Benzylic bromination catalyzed by triphenylphosphine selenide via Lewis basic activation

The synthesis of benzyl bromides was achieved under mild reaction conditions using N-bromosuccinimide as a bromine source and triphenylphosphine selenide as a catalyst. These conditions were compatible with a variety of substrates including boronic esters, protected amines to give imines, and carboxylic acids (to give phthalides when ortho to the benzylic center). A preliminary mechanistic investigation utilizing calculated bond dissociation energies (BDE) is employed to rationalize how a Lewis base can activate a radical mechanism.     

Cationic polyelectrolytes. II. Amination of chloromethylated polystyrene with hydroxyalkylic secondary amines

The reaction of chloromethylated polystyrene with methyl(2- hydroxyethyl)amine and butyle (2-hydroxyethyl)amine was studied kinetically. The reaction of benzyl chloride with these amines was also investigated for comparison. N,N-dimethylformamide and dioxane were used as solvents. The reactions of benzyl chloride with the two amines in these solvents took place according to normal kinetics of the second order. Reaction kinetics depend on the nature of the amine and solvent in Chloromethylated polystyrene reactions. In dioxane the self-accelerating effect of the reaction for β ? 0.5 is apparent. Steric hindrance of the reaction, beginning with a conversion degree of about 75%, wss observed for butyl(2-hydroxyethyl)amine in N,N-dimethylformamide. This self-accelerating effect is observed in dioxane at the same reaction degree. The activation energies and frequency factors were calculated for the amination of benzyl chloride and chloromethylated polystyrene with the two amines in N,N-dimethylformamide and dioxane.     

The “Borrowing Hydrogen Strategy” by Supported Ruthenium Hydroxide Catalysts: Synthetic Scope of Symmetrically and Unsymmetrically Substituted Amines

The N‐alkylation of ammonia (or its surrogates, such as urea, NH₄HCO₃, and (NH₄)₂CO₃) and amines with alcohols, including primary and secondary alcohols, was efficiently promoted under anaerobic conditions by the easily prepared and inexpensive supported ruthenium hydroxide catalyst Ru(OH)_x/TiO₂. Various types of symmetrically and unsymmetrically substituted “tertiary” amines could be synthesized by the N‐alkylation of ammonia (or its surrogates) and amines with “primary” alcohols. On the other hand, the N‐alkylation of ammonia surrogates (i.e., urea and NH₄HCO₃) with “secondary” alcohols selectively produced the corresponding symmetrically substituted “secondary” amines, even in the presence of excess amounts of alcohols, which is likely due to the steric hindrance of the secondary alcohols and/or secondary amines produced. Under aerobic conditions, nitriles could be synthesized directly from alcohols and ammonia surrogates. The observed catalysis for the present N‐alkylation reactions was intrinsically heterogeneous, and the retrieved catalyst could be reused without any significant loss of catalytic performance. The present catalytic transformation would proceed through consecutive N‐alkylation reactions, in which alcohols act as alkylating reagents. On the basis of deuterium‐labeling experiments, the formation of the ruthenium dihydride species is suggested during the N‐alkylation reactions.     

Enantioselective Oxidative Aerobic Dealkylation of N‐Ethyl Benzylisoquinolines by Employing the Berberine Bridge Enzyme

N‐Dealkylation methods are well described for organic chemistry and the reaction is known in nature and drug metabolism; however, to our knowledge, enantioselective N‐dealkylation has not been yet reported. In this study, exclusively the (S)‐enantiomers of racemic N‐ethyl tertiary amines (1‐benzyl‐N‐ethyl‐1,2,3,4‐tetrahydroisoquinolines) were dealkylated to give the corresponding secondary (S)‐amines in an enantioselective fashion at the expense of molecular oxygen. The reaction is catalyzed by the berberine bridge enzyme, which is known for C? C bond formation. The dealkylation was demonstrated on a 100 mg scale and gave optically pure dealkylated products (ee>99 %).     

Direct sp3 C?H Amination of Nitrogen‐Containing Benzoheterocycles Mediated by Visible‐Light‐Photoredox Catalysts

Visible‐light‐mediated direct sp³ C? H amination of benzocyclic amines via α‐aminoalkyl radicals by using photoredox catalysts is described here. The obtained N,N‐acetals were also successfully applied for carbon–carbon bond forming reactions with carbon nucleophiles. The procedure is suitable for a late‐stage modification of C? H bonds to C? C bonds.     

Dynamic Kinetic Resolution of Homoallylic Alcohols: Application to the Synthesis of Enantiomerically Pure 5,6‐Dihydropyran‐2‐ones and δ‐Lactones

Dynamic kinetic resolution of various homoallylic alcohols with the use of Candida antarctica lipase B and ruthenium catalyst 2 afforded homoallylic acetates in high yields and with high enantioselectivity. These enantiopure acetates were further transformed into homoallylic acrylates after hydrolysis of the ester function and subsequent DMAP‐catalyzed esterification with acryloyl chloride. After ring‐closing metathesis 5,6‐dihydropyran‐2‐ones were obtained in good yields. Selective hydrogenation of the carbon? carbon double bond afforded the corresponding δ‐lactones without loss of chiral information.     

