Three‐dimensional networks in the 1:2 organic salts 2,2′‐biimidazolium bis(3‐carboxy‐4‐hydroxybenzenesulfonate) and 2,2′‐bibenzimidazolium bis(3‐carboxy‐4‐hydroxybenzenesulfonate) trihydrate

The two title compounds of 2,2′‐biimidazole (Bim) with 5‐sulfosalicylic acid (5‐H₂SSA) and 2,2′‐bibenzimidazole (Bbim) with 5‐H₂SSA are 1:2 organic salts, viz. C₆H₈N₄²⁺·2C₇H₅O₆S⁻, (I), and C₁₄H₁₂N₄²⁺·2C₇H₅O₆S⁻·3H₂O, (II). The cation of compound (I) lies on a centre of inversion, whereas that of (II) lies on a twofold axis. Whilst compound (I) is anhydrous, three water molecules are incorporated into the crystal structure of (II). The substitution of imidazole H atoms by other chemical groups may favour the incorporation of water molecules into the crystal structure. In both compounds, the component cations and anions adopt a homogeneous arrangement, forming alternating cation and anion layers which run parallel to the (001) plane in (I) and to the (100) plane in (II). By a combination of N—H...O, O—H...O and C—H...O hydrogen bonds, the ions in both compounds are linked into three‐dimensional networks. In addition, π–π interactions are observed between symmetry‐related benzene rings of Bbim²⁺ cations in (II).     

Three‐dimensional networks in 5‐methylimidazolium 3‐carboxy‐4‐hydroxybenzenesulfonate and bis(5‐methylimidazolium) 3‐carboxylato‐4‐hydroxybenzenesulfonate

The two title proton‐transfer compounds, 5‐methylimidazolium 3‐carboxy‐4‐hydroxybenzenesulfonate, C₄H₇N₂⁺·C₇H₅O₆S⁻, (I), and bis(5‐methylimidazolium) 3‐carboxylato‐4‐hydroxybenzenesulfonate, 2C₄H₇N₂⁺·C₇H₅O₆S²⁻, (II), are each organized into a three‐dimensional network by a combination of X—H...O (X = O, N or C) hydrogen bonds, and π–π and C—H...π interactions.     

Two three‐dimensional networks in the binary molecular adducts 4‐methylimidazolium hydrogen terephthalate and bis(4‐methylimidazolium) terephthalate

Both the 1:1 and 2:1 molecular adducts of 4‐methylimidazole (4‐MeIm) and terephthalic acid (H₂TPA) are organic salts, viz. C₄H₇N₂⁺·C₈H₅O₄⁻, (I), and 2C₄H₇N₂⁺·C₈H₄O₄²⁻, (II), respectively. The component ions in (I) are linked by N—H...O and O—H...O hydrogen bonds into continuous two‐dimensional layers built from R₆⁴(32) hydrogen‐bond motifs running parallel to the (100) plane. These adjacent two‐dimensional layers are in turn linked by a combination of C—H...O, C—H...π and π–π interactions into a three‐dimensional network. In the crystal structure of (II), with the anion located on an inversion centre, only N—H...O hydrogen bonds result in two‐dimensional layers built from R₈⁸(42) hydrogen‐bond motifs running parallel to the (102) plane. Being similar to those in (I), these layers are also linked by means of C—H...O, C—H...π and π–π interactions, forming a three‐dimensional network. This study indicates that, on occasion, a change of the reactant concentration can exert a pivotal influence on the construction of supramolecular structures based on hydrogen bonds.     

2,2′‐Bipyridinium bis(perchlorate)

The title compound, [H₂bipy](ClO₄)₂ or C₁₀H₁₀N₂²⁺·2ClO₄^?, was obtained at the interface between an organic (2,2′‐bi­pyridine in methanol) and an aqueous phase (perchloric acid in water). The compound crystallizes in space group P and comprises discrete diprotonated trans‐bipyridinium cations, [H₂bipy]²⁺, and ClO₄^? anions. The cations and anions are connected through N—H?O and C—H?O hydrogen bonds [distances N?O 2.817 (4) and 2.852 (4) Å, and C?O 3.225 (6)–3.412 (5)Å]. The C—C bond distance between the two rings is 1.452 (5) Å. The bipyridinium cation has a trans conformation and the N—C—C—N torsion angle is 152.0 (3)°.     

