20‐Hydroxy­imino‐5α‐pregna‐9(11),16‐dien‐3β‐yl acetate and 17‐oxo‐5α‐androst‐9(11)‐en‐3β‐yl acetate

In the title compounds, C₂₃H₃₃NO₃ and C₂₁H₃₀O₃, respectively, the ester linkage in ring A is equatorial. In these steroids, the six‐membered rings A and B have chair conformations, but ring C can be better described as a half‐chair. The five‐membered ring D adopts a 14α‐envelop conformation. The A/B, B/C and C/D ring junctions are trans.     

5β,6β‐Epoxy‐17‐oxoandrostan‐3β‐yl acetate and 5β,6β‐epoxy‐20‐oxopregnan‐3β‐yl acetate

In the title compounds, C₂₁H₃₀O₄, (I), and C₂₃H₃₄O₄, (II), respectively, which are valuable intermediates in the synthesis of important steroid derivatives, rings A and B are cis‐(5β,10β)‐fused. The two molecules have similar conformations of rings A, B and C. The presence of the 5β,6β‐epoxide group induces a significant twist of the steroid nucleus and a strong flattening of the B ring. The different C17 substituents result in different conformations for ring D. Cohesion of the molecular packing is achieved in both compounds only by weak intermolecular interactions. The geometries of the molecules in the crystalline environment are compared with those of the free molecules as given by ab initio Roothan Hartree–Fock calculations. We show in this work that quantum mechanical ab initio methods reproduce well the details of the conformation of these molecules, including a large twist of the steroid nucleus. The calculated twist values are comparable, but are larger than the observed values, indicating a possible small effect of the crystal packing on the twist angles.     

17‐Oxo‐5α‐androst‐6‐en‐3β‐yl acetate

In the title compound, C₂₁H₃₀O₃, a potential inhibitor of aromatase, all rings are fused trans. Rings A and C have chair conformations which are slightly flattened, whereas the conformation of ring B is close to a half‐chair. Ring D has a 14α‐envelope conformation. The steroid nucleus has a small twist, as shown by the C19—C10⋯C13—C18 (steroid numbering) torsion angle of −6.9 (3)°. Ab initio calculations of the equilibrium geometry of the mol­ecule reproduce this small twist, which appears to be due to the conformation of ring B rather than to packing effects.     

16α,17α‐Epoxy‐20‐oxopregn‐5‐en‐3β‐yl acetate

The title compound, C₂₃H₃₂O₄, has a 3β configuration, with the epoxy O atom at 16α,17α. Rings A and C have slightly distorted chair conformations. Because of the presence of the C5=C6 double bond, ring B assumes an 8β,9α‐half‐chair conformation slightly distorted towards an 8β‐sofa. Ring D has a conformation close to a 14α‐envelope. The acetoxy and acetyl substituents are twisted with respect to the average molecular plane of the steroid. The conformation of the mol­ecule is compared with that given by a quantum chemistry calculation using the RHF–AM1 (RHF = Roothaan Hartree–Fock) Hamiltonian model. Cohesion of the crystal can be attributed to van der Waals interactions and weak intermolecular C—H?O interactions, which link the mol­ecules head‐to‐tail along [101].     

6β‐Azido‐7α‐hydroxy‐17‐oxo‐5α‐androstan‐3β‐yl acetate

In the title compound, C₂₁H₃₁N₃O₄, a potential inhibitor of aromatase, all rings are fused trans. Rings A, B and C have chair conformations which are slightly flattened. Ring D has a 14α‐envelope conformation. The steroid nucleus has a small twist, as shown by the C19—C10⋯C13—C18 torsion angle of 6.6 (2)°. Ab initio calculations of the equilibrium geometry of the mol­ecule reproduce this small twist, which appears to be due to the steric effect of the 6β‐azide substituent rather than to packing effects.     

16‐Cyano‐13α‐(5‐methyl‐1,3,4‐oxa­diazol‐2‐yl)‐13,16‐seco‐17‐nor­androst‐5‐en‐3β‐yl acetate

In the title compound, C₂₃H₃₁N₃O₃, the outer cyclo­hexane rings have chair conformations, while the central cyclohexene ring adopts a half‐chair conformation. In the solid state, intra‐ and intermolecular C—H⋯N interactions are observed.     

Dicyano(7‐methyl‐6‐oxo‐6H‐dibenzo[b,d]pyran‐9‐yl)methanide Salts via a Multicomponent Reaction

Dialkylammonium dicyano(7‐methyl‐6‐oxo‐6H‐dibenzo[b,d]pyran‐9‐yl)methanides 4a – 4j are obtained in good yields via a simple reaction between 3‐acetylcoumarins (=3‐acetyl‐2H‐1‐benzopyran‐2‐ones) 1 and malononitrile ( 2 ) in EtOH (Table 1). In this reaction, a charge‐separated zwitterionic salt is formed.     

