐enynes by carbophilic activation have been extensively studied and appear as highly attractive processes, yet the cases within a catalytic cycle based on redox principle are rare. Herein, we report the cyclizative addition reactions of 1,6‐enynes and sulfonyl chlorides by using a [Rh(cod)Cl/dppf] (dppf=1,1′‐bis(diphenylphosphino)ferrocene) catalyst system. The process features the involvement of oxidative addition of sulfonyl chloride to Rh^I catalyst, which generates [(dppf)(RSO₂)RhCl₂] as a π‐acid species to trigger cyclizative addition in a 6‐endo‐dig manner by carbophilic activation. Moreover, the catalytic protocol is also applicable to 1,6‐diene analogues.     

Synthesis and Thermal Properties of Biodegradable Poly(ester‐urethane)s Based on Chemo‐Synthetic Poly[(R,S)‐3‐hydroxybutyrate]

A series of telechelic oligo[(R,S)‐3‐hydroxybutyrate]‐diols (PHB‐diols) was synthesized from ethyl (R,S)‐3‐hydroxybutyrate (ethyl (HB)) and four different aliphatic diols, namely, 1,4‐butanediol, 1,6‐hexanediol, 1,8‐octanediol and 1,10‐decanediol by transesterification and condensation in bulk. The structures of the synthesized oligomers were confirmed by ¹H NMR spectroscopy and MALDI‐TOF mass spectroscopy. The use of 1,4‐butanediol results in an oligoester with hydroxyl functionality of approximately 2. In the case of the higher aliphatic diols, the number average functionalities were found to be lower than 2. These differences were ascribed to side reactions which occur during polymerization, yielding unreactive end groups. Other novel families of biodegradable poly(ester‐urethane)s were synthesized either from PHB‐diol alone, or PHB‐diol mixed with poly(ε‐caprolactone)‐diol (PCL‐diol), poly(butylene adipate)‐diol (PBA‐diol) or poly(diethylene glycol adipate)‐diol (PDEGA‐diol). In each case, 1,6‐hexamethylene diisocyanate was used as a nontoxic connecting agent. The homopolymers prepared from PCL‐diol, PBA‐diol and PDEGA‐diol were also synthesized for the sake of comparison. All the prepared copolymers possess high molecular weight with glass transition temperature (T_g) values varying from –54 to –23°C. Some of the prepared copoly(ester‐urethane)s are partially crystalline with melting temperatures (T_m's) varying from 37 to 56°C.     

Studies on the biodegradation of fosfomycin: synthesis of 13C-labeled intermediates, feeding experiments with Rhizobium huakuii PMY1, and isolation of labeled amino acids from cell mass by HPLC

Racemic (1R*,2R*)‐1,2‐dihydroxy‐[1‐¹³C₁]propylphosphonic acid and 1‐hydroxy‐[1‐¹³C₁]acetone were synthesized and fed to R. huakuii PMY1. Alanine and a mixture of valine and methionine were isolated as their N‐acetyl derivatives from the cell hydrolysate by reversed‐phase HPLC and analyzed by NMR spectroscopy. It was found that the carbon atoms of the respective carboxyl groups were highly ¹³C‐labeled (up to 65 %). Hydroxyacetone is therefore considered an obligatory intermediate of the biodegradation of fosfomycin by R. huakuii PMY1.     

Synthesis and properties of biodegradable copolymers based on 4,4′‐(adipoyldioxy)dicinnamic acid, 1,6‐hexanediol,and poly(ethylene glycol)s

4,4′‐(Adipoyldioxy)dicinnamic acid (CAC) was synthesized by a condensation of adipoyl chloride and 4‐hydroxycinnamic acid. The CAC6 copolymers were prepared by a high‐temperature solution polycondensation of a diacyl chloride of CAC, 1,6‐hexanediol (6), and poly(ethylene glycol) (PEG) in which the molecular weights of PEG are 1000, 2000, and 8300. Differential scanning calorimetric curves of the copolymers exhibited a glass‐transition temperature because of PEG moiety and two melting endotherms (T_m's); the one at the higher T_m was due to CAC6 moiety, and the other at the lower T_m was due to PEG moiety, suggesting that these copolymers are the block type. The incorporation of the PEG component decreased the tensile strength and initial modulus, but increased the elongation extremely. The enzymatic degradation was performed in phosphate buffer solution (pH 7.2) with Ps. cepacia lipase at 37 °C. The degradation rate of the copolymers increased significantly with an increasing content of PEG, which was correlated to the water absorption of the copolymers. All copolymers could undergo photocuring by ultraviolet (UV) light irradiation (λ > 280 nm) at ambient temperature, as examined by UV spectroscopy and solubility. The CAC6/E2000(50/50) film photocured for 3 min exhibited a good elastic property with a maximum tensile strength of 3.7 MPa and maximum elongation of 640%. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2930–2938, 2003     

