Ultra Rapid Approaches to Mild Macromolecular Conjugation

In light of the increasing demand for ultra rapid and mild conjugation chemistries for use in macromolecular chemistry, the present Feature Article provides a critical overview of the very latest developments in this field. The principal aim, therefore, is the provision of a quick selection guide to aid in the formulation of a design strategy for novel functional materials and to provide recommendations for future developments in the chemistries discussed.

     

Supramolecular Hydrogels with CdS Quantum Dots Incorporated by Host–Guest Interactions

In this communication, β‐cyclodextrin modified quantum dots were used as a water‐soluble “supramolecular” cross‐linker (SCL) because of its surface's supramolecular activity. The guest monomer‐loaded SCL (mSCL) can be used to copolymerize with water‐soluble monomers leading to transparent hybrid supramolecular hydrogels. This simple and versatile method opens new venues for the preparation of hybrid supramolecular hydrogels and the host–guest chemistry of cyclodextrins.

     

Photo‐Induced Solid‐State Crosslinking of Electrospun Poly(vinyl alcohol) Fibers

Summary: Poly(vinyl alcohol) (PVA) was derivatized by polymer analogous reaction with thienyl acryloyl chloride and processed to submicrometer fibers by electrospinning from aqueous solution. Water solubility of otherwise water‐soluble PVA fibers was reduced considerably by UV crosslinking of thienyl acrylate modified PVA fibers in the solid state. Water stability of these crosslinked fibers was proven by water steam test at 95 °C.

UV/Vis spectrum of PVA‐Thio fibers irradiated for different periods at 300 nm.     

Melt Dispersion and Electrospinning of Non‐Functionalized Multiwalled Carbon Nanotubes in Thermoplastic Polyurethane

Nanoscale fibers with embedded, aligned, and percolated non‐functionalized multiwalled carbon nanotubes (MWCNTs) were fabricated through electrospinning dispersions based on melt‐compounded thermoplastic polyurethane/MWCNT nanocomposite, with up to 10 wt.‐% MWCNTs. Transmission electron microscopy indicated that the nanotubes were highly oriented and percolated throughout the fibers, even at high MWCNT concentrations. The coupling of efficient melt compounding with electrospinning eliminated the need for intensive surface functionalization or sonication of the MWCNTs, and the high aspect ratio as well as the electrical and mechanical properties of the nanotubes were retained. This method provides a more efficient technique to generate one‐dimensional nanofibers with aligned MWCNTs.

     

Polymer/Laponite Composite Latexes: Particle Morphology,Film Microstructure,and Properties

Transparent film materials with excellent mechanical and thermal properties were elaborated by drying a latex suspension of armored polymer/Laponite composite particles. Low‐temperature TEM observation of ultrathin cross‐sections of the films indicated a unique network morphology characterized by a “honeycomb” distribution of the Laponite platelets remindful of the original particles morphology.

     

Direct Ion Exchange Self‐Metallization: A Novel and Efficient Route for the Preparation of Double‐Surface‐Silvered Polyimide Films

Summary: Silvered polyimide films have been fabricated by direct ion exchange of a damp‐dry poly(amic acid) film with an aqueous silver solution such as silver nitrate. Thermal curing of the silver(I )‐containing films under tension leads to cycloimidization of the poly(amic acid) into polyimide with a concomitant silver(I ) reduction and aggregation at both film sides to give reflective and conductive double‐surface‐silvered polyimide films. The metallized films retain the essential properties of the parent polyimide.

Surface morphology of the prepared double‐surface‐silvered polyimide films.     

Chemoenzymatic Synthesis of Amylose‐Grafted Chitosan

An amylose‐grafted chitosan has been synthesized by a chemoenzymatic method according to the following two reactions. First, maltoheptaose is introduced to chitosan by a reductive amination using sodium cyanotrihydroborate in a mixed solvent of 1.0 mol · L⁻¹ aqueous acetic acid and methanol at room temperature to produce a maltoheptaose‐grafted chitosan that has a well‐defined molecular structure. A phosphorylase‐catalyzed enzymatic polymerization of α‐D ‐glucose 1‐phosphate is then performed from the maltoheptaose‐grafted chitosan to obtain the amylose‐grafted chitosan. This material does not dissolve in any solvent, e.g., aqueous acetic acid and dimethyl sufoxide, which are good solvents for chitosan and amylose, respectively.

