Identification of segregation phase on a batch hot‐dip‐coated Zn/0.1Al/0.2Sb surface

The segregation of antimony in a batch hot‐dipped regular‐spangle galvanized coating from a Zn‐0.1Al‐0.2Sb bath was investigated. The samples were characterized by using SEM/EDS. The nature of the segregation phase was determined by XRD as βSb₃Zn₄. Assisted with Sb? Zn phase diagram, the behavior of antimony during the solidification process of the Zn‐0.1Al‐0.2Sb coating is examined. It is suggested that the coating solidification proceeds in three stages. Owing to the cooling rate of batch hot dip galvanizing process smaller than that of continuous hot dip galvanizing line (CGL), the resulting structure of the segregation phase in current work is βSb₃Zn₄ instead of metastable ζSb₂Zn₃ for CGL. Copyright © 2007 John Wiley & Sons, Ltd.     

Electrochemical analysis of molybdate conversion coating on hot‐dip galvanized steel in various growth stages

The electrochemical behavior of molybdate conversion coatings in various growth stages was investigated by electrochemical impedance spectroscopy and equivalent circuits. The chemical composition and microstructure were characterized by SEM/energy dispersive spectroscopy, atomic force microscopy, and AES. Neutral salt spray tests complemented the information. The results indicated that the growth process of the molybdate conversion coating was accompanied by the growth of micro cracks, consisting of three stages: in the early and middle stages, the protective property of the coatings increased with increasing treatment time and then decreased when the cracks developed in the last stage. On the basis of the observation of the microstructure and the analysis of the electrochemical impedance spectra of the coatings in various stages, a simplified growth process model of the molybdate conversion coating on hot‐dip galvanized steel was created. Copyright © 2017 John Wiley & Sons, Ltd.     

Effect of formulation of silica‐based solution on corrosion resistance of silicate coating on hot‐dip galvanized steel

Several silica‐based solutions with 50 g/l of SiO₂ were prepared from sodium silicate solutions and silica sol; the silicate conversion coatings were obtained by immersing hot‐dip galvanized steel sheets in these solutions. These solutions were characterized using high‐resolution transmission electron microscopy and ²⁹Si nuclear magnetic resonance; the morphology of the coatings was observed by SEM and atomic force microscopy while the corrosion resistance was evaluated by electrochemical measurements as well as neutral salt spray tests. The results show that the coatings obtained from the single silica sol solution had poor adhesion and the coating obtained from the sodium silicate solution with low SiO₂/Na₂O molar ratio was uneven. By adding the silica sol to the silicate solution with low molar ratio, uniform coatings with better protection property were obtained. According to the results of ²⁹Si nuclear magnetic resonance spectra, the effects of the distribution of silicate anions with various polymerization degrees in the silica‐based solutions on the microstructure and corrosion resistance of the silicate coatings are discussed. Copyright © 2016 John Wiley & Sons, Ltd.     

Electroless plating of copper on Si(100) surfaces modified by surface‐initiated atom‐transfer radical polymerization of 4‐vinylpyridine

Surface‐initiated atom‐transfer radical polymerization (ATRP) of 4‐vinylpyridine (4VP) on a pretreated Si(100) surface was carried out. The composition and topography of the Si(100) surface modified by poly(4‐vinylpyridine) (P4VP) were characterized by XPS and atomic force microscopy (AFM), respectively. The P4VP layer on the Si(100) surface was used not only as chemisorption sites for the palladium complexes without prior sensitization by SnCl₂ solution during the electroless plating, but also as an adhesion promotion layer for the electrolessly deposited copper. The electrolessly deposited copper on the Si–P4VP surface exhibited a 180° peel adhesion strength above 6 N/cm. The adhesion strength was much higher than that of the electrolessly deposited copper to the pristine silicon surface. Copyright © 2008 John Wiley & Sons, Ltd.     

Inter‐diffusion effects in as‐deposited Al/Ni polycrystalline multi‐layers

Al/Ni multi‐layers, deposited by magnetron sputtering at room temperature have been studied by complementary techniques; XPS, sputter depth profiling, electron‐induced X‐ray emission spectroscopy (XES) and X‐ray diffraction (XRD). XPS depth profile technique evidenced an atomic diffusion dominated by Ni atoms. Moreover, the Ni diffusion results in the formation of an amorphous phase with a stoichiometry close to the Al₃Ni aluminide. Copyright © 2008 John Wiley & Sons, Ltd.     

