CuI‐functionalized halloysite nanoclay as an efficient heterogeneous catalyst for promoting click reactions: Combination of experimental and computational chemistry

Amine‐functionalized halloysite nanotubes (HNTs‐2 N) were prepared and further modified by introduction of salicylaldehyde and formation of imine functionality (HNTs‐2 N‐Sal). The latter was subsequently used for immobilization of CuI and formation of CuI@HNTs‐2 N‐Sal, which could effectively promote click reactions of terminal alkynes, sodium azide and α‐haloketones or alkyl halides in aqueous media and under mild reaction conditions to afford 1,2,3‐triazoles in relatively short reaction times. Notably, the catalyst could be recycled in up to six reaction runs with negligible loss of catalytic activity and CuI leaching. Also, the geometry of CuI adsorption on the modified HNTs surface was explored by molecular simulation with density functional theory. Furthermore, topographic steric maps of possible coordination modes were obtained using the recently released SambVca2 web application tool. Based on obtained results, a catalytic site with superior performance was suggested.     

Polycarbosilane‐supported titanium(IV) catalyst for Knoevenagel condensation reaction

Polycarbosilane (PCS) was synthesized by the polycondensation of trichloromethylsilane and trimethoxyvinylsilane in the presence of sodium metal. PCS has a highly crosslinked structure, high ceramic yield and high surface area. Titanium metal ion was attached to the polycarbosilane and its catalytic activity was investigated. The Knoevenagel condensation reaction catalysed by titanium‐incorporated polycarbosilane is reported. The titanium‐incorporated PCS catalysed the reaction well and with a diverse set of substrates the reaction proceeded with good yield. PCS‐supported transition metal catalysts have been prepared for the first time and used successfully in the Knoevenagel condensation reaction. Copyright © 2012 John Wiley & Sons, Ltd.     

Use of an efficient polystyrene‐supported cerium catalyst for one‐pot multicomponent synthesis of spiro‐piperidine derivatives and click reactions in green solvent

One‐pot multicomponent reactions are very demanding in synthetic organic chemistry. Here we report a new polystyrene‐supported cerium catalyst (PS‐Ce‐amtp) obtained via an easy two‐step procedure, which was thoroughly characterized using various techniques. PS‐Ce‐amtp catalyses the environmentally benign one‐pot multicomponent synthesis of spiro‐piperidine derivatives through the reaction of substituted aniline, cyclic active methylene compound and formaldehyde at room temperature. The catalyst also exhibits excellent catalytic activity in one‐pot synthesis of 1,4‐disubstituted 1,2,3‐triazoles via click reaction between in situ generated azides (derived from anilines and amines) and terminal alkynes. The catalyst can be recovered easily after reaction and reused five times without significant loss in its catalytic activity. The advantageous features of this catalyst are atom economy, operational simplicity, short reaction times, easy handling and high recycling efficiency.     

Practical one-pot synthesis of 5-alkynyl-1,2,3-triazoles via heterogeneous copper(I)-catalyzed tandem three-component click/alkynylation reaction

An efficient and practical route to 5-alkynyl-1,2,3-triazoles has been developed via heterogeneous tandem CuAAC/alkynylation reaction of organic azides, alkynes and 1-bromoalkynes by using an L-proline-functionalized MCM-41-anchored copper(I) complex [L-Proline-MCM-41-CuCl] as catalyst under mild conditions. The reaction produces a wide variety of 5-alkynyl-1,2,3-triazoles in mostly good to excellent yields. The new immobilized copper(I) complex can be readily prepared from commercially available and inexpensive reagents and displays the same catalytic activity as CuCl. The L-Proline-MCM-41-CuCl catalyst is also easy to recover via a simple filtration process and can be reused at least seven times without apparent loss of activity.     