Asymmetric Hydrogenation of α,β‐Unsaturated Nitriles with Base‐Activated Iridium N,P Ligand Complexes

Although many chiral catalysts are known that allow highly enantioselective hydrogenation of a wide range of olefins, no suitable catalysts for the asymmetric hydrogenation of α,β‐unsaturated nitriles have been reported so far. We have found that Ir N,P ligand complexes, which under normal conditions do not show any reactivity towards α,β‐unsaturated nitriles, become highly active catalysts upon addition of N,N‐diisopropylethylamine. The base‐activated catalysts enable conjugate reduction of α,β‐unsaturated nitriles with H₂ at low catalyst loadings, affording the corresponding saturated nitriles with high conversion and excellent enantioselectivity. In contrast, alkenes lacking a conjugated cyano group do not react under these conditions, making it possible to selectively reduce the conjugated C?C bond of an α,β‐unsaturated nitrile, while leaving other types of C?C bonds in the molecule intact.     

Insights into the Oxidative Dehydrogenation of Amines with Nanoparticulate Iridium Oxide

The aerobic oxidation of amines offers a promising route towards many versatile chemical compounds. Within this contribution, we extend our previous investigations of iridium oxide‐catalyzed alcohol oxidation to amine substrates. In addition to demonstrating the versatility of this catalyst, particular attention is focused on the mechanisms of the reaction. Herein, we demonstrate that although amines are oxidized slower than the corresponding alcohols, the catalyst has a preference for amine substrates, and oxidizes various amines at turnover frequencies greater than other systems found in the open literature. Furthermore, the competition between double amine dehydrogenation, to yield the corresponding nitrile, and amine–imine coupling, to yield the corresponding coupled imine, has been found to arise from a competitive reaction pathway, and stems from an effect of substrate‐to‐metal ratio. Finally, the mechanism responsible for the formation of N‐benzylidene‐1‐phenylmethanamine was examined, and attributed to the coupling of free benzyl amine substrate and benzaldehyde, formed in situ through hydrolysis of the primary reaction product, benzyl imine.     

Palladium Supported on Zinc Oxide Nanoparticles as Efficient Heterogeneous Catalyst for SuzukiMiyaura and Hiyama Reactions under Normal Laboratory Conditions

Nanoscale Pd supported on ZnO was prepared by a facile coprecipitation method. Pd/ZnO Nanoparticles were characterized by using XRD, TEM, SEM, XPS, BET specific surface area measurement, and thermogravimetric analysis. This catalyst was used as novel and excellent heterogeneous catalyst for ligand‐free C? C bond‐formation particularly in the synthesis of unsymmetrical biaryls by Suzuki? Miyaura and Hiyama cross‐coupling reactions under air atmosphere without use of any Ar or N₂ flow. The catalyst can be recovered and recycled several times without marked loss of activity.     

“One pot” synthesis of tertiary amines: Ru(II) catalyzed direct reductive N-benzylation of imines with benzyl bromide derivatives

The direct reductive N-benzylation of imines by reaction with benzyl bromide derivatives, in the presence of [RuCl₂(p-cymene)]₂ catalyst and PhSiH₃, is performed under mild conditions without additional base. This reaction proceeds by a tandem imine hydrosilylation/nucleophilic substitution with benzyl bromide derivatives to result the tertiary amines.     

Palladium-Catalyzed Hydroaminocarbonylation of Olefins with Aliphatic Amines without Additives

Palladium-catalyzed hydroaminocarbonylation reactions of olefins using aliphatic amines were performed under carbon monoxide atmosphere. Despite the strong basicity of the applied nucleophiles, the targeted amides were successfully synthesized in the absence of acidic additives. Styrene, oct-1-ene and isoprene were transformed to the corresponding amide isomers in moderate to good isolated yields under optimized reaction conditions. Various aliphatic amines were used as N-nucleophiles. The effect of chiral diphosphines on product distribution, that is, on chemo-, regio- and enantioselectivities was also studied. Plausible explanation was given for the additive-free hydroaminocarbonylation reaction.     