Magnetic‐based picolinaldehyde–melamine copper complex for the one‐pot synthesis of hexahydroquinolines via Hantzsch four‐component reactions

A picolinaldehyde–melamine copper complex was loaded on a magnetic Fe₃O₄ core, so that it contained 0.33 mmol of Cu per gram, and was used as an efficient catalyst. The as‐synthesized catalyst was characterized using various techniques, including Fourier transform infrared spectroscopy, X‐ray diffraction, energy‐dispersive X‐ray spectroscopy, field emission scanning electron microscopy, transmission electron microscopy, vibrating sample magnetometry and thermogravimetric analysis. The catalyst was used to activate the raw materials in the synthesis of hexahydroquinoline derivatives in one‐pot four‐component reactions. Low reaction time (minutes versus half an hour), solvent‐free condition and magnetically separable catalyst are some salient features of the developed catalyst. Also, the optimum amount of catalyst and temperature were determined as 0.07 g and 87.6 °C, respectively, which were obtained using response surface methodology and optimization techniques.     

Study of gas‐phase reactions of NO2+ with aromatic compounds using proton transfer reaction time‐of‐flight mass spectrometry

The study of ion chemistry involving the NO₂⁺ is currently the focus of considerable fundamental interest and is relevant in diverse fields ranging from mechanistic organic chemistry to atmospheric chemistry. A very intense source of NO₂⁺ was generated by injecting the products from the dielectric barrier discharge of a nitrogen and oxygen mixture upstream into the drift tube of a proton transfer reaction time‐of‐flight mass spectrometry (PTR‐TOF‐MS) apparatus with H₃O⁺ as the reagent ion. The NO₂⁺ intensity is controllable and related to the dielectric barrier discharge operation conditions and ratio of oxygen to nitrogen. The purity of NO₂⁺ can reach more than 99% after optimization. Using NO₂⁺ as the chemical reagent ion, the gas‐phase reactions of NO₂⁺ with 11 aromatic compounds were studied by PTR‐TOF‐MS. The reaction rate coefficients for these reactions were measured, and the product ions and their formation mechanisms were analyzed. All the samples reacted with NO₂⁺ rapidly with reaction rate coefficients being close to the corresponding capture ones. In addition to electron transfer producing [M]⁺, oxygen ion transfer forming [MO]⁺, and 3‐body association forming [M·NO₂]⁺, a new product ion [M−C]⁺ was also formed owing to the loss of C═O from [MO]⁺.This work not only developed a new chemical reagent ion NO₂⁺ based on PTR‐MS but also provided significant interesting fundamental data on reactions involving aromatic compounds, which will probably broaden the applications of PTR‐MS to measure these compounds in the atmosphere in real time.     

Thermal Decomposition Behavior and Non-isothermal Decomposition Reaction of Copper（ll） Salt of 4-Hydroxy-3,5-dinitropyridine Oxide and Its Application in Solid Rocket Propellant

The thermal decomposition behavior and kinetic parameters of the exothermic decomposition reactions of the title compound in a temperature‐programmed mode have been investigated by means of DSC, TG‐DTG and lower rate Thermolysis/FTIR. The possible reaction mechanism was proposed. The critical temperature of thermal explosion was calculated. The influence of the title compound on the combustion characteristic of composite modified double base propellant containing RDX has been explored with the strand burner. The results show that the kinetic model function in differential form, apparent activation energy E_a and pre‐exponential factor A of the major exothermic decomposition reaction are 1‐a,207.98 kJ*mol^?1 and 10^15.64 s^?1, respectively. The critical temperature of thermal explosion of the compound is 312.87 C. The kinetic equation of the major exothermic decomposition process of the title compound at 0.1 MPa could be expressed as: dα/dT=10^16.42 (1–α)e‐2.502×10⁴/T As an auxiliary catalyst, the title compound can help the main catalyst lead salt of 4‐hydroxy‐3,5dinitropyridine oxide to enhance the burning rate and reduce the pressure exponent of RDX‐CMDB propellant.     

A practical synthesis of 2‐aminobenzothiazoles via copper(I)‐catalyzed tandem reaction of 2‐iodoanilines with isothiocyanates in ionic liquids

A copper(I)‐catalyzed tandem reaction of 2‐iodoanilines with isothiocyanates was achieved in hydrophobic [bmim][PF₆] ionic liquid under mild conditions, generating a variety of 2‐aminobenzothiazoles in good to excellent yields. The tandem reaction that was carried out in [bmim][PF₆] has some obvious advantages such as accelerated reaction rate and increased yield as compared with the reaction run in volatile solvents such as toluene. Furthermore, the CuI/1,10‐phenanthroline catalytic system can be reused up to eight times without loss of activity and efficiency. Copyright © 2016 John Wiley & Sons, Ltd.     