A three‐dimensional framework in 2,2′‐biimidazolium bis(2,2′‐biimidazole‐κ2N,N′)bis(biphenyl‐2,4′‐dicarboxylato‐κO)manganese(II) hexahydrate

In the title salt, (C₆H₈N₄)[Mn(C₁₄H₈O₄)₂(C₆H₆N₄)₂]·6H₂O, the Mn^II atom lies on an inversion centre and is coordinated by four N atoms from two 2,2′‐biimidazole (biim) ligands and two O atoms from two biphenyl‐2,4′‐dicarboxylate (bpdc) anions to give a slightly distorted octahedral coordination, while the cation lies about another inversion centre. Adjacent [Mn(bpdc)₂(biim)₂]²⁻ anions are linked via two pairs of N—H...O hydrogen bonds, leading to an infinite chain along the [100] direction. The protonated [H₂biim]²⁺ moiety acts as a charge‐compensating cation and space‐filling structural subunit. It bridges two [Mn(bpdc)₂(biim)₂]²⁻ anions through two pairs of N—H...O hydrogen bonds, constructing two R₂²(9) rings, leading to a zigzag chain in the [2] direction, which gives rise to a ruffled set of [H₂biim]²⁺[Mn(bpdc)₂(biim)₂]²⁻ moieties in the [01] plane. The water molecules give rise to a chain structure in which O—H...O hydrogen bonds generate a chain of alternating four‐ and six‐membered water–oxygen R₄²(8) and R₆⁶(12) rings, each lying about independent inversion centres giving rise to a chain along the [100] direction. Within the water chain, the (H₂O)₆ water rings are hydrogen bonded to two O atoms from two [Mn(bpdc)₂(biim)₂]²⁻ anions, giving rise to a three‐dimensional framework.     

Synthesis and characterization of novel polyimides with 2,2‐bis[4(4‐aminophenoxy)phenyl]phthalein‐3′,5′‐bis(trifluoromethyl)anilide

2,2‐Bis[4(4‐aminophenoxy)phenyl]phthalein‐3′,5′‐bis(trifluoromethyl)anilide (6FADAP), containing fluorine and phthalimide moieties, was synthesized via the Williamson ether condensation reaction from 1‐chloro‐4‐nitrobenzene and phenolphthalein‐3′,5′‐bis(trifluoromethyl)anilide, which was followed by hydrogenation. Monomers such as 2,2‐bis[4(4‐aminophenoxy)phenyl]phthalein‐anilide containing phthalimide groups and 2,2‐bis[4(4‐aminophenoxy)phenyl]phthalein containing only phthalein moieties were also synthesized for comparison. The monomers were first characterized by Fourier transform infrared (FTIR), ¹H NMR, ¹⁹F NMR, elemental analysis, and titration and were then used to prepare polyimides with 2,2‐bis(3,4‐dicarboxyphenyl)hexafluoropropane dianhydride. The polyimides were designed to have molecular weights of 20,000 g/mol via off‐stoichiometry and were characterized by FTIR, NMR, gel permeation chromatography (GPC), differential scanning calorimetry, and thermogravimetric analysis. Their solubility, water absorption, dielectric constant, and refractive index were also evaluated. The polyimides prepared with 6FADAP, containing fluorine and phthalimide moieties, had excellent solubility in N‐methylpyrrolidinone, N,N‐dimethylacetamide, tetrahydrofuran, CHCl₃, tetrachloroethane, and acetone, and GPC analysis showed a molecular weight of 18,700 g/mol. The polyimides also exhibited a high glass‐transition temperature (290 °C), good thermal stability (～500 °C in air), low water absorption (1.9 wt %), a low dielectric constant (2.81), a low refractive index, and low birefringence (0.0041). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3361–3374, 2003     

