Iron oxide modified with pyridyl‐triazole ligand for stabilization of gold nanoparticles: An efficient heterogeneous catalyst for A3 coupling reaction in water

Fe₃O₄ nanoparticles were modified with pyridyl‐triazole ligand and the new magnetic solid was applied for the stabilization of very small and uniform gold nanoparticles. The resulting magnetic material, Fe₃O₄@PT@Au, was characterized using various methods. These gold nanoparticles on a magnetic support were applied as an efficient heterogeneous catalyst for the three‐component reaction of amines, aldehydes and alkynes (A³ coupling) in neat water with 0.01 mol% Au loading. Using magnetic separation, this catalyst could be recycled for seven consecutive runs with very small decrease in activity. Characterization of the reused catalyst did not show appreciable structural modification.     

Carbon Monoxide Oxidation by Polyoxometalate‐Supported Gold Nanoparticulate Catalysts: Activity,Stability, and Temperature‐ Dependent Activation Properties

Nanoparticulate gold supported on a Keggin‐type polyoxometalate (POM), Cs₄[α‐SiW₁₂O₄₀]⋅n H₂O, was prepared by the sol immobilization method. The size of the gold nanoparticles (NPs) was approximately 2 nm, which was almost the same as the size of the gold colloid precursor. Deposition of gold NPs smaller than 2 nm onto POM (Au/POM) was essential for a high catalytic activity for CO oxidation. The temperature for 50 % CO conversion was −67 °C. The catalyst showed extremely high stability for at least one month at 0 °C with full conversion. The catalytic activity and the reaction mechanism drastically changed at temperatures higher than 40 °C, showing a unique behavior called a U‐shaped curve. It was revealed by IR measurement that Au^δ+ was a CO adsorption site and that adsorbed water promoted CO oxidation for the Au/POM catalyst. This is the first report on CO oxidation utilizing Au/POMs catalysts, and there is a potential for expansion to various gas‐phase reactions.     

Carbon Monoxide Oxidation by Polyoxometalate‐Supported Gold Nanoparticulate Catalysts: Activity,Stability, and Temperature‐ Dependent Activation Properties

Nanoparticulate gold supported on a Keggin‐type polyoxometalate (POM), Cs₄[α‐SiW₁₂O₄₀]?n H₂O, was prepared by the sol immobilization method. The size of the gold nanoparticles (NPs) was approximately 2 nm, which was almost the same as the size of the gold colloid precursor. Deposition of gold NPs smaller than 2 nm onto POM (Au/POM) was essential for a high catalytic activity for CO oxidation. The temperature for 50 % CO conversion was ?67 °C. The catalyst showed extremely high stability for at least one month at 0 °C with full conversion. The catalytic activity and the reaction mechanism drastically changed at temperatures higher than 40 °C, showing a unique behavior called a U‐shaped curve. It was revealed by IR measurement that Au^δ+ was a CO adsorption site and that adsorbed water promoted CO oxidation for the Au/POM catalyst. This is the first report on CO oxidation utilizing Au/POMs catalysts, and there is a potential for expansion to various gas‐phase reactions.     

超声法制备Au/Fe3O4及其催化还原4-硝基苯酚性能

通过简易的超声法以及原位还原法成功制备出了负载型可再生Au/Fe₃O₄催化剂。利用3-氨丙基三乙氧基硅烷（APTES）作为有机桥键,将Au固定在Fe₃O₄的表面,得到单分散磁性Au/Fe₃O₄。Au⁰在氨基的作用下不会团聚,因此具有较高的催化活性及稳定性。XRD、HRTEM、EDS和XPS等测试结果表明Au/Fe₃O₄已被成功制备。将其用于催化还原4-硝基苯酚得到4-氨基苯酚,表现出较高的催化活性,速率常数可达0.225 6 min^-1。重复性实验表明该催化剂具有良好的稳定性,反应9个循环之后,催化还原反应的转化率仍可达到94%。     

超声法制备Au/Fe_3O_4及其催化还原4-硝基苯酚性能

通过简易的超声法以及原位还原法成功制备出了负载型可再生Au/Fe_3O_4催化剂。利用3-氨丙基三乙氧基硅烷(APTES)作为有机桥键,将Au固定在Fe_3O_4的表面,得到单分散磁性Au/Fe_3O_4。Au0在氨基的作用下不会团聚,因此具有较高的催化活性及稳定性。XRD、HRTEM、EDS和XPS等测试结果表明Au/Fe_3O_4已被成功制备。将其用于催化还原4-硝基苯酚得到4-氨基苯酚,表现出较高的催化活性,速率常数可达0.225 6 min~(-1)。重复性实验表明该催化剂具有良好的稳定性,反应9个循环之后,催化还原反应的转化率仍可达到94%。     