Enhancement of Neighbouring‐Group Participation in Cu0‐Promoted Cross‐Coupling gem‐Difluoromethylenation of Aryl/Alkenyl Halides with 1,3‐Azolic Difluoromethyl Bromides

A copper(0)‐promoted direct reductive gem‐difluoromethylenation of unactivated aryl or alkenyl halides with benzo‐1,3‐azolic (oxa‐, thia‐ or aza‐) difluoromethyl bromides or 2‐bromodifluoromethyl‐1,3‐oxazoline has been developed for the construction of pharmaceutically important gem‐difluoromethylene‐linked twin molecules. The unique π‐conjugated aryl‐fused 1,3‐azolic moiety in difluoromethyl bromide substrates could stabilise the reaction intermediates, which promotes the reactivities, providing facile access to the cross‐coupling products in good to excellent yields, and allowing significant functional group tolerance. The reaction exhibits an enhanced neighbouring‐group‐participation effect. This method could provide a new strategy for the construction of gem‐difluoromethylene‐linked identical or nonidentical twin drugs through further functionalisation of 1,3‐azolic skeletons.     

Air‐stable and recoverable catalyst for copper‐catalyzed controlled/living radical polymerization of styrene; In situ generation of Cu(I) species via electron transfer reaction

Copper‐catalyzed controlled/living radical polymerization (LRP) of styrene (St) was conducted using the silica gel‐supported CuCl₂/N,N,N′,N′,N″‐pentamethyldiethylenetriamine (SG‐CuCl₂/PMDETA) complex as catalyst at 110 °C in the presence of a definite amount of air. This novel approach is based on in situ generation and regeneration of Cu(I) via electron transfer reaction between phenols and Cu(II). Sodium phenoxide or p‐methoxyphenol was used as a reducing agent of Cu(II) complexes in LRP. The number–average molecular weight, M_n,GPC, increases linearly with monomer conversion and agrees well with the theoretical values up to 85% conversion The molecular weight distribution, M_w/M_n, decreases as the conversion increases and reaches values below 1.2. The catalyst was recovered in aerobic condition and reused in copper‐catalyzed LRP of St. For the second run, the number–average molecular weights increased with monomer conversion and the polydispersities decreased as the polymerization proceeded and reached to the value <1.3 at 81% conversion. The recycled catalyst retained 90% of its original activity in the subsequent polymerization. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 77–87, 2006     

Prediction of solvent diffusion coefficient in amorphous polymers based on an equation‐of‐state

This study develops a modified free‐volume model to predict solvent diffusion coefficients in amorphous polymers by combining the Vrentas–Duda model with the Simha–Somcynsky (S‐S) equation‐of‐state (EOS), and all the original parameters can be used in the modified model. The free volume of the polymer is estimated from the S‐S EOS together with the Williams‐Landel‐Ferry fractional free volume, and the complex process of determining polymer free‐volume parameters in the Vrentas–Duda model and measuring polymer viscoelasticity can be avoided. Moreover, the modified model includes the influence of not only temperature but also pressure on solvent diffusivity. Three common polymers and four solvents are employed to demonstrate the predictions of the modified model. The calculation results are generally consistent with the experimental values. It is reasonable to expect that the modified free‐volume model will become a useful tool in polymer process development. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1000–1009, 2006     

Localization/Delocalization of Charges in Bay‐Linked Perylene Bisimides

The copper‐mediated Ullmann coupling of 1,7‐dibromoperylene bisimides afforded structurally perfect singly‐linked perylene bisimide (PBI) arrays, whilst the homo‐coupling of 1,12‐dibromoperylene bisimides gave doubly‐linked and triply‐linked diperylene bisimides. The interactions of three bay‐linked diperylene bisimides that differed in their linkage (singly, doubly, and triply) were investigated in their neutral and reduced forms (mono‐anion to tetra‐anion). UV/Vis absorption and fluorescence spectroscopy revealed different degrees of interaction, which was explained by exciton coupling and conjugation effects. The electrochemical properties and spectroelectrochemistry also showed quite‐different degrees of PBI interactions in the reduced mixed‐valence species, which was apparent by the observation of CT bands. The interpretation of the experimental findings was supported by spin‐restricted and ‐unrestricted DFT and time‐dependent TD‐DFT calculations with the long‐range‐corrected CAM‐B3LYP functional. Accordingly, the degree of interaction in both the neutral and reduced forms of the bay‐linked PBIs was qualitatively in the order doubly linked<singly linked?triply linked, owing to the different degrees of twisting and flexibility between the two PBIs moieties. Only triply linked diPBI showed completely delocalized wavefunctions over the entire π‐system.     

Preparation and characterization of copper chloride supported on citric acid‐modified magnetite nanoparticles (Cu2+‐CA@Fe3O4) and evaluation of its catalytic activity in the reduction of nitroarene compounds

A new, powerful and recyclable copper catalyst were prepared by heterogenization of copper chloride using of Fe₃O₄ nano particles modified with citric acid as a linker. This system can catalyze reduction of nitroaren compound to aniline derivatives in the presence of Sodium borohydride as a reduction agent in moderate to good yields. In addition, easy separation and recoverable with an external permanent magnet is the dominant properties of this catalyst (Cu²⁺‐CA@Fe₃O₄).     

