Desorption electrospray ionization tissue imaging using heated nebulizing gas and high‐resolution accurate mass spectra

A new method for tissue imaging using desorption electrospray ionization (DESI) mass spectrometry is described. The technique utilizes a DESI source with a heated nebulizing gas and high‐resolution accurate mass data acquired with an LTQ‐Orbitrap mass spectrometer. The two‐dimensional (2D) automated DESI ion source creates images using the ions that are collected under high‐resolution conditions. The use of high‐resolution mass detection significantly improves the image quality due to exclusion of interfering ions. The use of a heated nebulizing gas increases the signal intensity observed at lower gas pressure. The technique developed is highly compatible with soft tissue imaging due to the minimal surface destruction. Copyright © 2010 John Wiley & Sons, Ltd.     

On the high‐resolution mass analysis of the product ions in tandem time‐of‐flight (TOF/TOF) mass spectrometers using a time‐dependent re‐acceleration technique

The time‐dependent reacceleration of product ions produced as a result of dissociation of a single precursor ion in a tandem time‐of‐flight mass spectrometer is considered for the first time. Analytical expressions for the shapes of electric pulses bringing all the kinetic energies of the product ions to the same value are derived for two cases: forward acceleration mode and deceleration, followed by re‐acceleration in the reversed direction (reversed mode). Secondary time‐of‐flight focusing resulting from the re‐acceleration in the reversed mode is shown to be mass‐dependent and, when averaged over a wide mass range, the focusing is tight enough to provide mass resolution exceeding 10 000. After time‐dependent re‐acceleration, additional compression of the ion packet width leading to better mass resolution can be obtained by decelerating the ions in a constant field. Copyright © 2009 John Wiley & Sons, Ltd.     

Automated assignment of high‐resolution collisionally activated dissociation mass spectra using a systematic bond disconnection approach

An essential component of the process of characterising chemical unknowns via mass spectrometry is the analysis of collisionally activated dissociation (CAD) mass spectra. Existing tools for the automated assignment of CAD spectra typically use a rule‐based approach which identifies those bonds that are likely to break. While valuable, the failure of explicitly rule‐based approaches to suggest rationalisations for a significant proportion of observed product ions led us to develop an alternative approach (elucidation of product ion connectivity, EPIC) based on high‐resolution mass spectrometry, systematic bond disconnection of the precursor structure, and ranking of the resulting substructures. We exemplify this approach with a reanalysis of published MS/MS data for two compounds taken from the literature. Copyright © 2005 John Wiley & Sons, Ltd.     

Screening for pharmaco‐toxicologically relevant compounds in biosamples using high‐resolution mass spectrometry: a ‘metabolomic’ approach to the discrimination between isomers

High‐resolution mass spectrometry (HRMS) enables the identification of a chemical formula of small molecules through the accurate measurement of mass and isotopic pattern. However, the identification of an unknown compound starting from the chemical formula requires additional tools: (1) a database associating chemical formulas to compound names and (2) a way to discriminate between isomers. The aim of this present study is to evaluate the ability of a novel ‘metabolomic’ approach to reduce the list of candidates with identical chemical formula. Urine/blood/hair samples collected from real positive cases were submitted to a screening procedure using ESI‐MS‐TOF (positive‐ion mode) combined with either capillary electrophoresis or reversed phase liquid chromatography (LC). Detected peaks were searched against a Pharmaco/Toxicologically Relevant Compounds database (ca 50 500 compounds and phase I and phase II metabolites) consisting of a subset of PubChem compounds and a list of candidates was retrieved. Then, starting from the mass of unknown, mass shifts corresponding to pre‐defined biotransformations (e.g. demethylation, glucuronidation, etc.) were calculated and corresponding mass chromatograms were extracted from the total ion current (TIC) in order to search for metabolite peaks. For each candidate, the number of different functional groups in the molecule was automatically calculated using E‐Dragon software (Talete srl, Milan, Italy). Then, the presence of metabolites in the TIC was matched with functional groups data in order to exclude candidates with structures not compatible with observed biotransformations (e.g. loss of methyl from a structure not bearing methyls). The procedure was tested on 108 pharmaco‐toxicologically relevant compounds (PTRC) and their phase I metabolites were detected in real positive samples. The mean list length (MLL) of candidates retrieved from the database was 7.01 ± 4.77 (median, 7; range, 1–28) before the application of the ‘metabolomic’ approach, and after the application it was reduced to 4.08 ± 3.11 (median 3, range 1–17). HRMS allows a much broader screening for PTRC than other screening approaches (e.g. library search on mass spectra databases). The ‘metabolomic’ approach enables the reduction of the list of candidate isomers. Copyright © 2009 John Wiley & Sons, Ltd.     