Synthesis of pyrazolopyrimidines in mild conditions by gold nanoparticles supported on magnetic ionic gelation in aqueous solution

In this study, novel magnetic nanoparticle (FeNi₃) based gold NPs with high surface area and easy accessibility of active sites were successfully developed by a facile approach. FeNi₃ was functionalized with ionic gelation (IG) groups acting as robust anchors so that the gold NPs were well dispersed on the FeNi₃ without aggregation. Spirulina coating was carried out via a wet impregnation technique based on IG using tripolyphosphate as a cross-linking agent. Because of the amplification effect of IG, high loading capacities were achieved for the nanocatalysts. Furthermore, FeNi₃/IG/Au showed superparamagnetic properties, contributing to the easy recovery of the nanocatalysts by magnetic separation. FeNi₃/IG/Au was developed for the synthesis of pyrazolopyrimidines in mild conditions. The FeNi₃/IG/Au magnetic NPs were thoroughly characterized using transmission electron microscopy, field emission scanning electron microscopy, vibrating sample magnetometry, Fourier-transform infrared spectroscopy, and thermogravimetric analysis. The FeNi₃/IG/Au nanocatalyst showed high robustness and stability in reaction for up to five cycles without significant loss of activity, probably due to the high loading of IG in the catalyst.     

General Preparation of Heme Protein Functional Fe3O4@Au‐Nps Magnetic Nanocomposite for Sensitive Detection of Hydrogen Peroxide

Stable magnetic nanocomposite of gold nanoparticles (Au‐NPs) decorating Fe₃O₄ core was successfully synthesized by the linker of Boc‐L‐cysteine. Transmission electron microscope (TEM), energy dispersive X‐ray spectroscopy (EDX) and cyclic voltammograms (CV) were performed to characterize the as‐prepared Fe₃O₄@Au‐Nps. The results indicated that Au‐Nps dispersed homogeneously around Fe₃O₄ with the ratio of Au to Fe₃O₄ nanoparticles as 5–10/1 and the apparent electrochemical area as 0.121 cm². After self‐assembly of hemoglobin (Hb) on Fe₃O₄@Au‐Nps by electrostatic interaction, a hydrogen peroxide biosensor was developed. The Fe₃O₄@Au‐Nps/Hb modified GCE exhibited fast direct electron transfer between heme center and electrode surface with the heterogeneous electron transfer rate constant (Ks ) of 3.35 s⁻¹. Importantly, it showed excellent electrocatalytic activity towards hydrogen peroxide reduction with low detection limit of 0.133 μM (S /D =3) and high sensitivity of 0.163 μA μM⁻¹, respectively. At the concentration evaluated, the interfering species of glucose, dopamine, uric acid and ascorbic acid did not affect the determination of hydrogen peroxide. These results demonstrated that the introduction of Au‐Nps on Fe₃O₄ not only stabilized the immobilized enzyme but also provided large surface area, fast electron transfer and excellent biocompatibility. This facile nanoassembly protocol can be extended to immobilize various enzymes, proteins and biomolecules to develop robust biosensors.     

Gold‐loading magnetic core–shell organic/inorganic nanocomposites: facile preparation and multiple properties

Magnetic composite nanospheres (MCS) were first prepared via mini‐emulsion polymerization. Subsequently, the hybrid core–shell nanospheres were used as carriers to support gold nanoparticles. The as‐prepared gold‐loading magnetic composite nanospheres (Au‐MCS) had a hydrophobic core embed with γ‐Fe₃O₄ and a hydrophilic shell loaded by gold nanoparticles. Both the content of γ‐Fe₃O₄ and the size of gold nanoparticles could be controlled in our experiments, which resulted in fabricating various materials. On one hand, the Au‐MCS could be used as a T₂ contrast agent with a relaxivity coefficient of 362 mg^?1 ml S^?1 for magnetic resonance imaging. On the other hand, the Au‐MCS exhibited tunable optical‐absorption property over a wavelength range from 530 nm to 800 nm, which attributed to a secondary growth of gold nanoparticles. In addition, dynamic light scattering results of particle sizing and Zeta potential measurements revealed that Au‐MCS had a good stability in an aqueous solution, which would be helpful for further applications. Finally, it showed that the Au‐MCS were efficient catalysts for reductions of hydrophobic nitrobenzene and hydrophilic 4‐nitrophenol that could be reused by a magnetic separation process. Copyright © 2014 John Wiley & Sons, Ltd.     

