重氮化合物与醇的插入反应合成α-烷氧基-β-二羰基化合物

研究了在过渡金属配合物催化下α-重氮-β-二羰基化合物与醇的插入反应, 考察了重氮化合物的结构、醇的结构、催化剂的性质、反应溶剂和反应温度对这一反应的影响. 发现当重氮化合物与甲醇的物质的量比为1∶10, 1 mmol% Rh₂(OAc)₄为催化剂和回流的苯的条件下, 反应能够以高的化学产率生成α-甲氧基-β-二羰基化合物. 手性醇衍生的重氮乙酰乙酸酯反应的产物中两种非对应异构体的比例为3∶2～1∶1.     

Synthesis of benzo[h]quinolone and benzo[c]acridinone derivatives by Fe3O4@PS-Arginine[HSO4] as an efficient magnetic nanocatalyst

Fe₃O₄ magnetic nanoparticles were synthesized and functionalized by propylsilan and after that arginine. The synthesized Fe₃O₄@PS-Arginine magnetic nanoparticles were modified to obtain Fe₃O₄@PS-Arg[HSO₄]. These nanoparticles were used as environmental friendly solidacid magnetic nanocatalyst for the synthesis of 2-amino-4-arylbenzo[h]quinoline-3-carbonitrile and 10,10-dimethyl-7-aryl-9,10,11,12-tetrahydrobenzo[c]acridin-8(7H)-one derivatives via the one-pot reaction of α-naphthilamine and aromatic aldehydes with malononitrile or dimedone. Simple operation, high reaction yields, reusability of catalyst for several times, short reaction time and easy separation from reaction mixture are the key advantages of using this catalyst.     

HYDROFORMYLATION OF MMA CATALYZED BY SILICA-SUPPORTED POLY-γ-AMINO PROPYLSILOXANE-Rh-Co BIMETALLIC COMPLEX

A silica-supported poly-γ- aminopropylsiloxane-rhodium-cobalt bimetallic complex(abbreviated as SiO_2-NH_2-Rh-Co)has been prepared and used as catalyst for hydroformylationof methyl methacrylate. The results showed that the catalyst could catalyze the reaction in95.6% conversion with 92.8% selectivity for the normal aldehyde, methyl β-formylisobu-tyrate. Such catalyst also showed high stability during the reaction and could be used repeat-edly.     

HAlMCM-41介孔分子筛催化1,3-苯并二噁茂烷合成的研究

研究了HAlMCM-41分子筛催化邻苯二酚与环己酮、丁酮、丙酮、丙醛、丁醛、异丁醛、戊醛、正己醛、正辛醛、苯甲醛、二苯甲酮等十余种醛(酮)的缩合反应. 考察了反应时间、酚与醛(酮)的配比、HAlMCM-41分子筛用量、硅铝比、催化剂重用次数等因素对邻苯二酚与醛(酮)反应的影响. 结果表明, 当邻苯二酚与醛(酮)物质的量比为1∶1.4, 催化剂用量为3.5 g/mol邻苯二酚, 反应4 h, 分子筛n(SiO₂)/n(Al₂O₃)为15时, 选择性一般在99.4%以上, 转化率也一般在85.6%以上, 因此, HAlMCM-41分子筛对邻苯二酚与醛(酮)的反应有较好的催化性能.     

Hydrodeoxygenation of Anisole over Ni/α-Al2O3 Catalyst

Ni-based catalysts supported on di erent supports (α-Al₂O₃,γ-Al₂O₃, SiO2, TiO₂, and ZrO₂) were prepared by impregnation. Effects of supports on catalytic performance were tested using hydrodeoxygenation reaction (HDO) of anisole as model reaction. Ni/α-Al₂O₃ was found to be the highest active catalyst for HDO of anisole. Under the optimal conditions, the anisole conversion is 93.25% and the hydrocarbon yield is 90.47%. Catalyst characteriza-tion using H₂-TPD method demonstrates that Ni/α-Al₂O₃ catalyst possesses more amount of active metal Ni than those of other investigated catalysts, which can enhance the cat-alytic activity for hydrogenation. Furthermore, it is found that the Ni/α-Al₂O₃ catalyst has excellent repeatability, and the carbon deposited on the surface of catalyst is negligible.     

Kinetic studies on the hydrosilylation of phenylacetylene with R3SiH (R3 = PhMe2, Ph2Me,Ph3, Et3) using bis(1,2‐diphenylphosphinoethane)norbornadiene rhodium(I) hexafluorophosphate as catalyst

Product distribution and kinetic studies on the hydrosilylation of phenylacetylene by Ph₃SiH, Ph₂MeSiH, PhMe₂SiH and Et₃SiH were performed using bis‐[1,2‐diphenylphosphinoethane]norbornadienerhodium(I) hexafluorophosphate, 1, as catalyst. Pre‐equilibration of the catalyst with the acetylene produced hydrosilylations, pre‐equilibration with the silane did not. The catalyst showed a pronounced selectivity for cis‐addition to form β‐products, t‐PhCH­CHSiR₃, unlike most hydrosilylation catalysts. The kinetic studies showed a hydrosilylation reaction that is zero order with respect to both acetylene and the silane, with a dependency upon catalyst concentration. The k_obs value is directly influenced by the substituents on the silane: k(PhMe₂SiH) > k (Et₃SiH > k (Ph₂MeSiH) > k (Ph₃SiH). Intercalation of the catalyst in hectorite was not useful, since either no reaction occurred in non‐polar solvents, or extraction of the catalyst occurred in polar solvents to produce the same product distributions. Copyright © 2000 John Wiley & Sons, Ltd.     