Oxidative Fragmentations of the 5α‐ and 5β‐Hydroxy‐B‐norcholestan‐ 3β‐yl Acetates

Oxidations of 5α‐hydroxy‐B‐norcholestan‐3β‐yl acetate ( 8 ) with Pb(OAc)₄ under thermal or photolytic conditions or in the presence of iodine afforded only complex mixtures of compounds. However, the HgO/I₂ version of the hypoiodite reaction gave as the primary products the stereoisomeric (Z)‐ and (E)‐1(10)‐unsaturated 5,10‐seco B‐nor‐derivatives 10 and 11 , and the stereoisomeric (5R,10R)‐ and (5S,10S)‐acetals 14 and 15 (Scheme 4). Further reaction of these compounds under conditions of their formation afforded, in addition, the A‐nor 1,5‐cyclization products 13 and 16 (from 10 ) and 12 (from 11 ) (see also Scheme 6) and the 6‐iodo‐5,6‐secolactones 17 and 19 (from 14 and 15 , resp.) and 4‐iodo‐4,5‐secolactone 18 (from 15 ) (see also Scheme 7). Oxidations of 5β‐hydroxy‐B‐norcholestan‐3β‐yl acetate ( 9 ) with both hypoiodite‐forming reagents (Pb(OAc)₄/I₂ and HgO/I₂) proceeded similarly to the HgO/I₂ reaction of the corresponding 5α‐hydroxy analogue 8 . Photolytic Pb(OAc)₄ oxidation of 9 afforded, in addition to the (Z)‐ and (E)‐5,10‐seco 1(10)‐unsaturated ketones 10 and 11 , their isomeric 5,10‐seco 10(19)‐unsaturated ketone 22 , the acetal 5‐acetate 21 , and 5β,19‐epoxy derivative 23 (Scheme 9). Exceptionally, in the thermal Pb(OAc)₄ oxidation of 9 , the 5,10‐seco ketones 10, 11 , and 22 were not formed, the only reaction being the stereoselective formation of the 5,10‐ethers with the β‐oriented epoxy bridge, i.e. the (10R)‐enol ether 20 and (5S,10R)‐acetal 5‐acetate 21 (Scheme 8). Possible mechanistic interpretations of the above transformations are discussed.     

Enantioselective Total Synthesis of 3β‐Hydroxy‐7β‐kemp‐8(9)‐en‐6‐one,a Diterpene Isolated from Higher Termites

The first total synthesis of the title diterpene was accomplished starting from the Wieland–Miescher ketone. A diastereoselective sulfa‐Michael addition enabled the generation of the delicate β,γ‐unsaturated ketone moiety, while the tetracyclic kempane skeleton was readily constructed through domino metathesis.     

6‐[3‐Hydroxy‐17‐oxoestra‐1,3,5(10)‐trien‐7β‐yl]­hexane­nitrile

In the title compound, C₂₄H₃₁NO₂, ring B adopts a conformation between the boat and twisted‐boat forms. This conformation best accommodates adverse intramolecular H⋯H interactions between the H atoms of the 7β‐substituent and the two nearest ring H atoms. The tilt angle between rings A and D is 28.6 (1)°.     

Synthesis of 5‐Hydroxy‐2‐(naphth‐2‐yl)chromone derivatives

The Diels‐Alder reaction of 5‐hydroxy‐2‐styrylchromones with ortho‐benzoquinodimethane, generated “in situ” by thermal extrusion of sulfur dioxide from 1,3‐dihydrobenzo[c]thiophene 2,2‐dioxide, leads to 2‐(3‐aryl‐1,2,3,4‐tetrahydronaphth‐2‐yl)‐5‐hydroxychromones. These cycloadducts were dehydrogenated with DDQ, using classical thermal reflux conditions and microwave irradiation, affording the corresponding 2‐(3‐arylnaphth‐2‐yl)‐5‐hydroxychromones in high yields (48‐96%).     

Homo‐ and copolymerization of norbornene and 5‐norbornene‐2‐yl acetate with bis‐(β‐ketonaphthylamino)palladium(II)/B(C6F5)3 catalytic system

