Facile Chan‐Lam coupling using ferrocene tethered N‐heterocyclic carbene‐copper complex anchored on graphene

Ferrocene tethered N‐heterocyclic carbene‐copper complex anchored on graphene ([GrFemImi]NHC@Cu complex) has been synthesized by covalent grafting of ferrocenyl ionic liquid in the matrix of graphene followed by metallation with copper (I) iodide. The [GrFemImi]NHC@Cu complex has been characterized by fourier transform infrared (FT‐IR), fourier transform Raman (FT‐Raman), CP‐MAS ¹³C NMR spectroscopy, transmission electron microscopy (TEM), thermogravimetric analysis (TGA), energy dispersive X‐ray (EDX) analysis, X‐ray photoelectron spectroscopy (XPS), Brunauer–Emmett–Teller (BET) surface area analysis and X‐ray diffractometer (XRD) analysis. This novel complex served as a robust heterogeneous catalyst for the synthesis of bioactive N‐aryl sulfonamides from variety of aryl boronic acids and sulfonyl azides in ethanol by Chan‐Lam coupling. Recyclability experiments were executed successfully for six consecutive runs.     

Anchoring of Cu(II)–vanillin Schiff base complex on MCM‐41: A highly efficient and recyclable catalyst for synthesis of sulfides and 5‐substituted 1H–tetrazoles and oxidation of sulfides to sulfoxides

A copper(II)–vanillin complex was immobilized onto MCM‐41 nanostructure and was used as an inexpensive, non‐toxic and heterogeneous catalyst in the synthesis of symmetric aryl sulfides by the cross‐coupling of aromatic halides with S₈ as an effective sulfur source, in the oxidation of sulfides to sulfoxides using 30% H₂O₂ as a green oxidant and in the synthesis of 5‐substituted 1H –tetrazoles from a smooth (3 + 2) cycloaddition of organic nitriles with sodium azide (NaN₃). The products were obtained in good to excellent yields. This catalyst could be reused several times without loss of activity. Characterization of the catalyst was performed using Fourier transform infrared, energy‐dispersive X‐ray and atomic absorption spectroscopies, X‐ray diffraction, thermogravimetric analysis, and scanning and transmission electron microscopies.     

Application of the Fe3O4@1,10‐phenanthroline‐5,6‐diol@Mn nano‐catalyst for the green synthesis of tetrazoles and its biological performance

The Fe₃O₄ magnetic particles were modified with 1,10‐phenanthroline‐5,6‐diol (Phen) and the related Mn complex (Fe₃O₄@Phen@Mn) synthesized as a heterogeneous catalyst to be used for the one‐pot three‐component synthesis of various tetrazoles. The catalysts were characterized by several methods, such as the elemental analysis, FT‐IR, X‐ray powder diffraction, dispersive X‐ray spectroscopy, scanning electron microscopy, transmission electron microscopy, dynamic light scattering, thermogravimetric‐differential thermal analysis, vibrating sample magnetometer and X‐ray photoelectron spectroscopy. In addition, the antioxidant and antibacterial activities of the catalyst and its Phen ligand were in vitro screened with 2,2‐diphenyl‐1‐picrylhydrazyl by free radical scavenging methods. Results showed that the synthesized compounds possess strong antioxidant activity (IC50; 0.172  ±  0.005 mg ml^?1) as well as a good antibacterial potential in comparison to standards.     

One‐pot synthesis of 1‐ and 5‐substituted 1H‐tetrazoles using 1,4‐dihydroxyanthraquinone–copper(II) supported on superparamagnetic Fe3O4@SiO2 magnetic porous nanospheres as a recyclable catalyst