A Study of Graphene‐Based Copper Catalysts: Copper(I) Nanoplatelets for Batch and Continuous‐Flow Applications

The use of graphene derivatives as supports improves the properties of heterogeneous catalysts, with graphene oxide (GO) being the most frequently employed. To explore greener possibilities as well as to get some insights into the role of the different graphenic supports (GO, rGO, carbon black, and graphite nanoplatelets), we prepared, under the same standard conditions, a variety of heterogeneous Cu catalysts and systematically evaluated their composition and catalytic activity in azide–alkyne cycloadditions as a model reaction. The use of sustainable graphite nanoplatelets (GNPs) afforded a stable Cu^I catalyst with good recyclability properties, which are compatible with flow conditions, and able to catalyze other reactions such as the regio‐ and stereoselective sulfonylation of alkynes (addition reaction) and the Meerwein arylation (single electron transfer process).     

Supported copper (I) catalyst from fish bone waste: An efficient,green and reusable catalyst for the click reaction toward N‐substituted 1,2,3‐TRIAZOLES

An eco‐efficient, green, and multi‐gram procedure is presented for one‐pot multicomponent synthesis of N‐substituted 1,2,3‐triazoles by using waste fishbone powders supported CuBr (FBPs‐CuBr) as catalyst. FBPs‐CuBr is found to be an efficient heterogeneous catalyst and a series of 1,2,3‐triazoles are obtained in moderate to excellent yields in water under MW irradiation (70–98%). It can be separated conveniently by a simple filtration and reused at least seven consecutive runs with a slight drop in the product yields. Furthermore, the desired product still could be obtained in 80% yield when the scale of the reaction was increased to 40.0 mmol.     

Immobilized copper(II) on nitrogen‐rich polymer‐entrapped Fe3O4 nanoparticles: a highly loaded and magnetically recoverable catalyst for aqueous click chemistry

A heterogeneous magnetic copper catalyst was prepared via anchoring of copper sulfate onto multi‐layered poly(2‐dimethylaminoethyl acrylamide)‐coated magnetic nanoparticles and was characterized using various techniques. The catalyst was found to be active, effective and selective for one‐pot three‐component reaction of alkyl halide, sodium azide and alkyne, known as copper‐catalyzed click synthesis of 1,2,3‐triazoles. As little as 0.3 mol% of catalyst was found to be effective under the optimum conditions. The catalyst could also be recycled and reused up to seven times without significant loss of activity. Thermal stability, high loading level of copper on catalyst, broad diversity of alkyl/benzyl/allyl bromide/chloride and alkyl/aryl terminal alkynes without isolation of azide intermediate, and good to excellent yields of products make this procedure highly economical. Copyright © 2015 John Wiley & Sons, Ltd.     

Copper immobilized onto polymer‐coated magnetic nanoparticles as recoverable catalyst for ‘click’ reaction

Copper supported on polymer‐coated magnetic nanoparticles was designed and synthesized as a separable heterogeneous catalyst. The catalyst was fully characterized using several techniques such as Fourier transform infrared and energy‐dispersive X‐ray spectroscopies, scanning and transmission electron microscopies, X‐ray diffraction, vibrating sample magnetometry, thermogravimetric analysis and inductively coupled plasma atomic emission spectrometry. All results showed that copper was successfully supported on the polymer‐coated magnetic nanoparticles. Also, results showed that the synthesized material can be used as an efficient catalyst for the preparation of a series of 1,4‐disubstituted 1,2,3‐triazoles from corresponding halides, alkynes and sodium azide. The catalyst can be easily isolated from the reaction solution by applying an external magnet and reused for nine runs without any significant loss of catalytic activity.     

Precisely controlled copper(0)‐catalyzed one‐pot reaction: Concurrent living radical polymerization and click chemistry