Detection of Radical Adducts with Small Molecular Weights by Matrix-Assisted Laser Desorption/Ionization with Fourier Transform Mass Spectrometry

As an alternative method, matrix-assisted laser desorption/ionization with Fourier transform mass spectrometry （MALDI-FTMS） has been successfully used to detect and identify free radical adducts with small molecular weights of hydroxyl and 2-cyano-2-propyl radicals trapped with 5,5-dimethylpyrroline N-oxide （DMPO）. The detection and identification by MS/MS experiments using sustained offresonance irradiation collision-induced dissociation （SORI-CID） of [（DMPO＋·OH-·H）＋H^＋] （m/z 130.0868） and [DMPO＋2 ·CH（CH3）2CN＋H^＋] （m/z 250.1917） have demonstrated that MALDI-FTMS could be an effective method for detection and identification of free radical adducts. Other radical adducts have been also detected and identified. The approach of MALDI-FTMS is simple, fast, and sensitive which has potential for high-throughput analysis.     

Characterization of the complex formation of 1,6‐anhydro‐β‐maltotriose with potassium using 1H and 39K NMR spectroscopy

The ¹H and ³⁹K longitudinal relaxation times (T₁) and ¹H diffusion coefficients were measured to investigate the complex formation of 1,6‐anhydro‐β‐maltotriose and potassium ions. Although the ¹H‐T₁ values of H3′, H5′, H1″ and H4″ decreased in the presence of potassium ions, ¹H chemical shifts and ¹H diffusion coefficients did not show significant changes. The long‐range coupling constants of ³J_C?H around the glycosyl bonds did not show significant changes either. In the measurements of ³⁹K spectra, the ³⁹K signal obviously broadened and the ³⁹K‐T₁ values decreased in the presence of 1,6‐anhydro‐β‐maltotriose, indicating the complex formation of 1,6‐anhydro‐β‐maltotriose and potassium ions. These results indicate that the conformation and molecular volume were unaffected in the complex formation. Copyright © 2009 John Wiley & Sons, Ltd.     

A new copper(II) supramolecular coordination polymer and a dinuclear compound with multifunctional 2‐amino‐5‐sulfobenzoic acid and flexible N‐donor ligands: synthesis,structure and characterization

Multifunctional 2‐amino‐5‐sulfobenzoic acid (H₂afsb) can exhibit a variety of roles during the construction of supramolecular coordination polymers. The pendant carboxylic acid, sulfonic acid and amino groups could not only play a role in directing bonding but could also have the potential to act as hydrogen‐bond donors and acceptors, resulting in extended high‐dimensional supramolecular networks. Two new Cu^II coordination compounds, namely catena‐poly[[[diaquacopper(II)]‐μ‐1,6‐bis(1H‐1,2,4‐triazol‐1‐yl)hexane‐κ²N⁴:N^4′] bis(3‐amino‐4‐carboxybenzenesulfonate) dihydrate], {[Cu(C₁₀H₁₆N₆)₂(H₂O)₂](C₇H₆NO₅S)₂·2H₂O}_n or {[Cu(bth)₂(H₂O)₂](Hafsb)₂·2H₂O}_n, (1), and bis(μ‐2‐amino‐5‐sulfonatobenzoato‐κ²O¹:O^1′)bis{μ‐1,2‐bis[(1H‐imidazol‐1‐yl)methyl]benzene‐κ²N³:N^3′}bis[aquacopper(II)] trihydrate, [Cu₂(C₇H₅NO₅S)₂(C₁₄H₁₄N₄)₂(H₂O)₂]·3H₂O or [Cu₂(afsb)₂(obix)₂(H₂O)₂]·3H₂O, (2), have been obtained through the assembly between H₂afsb and the Cu^II ion in the presence of the flexible N‐donor ligands 1,6‐bis(1H‐1,2,4‐triazol‐1‐yl)hexane (bth) and 1,2‐bis[(1H‐1,2,4‐triazol‐1‐yl)methyl]benzene (obix), respectively. Compound (1) consists of a cationic coordination polymeric chain and 3‐amino‐4‐carboxybenzenesulfonate (Hafsb⁻) anions. Compound (2) exhibits an asymmetric dinuclear structure. There are hydrogen‐bonded networks within the lattices of (1) and (2). Interestingly, both (1) and (2) exhibit reversible dehydration–rehydration behaviour.     