An effective one‐pot, convenient process for the synthesis of 1‐ and 5‐substituted 1H‐tetrazoles from nitriles and amines is described using1,4‐dihydroxyanthraquinone–copper(II) supported on Fe₃O₄@SiO₂ magnetic porous nanospheres as a novel recyclable catalyst. The application of this catalyst allows the synthesis of a variety of tetrazoles in good to excellent yields. The preparation of the magnetic nanocatalyst with core–shell structure is presented by using nano‐Fe₃O₄ as the core, tetraethoxysilane as the silica source and poly(vinyl alcohol) as the surfactant, and then Fe₃O₄@SiO₂ was coated with 1,4‐dihydroxyanthraquinone–copper(II) nanoparticles. The new catalyst was characterized using Fourier transform infrared spectroscopy, X‐ray diffraction, transmission electron microscopy, field emission scanning electron microscopy, dynamic light scattering, thermogravimetric analysis, vibration sample magnetometry, X‐ray photoelectron spectroscopy, nitrogen adsorption–desorption isotherm analysis and inductively coupled plasma analysis. This new procedure offers several advantages such as short reaction times, excellent yields, operational simplicity, practicability and applicability to various substrates and absence of any tedious workup or purification. In addition, the excellent catalytic performance, thermal stability and separation of the catalyst make it a good heterogeneous system and a useful alternative to other heterogeneous catalysts. Also, the catalyst could be magnetically separated and reused six times without significant loss of catalytic activity. Copyright © 2016 John Wiley & Sons, Ltd.     

Ionic liquid‐functionalized mesoporous silica nanoparticles ([pmim]FeCl4/MSNs): Efficient nanocatalyst for solvent‐free synthesis of N,N′‐diaryl‐substituted formamidines

We report the synthesis of ionic liquid‐functionalized mesoporous silica nanoparticles ([pmim]FeCl₄/MSNs) via a method of post‐grafting on parent MSNs. This hybrid material was characterized using scanning and transmission electron microscopies, energy‐dispersive X‐ray spectroscopy, nitrogen adsorption–desorption analysis, Fourier transform infrared spectroscopy, powder X‐ray diffraction and thermal analyses. The material was utilized as an efficient heterogeneous catalyst for the synthesis of N ,N ′‐diaryl‐substituted formamidines through the reaction of triethyl orthoformate with arylamines under solvent‐free conditions. The catalyst was recovered easily and reused several times without significant loss of its catalytic activity.     

Cu(II) immobilized on Fe3O4–diethylenetriamine: A new magnetically recoverable catalyst for the synthesis of 2,3‐dihydroquinazolin‐4(1H)‐ones and oxidative coupling of thiols

Cu(II) immobilized on Fe₃O₄–diethylenetriamine was designed as a new, inexpensive and efficient heterogeneous catalyst for the synthesis of 2,3‐dihydroquinazolin‐4(1H )‐ones and the oxidative coupling of thiols. The structure of the nanomagnetic catalyst was comprehensively characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, vibrating sample magnetometry, thermogravimetric analysis, X‐ray diffraction and atomic absorption spectroscopy. Simple preparation of the catalyst from commercially available materials, high catalytic activity, simple operation, high yields, use of green solvents, easy magnetic separation and reusability of the catalyst with unaltered activity make our protocol a green and feasible synthetic strategy.     

Pd‐SBT@MCM‐41: As an efficient,stable and recyclable organometallic catalyst for C‐C coupling reactions and synthesis of 5‐substituted tetrazoles

A palladium S‐benzylisothiourea complex was anchored on functionalized MCM‐41 (Pd‐SBT@MCM‐41) and applied as efficient and reusable catalyst for the synthesis of 5‐substituted 1H –tetrazoles using [2 + 3] cycloaddition reaction of various organic nitriles with sodium azide (NaN₃) in poly(ethylene glycol) (PEG) as green solvent. Also this catalyst was applied as an versatile organometallic catalyst for Suzuki cross‐coupling reaction of aryl halides and phenylboronic acid (PhB(OH)₂) or sodium tetraphenyl borate (NaB(Ph)₄). This nanocatalyst was characterized by thermal gravimetric analysis (TGA), X‐ray Diffraction (XRD), scanning electron microscopy (SEM), inductively Coupled Plasma (ICP) and N₂ adsorption–desorption isotherms techniques. Recovery of the catalyst is easily achieved by centrifugation for several consecutive runs.     