     

Photocrosslinkable Liquid Crystal Main‐Chain Polymers: Thin Films and Electrospinning

For mechanical actuators, a response to external stimuli is required. Main‐chain liquid crystal elastomers (MCLCEs) show high response to changes in temperature especially in the vicinity of a phase transition. Most of these crosslinked materials were synthesized in a one‐step reaction which leads to a macroscopically aligned elastomer. Up to now only macroscopic samples have been prepared. We are presenting a new approach which allows us to prepare thin films as well as aligned fibers. First a liquid crystalline main‐chain polymer with a photoactive moiety was synthesized, which was oriented by a mechanical field and photocrosslinked. The thin films show exceptional mechanical properties such as large temperature‐dependent changes in length and a nonlinear stress–strain relation. To obtain fibers, we used the electrospinning process from solution with in situ UV curing. We obtained crosslinked fibers with a uniform alignment of the nematic director.

     

Preparation of Antimicrobial Ultrafine Cellulose Acetate Fibers with Silver Nanoparticles

Summary: A feasible method for the preparation of antimicrobial ultrafine fibers with silver nanoparticles was developed by direct electrospinning of a cellulose acetate (CA) solution with small amounts of silver nitrate followed by photoreduction. Silver nanoparticles in ultrafine CA fibers were stabilized by interactions with carbonyl oxygen atoms in CA. Ultrafine CA fibers with silver nanoparticles showed very strong antimicrobial activity.

TEM image of an ultrafine CA fiber electrospun from 10 wt.‐% CA solution with 0.5 wt.‐% AgNO₃.     

Surfactant‐Free Spinning of Composite Carbon Nanotube Fibers

Summary: Fibers and yarns are promising forms to use and control the spatial orientation of carbon nanotubes in macroscopic materials. Various approaches have been proposed in the last few years to achieve fibers with a fraction of carbon nanotubes. Among them, coagulation spinning in aqueous media has proven to be a simple and capable method of leading to super‐tough materials. However, all water‐based processes described so far have made use of surfactant‐stabilized carbon nanotubes. In the present work, a method is shown to spin fibers from surfactant‐free nanotube solutions while preserving an all water‐based process. The resultant fibers exhibit mechanical and electrical properties that compare well with those of previously reported fibers spun with surfactants. The fibers exhibit a significant toughness and a high electrical conductivity.

Scanning electron micrograph of the fiber, showing the surface texture.     

Fabrication of Nanostructured Self‐Detoxifying Nanofiber Membranes that Contain Active Polymeric Functional Groups

Military soldiers, medicinal doctors, and ordinary people require protection against chemical and biological warfare (C&B) agents. Activated charcoal impregnated with metal ions is currently used in protective clothing applications, which has some disadvantages. Electrospinning is emerging as one of the cheapest technologies to produce continuous nanofibers with a high surface area‐to‐volume ratio. In the present study, electrospinning of a poly(ethylene imine) (PEI)/nylon blend has been carried out in which PEI acts as a support material as well as a catalytic media. The membrane is combined with non‐selective metal oxide nanoparticles to degrade C&B agents into non‐toxic products. In addition, these membranes possess hydrophilic properties, hence they are suitable candidates for protective clothing applications.

     

Combining RAFT Radical Polymerization and Click/Highly Efficient Coupling Chemistries: A Powerful Strategy for the Preparation of Novel Materials

This paper highlights the powerful combination of reversible addition–fragmentation chain transfer (RAFT) radical polymerization and various click/coupling chemistries. This is not an exhaustive review but rather an overview demonstrating the impressive possibilities that the “marriage” of these two synthetic approaches offers in modern macromolecular design and synthesis.

     

On the Use of the Nanoindentation Unloading Curve to Measure the Young's Modulus of Polymers on a Nanometer Scale

Summary: The nanoindentation test is a fundamental tool to assess the link between morphology and mechanical properties. The preliminary results of a more exhaustive study about the applicability to polymers of the most used procedure to determine elastic modulus by indentation are reported in this short communication. A departure of the experimental conditions from the theoretical assumptions and results that give rise to the Oliver and Pharr analysis is shown to occur under a wide range of experimental conditions, with applied loads and penetration depths covering several orders of magnitude and using different indenter geometries. Unloading curves with exponents significantly larger than 2 are observed in disagreement with the contact mechanics approach used by Oliver and Pharr.

An AFM image obtained in non contact mode of an indentation induced by a sharp AFM tip with a maximum applied load of ca 1.2 µN on amorphous PET.