Bis[S‐6‐(2,2:6′,2′′‐terpyridin‐4′‐yloxy)hexyl thioacetate]manganese(II) bis(hexafluorophosphate)

The structure of a manganese(II) complex of terpyridine functionalized with acetylsulfanyl‐terminated hexyloxy chains, [Mn(C₂₃H₂₅N₃O₂S)₂](PF₆)₂, is described. This type of complex is of interest in the study of single‐molecule transport properties in open‐shell systems. The manganese coordination environment is distorted octahedral but, importantly, with no larger deviations from the idealized geometry than those observed for other metal–terpyridine complexes. The Mn—N bond lengths range from 2.192 (2) to 2.272 (3) Å. The title compound crystallizes with the cation and anions all on general positions, with the hexafluorophosphate anions exhibiting orientational disorder. When compared with other bis‐terpyridine complexes, this structure demonstrates that manganese(II) is no more prone to undergo low‐symmetry distortions than systems with ligand field stabilization energy contributions.     

A two‐dimensional layer in N,N′‐bis[2‐(hydroxymethyl)benzyl]ethylenediamine and a three‐dimensional network in N,N′‐bis[2‐(hydroxymethyl)benzyl]ethylenediammonium bis(perchlorate)

In both title compounds, C₁₈H₂₄N₂O₂, (Ia), and C₁₈H₂₆N₂O₂²⁺·2ClO₄⁻, (II), respectively, the two aryl rings are strictly parallel, with an inversion centre lying at the mid‐point of each central CH₂—CH₂ bond. Molecules in (Ia) are linked into two‐dimensional layers by N—H...O hydrogen bonds. The component ions in (II) are joined together by a combination of N/O/C—H...O hydrogen bonds and C—H...π and anion...π interactions, forming a three‐dimensional network. A structural understanding of (Ia) and (II) may provide some useful information about how and why their metal–organic complexes display various biological activities and function in catalytic processes.     

Packing effects in 4,4′‐bis(4‐hydroxy­butyl)‐2,2′‐bi­pyridine and 4,4′‐bis(4‐bromo­butyl)‐2,2′‐bi­pyridine

Structure analyses of 4,4′‐bis(4‐hydroxy­butyl)‐2,2′‐bi­pyridine, C₁₈H₂₄N₂O₂, (I), and 4,4′‐bis(4‐bromo­butyl)‐2,2′‐bi­pyridine, C₁₈H₂₂Br₂N₂, (II), reveal intermolecular hydrogen bonding in both compounds. For (I), O—H·N intermolecular hydrogen bonding leads to the formation of an infinite two‐dimensional polymer, and π stacking interactions are also observed. For (II), C—H·N intermolecular hydrogen bonding leads to the formation of a zigzag polymer. The two compounds crystallize in different crystal systems, but both mol­ecules possess C_i symmetry, with one half mol­ecule in the asymmetric unit.     

catena‐Poly[[(2,2′‐bipyridyl)oxidovanadium]‐di‐μ2‐oxido‐[(2,2′‐bipyridyl)oxidovanadium]‐μ3‐selenito‐bis[(2,2′‐bipyridyl)dioxidovanadium]‐μ3‐selenito]

In the title compound, [V₄O₈(SeO₃)₂(C₁₀H₈N₂)₄], there are two distinct vanadium coordination environments. Alternating corner‐shared VO₄N₂ octahedra and SeO₃ pyramids result in eight‐membered centrosymmetric V₂Se₂O₄ rings. In addition, pairs of V centres form centrosymmetric V₂O₆N₄ clusters via edge‐sharing. These two kinds of secondary building units are linked in an ABABAB fashion to give an infinite chain whose nature is unprecedented in Se–V–O systems.     