Geometrical Structure of the Gold–Iron(III) Oxide Interfacial Perimeter for CO Oxidation

The geometrical structure of the Au‐Fe₂O₃ interfacial perimeter, which is generally considered as the active sites for low‐temperature oxidation of CO, was examined. It was found that the activity of the Au/Fe₂O₃ catalysts not only depends on the number of the gold atoms at the interfacial perimeter but also strongly depends on the geometrical structure of these gold atoms, which is determined by the size of the gold particle. Aberration‐corrected scanning transmission electron microscopy images unambiguously suggested that the gold particles, transformed from a two‐dimensional flat shape to a well‐faceted truncated octahedron when the size slightly enlarged from 2.2 to 3.5 nm. Such a size‐induced shape evolution altered the chemical bonding environments of the gold atoms at the interfacial perimeters and consequently their catalytic activity. For Au particles with a mean size of 2.2 nm, the interfacial perimeter gold atoms possessed a higher degree of unsaturated coordination environment while for Au particles with a mean size of 3.5 nm the perimeter gold atoms mainly followed the atomic arrangements of Au {111} and {100} facets. Kinetic study, with respect to the reaction rate and the turnover frequency on the interfacial perimeter gold atom, found that the low‐coordinated perimeter gold atoms were intrinsically more active for CO oxidation. ¹⁸O isotopic titration and Infrared spectroscopy experiments verified that CO oxidation at room temperature occurred at the Au‐Fe₂O₃ interfacial perimeter, involving the participation of the lattice oxygen of Fe₂O₃ for activating O₂ and the gold atoms for CO adsorption and activation.     

Ferrocene‐tagged ionic liquid stabilized on silica‐coated magnetic nanoparticles: Efficient catalyst for the synthesis of 2‐amino‐3‐cyano‐4H‐pyran derivatives under solvent‐free conditions

An advanced novel magnetic ionic liquid based on imidazolium tagged with ferrocene, a supported ionic liquid, is introduced as a recyclable heterogeneous catalyst. Catalytic activity of the novel nanocatalyst was investigated in one‐pot three‐component reactions of various aldehydes, malononitrile and 2‐naphthol for the facile synthesis of 2‐amino‐3‐cyano‐4H‐pyran derivatives under solvent‐free conditions without additional co‐catalyst or additive in air. For this purpose, we firstly synthesized and investigated 1‐(4‐ferrocenylbutyl)‐3‐methylimidazolium acetate, [FcBuMeIm][OAc], as a novel basic ferrocene‐tagged ionic liquid. This ferrocene‐tagged ionic liquid was then linked to silica‐coated nano‐Fe₃O₄ to afford a novel heterogeneous magnetic nanocatalyst, namely [Fe₃O₄@SiO₂@Im‐Fc][OAc]. The synthesized novel catalyst was characterized using ¹H NMR, ¹³C NMR, Fourier transform infrared and energy‐dispersive X‐ray spectroscopies, X‐ray diffraction, and transmission and field emission scanning electron microscopies. Combination of some unique characteristics of ferrocene and the supported ionic liquid developed the catalytic activity in a simple, efficient, green and eco‐friendly protocol. The catalyst could be reused several times without loss of activity.     

Phenylene‐Coated Magnetic Nanoparticles that Boost Aqueous Asymmetric Transfer Hydrogenation Reactions

Phenylene‐coated organorhodium‐functionalized magnetic nanoparticles are developed through co‐condensation of chiral 4‐(trimethoxysilyl)ethyl)phenylsulfonyl‐1,2‐diphenylethylene‐diamine and 1,4‐bis(triethyoxysilyl)benzene onto Fe₃O₄ followed complexation with [{Cp*RhCl₂}₂]. This magnetic catalyst exhibits excellent catalytic activity and high enantioselectivity in asymmetric transfer hydrogenation in aqueous medium. Such activity is attributed to the high hydrophobicity and the confined nature of the chiral organorhodium catalyst. The magnetic catalyst can be easily recovered by using a small external magnet and it can be reused for at least 10 times without loss of its catalytic activity. This characteristic makes it an attractive catalyst for environmentally friendly organic syntheses.     