Inorganic–Organic Heteropolyacid–Gold(I) Hybrids: Structures and Catalytic Applications

Gold(I)‐polyoxometalate hybrid complexes 1 – 4 ([PPh₃AuMeCN]_xH_4?xSiW₁₂O₄₀, x=1–4) were synthesized and characterized. The structure of the primary gold(I)–polyoxometalate 1 (x=1) was fully ascertained by XRD, FTIR, ³¹P and ²⁹Si magic‐angle spinning (MAS) NMR, mass spectroscopy, and SEM–energy dispersive X‐ray spectroscopy (EDX) techniques. Moreover, this complex exhibited better catalytic activity and selectivity compared with standard, homogeneous, gold catalysts in the new rearrangement of propargylic gem‐diesters.     

Polysiloxane microspheres functionalized with imidazole groups as a palladium catalyst support

Polysiloxane microspheres containing a large number of silanol groups were obtained by an emulsion process of modified polyhydromethylsiloxane. N‐substituted imidazole groups were grafted on these microspheres by the silylation of their silanol groups with N‐[γ‐(dimethylchlorosilyl)propyl]imidazole hydrochloride. The progress of the reaction was monitored using ²⁹Si and ¹³C magic angle spinning (MAS) NMR and its impact on microsphere morphology was studied using scanning electron microscopy (SEM). The usefulness of the imidazole‐functionalized microspheres as a support for a metal catalyst was demonstrated by their reaction with PdCl₂(PhCN)₂. In this way a new heterogenized catalyst, Pd(II) complex with imidazole ligands supported on polysiloxane microspheres, was generated. This catalyst, MPd , was characterized using ¹³C and ²⁹Si MAS NMR, X‐ray photoelectron, Fourier transform infrared and far‐infrared spectroscopies, X‐ray diffraction, SEM–energy‐dispersive X‐ray spectroscopy and wide‐angle X‐ray scattering. The catalyst appears in two structures, as Pd(II) complex and Pd(0) nanoclusters. Its catalytic activity was tested using a model reaction, the hydrogenation of cinnamaldehyde, and compared with that of an analogous complex operating in a homogeneous system. MPd showed a high activity in the promotion of hydrogenation of cinnamaldehyde. The activity in the substrate conversion was stable at least in five cycles of this reaction. The main product was hydrocinnamaldehyde which could be obtained with a yield above 70%. A mechanism of the reaction is proposed. Copyright © 2016 John Wiley & Sons, Ltd.     

Mn‐[4‐Chlorophenyl‐Salicylaldimine‐Methylpyranopyrazole]Cl2 as a Novel Nanostructured Schiff Base Complex and Catalyst

Mn‐[4‐chlorophenyl‐salicylaldimine‐methylpyranopyrazole]Cl₂ ([Mn‐4CSMP ]Cl₂) as nano‐Schiff base complex was prepared and fully characterized by Fourier transform infrared spectroscopy, X‐ray diffraction, thermal gravimetric analysis, derivative thermogravimetry, scanning electron microscopy, energy‐dispersive X‐ray analysis, and UV–vis spectroscopy. The reactivity of nano‐[Mn‐4CSMP ]Cl₂ as a catalyst was tested on the tandem cyclocondensation–Knoevenagel condensation–Michael reaction between phenylhydrazine and ethyl acetoacetate with various aromatic aldehydes to give 4,4′‐(arylmethylene)‐bis‐(3‐methyl‐1‐phenyl‐1H ‐pyrazol‐5‐ol)s derivatives.     

Chloromethylated polystyrene supported copper (II) bis–thiazole complex: Preparation,characterization and its application as a heterogeneous catalyst for chemoselective and homoselective synthesis of aryl azides

This work deals the synthesis of aryl azides catalyzed by heterogeneous copper (II) complex of 3,5–bis (2–benzothiazolyl) pyridine, [Cu (II)(BTP)(OTf)₂], immobilized on chloromethylated polystyrene, [Cu (II)(BTP)(OTf)₂]@CMP. The prepared catalyst was characterized by different analytical techniques such as X‐ray diffraction (XRD), thermogravimetric analysis (TGA), field emission scanning electron microscopy (SEM), energy dispersive X–ray spectroscopy (EDX), elemental analysis, and FT‐IR and UV–Vis spectroscopic methods. This catalytic system showed excellent activity in the synthesis of aryl azides by the reaction of aryl halides with sodium azide in the presence of catalytic amounts of [Cu (II)(BTP)(OTf)₂]@CMP. Moreover, this unique catalyst could be recovered easily and reused several times without any considerable loss of its catalytic activity.     

N‐heterocyclic carbene–palladium(II) complex supported on magnetic mesoporous silica for Heck cross‐coupling reaction

Magnetic mesoporous silica was prepared via embedding magnetite nanoparticles between channels of mesoporous silica (SBA‐15). The prepared composite (Fe₃O₄@SiO₂‐SBA) was then reacted with 3‐chloropropyltriethoxysilane, sodium imidazolide and 2‐bromopyridine to give 3‐(pyridin‐2‐yl)‐1H‐imidazol‐3‐iumpropyl‐functionalized Fe₃O₄@SiO₂‐SBA as a supported pincer ligand for Pd(II). The functionalized magnetic mesoporous silica was further reacted with [PdCl₂(SMe₂)₂] to produce a supported N‐heterocyclic carbene–Pd(II) complex. The obtained catalyst was characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, energy‐dispersive X‐ray analysis, vibrating sample magnetometry, Brunauer–Emmett–Teller surface area measurement and X‐ray diffraction. The amount of the loaded complex was 80.3 mg g^?1, as calculated through thermogravimetric analysis. The formation of the ordered mesoporous structure of SBA‐15 was confirmed using low‐angle X‐ray diffraction and transmission electron microscopy. Also, X‐ray photoelectron spectroscopy confirmed the presence of the Pd(II) complex on the magnetic support. The prepared magnetic catalyst was then effectively used in the coupling reaction of olefins with aryl halides, i.e. the Heck reaction, in the presence of a base. The reaction parameters, such as solvent, base, temperature, amount of catalyst and reactant ratio, were optimized by choosing the coupling reaction of 1‐bromonaphthalene and styrene as a model Heck reaction. N‐Methylpyrrolidone as solvent, 0.25 mol% catalyst, K₂CO₃ as base, reaction temperature of 120°C and ultrasonication of the catalyst for 10 min before use provided the best conditions for the Heck cross‐coupling reaction. The best results were observed for aryl bromides and iodides while aryl chlorides were found to be less reactive. The catalyst exhibited noticeable stability and reusability.     

Simple Ligand Effects Switch a Hydrogenase Mimic between H2 and O2 Activation

Herein, we report a [NiRu] biomimetic system for O₂‐tolerant [NiFe]hydrogenases and demonstrate that electron donation to the [NiRu] center can switch the system between the activation of H₂ and O₂ through simple ligand effects by using hexamethylbenzene and pentamethylcyclopentadienyl ligands, respectively. Furthermore, we present the synthesis and direct observations of a [NiRu]–peroxo species, which was formed by the oxygenation of a Ni‐SIa model [NiRu] complex, that we propose as a biomimetic analogue of O₂‐bound species (OBS) of O₂‐tolerant [NiFe]hydrogenases. The [NiRu]–peroxo complex was fully characterized by X‐ray analysis, X‐ray photoelectron spectroscopy (XPS), mass spectrometry, and ¹H NMR spectroscopy. The OBS analogue was capable of oxidizing p‐hydroquinone and sodium borohydride to turn back into the Ni‐SIa model complex.     

Engineering a Cu‐MOF Nano‐Catalyst by using Post‐Synthetic Modification for the Preparation of 5‐Substituted 1H‐Tetrazoles

A new nano scale Cu‐MOF has been obtained via post‐synthetic metalation by immersing a Zn‐MOF as a template in DMF solutions of copper(II) salts. The Cu‐MOF serves as recyclable nano‐catalyst for the preparation of 5‐substituted 1H‐tetrazoles via [3 + 2] cycloaddition reaction of various nitriles and sodium azide in a green medium (PEG). The post‐synthetic metalated MOF were characterized by FT‐IR spectroscopy, powder X‐ray diffraction (PXRD), atomic absorption spectroscopy (AAS), and energy dispersive X‐ray spectroscopy (EDX) techniques. The morphology and size of the nano‐catalyst were determined by field emission scanning electron microscopy (FE‐SEM).     

Synthesis and characterization of a novel organic–inorganic hybrid salt and its application as a highly effectual Brønsted–Lewis acidic catalyst for the production of N,N′‐alkylidene bisamides

In this research, a novel organic–inorganic hybrid salt, namely, N¹,N¹,N²,N²‐tetramethyl‐N¹,N²‐bis(sulfo)ethane‐1,2‐diaminium tetrachloroferrate ([TMBSED][FeCl₄]₂) was prepared and characterized by Fourier‐transform infrared spectroscopy (FT‐IR), energy‐dispersive X‐ray spectroscopy (EDX), elemental mapping, field emission scanning electron microscopy (FE‐SEM), X‐ray diffraction (XRD), thermal gravimetric (TG), differential thermal gravimetric (DTG), and vibrating‐sample magnetometry (VSM) analyses. Catalytic activity of the hybrid salt was tested for the synthesis of N,N′‐alkylidene bisamides through the reaction of benzamide (2 eq.) and aromatic aldehydes (1 eq.) under solvent‐free conditions in which the products were obtained in high yields and short reaction times. The catalyst was superior to many of the reported catalysts in terms of two or more of these factors: the reaction medium and temperature, yield, time, and turnover frequency (TOF). [TMBSED][FeCl₄]₂ is a Brønsted–Lewis acidic catalyst; there are two SO₃H groups (as Brønsted acidic sites) and two tetrachloroferrate anions (as Lewis acidic sites) in its structure. Highly effectiveness of the catalyst for the synthesis of N,N′‐alkylidene bisamides can be attributed to synergy of the Brønsted and Lewis acids and also possessing two sites of each acid.     

Synthesis and characterization of a novel magnetic nano‐palladium Schiff base complex: application in cross‐coupling reactions

A novel and task‐specific nano‐magnetic Schiff base ligand with phosphate spacer using 2‐aminoethyl dihydrogen phosphate instead of usual coating agents, i.e. tetraethoxysilane and 3‐aminopropyltriethoxysilane, for coating of nano‐magnetic Fe₃O₄ is introduced. The nano‐magnetic Schiff base ligand with phosphate spacer as a novel catalyst was synthesized and fully characterized using infrared spectroscopy, X‐ray diffraction, scanning and transmission electron microscopies, thermogravimetry, derivative thermogravimetry, vibrating sample magnetometry, atomic force microscopy, X‐ray photoelectron spectroscopy and energy‐dispersive X‐ray spectroscopy. The resulting task‐specific nano‐magnetic Schiff base ligand with phosphate spacer was successfully employed as a magnetite Pd nanoparticle‐supported catalyst for Sonogashira and Mizoroki–Heck C–C coupling reactions. To the best of our knowledge, this is the first report of the synthesis and applications of magnetic nanoparticles of Fe₃O₄@O₂PO₂(CH₂)₂NH₂ as a suitable spacer for the preparation of a designable Schiff base ligand and its corresponding Pd complex. So the present work can open up a new and promising insight in the course of rational design, synthesis and applications of various task‐specific magnetic nanoparticle complexes. Copyright © 2016 John Wiley & Sons, Ltd.     

Zn3(BTC)2 as a Highly Efficient Reusable Catalyst for the Synthesis of 2‐Aryl‐1H‐Benzimidazole

Zn₃(BTC)₂ metal‐organic frameworks as recyclable and heterogeneous catalysts were effectively used to catalyze the synthesis of benzimidazole derivatives from o‐phenylendiamine and aldehydes in ethanol. This method provides 2‐aryl‐1H‐benzimidazoles in good to excellent yields with little catalyst loading. The catalyst was characterized using different techniques such as X‐ray diffraction (XRD), energy dispersive X‐ray (EDX) analysis, scanning electron microscopy (SEM), and Fourier transform infrared (FT‐IR) spectroscopy.     

Oxidation of alkenes catalysed by molybdenum(VI)–oxodiperoxo complex anchored on the surface of magnetic nanoparticles under solvent‐free conditions

A new epoxidation catalyst has been prepared by grafting a molybdenum(VI)–oxodiperoxo complex containing an oxazine ligand, [MoO(O₂)₂(phox)], on chloro‐functionalized Fe₃O₄ nanoparticles. The synthesized heterogeneous catalyst (MoO(O₂)₂(phox)/Fe₃O₄ was characterized using powder X‐ray diffraction, scanning and transmission electron microscopies, vibrating sample magnetometry, energy‐dispersive X‐ray analysis, Fourier transform infrared spectroscopy and inductively coupled plasma atomic emission spectroscopy. The immobilized complex gave high product yields and high selectivity for epoxide compared to the corresponding homogeneous one in the epoxidation of various olefins in the presence of tert ‐butyl hydroperoxide at 95°C without any co‐solvent. Also, the heterogeneous catalyst can be recycled without a noticeable change in activity and selectivity.     

Synthesis new Co–Mn mixed oxide catalyst for the production of light olefins by tuning the catalyst structure

In order to increase the catalyst activity for Fischer–Tropsch synthesis (FTS), the preparation methods of two new catalysts were studied. The chemically identical bimetallic Co–Mn/Al₂O₃ catalysts were synthesized by different synthetic methods: (a) via thermal decomposition of the complex [Co_1.33Mn_0.667(C₇H₃NO₄)₂(H₂O)₅].2H₂O ( 1 ) and (b) by the impregnation technique. The complex was characterized by the single‐crystal analysis, elemental analysis, and Fourier‐transform infrared (FT‐IR) spectroscopy. Both catalysts were characterized by powder X‐ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersive X‐ray spectrometry (EDS), Brunauer–Emmett–Teller (BET) specific surface area, hydrogen temperature‐programmed reduction (H₂‐TPR), and H₂‐chemisorption. The catalysts' activity was investigated for the Fischer–Tropsch synthesis in a fixed bed microreactor. Higher activity was obtained for the catalyst prepared by thermal decomposition of the inorganic precursor due to its small particle size, superior dispersion, and higher surface area. The results show that the catalyst prepared thermal decomposition has 21% ethylene, 10% propylene, and 50% C₅⁺ selectivity, while methane selectivity of this catalyst is 11% at 250°C. On the other hand, the catalyst obtained by the impregnation method displays 15% ethylene, 8% propylene, 29% C₅⁺_, and 29% methane selectivity at the same temperature.     

Cationic nitrile‐functionalized Ag(I)‐ and Hg(II)‐N‐heterocyclic carbene complexes of CCC,CNC, and NCN pincer‐type carbene ligands: Synthesis,crystal structures,and characterization

Three nitrile‐functionalized (benz)imid‐ zaolium derivatives with CCC, CNC, and NCN coordination pockets have been synthesized and isolated as the bromide salts and are converted into their hexafluorophosphate counterparts ( 5–7 ) by ligand metathesis. N‐heterocyclic carbene Ag(I)‐ and Hg(II)‐complexes ( 8–10 and 11–13 ) are readily formed in good to excellent yields from ligand precursors 5–7 and Ag₂O and Hg(OAc)₂, respectively. All reported compounds have been characterized by various spectral and analytical techniques, such as FTIR, ¹H, and ¹³C NMR spectroscopy and X‐ray diffraction studies. Solid‐state structures of carbene precursors 5 , 7 , and an Ag(I)–carbene complex 10 have been determined crystallographically. Single crystal X‐ray crystallography of complex 10 reveals the chelation of carbene carbons to metal center in almost a linear manner. © 2012 Wiley Periodicals, Inc. Heteroatom Chem 23:486–497, 2012; View this article online at wileyonlinelibrary.com . DOI 10.1002/hc.21041