Direct C?H Functionalization of Enamides and Enecarbamates by Using Visible‐Light Photoredox Catalysis

Direct C? H functionalization of various enamides and enecarbamates was realized through visible‐light photoredox catalyzed reactions. Under the optimized conditions using [Ir(ppy)₂(dtbbpy)PF₆] as photocatalyst in combination with Na₂HPO₄, enamides such as N‐vinylpyrrolidinone could be easily functionalized by irradiation of the reaction mixture overnight in acetonitrile with visible light. The scope of the reaction with respect to enamide and enecarbamate substrates by using diethyl 2‐bromomalonate for the alkylation reaction was explored, followed by an investigation of the scope of alkylating reagents used to react with the enamides and enecarbamates. The results indicated that reaction takes place with quite broad substrate scope, however, tertiary enamides with an internal C?C double bond in the E configuration could not be alkylated. Alkylation of N‐vinyl tertiary enamides and enecarbamates gave monoalkylated products exclusively in the E configuration. Alkylation of N‐vinyl secondary enamides gave doubly alkylated products. Double bond migration was observed in the reaction of electron‐deficient bromides such as 3‐bromoacetyl acetate with N‐vinylpyrrolidinone. A mechanism is proposed for the reaction that is different from reported reactions of SOMOphiles with a nonfunctionalized C?C double bond. Further tests on the trifluoromethylation and arylation of enamides and enecarbamates under similar conditions showed that the reactions could serve as a mild, practical, and environmentally friendly approach to various functionalized enamides and enecarbamates.     

钠汞齐作为一种有用的还原试剂还原带有不同官能团的叠氮成相应的有机胺

Reduction of azides to amines without touching benzyl, t-butyldimethylsilyl, t-butyldiphenylsilyl, trityl and tetrahydropyranyl ether protecting groups, C-C double and triple bond, as well as aromatic bromide and nitrile functional groups, was achieved using sodium amalgam as a reducing reagent in methanol at temperature from -40℃ to room temperature. However, ester group was reduced under this condition.     

Methandiide as a Non‐Innocent Ligand in Carbene Complexes: From the Electronic Structure to Bond Activation Reactions and Cooperative Catalysis

The synthesis of a ruthenium carbene complex based on a sulfonyl‐substituted methandiide and its application in bond activation reactions and cooperative catalysis is reported. In the complex, the metal–carbon interaction can be tuned between a Ru?C single bond with additional electrostatic interactions and a Ru?C double bond, thus allowing the control of the stability and reactivity of the complex. Hence, activation of polar and non‐polar bonds (O?H, H?H) as well as dehydrogenation reactions become possible. In these reactions the carbene acts as a non‐innocent ligand supporting the bond activation as nucleophilic center in the 1,2‐addition across the metal–carbon double bond. This metal–ligand cooperativity can be applied in the catalytic transfer hydrogenation for the reduction of ketones. This concept opens new ways for the application of carbene complexes in catalysis.     

Access to chiral tertiary amines via the iridium-catalyzed asymmetric hydrogenation of enamines

The asymmetric hydrogenation of N,N-dialkyl and N-alkyl-N-aryl enamines to chiral tertiary amines was studied. All the N,P-ligated iridium complexes investigated were active catalysts for the reaction, but only those with bicycle-supported oxazoline-phosphine ligands gave reasonable stereoinduction. The best catalyst produced a range of chiral tertiary amines in up to 87% ee.     

Enantioselective C?C and C?H Bond Formation Mediated or Catalyzed by Chiral ebthi Complexes of Titanium and Zirconium

The development of catalytic processes that effect enantioselective bond formation under mild conditions is an important and challenging task in modern chemical synthesis. In this connection, chiral C₂-symmetric ansa-metallocenes (bridged metallocenes) have found notable applications as catalysts. This article discusses the chemistry of this class of chiral metallocene complexes with regard to their utility in catalytic and enantioselective C? C and C? H bond formation reactions. In addition, where applicable, a brief comparison with other related catalytic enantioselective processes is offered. Many of the reactions effected with high levels of enantioselectivity by catalytic amounts of these complexes are of great significance to the preparation of new materials and in the synthesis of therapeutic agents. For example, zirconocene complexes readily catalyze the enantioselective addition of alkylmagnesium halides to alkenes, and cationic zirconocene complexes may promote the highly stereoregulated copolymerization of terminal alkenes. Furthermore, the related chiral titanocenes are involved in an impressive range of useful asymmetric catalytic reactions, including the enantioselective hydrogenation of olefins and reduction of imines or ketones. This review attempts to bring together the practical aspects of the use of [(ebthi)M] complexes of Group 4 transition metals (catalyst synthesis and resolution), outline the manner in which the C₂-symmetric chiral ligands are believed to initiate stereoselective bond formation, and highlight the aspects of this chemistry that are less well understood and require further research.     