Preparation of magnetic Fe3O4/P (GMA‐DVB)‐PEI/Pd highly efficient catalyst with core‐shell structure

In this paper, a simple route for palladium (Pd) nanoparticles attached to the surface of hollow magnetic Fe₃O₄/P (GMA‐DVB)‐polyethyleneimine (PEI) microspheres was established. Due to the large amount of imidogen groups and tertiary amine groups presenting in the PEI, Pd²⁺ ions could be anchored to the support by complexation with a polyfunctional organic ligand. Thereafter, a magnetic Pd catalyst having a high loading amount and good dispersibility was obtained by reducing Pd²⁺ ions. Afterwards, the prepared catalyst was characterized by TEM, SEM, FTIR, XRD, TGA, VSM, and UV–vis in detail. Ultimately, their catalytic activity was evaluated using the reduction of 4‐nitrophenol (4‐NP). Research showed that the Fe₃O₄/P (GMA‐DVB)‐PEI/Pd catalyst possessed high catalytic performances for the reduction of 4‐NP with a conversion rate of 98.43% within 540 s. Furthermore, the catalyst could be easily recovered and reused at least for nine successive cycles.     

Novel Au/La‐SrTiO3 microspheres: Superimposed Effect of Gold Nanoparticles and Lanthanum Doping in Photocatalysis

Novel multielement Au/La‐SrTiO₃ microspheres were synthesized by a solvothermal method using monodisperse gold and La‐SrTiO₃ nanocrystals as building blocks. The porous Au/La‐SrTiO₃ microspheres had a large surface area of 94.6 m² g^?1. The stable confined Au nanoparticles demonstrated strong surface plasmon resonance effect, leading to enhanced absorption in a broad UV/Vis/NIR range. Doping of rare‐earth metal La also broadened the absorption band to the visible region. Both the conduction and valence bands of Au/La‐SrTiO₃ microspheres thus show favorable potential for proton reduction under visible light. The superimposed effect of Au nanoparticles and La doping in Au/La‐SrTiO₃ microspheres led to high photocurrent density in photoelectrochemical water splitting and good photocatalytic activity in photodegradation of rhodamine B. The photocatalytic activities are in the order of the following: Au/La‐SrTiO₃ microspheres>Au/SrTiO₃ microspheres>La‐SrTiO₃ microspheres>SrTiO₃ microspheres.     

Encapsulation of N-heterocyclic carbene–gold (I) catalysts within magnetic core/shell silica gels: A reusable alkyne hydration catalyst

In this study, N-heterocyclic carbene–Au(I) complex, chloro[1,3-bis(2,6-diisopropylphenyl)imidazol-2-ylidene]gold (I), was successfully encapsulated within mesopores of a magnetic core/shell (γ-Fe₂O₃@SiO₂) silica gel through post-pore-size reduction by silylation reactions The post-reduction of the pore size not only minimizes the catalyst leaching during the alkyne hydration reactions but also eliminates any need for covalent modification of the catalyst or support surface. The resulting catalyst exhibits high activity in hydration reactions of various alkynes even under low catalytic loadings. The catalyst can be easily recycled from the reaction mixture using a magnet and can be reused in alkyne hydration reactions up to six times with only 52. wt% Au leaching.     

高活性Au/SnO2催化剂的制备及其在1,4-丁二醇氧化制γ-丁内酯反应中的催化应用

采用沉积沉淀法制备了一系列商业SnO₂负载的纳米Au催化剂, 通过电感耦合等离子体发射光谱、X射线粉末衍射、透射电镜和X射线光电子能谱等方法研究了溶液酸碱性、沉淀剂种类、Au负载量和焙烧温度等对催化剂性质的影响.结果表明, Au的负载量以及催化剂的焙烧温度对Au颗粒状态有较大影响.其中, 于573 K焙烧的3%Au/SnO₂催化剂在1,4-丁二醇氧化制备γ-丁内酯反应中的催化活性最好, TOF值是Au/TiO₂催化剂的15倍.这主要是由于SnO₂载体独特的性质对所负载的Au颗粒的影响.     

Magnetic GO‐PANI decorated with Au NPs: A highly efficient and reusable catalyst for reduction of dyes and nitro aromatic compounds

Due to the high activity of Au nanoparticles (NPs) for various reactions, many researchers have tried to develop heterogeneous catalysts in order to prevent irreversible agglomeration of Au NPs. Herein, magnetic graphene oxide modified with polyaniline (PANI) was used as a support for Au NPs that brings together advantages including: uniform dispersal of the catalyst in water,alarge surface area related to the graphene oxide; easy electron transfer in chemical reactions and good attachment of Au NPs to the support associated with PANI; and finally facile recovery in the presence of a magnetic field. Catalytic reduction of different analytes (Congo red, methylene blue, rhodamine B and 4‐nitro phenol) was evaluated in the presence of NaBH₄ and the results show high catalytic activity of the catalyst. The catalyst was thoroughly characterized using various methods including FTIR, XRD, XPS, FE‐SEM and HRTEM analyses while its catalytic activity was evaluated via reduction of different analytes.     