Novel,organosoluble, light‐colored fluorinated polyimides based on 2,2′‐bis(4‐amino‐2‐trifluoromethylphenoxy)biphenyl or 2,2′‐bis(4‐amino‐2‐trifluoromethylphenoxy)‐1,1′‐binaphthyl

Two series of fluorinated polyimides were prepared from 2,2′‐bis(4‐amino‐2‐trifluoromethylphenoxy)biphenyl ( 2 ) and 2,2′‐bis(4‐amino‐2‐trifluoromethylphenoxy)‐1,1′‐binaphthyl ( 4 ) with various aromatic dianhydrides via a conventional, two‐step procedure that included a ring‐opening polyaddition to give poly(amic acid)s, followed by chemical or thermal cyclodehydration. The inherent viscosities of the polyimides ranged from 0.54 to 0.73 and 0.19 to 0.36 dL/g, respectively. All the fluorinated polyimides were soluble in many polar organic solvents, such as N,N‐dimethylacetamide and N‐methylpyrrolidone, and afforded transparent and light‐colored films via solution‐casting. These polyimides showed glass‐transition temperatures in the ranges of 222–280 and 257–351 °C by DSC, softening temperatures in the range of 264–301 °C by thermomechanical analysis, and a decomposition temperature for 10% weight loss above 520 °C both in nitrogen and air atmospheres. The polyimides had low moisture absorptions of 0.23–0.58%, low dielectric constants of 2.84–3.61 at 10 kHz, and an ultraviolet–visible absorption cutoff wavelength at 351–434 nm. Copolyimides derived from the same dianhydrides with an equimolar mixture of 4,4′‐oxydianiline and diamine 2 or 4 were also prepared and characterized. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2416–2431, 2004     

The new three‐dimensional supramolecule bis{μ‐2‐[(4‐hydroxybenzoyl)hydrazonomethyl]phenolato}bis[aquacopper(II)] dinitrate

In the title centrosymmetric binuclear complex, [Cu₂(C₁₄H₁₁N₂O₃)₂(H₂O)₂](NO₃)₂, the two metal centres are bridged by the phenolate O atoms of the ligand, forming a Cu₂O₂ quadrangle. Each Cu atom has a distorted square‐pyramidal geometry, with the basal donor atoms coming from the O,N,O′‐tridentate ligand and a symmetry‐related phenolate O atom. The more weakly bound apical donor O atom is supplied by a coordinated water molecule. When a further weak Cu...O interaction with the 4‐hydroxy O atom of a neighbouring cation is considered, the extended coordination sphere of the Cu atom can be described as distorted octahedral. This interaction leads to two‐dimensional layers, which extend parallel to the (100) direction. The two‐dimensional polymeric structure contrasts with other reported structures involving salicylaldehyde benzoylhydrazone ligands, which are usually discrete mono‐ or dinuclear Cu complexes. The nitrate anions are involved in a three‐dimensional hydrogen‐bonding network, featuring intermolecular N—H...O and O—H...O hydrogen bonds.     

Dimethyl 2,2′‐bipyridine‐6,6′‐dicarboxylate and bis(dimethyl 2,2′‐bipyridine‐6,6′‐dicarboxylato‐κ2N,N′)copper(I) tetrafluoroborate

The single‐crystal X‐ray structures of dimethyl 2,2′‐bipyridine‐6,6′‐dicarboxylate, C₁₄H₁₂N₂O₄, and the copper(I) coordination complex bis(dimethyl 2,2′‐bipyridine‐6,6′‐dicarboxylato‐κ²N,N′)copper(I) tetrafluoroborate, [Cu(C₁₄H₁₂N₂O₄)₂]BF₄, are reported. The uncoordinated ligand crystallizes across an inversion centre and adopts the anticipated anti pyridyl arrangement with coplanar pyridyl rings. In contrast, upon coordination of copper(I), the ligand adopts an arrangement of pyridyl donors facilitating chelating metal coordination and an increased inter‐pyridyl twisting within each ligand. The distortion of each ligand contrasts with comparable copper(I) complexes of unfunctionalized 2,2′‐bipyridine.     