Mesoionic N-heterocyclic olefin catalysed reductive functionalization of CO2 for consecutive N-methylation of amines

A mesoionic N-heterocyclic olefin (mNHO) was introduced as a metal-free catalyst for the reductive functionalization of CO₂ leading to consecutive double N-methylation of primary amines in the presence of 9-borabicyclo[3.3.1]nonane (9-BBN). A wide range of secondary amines and primary amines were successfully methylated under mild conditions. The catalyst sustained over six successive cycles of N-methylation of secondary amines without compromising its activity, which encouraged us to check its efficacy towards double N-methylation of primary amines. Moreover, this method was utilized for the synthesis of two commercially available drug molecules. A detailed mechanistic cycle was proposed by performing a series of control reactions along with the successful characterisation of active catalytic intermediates either by single-crystal X-ray study or by NMR spectroscopic studies in association with DFT calculations.

Mesoionic N-heterocyclic olefin (mNHO) catalysed consecutive N-methylation of primary and secondary amines was accomplished under 1 atm CO₂ pressure in the presence of 9-BBN as a reducing agent nearly at room temperature.     

One pot synthesis of <Emphasis Type="Italic">N</Emphasis>-ethylaniline from nitrobenzene and ethanol

A novel method for the one pot synthesis of N-alkyl arylamines from nitro aromatic compounds and alcohols is proposed through the combination of the aqueous-phase reforming of alcohol for hydrogen production, the reduction of nitro aromatic compounds for the synthesis of aromatic amine and the N-alkylation of aromatic amine for the production of N-alkyl arylamine over an identical catalyst under the same conditions of temperature and pressure in a single reactor. In this process, hydrogen generated from the aqueous-phase reforming of alcohols was used in-situ for the hydrogenation of nitro aromatic compounds for aromatic amine synthesis, followed by N-alkylation of aromatic amine with alcohols to form the corresponding N-alkyl arylamines at a low partial pressure of hydrogen. For the system composed of nitrobenzene and ethanol, under the conditions of 413 K and P _N2 = 1 MPa, the conversion degrees of nitrobenzene and aniline were 100%, the selectivity to N-ethylaniline and N, N-diethylaniline were 85.9% and 0%–4%, respectivity, after reaction for 8 h at the volumetric ratio of nitrobenzene:ethanol:water = 10:60:0. The selectivity for N, N-diethylaniline production is much lower than that through the traditional method. In this process, hydrogen and aromatic amines generated from the aqueous-phase reforming of alcohols and hydrogenation of nitro aromatic compounds, respectively, could be promptly removed from the surface of the catalyst due to the occurrence of in-situ hydrogenation and N-alkylation reactions. Thus, this may be a potential approach to increase the selectivity to N-alkyl arylamine. Supported by the Program for New Century Excellent Talents in University (Grant No. NCET-04-0557), and the Specialized Research Fund for the Doctoral Program of High Education (Grant No. SRFDP-20060337001)     

Asymmetric Hydrogenation of Cationic Intermediates for the Synthesis of Chiral N,O-Acetals

For over half a century, transition-metal-catalyzed homogeneous hydrogenation has been mainly focused on neutral and readily prepared unsaturated substrates. Although the addition of molecular hydrogen to C=C, C=N, and C=O bonds represents a well-studied paradigm, the asymmetric hydrogenation of cationic species remains an underdeveloped area. In this study, we were seeking a breakthrough in asymmetric hydrogenation, with cationic intermediates as targets, and thereby anticipating applying this powerful tool to the construction of challenging chiral molecules. Under acidic conditions, both N- or O-acetylsalicylamides underwent cyclization to generate cationic intermediates, which were subsequently reduced by an iridium or rhodium hydride complex. The resulting N,O-acetals were synthesized with remarkably high enantioselectivity. This catalytic strategy exhibited high efficiency (turnover number of up to 4400) and high chemoselectivity. Mechanistic studies supported the hypothesis that a cationic intermediate was formed in situ and hydrogenated afterwards. A catalytic cycle has been proposed with hydride transfer from the iridium complex to the cationic sp² carbon atom being the rate-determining step. A steric map of the catalyst has been created to illustrate the chiral environment, and a quantitative structure–selectivity relationship analysis showed how enantiomeric induction was achieved in this chemical transformation.     

N-benzyl-N-[(E)-2-phenylethenyl]trifluoromethanesulfonamide

In the search for an approach to N-vinyltriflamides with a free NH group TfNHCH=CHR (Tf = CF₃SO₂) N-(benzyl)-N-(2-bromo-2-phenylethenyl)triflamide TfN(Bn)CH=CHPh was synthesized through bromination-dehydrobromination of N-(benzyl)-N-(2-phenylethyl)triflamide. At removing the benzyl protecttion by the action of trifluoromethanesulfonic acid benzyl alcohol separated; however instead of the target N-styryltriflamide unexpectedly the product of its hydrogenation was obtained, N-(2-phenylethyl)triflamide. Obviously, the benzyl alcohol was the hydrogen donor, and the easy hydrogenation was facilitated by the high electrophilicity of the double bond in N-styryltriflamide because of strong electron-acceptor effect of the triflyl group.