Monte‐Carlo simulation of spatial distribution of characteristic x‐rays in multi‐film targets: source size of Al Kα x‐rays in W/Al film targets

A Monte‐Carlo simulation approach has been applied to describe the spatial distribution of characteristic x‐rays in W/Al film targets of different combinations of film thicknesses for the optimal design of a small‐sized x‐ray source having a high x‐ray intensity. The result has led to optimal combinations of W and Al film targets for 100 kV electrons, e.g. W(1 µm)/Al(20 µm), W(3 µm)/Al(15 µm) and W(5 µm)/Al(8 µm). These Al/W targets could be used as x‐ray sources for a medical instrument currently under development. Copyright © 2004 John Wiley & Sons, Ltd.     

Synthesis of unsaturation containing P(VDF‐co‐TrFE‐co‐CTFE) from P(VDF‐co‐CTFE) in one‐pot catalyzed with Cu(0)‐based single electron transfer living radical polymerization system

Poly(vinylidene fluoride‐co‐trifluoroethylene‐co‐chlorotrifluoroethylene) (P(VDF‐co‐TrFE‐co‐CTFE)) with internal double bond has been reported with high dielectric constant and energy density at room temperature, which is expected to serve as a promising dielectric film in high pulse discharge capacitors. An environmentally friendly one‐pot route, including the controllable hydrogenation via Cu(0) mediated single electron transfer radical chain transfer reaction (SET‐CTR) and dehydrochlorination catalyzed with N‐containing reagent, is successfully developed to synthesize P(VDF‐co‐TrFE‐co‐CTFE) containing unsaturation. The resultant polymer was carefully characterized with ¹H NMR, ¹⁹F NMR, and FTIR. The composition of the resultant copolymer is strongly influenced by reaction conditions, including the reaction temperature, catalyst concentration, the types of ligands and solvents. The kinetics data of the chain transfer and elimination reaction demonstrate their well‐controlled feature of the strategy. By shifting the equilibrium between the CTR and elimination reactions dominated by N‐compounds serving as ligands in SET‐CTR and catalyst in the dehydrochlorination of P(VDF‐co‐CTFE), P(VDF‐co‐TrFE‐co‐CTFE) with tunable TrFE and double‐bond content could be synthesized in this one‐pot route. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3429–3440     

Asymmetric Henry reaction catalysed by L‐proline derivatives in the presence of Cu(OAc)2: isolation and characterization of an in situ formed Cu(II) complex

Synthesis of asymmetric β‐nitroalcohols by the Henry reaction is one of the most exploited carbon–carbon bond‐forming reactions owing to the versatility of both functional groups for synthetic manipulation by functional group interconversion. Here we report synthesis of a series of proline‐derived compounds to study their catalytic activities for asymmetric Henry reaction in the presence of Cu(OAc)₂.H₂O. The proline derivative, 2‐((E)‐(((S)‐1‐benzylpyrrolidinyl)diphenylmethylimino)methyl)phenol 1 showed optimum catalytic activity. The catalytic species Cu(II)–1 complex, formed in situ, was isolated and characterized by various spectroscopic techniques and X‐ray crystallography to show a cis‐N₂O₂ coordination geometry. Asymmetric β‐nitroalcohols were achieved without the use of added base, unlike most of the reported protocols. Copyright © 2014 John Wiley & Sons, Ltd.     

ChemInform Abstract: Coordination of Cu+ and Cu2+ Ions in ZSM‐5 in the Vicinity of Two Framework Al Atoms.

ChemInform is a weekly Abstracting Service, delivering concise information at a glance that was extracted from about 100 leading journals. To access a ChemInform Abstract of an article which was published elsewhere, please select a “Full Text” option. The original article is trackable via the “References” option.     

Thiophenol derivatives as a reducing agent for in situ generation of Cu(I) species via electron transfer reaction in copper‐catalyzed living/controlled radical polymerization of styrene

The copper‐catalyzed living radical polymerization (LRP) of styrene (St) was carried out in the presence of thiophenol derivative such as sodium thiophenolate (PhSNa) or p‐methoxythiophenol as a reducing agent for Cu(II) by using either 1‐chloro‐1‐phenyl ethane or ethyl‐2‐bromoisobutyrate as an initiator and N,N,N′,N″,N″‐pentamethyldiethylenetriamine as ligand at 110 °C. Kinetic experiments were carried out to reveal the effect of PhSNa concentration on copper‐catalyzed LRP of St. This technique was successfully applied for the preparation of both chain‐extended polymer and block copolymer polystyrene‐b‐poly(methyl methacrylate). The obtained polymers were characterized using GPC, ¹H‐NMR, and MALDI‐TOF measurements. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5923–5932, 2006