Cobalt(II) and cobalt(III) complexes with 4′‐(4‐cyanophenyl)‐2,2′:6′,2′′‐terpyridine

4′‐Cyanophenyl‐2,2′:6′,2′′‐terpyridine (cptpy) was employed as an N,N′,N′′‐tridentate ligand to synthesize the compounds bis[4′‐(4‐cyanophenyl)‐2,2′:6′,2′′‐terpyridine]cobalt(II) bis(tetrafluoridoborate) nitromethane solvate, [Co^II(C₂₂H₁₄N₄)₂](BF₄)₂·CH₃NO₂, (I), and bis[4′‐(4‐cyanophenyl)‐2,2′:6′,2′′‐terpyridine]cobalt(III) tris(tetrafluoridoborate) nitromethane sesquisolvate, [Co^III(C₂₂H₁₄N₄)₂](BF₄)₃·1.5CH₃NO₂, (II). In both complexes, the cobalt ions occupy a distorted octahedral geometry with two cptpy ligands in a meridional configuration. A greater distortion from octahedral geometry is observed in (I), which indicates a different steric consequence of the constrained ligand bite on the Co^II and Co^III ions. The crystal structure of (I) features an interlocked sheet motif, which differs from the one‐dimensional chain packing style present in (II). The lower dimensionality in (II) can be explained by the disturbance caused by the larger number of anions and solvent molecules involved in the crystal structure of (II). All atoms in (I) are on general positions, and the F atoms of one BF₄⁻ anion are disordered. In (II), one B atom is on an inversion center, necessitating disorder of the four attached F atoms, another B atom is on a twofold axis with ordered F atoms, and the C and N atoms of one nitromethane solvent molecule are on a twofold axis, causing disorder of the methyl H atoms. This relatively uncommon study of analogous Co^II and Co^III complexes provides a better understanding of the effects of different oxidation states on coordination geometry and crystal packing.     

2,2′‐(1,2‐Ethanediyldithio)bis(1,3‐benzothiazole)

In the title compound, C₁₆H₁₂N₂S₄, which is the result of the S‐alkyl­ation reaction of 2‐mercapto­benzo­thia­zole with ethyl­ene dibromide, the planes of the two benzo­thia­zole moieties form a dihedral angle of 3.84 (14)°. The bridging chain moiety, –SCH₂CH₂S–, adopts an antiperiplanar conformation. There are intermolecular S⃛S non‐bonded contacts of 3.6471 (9) Å, which stabilize the crystal packing.     

A two‐dimensional network in the molecular salt 2‐methylimidazolium hydrogen glutarate,and three‐dimensional networks in the salts 2‐methylimidazolium hydrogen succinate and 2‐methylimidazolium hydrogen adipate monohydrate

All three title compounds, C₄H₇N₂⁺·C₄H₅O₄⁻, (I), C₄H₇N₂⁺·C₅H₇O₄⁻, (II), and C₄H₇N₂⁺·C₆H₉O₄⁻·H₂O, (III), can be regarded as 1:1 organic salts. The dicarboxylic acids join through short acid bridges into infinite chains. Compound (I) crystallizes in the noncentrosymmetric Cmc2₁ space group and the asymmetric unit consists of a hydrogen succinate anion located on a mirror plane and a 2‐methylimidazolium cation disordered across the same mirror. The other two compounds crystallize in the triclinic P space group. The carboxylic acid H atom in (II) is disordered over both ends of the anion and sits on inversion centres between adjacent anions, forming symmetric short O...H...O bridges. Two independent anions in (III) sit across inversion centres, again with the carboxylic acid H atom disordered in short O...H...O bridges. The molecules in all three compounds are linked into two‐dimensional networks by combinations of imidazolium–carboxylate N⁺—H...O and carboxylate–carboxylate O—H...O hydrogen bonds. The two‐dimensional networks are further linked into three‐dimensional networks by C—H...O hydrogen bonds in (I) and by O_water—H...O hydrogen bonds in (III). According to the ΔpK_a rule, such 1:1 types of organic salts can be expected unambiguously. However, a 2:1 type of organic salt may be more easily obtained in (II) and (III) than in (I).     