Copper(0)‐catalyzed one‐pot reaction combining living radical polymerization and “click chemistry” was investigated. By precisely tuning reaction time, three novel well‐defined polymers with different degree of carboxyl substitution, poly(propargyl methacrylate) (PPgMA), poly(1‐(4‐carboxyphenyl)‐[1,2,3]triazol‐4‐methyl methacrylate) (PCTMMA), and poly(1‐(4‐carboxyphenyl)‐[1,2,3]triazol‐4‐methyl methacrylate‐co‐propargyl methacrylate) (PCTMMA‐co‐PPgMA) were selectively obtained via Cu(0) powder/N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA) cocatalyzed LRP and click chemistry. In addition, gel permeation chromatography and ¹H NMR analysis in conjunction with FTIR spectroscopy elucidate that one‐pot process undergoes three steps due to a pronounced rate enhancement of click reaction: (1) generating new monomer, 1‐(4‐carboxyphenyl)‐[1,2,3]triazol‐4‐methyl methacrylate (CTMMA); (2) copolymerization of two monomers (CTMMA and PgMA); (3) building homopolymer PCTMMA. Surprisingly, in contrast to typical Cu(I)‐catalyzed atom transfer radical polymerization (ATRP), copper(0)‐catalyzed one‐pot reaction showed high carboxylic acid group tolerance. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

MCM‐41‐supported mercapto palladium(0) complex: an efficient and recyclable catalyst for the heterogeneous Stille coupling reaction

The Stille cross‐coupling reaction of organostannanes with aryl halides was achieved in the presence of a catalytic amount of MCM‐41‐supported mercapto palladium(0) complex (1 mol%) in DMF? H₂O (9:1) under air atmosphere in good to high yields. This MCM‐41‐supported palladium catalyst can be reused at least 10 times without any decrease in activity. Copyright © 2009 John Wiley & Sons, Ltd.     

Impregnated copper ferrite on mesoporous graphitic carbon nitride: An efficient and reusable catalyst for promoting ligand‐free click synthesis of diverse 1,2,3‐triazoles and tetrazoles

Magnetic CuFe₂O₄/g‐C₃N₄ hybrids were synthesized through a facile method and their catalytic performances were evaluated in click chemistry for the first time. The structural and morphological characterization of prepared materials was carried out by different techniques such as X‐ray diffraction, high‐resolution transmission electron microscopy, field emission scanning electron microscopy, Fourier infrared spectroscopy, vibrating sample magnetometry, thermogravimetric analysis, and N₂ adsorption–desorption analysis (Brunauer–Emmett–Teller surface area). The utilization of magnetic CuFe₂O₄/g‐C₃N₄ enabled superior performance in the one‐pot azide–alkyne cycloaddition reaction in water using alkyl halides and epoxides as azide precursors without the need of any additional agents. The present system is broad in scope and especially practical for the synthesis of macrocyclic triazoles and also tetrazoles. In addition, the catalytic system highly fulfills the demands of “green click chemistry” with its convenient conditions, especially easy access to a variety of significant products in low catalyst loading and simple work‐up and isolation procedure.     

Synthesis and Thermoreversible Gelation Properties of Main‐Chain Poly(pyridine‐2,6‐dicarboxamide‐triazole)s

A series of main‐chain poly(amide‐triazole)s were prepared by copper(I)‐catalyzed alkyne–azide AABB‐type copolymerizatons between five structurally similar diacetylenes 1 – 5 with the same diazide 6 . The acetylene units in monomers 1 – 5 possessed different degrees of conformational flexibility due to the different number of intramolecular hydrogen bonds built inside the monomer architecture. Our study showed that the conformational freedom of the monomer had a profound effect on the polymerization efficiency and the thermoreversible gelation properties of the resulting copolymers. Among all five diacetylene monomers, only the one, that is, 1 ‐Py(NH)₂ which possesses the pyridine‐2,6‐dicarboxamide unit with two built‐in intramolecular H bonds could produce the corresponding poly(amide‐triazole) Poly‐(PyNH)₂ with a significantly higher degree of polymerization (DP) than other monomers with a lesser number of intramolecular H bonds. In addition, it was found that only this polymer exhibited excellent thermoreversible gelation ability in aromatic solvents. A self‐assembling model of the organogelating polymer Poly‐(PyNH)₂ was proposed based on FTIR spectroscopy, XRD, and SEM analyses, in which H bonding, π–π aromatic stacking, hydrophobic interactions, and the structural rigidity of the polymer backbone were identified as the main driving forces for the polymer self‐assembly process.     