Preparation of Ag‐doped g‐C3N4 Nano Sheet Decorated Magnetic γ‐Fe2O3@SiO2 Core–Shell Hollow Spheres through a Novel Hydrothermal Procedure: Investigation of the Catalytic activity for A3, KA2 Coupling Reactions and [3 + 2] Cycloaddition

Taking advantageous of both g‐C₃N₄ and magnetic core‐shell hollow spheres, for the first time a heterogeneous and magnetically separable hybrid system was prepared through a novel and simple hydrothermal procedure and used for immobilization of bio‐synthesized Ag(0) nanoparticles. The hybrid system was fully characterized by using SEM/EDS, FTIR, VSM, TEM, XRD, TGA, DTGA, ICP‐AES, BET and elemental mapping analysis. The catalytic utility of the obtained system, h‐Fe₂O₃@SiO₂/g‐C₃N₄/Ag, for promoting ultrasonic‐assisted A³, KA² coupling reactions and [3 + 2] cycloaddition has been confirmed. The results established that the catalyst could efficiently catalyze the reaction to afford the corresponding products in high yields in short reaction times. The reusability study confirmed that the catalyst could be recovered and reused for at least five reaction runs with only slight loss of the catalytic activity. The hot filtration test also proved low silver leaching, indicating the heterogeneous nature of the catalysis.     

Formal Gold‐to‐Gold Transmetalation of an Alkynyl Group Mediated by Palladium: A Bisalkynyl Gold Complex as a Ligand to Palladium

The reaction of [Au(C?C?n‐Bu)]_n with [Pd(η³‐allyl)Cl(PPh₃)] results in a ligand and alkynyl rearrangement, and leads to the heterometallic complex [Pd(η³‐allyl){Au(C?C?n‐Bu)₂}]₂ ( 3 ) with an unprecedented bridging bisalkynyl–gold ligand coordinated to palladium. This is a formal gold‐to‐gold transmetalation that occurs through reversible alkynyl transmetalations between gold and palladium.     

Bimetallic Au–Ni Nanoparticles Embedded in SiO2 Nanospheres: Synergetic Catalysis in Hydrolytic Dehydrogenation of Ammonia Borane

Gold–nickel nanoparticles (NPs) of 3–4 nm diameter embedded in silica nanospheres of around 15 nm have been prepared by using [Au(en)₂Cl₃] and [Ni(NH₃)₆Cl₂] as precursors in a NP‐5/cyclohexane reversed‐micelle system, and by in situ reduction in an aqueous solution of NaBH₄/NH₃BH₃. Compared with monometallic Au@SiO₂ and Ni@SiO₂, the as‐synthesized Au–Ni@SiO₂ catalyst shows higher catalytic activity and better durability in the hydrolysis of ammonia borane, generating a nearly stoichiometric amount of hydrogen. During the generation of H₂, the synergy effect between gold and nickel is apparent: The nickel species stabilizes the gold NPs and the existence of gold helps to improve the catalytic activity and durability of the nickel NPs.     

Study of the Interaction of Some Potential Anticancer Gold(III) Complexes with Biologically Important Thiols Using NMR,UV–Vis,and Electrochemistry

The interaction of gold(III) complexes [Au(en)Cl₂]Cl, [Au(en)₂]Cl₃, [Au(cis‐DACH)Cl₂]Cl, and [Au(cis‐DACH)₂]Cl₃ (en = ethylenediamine, DACH = cis‐1,2‐diaminocyclohexane) with biologically important thiols, such as glutathione (GSH), dl ‐penicillamine (PSH), mercaptoacetic acid (MAA), and N‐(2‐mercaptopropionyl)glycine (MPG), has been studied using ¹H, ¹³C NMR, UV–vis spectroscopy and electrochemistry in aqueous solution. Kinetic data revealed that the reactivity of their substitution reaction followed the order: [Au(en)Cl₂]⁺ > [Au(en)₂]³⁺ > [Au(cis‐DACH)Cl₂]⁺ > [Au(cis‐DACH)₂]³⁺. The thiol reactivity increased with decreasing its size, viz. MAA ≫ MPG > PSH > GSH. Square wave stripping voltammetry displayed peaks for Au(III) and Au(I) at +0.875 V and +1.4 V respectively. The interaction of the complexes with thiols resulted in reduction of gold(III) to gold(I) and thiol ligands (RSH) were oxidized to disulfide (RSSR).