Enhanced redox stability and electrochromic properties of aromatic polyamides based on N,N‐bis(4‐carboxyphenyl)‐N′,N′‐bis(4‐tert‐butylphenyl)‐1,4‐phenylenediamine

A new bis(triphenylamine)‐type dicarboxylic acid monomer, N,N‐bis(4‐carboxyphenyl)‐N′,N′‐bis(4‐tert‐butylphenyl)‐1,4‐phenylenediamine, was prepared by a well‐established procedure and led to a new family of redox‐active aromatic polyamides with di‐tert‐butyl‐substituted N,N,N′,N′‐tetraphenylphenylenediamine (TPPA) segments. The resulting polyamides were amorphous with good solubility in many organic solvents, and most of them could be solution cast into flexible polymer films. The polyamides exhibited high thermal stability with glass‐transition temperatures in the range of 247–293 °C and 10% weight‐loss temperatures in excess of 500 °C. They showed well‐defined and reversible redox couples during oxidative scanning, with a strong color change from a colorless or pale yellowish neutral form to green and blue oxidized forms. They had enhanced redox stability and electrochromic performance when compared with the corresponding analogs without tert‐butyl substituents on the TPPA unit. The polyamide with TPPA units in both the diacid and diamine components shows multicolored electrochromic behavior. A polyamide containing both the cathodic coloring anthraquinone chromophore and the anodic coloring TPPA chromophore has the ability to show red, green, and blue states, toward single‐component RGB electrochromics. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

4,4′‐(Azinodimethylene)dipyridinium bis(tetrafluoroborate) and 4‐[(4‐pyridylmethylene)hydrazonomethyl]pyridinium perchlorate: two different hydrogen‐bonding motifs

In the crystal structures of the title compounds, C₁₂H₁₂N₄²⁺·2BF₄⁻, (I), and C₁₂H₁₁N₄⁺·ClO₄⁻, (II), respectively, infinite two‐ and one‐dimensional architectures are built up via N—H...F [in (I)] and conventional N—H...N [in (II)] hydrogen bonding. The N—N single bond in (I) lies on a crystallographic centre of symmetry; as a result, the two pyridinium rings are parallel. In (II), the pyridinium and pyridyl ring planes are inclined with a dihedral angle of 14.45 (3)°.     

The reaction of di‐n‐butyltin oxide with hexafluoro‐2,2‐bis(4‐carboxyphenyl)propane

The reaction of hexafluoro‐2,2‐bis(4‐carboxyphenyl)propane with tetrabutyldipropoxydistannoxane, formed in situ from dibutyltin oxide and n‐propanol in benzene, yields a compound the structure of which is a strained macrocycle with a single dicarboxylate moiety. Copyright © 1999 John Wiley & Sons, Ltd.     

Supramolecular interactions in a copper(II) 4′‐(4‐bromophenyl)‐2,2′:6′,2′′‐terpyridine complex

The title compound, [4′‐(4‐bromophenyl)‐2,2′:6′,2′′‐terpyridine]chlorido(trifluoromethanesulfonato)copper(II), [Cu(CF₃O₃S)Cl(C₂₁H₁₄BrN₃)], is a new copper complex containing a polypyridyl‐based ligand. The Cu^II centre is five‐coordinated in a square‐pyramidal manner by one substituted 2,2′:6′,2′′‐terpyridine ligand, one chloride ligand and a coordinated trifluoromethanesulfonate anion. The Cu—N bond lengths differ by 0.1 Å for the peripheral and central pyridine rings [2.032 (2) (mean) and 1.9345 (15) Å, respectively]. The presence of the trifluoromethanesulfonate anion coordinated to the metal centre allows Br...F halogen–halogen interactions, giving rise to the formation of a dimer about an inversion centre. This work also demonstrates that the rigidity of the ligand allows the formation of other types of nonclassical interactions (C—H...Cl and C—H...O), yielding a three‐dimensional network.