Polymer‐supported macrocyclic Schiff base palladium complex as an efficient catalyst for the Heck reaction

A polymer‐supported macrocyclic Schiff base palladium complex has been synthesized. In the Heck reaction of aryl iodides and bromides with ethyl acrylate or styrene, the complex has been proved to give the corresponding products in good to excellent yields. The reaction proceeded smoothly in the presence of 0.5 mol% of catalyst in DMF within 1–4 h. Recycling studies have shown that the catalyst can be readily recovered and reused for four cycles with only a slightly decrease in its activity. Copyright © 2011 John Wiley & Sons, Ltd.     

A PdCl2–ionic liquid brush assembly: an efficient and reusable catalyst for Mizoroki–Heck reaction in neat water

An efficient and reusable heterogeneous catalytic assembly of PdCl₂ held in ionic liquid brushes has been synthesized and an environmentally‐friendly procedure was developed for coupling aryl iodides with acrylic acid. These reactions were conducted in water under aerobic conditions with water‐insoluble or even solid aryl iodides and they proceeded smoothly and cleanly without any organic co‐solvent or other additives. A 0.5 mol% (based on Pd atom) dose of the catalyst was found to be sufficient for Mizoroki–Heck reaction. The catalyst is easily recovered post reaction, via simple filtration, and reused at least eight times without a noticeable loss of activity. The protocol has the advantages of excellent yield, environmental friendliness, and catalyst recyclability. Copyright © 2011 John Wiley & Sons, Ltd.     

Copper(I) Zeolites as Heterogeneous and Ligand‐Free Catalysts: [3+2] Cycloaddition of Azomethine Imines

Clicking in zeolites : Copper(I)‐exchanged zeolites proved to be practical and efficient catalysts for the cycloaddition of azomethine imines with alkynes, providing a convenient access to N,N‐bicyclic pyrazolidinone derivatives (see scheme). With high regioselectivity, 100 % atom economy, and convenient product isolation, this heterogeneously catalyzed version of the Dorn cycloaddition corresponds to click‐chemistry criteria.

     

"Click chemistry" in zeolites: copper(I) zeolites as new heterogeneous and ligand-free catalysts for the Huisgen [3+2] cycloaddition

For the first time, copper(I)-exchanged zeolites were developed as catalysts in organic synthesis. These solid materials proved to be versatile and efficient heterogeneous, ligand-free catalytic systems for the Huisgen [3+2] cycloaddition. These cheap and easy-to-prepare catalysts exhibited a wide scope and compatibility with functional groups. They are very simple to use, easy to remove (by filtration), and are recyclable (up to three times without loss of activity). Investigations with deuterated alkynes and deuterated zeolites proved that this Cu(I)-zeolite-catalyzed "click" reaction exhibited a mechanism different from that reported for the Meldal-Sharpless version.     

Dinuclear Copper Intermediates in Copper(I)‐Catalyzed Azide–Alkyne Cycloaddition Directly Observed by Electrospray Ionization Mass Spectrometry

The mechanism of the CuAAC reaction has been investigated by electrospray ionization mass spectrometry (ESI‐MS) using a combination of the neutral reactant approach and the ion‐tagging strategy. Under these conditions, for the first time, putative dinuclear copper intermediates were fished out and characterized by ESI(+)‐MS/MS. New insight into the CuAAC reaction mechanisms is provided and a catalytic cycle is proposed.     

Silica‐supported terpyridine palladium(II) complex as an efficient and reusable catalyst for Heck and Suzuki cross‐coupling reactions

Silica‐supported terpyridine palladium(II) was prepared and used as an effective and recyclable catalyst in Mizoroki–Heck and Suzuki–Miyaura coupling reactions. The catalyst was very effective for the Mizoroki–Heck reaction of aryl halides with olefins and conversion was in most cases excellent. The catalyst showed good thermal stability (up to 230 °C) and could be recovered and reused for four reaction cycles. The Suzuki coupling of aryl iodides with aryl boronic acids in the presence of the catalyst was also investigated and the reaction proceeded with a short reaction time and excellent conversion. Copyright © 2013 John Wiley & Sons, Ltd.