Benzylisoquinoline alkaloid analysis using high‐resolution Orbitrap LC‐MSn

Benzylisoquinoline alkaloids (BIAs) have profound implications on human health owing to their potent pharmacological properties. Notable naturally occurring BIAs are the narcotic analgesics morphine, the cough suppressant codeine, the potential anticancer drug noscapine, the muscle relaxant papaverine, and the antimicrobial sanguinarine, all of which are produced in opium poppy (Papaver somniferum). Thebaine, an intermediate in the biosynthesis of codeine and morphine, is used in the manufacture of semisynthetic opiates, including oxycodone and naloxone. As the only commercial source of pharmaceutical opiates, opium poppy has been the focus of considerable research to understand BIA metabolism in the plant. The elucidation of several BIA biosynthetic pathways has enabled the development of synthetic biology platforms aimed at the alternative commercial production of valuable phytochemicals in microorganisms. The detection and identification of BIA pathway products and intermediates in complex extracts is essential for the continuing advancement of research in plant specialized metabolism and microbial synthetic biology. Herein, we report the use of liquid chromatography coupled with linear trap quadrupole and high‐resolution Orbitrap multistage mass spectrometry to characterize 44 authentic BIAs using collision‐induced dissociation (CID), higher‐energy collisional dissociation (HCD), and pulsed Q collision‐induced dissociation (PQD) MS² fragmentation, with MS² CID followed by MS³ and MS⁴ fragmentation. Our deep library of diagnostic spectral data constitutes a valuable resource for BIAs identification. In addition, we identified 22 BIAs in opium poppy latex and roots extracts.     

Pharmacokinetic and tissue distribution studies of cassane diterpenoids,in rats through an ultra‐high‐performance liquid chromatography–Q exactive hybrid quadrupole–Orbitrap high‐resolution accurate mass spectrometry

Cassane diterpenoids (CA) are considered as the main active constituents of medicinal plants belonging to the Caesalpinia genus. Three cassane derivatives, bonducellpin G (BG), 7‐O‐acetyl‐bonducellpin C (7‐O‐AC) and caesalmin E (CE), isolated from Caesalpinia minax Hance seeds, showed strong anti‐inflammatory activity. In this paper, pharmacokinetics (BG, 7‐O‐AC, CE) and tissue distribution (7‐O‐AC, CE) properties were studied for the first time using a reliable, sensitive and rapid UHPLC–Q‐Orbitrap HR‐MS to develop new anti‐inflammatory agents. A novel quantitative method with full scan in positive ion mode was used to determine the contents of compounds. They were separated using acetonitrile–water (0.1% formic acid) as gradient mobile phase. The calibration curve displayed good linearity and the lower limit of quantitation was 0.005–0.02 μg/mL for all analytes. Meanwhile, the absorption, distribution, metabolism, excretion (ADME) property was predicted using PreADMET web. The pharmacokinetic parameters indicated that they were absorbed quickly, eliminated rapidly together with high blood concentration. The results of tissue distribution demonstrated that CE was distributed rapidly and widely among tissues, and stomach was the main tissue site of CE and 7‐O‐AC, followed by small intestine/liver. This study indicates that the structures and dosages of active CA should be modified to help improve the absorption rate and residence time, and the findings are helpful for the pharmaceutical design of CA derivatives.     

Accurate identification of dimers from α‐pinene oxidation using high‐resolution collision‐induced dissociation mass spectrometry

Interest in mass spectrometry of highly oxidized dimers from α‐pinene oxidation has increased in the atmospheric chemistry field. Here, we apply high‐resolution collision‐induced dissociation mass spectrometry (HR‐CID‐MS) with an atmospheric pressure ionization source to investigate in detail how α‐pinene‐derived dimers are detected and identified by MS. The resulting HR‐CID spectra and specific fragmentation patterns suggest that a large fraction of dimer ions detected in full‐scan mass spectra can be hydrogen‐bonded artifact clusters and the residual small fraction includes covalently bonded actual dimers. We also show how individual fractions of the artifact clusters and actual dimers are calculated using the HR‐CID spectra.