Preparation of macrodiols and polyols by chopping high‐molecular‐weight aliphatic polycarbonates

High‐molecular‐weight poly(1,4‐butylene carbonate) (PBC) (M_n: 40,000?90,000) was prepared through the condensation polymerization of dimethyl carbonate (DMC) and 1,4‐butanediol (BD) in the presence of 0.05 mol % sodium alkoxide catalyst. The subsequent feeding of 15 mol % HOAOH, such as 1,6‐hexanediol, 1,5‐pentanediol, 1,4‐cyclohexanedimethanol, or 1,4‐benzenedimethanol and stirring at 190–150 °C converted the extremely thick high‐molecular‐weight polymer to low‐molecular‐weight macrodiols with GPC‐measured M_n ～2000. The analysis of the ¹H NMR spectra indicated that the –A– units and 1,4‐butylene units were randomly distributed in the resulting oligomers. The chopping of the high‐molecular‐weight PBC using either triols or tetraols such as glycerol propoxylate, 1,1,1‐tris(hydroxymethyl)ethane, or pentaerythritol also afforded macropolyols containing branched chains with GPC‐measured M_n ～2000. When the chopped polymers were genuine PBCs, the resulting macrodiols or polyols were in a waxy state at room temperature. However, permanently oily compounds were obtained when the chopped polymers were prepared using 0.90 mole fraction of BD admixed with various other diols. The macrodiols and polyols synthesized in this study may have potential applications in the polyurethane industry. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1570–1580     

外围含对-硝基偶氮苯介晶基团的椭球型硅碳烷树状物

Novel carbosilane liquid crystalline dendrimers based on 1,6-hexanediol were prepared. Using the precursors Gn-C1 （n = 1-3） with Si-C1 bonds on the periphery as dendritic scaffolds and 4-[4-（6-hydroxyhexyloxy）phenylazo]- nitrobenzene as mesogenic group, a series of carbosilane liquid crystalline dendrimers from the first to the third generation were synthesized. These carbosilane liquid crystalline dendrimers showed smectic phase.     

Synthesis of a new 2‐amino‐glycan,poly‐(1→6)‐α‐D‐mannosamine,by ring‐opening polymerization of 1,6‐anhydro‐mannosamine derivatives

A stereoregular 2‐amino‐glycan composed of a mannosamine residue was prepared by ring‐opening polymerization of anhydro sugars. Two different monomers, 1,6‐anhydro‐2‐azido‐mannose derivative ( 3 ) and 1,6‐anhydro‐2‐(N, N‐dibenzylamino)‐mannose derivative ( 6 ), were synthesized and polymerized. Although 3 gave merely oligomers, 6 was promptly polymerized into high polymers of the number‐average molecular weight (M_n) of 2.3 × 10⁴ to 2.9 × 10⁴ with 1,6‐α stereoregularity. The differences of polymerizability of 3 and 6 from those of the corresponding glucose homologs were discussed. It was found that an N‐benzyl group is exceedingly suitable for protecting an amino group in the polymerization of anhydro sugars of a mannosamine type. The simultaneous removal of O‐ and N‐benzyl groups of the resulting polymers was achieved by using sodium in liquid ammonia to produce the first 2‐amino‐glycan, poly‐(1→6)‐α‐D ‐mannosamine, having high molecular weight through ring‐opening polymerization of anhydro sugars.© 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Application of a bio‐based polyester plasticizer modified by hydrosilicon‐hydrogenation reaction in soft PVC films