Application of the monophase Zr-Mg-Y oxide system as catalyst for gas-phase phenol methylation

The investigation presented attempts to apply the Zr-Mg-Y oxide system as a catalyst for phenol alkylation with methanol by a gas-phase reaction. The studies were carried out in a continuous process performed at atmospheric pressure. It was indicated that the catalyst obtained is active and ortho-selective in the methylation of phenol. At 370°C, in the presence of Zr-Mg-Y oxide catalyst under the experimental conditions studied, an interesting yield of ortho-cresol (over 46% with 66.5% selectivity) was attained. Zr-Mg-Y-O catalyst was prepared by low temperature method and it was characterised by X-ray powder diffraction, scanning microscopy and nitrogen physisorption. In addition, in this reaction the catalytic specificity of Zr-Mg-O, ZrO₂, MgO and Y₂O₃ was examined.     

Preparation and characterization of Al2O3-MgO mixed oxides

A new catalyst system V-Cs-Cu-Tl/TiO₂·SiC for vapor-phase selective oxidation reaction of p-tert-butyltoluene to p-tert-butylbenzaldehyde were studied. It was found that the addition of thallium promoted the reaction. After 365 hours stability test, the V-Cs-Cu-Tl/TiO₂·SiC catalyst still kept excellent result that conversion of p-tert-butyltoluene and the selectivity of p-tert-butylbenzaldehyde reach 10 mol% and 80 mol%. The catalyst was characterized by XRD, TEM, FT-IR and ICP measurements.     

N‐heterocyclic carbene–palladium(II) complex supported on magnetic mesoporous silica for Heck cross‐coupling reaction

Magnetic mesoporous silica was prepared via embedding magnetite nanoparticles between channels of mesoporous silica (SBA‐15). The prepared composite (Fe₃O₄@SiO₂‐SBA) was then reacted with 3‐chloropropyltriethoxysilane, sodium imidazolide and 2‐bromopyridine to give 3‐(pyridin‐2‐yl)‐1H‐imidazol‐3‐iumpropyl‐functionalized Fe₃O₄@SiO₂‐SBA as a supported pincer ligand for Pd(II). The functionalized magnetic mesoporous silica was further reacted with [PdCl₂(SMe₂)₂] to produce a supported N‐heterocyclic carbene–Pd(II) complex. The obtained catalyst was characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, energy‐dispersive X‐ray analysis, vibrating sample magnetometry, Brunauer–Emmett–Teller surface area measurement and X‐ray diffraction. The amount of the loaded complex was 80.3 mg g^?1, as calculated through thermogravimetric analysis. The formation of the ordered mesoporous structure of SBA‐15 was confirmed using low‐angle X‐ray diffraction and transmission electron microscopy. Also, X‐ray photoelectron spectroscopy confirmed the presence of the Pd(II) complex on the magnetic support. The prepared magnetic catalyst was then effectively used in the coupling reaction of olefins with aryl halides, i.e. the Heck reaction, in the presence of a base. The reaction parameters, such as solvent, base, temperature, amount of catalyst and reactant ratio, were optimized by choosing the coupling reaction of 1‐bromonaphthalene and styrene as a model Heck reaction. N‐Methylpyrrolidone as solvent, 0.25 mol% catalyst, K₂CO₃ as base, reaction temperature of 120°C and ultrasonication of the catalyst for 10 min before use provided the best conditions for the Heck cross‐coupling reaction. The best results were observed for aryl bromides and iodides while aryl chlorides were found to be less reactive. The catalyst exhibited noticeable stability and reusability.     

Oxidation of ethylbenzene to styrene oxide in the presence of cellulose‐supported Pd magnetic nanoparticles

Palladium and Fe₃O₄ nanoparticles were deposited on N‐(2‐aminoethyl)acetamide‐functionalized cellulose for use in a catalytic reaction. The catalyst was characterized using Fourier transform infrared spectroscopy, thermogravimetric analysis, X‐ray diffraction, energy‐dispersive X‐ray analysis and transmission electron microscopy, and applied in the oxidation reaction of ethylbenzene at 100 °C using H₂O₂. Styrene oxide was obtained as the sole product of the oxidation reaction during 24 h. This reaction has some advantages such as one‐pot transformation of ethylbenzene to styrene oxide, high yield, excellent selectivity and magnetically recoverable catalyst. Also, the recovered catalyst could be used in the oxidation reaction four times without decrease in yield. Copyright © 2016 John Wiley & Sons, Ltd.     

Green and rapid synthesis of dihydropyrimido [4,5‐b]quinolinetrione derivatives using CoFe2O4@PPA as high efficient solid acidic catalyst under ultrasonic irradiation

A new high efficient and green protocol for the preparation of dihydropyrimido[4,5‐b]quinolinetrione derivatives using magnetically solid acid catalyst was presented. High performance solid acid catalyst was prepared through a three‐step reaction. Firstly, CoFe₂O₄ nano particles were synthesized using co‐precipitation method. In second step, CoFe₂O₄ nano particles were coated with SiO₂ shell through treatment with tetraethyl orthosilicate (CoFe₂O₄@SiO₂). Finaly, CoFe₂O₄@SiO₂ was modified with polyphosphoric acid (CoFe₂O₄@SiO₂/PPA) in a simple manner. Green reusable catalyst was characterized in details using FTIR, VSM, TEM, FESEM, EDX and used as catalyst for the synthesis of dihydropyrimido[4,5‐b]quinolinetrione derivatives. