Pd@tetrahedral hollow magnetic nanoparticles coated with N‐doped porous carbon as an efficient catalyst for hydrogenation of nitroarenes

Hollow magnetic nanoparticles (MNPs) with tetrahedral morphology were synthesized and then covered by a shell prepared by coating with melamine–formaldehyde followed by the introduction of glucose‐derived carbon. Subsequently, Pd nanoparticles were immobilized and the core–shell nanocomposite was carbonized. The obtained magnetic catalyst was successfully applied for the hydrogenation of nitroarenes in aqueous media. To investigate the effects of the morphology of MNPs, the nature of carbon shell, and the order of incorporation of Pd nanoparticles, several control catalysts, including the MNPs with different morphologies (disc‐like and cylinder); MNPs coated with different shells (sole glucose‐derived carbon or melamine–formaldehyde carbon shell); and a nanocomposite, in which Pd was immobilized after carbonization, were prepared and examined as catalyst for the model reaction. To justify the observed different catalytic activities of the catalysts, their Pd loadings, leaching, and specific surface areas were compared. The results confirmed that tetrahedral MNPs coated with porous N‐rich carbon shell exhibited the best catalytic activity. The high catalytic activity of this catalyst was attributed to its high surface area and the interaction of N‐rich shell with Pd nanoparticles that led to the higher Pd loading and suppressed Pd leaching.     

A highly reactive and magnetic recyclable catalyst based on silver nanoparticles supported on ferrite for N‐monoalkylation of amines with alcohols

Fe₃O₄@SiO₂‐Ag catalyst was found to be highly active and selective in the N ‐alkylation of amines with a variety of aromatic and linear alcohols. The heterogeneous nature of the Fe₃O₄@SiO₂‐Ag catalyst allows easy recovery and regeneration by applying an external magnet for six subsequent reaction cycles. The prepared catalyst was characterized using electron microscopy techniques, X‐ray diffraction, vibrating sample magnetometry and atomic absorption spectroscopy.     

Nitrogen‐doped mesoporous carbon materials for oxidative dehydrogenation of propane

The CN‐15‐x series materials with different doses of SBA‐15 template and the CN‐y‐2.0 series materials with different hard templates were prepared by the hard template method with hexamethylenetetramine as the carbon and nitrogen source. The obtained mesoporous carbon materials were characterized by X‐ray diffraction (XRD), N₂ adsorption–desorption, transmission electron microscopy (TEM), Raman spectroscopy, and X‐ray photoelectron spectroscopy (XPS). The catalytic performance of propane oxidative dehydrogenation was determined. The characterization results indicate that the catalytic activity of CN‐15‐2.0 with a bipartite hexagonal ordered structure was higher than those of the other materials. The conversion of propane was 22.98%, and the selectivity toward propylene was 41.70%.     

Magnetic porous carbon derived from Co‐doped metal–organic frameworks for the magnetic solid‐phase extraction of endocrine disrupting chemicals

Metal–organic frameworks‐5 (MOF‐5) was explored as a template to prepare porous carbon due to its high surface area, large pore volume, and permanent nanoscale porosity. Magnetic porous carbon, Co@MOF‐5‐C, was fabricated by the one‐step direct carbonization of Co‐doped MOF‐5. After carbonization, the magnetic cobalt nanoparticles are well dispersed in the porous carbon matrix, and Co@MOF‐5‐C displays strong magnetism (with the saturation magnetization intensity of 70.17emu/g), high‐specific surface area, and large pore volume. To evaluate its extraction performance, the Co@MOF‐5‐C was applied as an adsorbent for the magnetic solid‐phase extraction of endocrine disrupting chemicals, followed by their analysis with high‐performance liquid chromatography. The developed method exhibits a good linear response in the range of 0.5–100 ng/mL for pond water and 1.0–100 ng/mL for juice samples. The limits of detection (S/N  = 3) for the analytes were in the range of 0.1–0.2 ng/mL.     

One‐pot synthesis of carbon dots@ZrO2 nanoparticles with tunable solid‐state fluorescence

In recent years, fluorescent carbon dots (CDs) have been developed and showed potential applications in biomedical imaging and light‐emitting diodes (LEDs) for their excellent fluorescent properties. However, it still remains a challenge to incorporate fluorescent CDs into the host matrix in situ to overcome their serious self‐quenching. Herein, a one‐pot hydrothermal method is used to prepare nano‐zirconia with CDs (CDs@ZrO₂) nanoparticles. During the reaction, CDs and nano‐zirconia are generated simultaneously and connected with silane coupling agent. The CDs@ZrO₂ nanoparticles exhibit tunable emission wavelength from 450 to 535 nm emission by regulating the content of citric acid in the feed. The quantum yield of the CDs@ZrO₂ is up to 23.8%. Furthermore, the CDs@ZrO₂ nanoparticles with regulable fluorescence emission can be used for the fluorescent material to prepare white LEDs. The prepared LED has significant white light emission with color coordinates of (0.30, 0.37) and its color rendering index (CRI) is 67.1. In summary, we have developed the solid‐state CDs@ZrO₂ nanoparticles with tunable emission by a valuable strategy, that is, one‐pot method, for white LEDs.     

Magnetic Graphene Oxide Anchored Sulfonic Acid as a Novel Nanocatalyst for the Synthesis of N‐aryl‐2‐amino‐1,6‐naphthyridines

Magnetic graphene oxide functionalized with sulfonic acid (Fe₃O₄‐GO‐SO₃H) was used as a new recyclable nanocatalyst for one‐pot synthesis of N‐aryl‐2‐amino‐1,6‐naphthyridine derivatives under solvent free conditions. The catalyst could be easily recovered from the reaction mixture by an external magnet and reused without significant decrease in activity even after 4 runs. This nanocatalyst exhibited better activities to other commercially available sulfonic acid catalysts.     

In situ green synthesis of Cu‐Ni bimetallic nanoparticles supported on reduced graphene oxide as an effective and recyclable catalyst for the synthesis of N‐benzyl‐N‐aryl‐5‐amino‐1H‐tetrazoles

In the present work, for the first time we have designed a novel approach for the synthesis of N‐benzyl‐N‐aryl‐5‐amino‐1H‐tetrazoles using reduced graphene oxide (rGO) decorated with Cu‐Ni bimetallic nanoparticles (NPs). In situ synthesis of Cu/Ni/rGO nanocomposite was performed by a cost efficient, surfactant‐free and environmentally benign method using Crataegus azarolus var. aronia L. leaf extract as a stabilizing and reducing agent. Phytochemicals present in the extract can be used to reduce Cu²⁺ and Ni²⁺ ions and GO to Cu NPs, Ni NPs and rGO, respectively. Analyses by means of FT‐IR, UV–Vis, EDS, TEM, FESEM, XRD and elemental mapping confirmed the Cu/Ni/rGO formation and also FT‐IR, NMR, and mass spectroscopy as well as elemental analysis were used to characterize the tetrazoles. The Cu/Ni/rGO nanocomposite showed the superior catalytic activity for the synthesis of N‐benzyl‐N‐aryl‐5‐amino‐1H‐tetrazoles within a short reaction time and high yields. Furthermore, this protocol eliminates the need to handle HN₃.     

N‐Heterocyclic carbene/phosphite synergistically assisted Pd/C‐catalyzed Suzuki coupling of aryl chlorides

An N‐heterocyclic carbene and phosphite synergistically enhanced Pd/C catalyst system has been developed for Suzuki coupling of aryl chlorides and aryl boronic acids from commercially available Pd/C with sterically demanding N,N′‐bis(2,6‐diisopropylphenyl)imidazolylidene and trimethylphosphite. A remarkable increase in catalytic activity of Pd/C was observed when used along with 1 equiv. N,N′‐bis(2,6‐diisopropylphenyl)imidazolium chloride and 2 equiv. phosphite with respect to palladium in appropriate solvents that were found to play a crucial role in Pd/C‐NHC‐P(OR)₃‐catalyzed Suzuki coupling. A dramatic ortho‐substitution effect of carbonyl and nitrile groups in aryl chlorides was observed and explained by a modified quasi‐heterogeneous catalysis mechanism. The Pd/C catalyst could be easily recovered from reaction mixtures by simple filtration and only low palladium contamination was detected in the biparyl products. A practical process for the synthesis of 4‐biphenylcarbonitrile has therefore been developed using the N‐heterocyclic carbene/phosphite‐assisted Pd/C‐catalyzed Suzuki coupling. Copyright © 2013 John Wiley & Sons, Ltd.     

Gold nanoparticles supported on three‐dimensional nitrogen‐doped graphene: an efficient catalyst for selective aerobic oxidation of hydrocarbons under mild conditions

The development of efficient and selective aerobic oxidation of alkylarenes to form more functional compounds by heterogeneously catalysed routes still presents a great challenge in the fine chemical industry and is a major research topic. In this work, gold nanoparticles supported on three‐dimensional nitrogen‐doped graphene‐based frameworks (Au NPs@3D‐(N)GFs) were successfully synthesized and found to have an impressive performance as bifunctional catalysts (nitrogen dopant as base and gold nanoparticles as active site) in the controlled oxidation of alkylarenes. The catalyst was found to be a simple bench top, stable, recyclable and selective catalytic system for the aerobic oxidation of various types of alkylarenes into their corresponding ketones at room temperature under environmentally friendly conditions with good yields and high selectivity. Copyright © 2015 John Wiley & Sons, Ltd.     

Magnetic N‐doped mesoporous carbon as an adsorbent for the magnetic solid‐phase extraction of phthalate esters from soft drinks

A new kind of magnetic N‐doped mesoporous carbon was prepared by the one‐step carbonization of a hybrid precursor (glucose, melamine, and iron chloride) in a N₂ atmosphere with a eutectic salt (KCl/ZnCl₂) as the porogen. The obtained magnetic N‐doped mesoporous carbon showed excellent characteristics, such as strong magnetic response, high surface area, large pore volume, and abundant π‐electron system, which endow it with a great potential as a magnetic solid‐phase extraction adsorbent. To evaluate its adsorption performance, the magnetic N‐doped mesoporous carbon was used for the extraction of three phthalate esters from soft drink samples followed by high‐performance liquid chromatographic analysis. Under the optimum conditions, the developed method showed a good linearity (1.0–120.0 ng/mL), low limit of detection (0.1–0.3 ng/mL, S/N = 3), and good recoveries (83.2–119.0%) in soft drink samples. The results indicated that the magnetic N‐doped mesoporous carbon has an excellent adsorption capacity for phthalate esters and the present method is simple, accurate, and highly efficient for the extraction and determination of phthalate esters in complex matrix samples.     

Thiol‐functionalized fructose‐derived nanoporous carbon as a support for gold nanoparticles and its application for aerobic oxidation of alcohols in water

Gold nanoparticles supported on thiol‐functionalized fructose‐derived nanoporous carbon (AuNPs@thiol‐Fru‐d‐NPS) were found to be a simple bench‐top, biocompatible, recyclable and selective catalytic system for the aerobic oxidation of various types of alcohols into their corresponding aldehydes and ketones at room temperature under the environmentally friendly conditions with excellent yields. Copyright © 2014 John Wiley & Sons, Ltd.     

Pd embedded N,S co‐doped graphene wrapped core‐shell magnetic nanospheres: Engineered stable nanocatalyst for Suzuki couplings

Designed nitrogen and sulfur co‐doped graphene wrapped magnetic core‐shell supported Pd nanoparticles were synthesized through the following steps. Firstly, Fe₃O₄ was prepared, coated with silica and then functionalized with amine groups to create a positive charge on the structure for enhancing the interaction of the Fe₃O₄@SiO₂ with graphene oxide. Secondary, the pre‐catalyst wrapped with graphene to enhance adsorption of aromatic substrates through π–π stacking. Thirdly, graphene was doped with nitrogen and sulfur to increase the grafting of Pd in hybrid. Finally, Pd NPs were attached on the surface of pre‐engineered structure to produce Fe₃O₄@SiO₂@N,S‐wG@Pd which exhibited high performance in Suzuki reactions. This superior activity can be indexed to the incorporation of N and S atoms into graphene led to high anchoring and well‐dispersion of Pd NPs on the nanocomposite surface offering large amounts of active centers, that strongly increased the interaction between Pd and substrates to decreases Pd leaching.     

Visible‐light‐driven self‐cleaning SERS substrate of silver nanoparticles and graphene oxide decorated nitrogen‐doped titania nanotube array

Graphene oxide (GO) and silver nanoparticles (Ag NPs) sequentially decorated nitrogen‐doped titania nanotube array (N‐TiO₂ NTA) had been designed as visible‐light‐driven self‐cleaning surface‐enhanced Raman scattering (SERS) substrate for a recyclable SERS detection application. N‐TiO₂ NTA was fabricated by anodic oxidation and then doping nitrogen treatment in ammonia atmosphere, acting as a visible‐light‐driven photocatalyst and supporting substrate. Ag/GO/N‐TiO₂ NTA was prepared by decorating GO monolayer through an impregnation process and then depositing Ag NPs through a polyol process on the surface of N‐TiO₂ NTA, acting as the collection of organic molecule and Raman enhancement. The SERS activity of Ag/GO/N‐TiO₂ NTA was evaluated using methyl blue as an organic probe molecule, revealing the analytical enhancement factor of 4.54 × 10⁴. Ag/GO/N‐TiO₂ NTA was applied as active SERS substrate to determine a low‐affinity organic pollutant of bisphenol A, revealing the detection limit of as low as 5 × 10^?7 m . Ag/GO/N‐TiO₂ NTA could also achieve self‐cleaning function for a recycling utilization through visible‐light‐driven photocatalytic degradation of the adsorbed organic molecules. Ag/GO/N‐TiO₂ NTA has been successfully reused for five times without an obvious decay in accuracy and sensitivity for organic molecule detection. The unique properties of this SERS substrate enable it to have a promising application for the sensitive and recyclable SERS detection of low‐affinity organic molecules. Copyright © 2016 John Wiley & Sons, Ltd.     

Elaboration of densely functionalized polylactide nanoparticles from N‐acryloxysuccinimide‐based block copolymers

Poly(N‐acryloxysuccinimide) (PNAS) and poly(N‐acryloxysuccinimide‐co‐N‐vinylpyrrolidone) (P(NAS‐co‐NVP)) of adjustable molecular weights and narrow polydispersities were prepared by nitroxide‐mediated polymerization (NMP) in N,N‐dimethylformamide in the presence of free SG1 (N‐tert‐butyl‐N‐1‐diethylphosphono‐(2,2‐dimethylpropyl) nitroxide), with MAMA‐SG1 (N‐(2‐methylpropyl)‐N‐(1‐diethylphosphono‐2,2‐dimethylpropyl)‐O‐(2‐carboxylprop‐2‐yl)hydroxylamine) alkoxyamine as initiator. The reactivity ratios of NAS and NVP were determined to be r_NAS = 0.12 and r_NVP = 0, indicating a strong alternating tendency for the P(NAS‐co‐NVP) copolymer. NAS/NVP copolymerization was then performed from a SG1‐functionalized poly(D ,L ‐lactide) (PLA‐SG1) macro‐alkoxyamine as initiator, leading to the corresponding PLA‐b‐P(NAS‐co‐NVP) block copolymer, with similar NAS and NVP reactivity ratios as mentioned above. The copolymer was used as a surface modifier for the PLA diafiltration and nanoprecipitation processes to achieve nanoparticles in the range of 450 and 150 nm, respectively. The presence of the functional/hydrophilic P(NAS‐co‐NVP) block, and particularly the N‐succinimidyl (NS) ester moieties at the particle surface, was evidenced by ethanolamine derivatization and zeta potential measurements. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

New bis(N‐heterocyclic carbene) palladium complex immobilized on magnetic nanoparticles: as a magnetic reusable catalyst in Suzuki‐Miyaura cross coupling reaction

A new bis(N ‐heterocyclic carbene) (NHC) palladium complex supported on silica coated magnetic nanoparticles (MNPs) was prepared using the reaction of synthesized Pd‐NHC complex with MNPs. The Pd‐NHC complex was prepared using the reaction of a hydroxyl‐functionalized bis‐imidazolium ionic liquid. The Pd‐NHC organometallic complex was used as a heterogeneous recyclable and active catalyst in the Suzuki‐Miyaura reaction and various aryl halides were coupled with arylboronic acids in order to synthesize diverse biaryls in good to excellent yields. The prepared catalyst was characterized by use of some different microscopic and spectroscopic techniques including elemental analysis, FT‐IR spectroscopy, diffuse reflectance UV–Vis spectrophotometery, scanning electron microscopy (SEM), transmission electron microscopy (TEM), vibrating sample magnetometer (VSM) and X‐ray diffraction (XRD). The Pd‐NHC catalyst system is a magnetic reusable catalyst and it can be separated from the reaction mixture using an external magnetic field. The catalyst was reusable in the Suzuki‐Miyaura coupling reaction at least for 6 times without significant decreasing in its catalytic activity.     

Facilitating a high‐performance photocatalyst for Suzuki reaction: Palladium nanoparticles immobilized on reduced graphene oxide‐doped graphitic carbon nitride

We prepared a non‐covalently coupled hybrid of reduced graphene oxide (rGO)‐doped graphitic carbon nitride (g‐C₃N₄) by freezing‐assisted assembly and calcination. Fourier transform infrared, Raman and X‐ray photoelectron spectroscopies and transmission electron microscopy confirmed that rGO was incorporated into the bulk g‐C₃N₄, which was an ideal support for loading Pd nanoparticles. The Pd nanoparticles with an average size of 4.57 nm were uniformly dispersed on the rGO‐doped g‐C₃N₄ surface. The layered structure provided large contact area of g‐C₃N₄ with rGO, further accelerating the electron transfer rate and inhibiting electron–hole recombination. Consequently, compared with Pd/rGO/g‐C₃N₄ and Pd/g‐C₃N₄, the Pd/rGO‐doped g‐C₃N₄ showed a prominent catalytic activity for visible‐light‐driven photocatalytic Suzuki–Miyaura coupling at ambient temperature. The Pd/rGO‐doped g‐C₃N₄ exhibited very high stability after six consecutive cycles with minimal loss of catalytic activity.     

Carbonylative Suzuki coupling and alkoxycarbonylation of aryl halides using palladium supported on phosphorus‐doped porous organic polymer as an active and robust catalyst

Developing highly active catalysts with the combined advantages of molecular and solid catalysis is considered as the “Holy Grail” in the area of catalysis research. Herein, a phosphorus‐doped porous polymer‐immobilized palladium was successfully developed as an efficient, robust, and recyclable catalyst for the carbonylative Suzuki coupling and alkoxycarbonylation reactions of aryl halides. Rather than just as an immobilizing molecular catalyst, palladium supported on phosphorus‐doped porous organic polymer exhibits even better catalytic performances than that of its analogue homogeneous catalysts in both carbonylation reactions. Moreover, the catalyst can be easily separated and reused for at least 5 times without significant loss in reactivity. Importantly, the catalyst was highly stable under carbonylation reaction conditions, and no palladium nanoparticle was observed even after the 5th reuse.     

Controlled post‐synthesis grafting of thermoresponsive poly(N‐isopropylacrylamide) on mesoporous silica nanoparticles

Ordered mesoporous silica nanoparticles with pore diameter of 5 nm were synthesized by modification of the sol‐gel synthesis method. Post‐synthesis two‐step grafting of thermoresponsive poly(N‐isopropylacrylamide) inside the mesopores of the nanoparticles was carried out by distillation–precipitation polymerization of the methacryloxy‐functionalized mesoporous nanoparticles with N‐isopropylacrylamide monomer. A precise control on the quantity of the grafted polymer was achieved by changing the ratio of monomer to methacryloxy‐functionalized nanoparticles. The polymer‐grafted hybrid nanoparticles obtained were fully characterized by infrared spectroscopy, X‐ray diffraction, dynamic light scattering, transmission electron microscopy, thermal, and gas‐volumetric analyses, which clearly showed presence and thermoresponsive behavior of the polymer inside the mesopores with the preservation of the characteristic mesoporous structure of the nanoparticles. Copyright © 2015 John Wiley & Sons, Ltd.     

CuO nanoparticles supported on three‐dimensional nitrogen‐doped graphene as a promising catalyst for thermal decomposition of ammonium perchlorate

In the present work, CuO nanoparticles grown on three‐dimensional nitrogen‐doped graphene‐based frameworks (CuO@3D‐(N)GFs) were synthesized using a two‐step method. After the synthesis of three‐dimensional nitrogen‐doped graphene, CuO nanoparticles were deposited on it, by adding cupric acetate followed by thermal treatment. Different analysis methods were used to characterize the products. The as‐prepared nanocomposite was used as a promising catalyst for thermal decomposition of ammonium perchlorate (AP) as one of the most common oxidizer in composite propellants. Differential scanning calorimetry (DSC) and thermogravimetry analysis (TGA) techniques were used to investigate the thermal decomposition of ammonium perchlorate. According to the DSC/TGA, high temperature decomposition of AP decreased to 111 °C in the presence of 4% CuO@3D‐(N)GFs and the total heat release (ΔH) from decomposition of AP increased to 1893 J g^?1 which is much more than 590 J g^?1 for pure AP.     

MNPs@SiO2‐Pr‐AP: A new catalyst for the synthesis of 2‐amino‐4‐aryl thiazole derivatives

A simple and efficient synthesis of 2‐amino‐4‐aryl thiazole derivatives was carried out through the reaction of substituted acetophenones and thiourea using three different types of catalytic systems including N,N,N′,N′‐tetrabromobenzene‐1,3‐disulfonamide [TBBDA], poly(N,N′‐dibromo‐N‐ethylbenzene‐1,3‐disulfonamide) [PBBS] and a combination of TBBDA and nano‐magnetic catalyst supported with functionalized 4‐amino‐pyridine silica (MNPs@SiO₂‐Pr‐AP). The results showed that the use of TBBDA along with the MNPs@SiO₂‐Pr‐AP gains the highest yields of the products in the shortest reaction time.