The polymerization of norbornene with bis(β‐ketonaphthylamino) palladium(II), Pd{CH₃C(O)CHC[N(naphthyl)]CH₃}₂, in combination with tris(pentafluorophenyl)borane (B(C₆F₅)₃), was investigated by varying the B:Pd(II) molar ratio, monomer concentration, reaction temperature, and time. The catalytic activity was found to reach 2.8 × 10⁴ gPolymer/(molPd^?h) and the obtained polynorbornene (PNBE) was confirmed to be vinyl addition polymer and showed good thermo‐stability (T_dec > 350°C), but exhibited poor solubility in organic solvents due to the relative higher stereo regularity. Pd{CH₃C(O)CHC[N(naphthyl)]CH₃}₂/B(C₆F₅)₃ system is also an active catalyst for copolymerization of norbornene and 5‐norbornene‐2‐yl acetate (NBE‐OCOCH₃) in toluene with moderate yields (in 9.2–36.5% yields) and produces the addition‐type copolymer with relatively high molecular weights (0.96 × 10⁴–2.13 × 10⁴ g/mol). The incorporation of functional group in the copolymer can be controlled up to 0.9–23.5 mol% by varying the NBE‐OCOCH₃ monomer feed ratios from 10 to 90%. The copolymers are proved to be noncrystalline and show good solubility in common organic solvents and excellent thermal stability up to 350°C. Copyright © 2011 John Wiley & Sons, Ltd.     

3,17‐Dioxoandrost‐4‐en‐4‐yl acetate

The title compound, C₂₁H₂₈O₄, has a 4‐acetoxy substituent positioned on the steroid α face. The six‐membered ring A assumes a conformation intermediate between 1α,2β‐half chair and 1α‐sofa. A long Csp³—Csp³ bond is observed in ring B and reproduced in quantum‐mechanical ab initio calculations of the isolated molecule using a molecular‐orbital Hartree–Fock method. Cohesion of the crystal can be attributed to van der Waals interactions and weak C—H...O hydrogen bonds.     

Copolymerization of norbornene and 5‐norbornene‐2‐yl acetate using novel bis(β‐ketonaphthylamino)Ni(II)/B(C6F5)3/AlEt3 catalytic system

Vinyl‐type copolymerization of norbornene (NBE) and 5‐NBE‐2‐yl‐acetate (NBE‐OCOMe) in toluene were investigated using a novel homogeneous catalyst system based on bis(β‐ketonaphthylamino)Ni(II)/B(C₆F₅)₃/AlEt₃. The copolymerization behavior as well as the copolymerization conditions, such as the levels of B(C₆F₅)₃ and AlEt₃, temperature, and monomer feed ratios, which influence on the copolymerization were examined. Without combination of AlEt₃, the catalytic bis(β‐ketonaphthylamino)Ni(II)/B(C₆F₅)₃ exhibited very high catalyst activity for polymerization of NBE. Combination of AlEt₃ in catalyst system resulted in low conversion for polymerization of NBE. For copolymerization of NBE and NBE‐OCOMe, involvement of AlEt₃ in catalyst is necessary. Slight addition of NBE‐OCOMe in copolymerization of NBE and NBE‐OCOMe gives rise to significant increase of catalyst activity for catalytic system bis(β‐ketonaphthylamino)Ni(II)/B(C₆F₅)₃/AlEt₃. Nevertheless, excess increase of the NBE‐OCOMe content in the comonomer feed ratios results in decrease of conversion as well as activity of catalyst. The achieved copolymers were confirmed to be vinyl‐addition copolymers through the analysis of FTIR, ¹H NMR, and ¹³C NMR spectra. ¹³C NMR studies further revealed the composition of the copolymer and the incorporation rate was 7.6–54.1 mol % ester units at a content of 30–90 mol % of the NBE‐OCOMe in the monomer feeds ratios. TGA analysis results showed that the copolymer exhibited good thermal stability (T_d > 410 °C) and failed to observe the glass transitions temperature over 300 °C. The copolymers are confirmed to be noncrystalline by WAXD analysis results and show good solubility in common organic solvents. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3990–4000, 2009     

The α‐ and β‐epoxides of 3β‐acet­oxy‐5α‐lanost‐9(11)‐en‐7‐one

The structures of 3β‐acet­oxy‐9α,11α‐ep­oxy‐5α‐lanost‐9(11)‐en‐7‐one and 3β‐acet­oxy‐9β,11β‐ep­oxy‐5α‐lanost‐9(11)‐en‐7‐one, C₃₂H₅₂O₄, differ in their respective substituted cyclo­hexa­none rings but adopt similar conformations in the other three rings. In both of the crystal structures, weak inter­molecular C—H⋯O inter­actions are present.     

2‐Hydroxy‐3‐(3‐oxobut­yl)naphthalene‐1,4‐dione

The title compound, C₁₄H₁₂O₄, forms crystals which appear monoclinic but are actually twinned triclinic. The asymmetric unit consists of two similar mol­ecules, which differ only in the conformation of the 3‐oxobutyl side chain. The mol­ecular conformation is characterized by an intra­molecular O—H⋯O hydrogen bond between the hydroxy group and the adjacent carbonyl O atom. The crystal structure is stabilized by O—H⋯O hydrogen bonds connecting the mol­ecules into zigzag chains running along the b axis.