A kind of bio‐based plasticizer, poly (hexanediol maleic) (MH), was synthesized using 1,6‐hexalene and maleic acid as raw materials, and it was modified by hydrosilicon‐hydrogenation reaction to improve its plasticizing efficiency. The chemical structure and plasticizing performance of MH and its modification product (MHA) were characterized by Fourier‐transform infrared spectroscopy (FTIR), proton nuclear magnetic resonance (¹H‐NMR), X‐ray photoelectron spectroscopy (XPS), and Dynamic mechanical analysis (DMA). It was found that the hydrosilicon‐hydrogenation modification effectively improved the plasticizing efficiency of MH, reflecting on the decreased T_g and the increased elongation at break of PVC blends. The migration resistance of PVC blends was tested and analyzed by solubility parameters, which revealed that the migration stabilities of PVC blends were promoted after modification. It was verified that the hydrogen bonding interaction between the C?O group of plasticizers and α‐hydrogen of PVC exhibited in FTIR analysis was the main reason for the improvement of plasticizer performance of MH. Moreover, a new hydrogen bonding formed between Si? O? Si of MHA and the α‐hydrogen of PVC derived from XPS also caused the further improvement of plasticity for MHA.     

Two‐component molecular crystals from N‐heteroaromatics and nitro­benzoic acids

Five two‐component molecular crystals, benzimidazolium 3‐nitro­benzoate, C₇H₇N₂⁺·C₇H₄NO₄^?, (I), benzimidazolium 4‐nitro­benzoate, C₇H₇N₂⁺·C₇H₄NO₄^?, (II), 1H‐benzotriazole–3‐nitro­benzoic acid (1/1), C₆H₅N₃·C₇H₅NO₄, (III), imidazol­ium 3‐nitro­benzoate, C₃H₅N₂⁺·C₇H₄NO₄^?, (IV), and imid­azolium 4‐nitro­benzoate, C₃H₅N₂⁺·C₇H₄NO₄^?, (V), were prepared with the aim of making chiral crystals. Only (I) crystallizes in a chiral space group. The mol­ecules of (I) and (II) are linked by hydrogen bonds to form 2₁ spiral chains. In (III), (IV) and (V), macrocyclic structures are formed from two acid and two base components, by an alternate arrangement of the acid and base moieties.     

Acid‐, Water‐ and High‐Temperature‐Stable Ruthenium Complexes for the Total Catalytic Deoxygenation of Glycerol to Propane

The ruthenium aqua complexes [Ru(H₂O)₂(bipy)₂](OTf)₂, [cis‐Ru(6,6′‐Cl₂‐bipy)₂(OH₂)₂](OTf)₂, [Ru(H₂O)₂(phen)₂](OTf)₂, [Ru(H₂O)₃(2,2′:6′,2′′‐terpy)](OTf)₂ and [Ru(H₂O)₃(Phterpy)](OTf)₂ (bipy=2,2′‐bipyridine; OTf^?=triflate; phen=phenanthroline; terpy= terpyridine; Phterpy=4′‐phenyl‐2,2′:6′,2′′‐terpyridine) are water‐ and acid‐stable catalysts for the hydrogenation of aldehydes and ketones in sulfolane solution. In the presence of HOS(O)₂CF₃ (triflic acid) as a dehydration co‐catalyst they directly convert 1,2‐hexanediol to n‐hexanol and hexane. The terpyridine complexes are stable and active as catalysts at temperatures ≥250 °C and in either aqueous sulfolane solution or pure water convert glycerol into n‐propanol and ultimately propane as the final reaction product in up to quantitative yield. For the terpy complexes the active catalyst is postulated to be a carbonyl species [(4′‐R‐2,2′:6′,2′′‐terpy)Ru(CO)(H₂O)₂](OTf)₂ (R=H, Ph) formed by the decarbonylation of aldehydes (hexanal for 1,2‐hexanediol and 3‐hydroxypropanal for glycerol) generated in the reaction mixture through acid‐catalyzed dehydration. The structure of the dimeric complex [{(4′‐phenyl‐2,2′:6′,2′′‐terpy)Ru(CO)}₂(μ‐OCH₃)₂](OTf)₂ has been determined by single crystal X‐ray crystallography (Space group P (a=8.2532(17); b=12.858(3); c=14.363(3) Å; α=64.38(3); β=77.26(3); γ = 87.12(3)°, R=4.36 %).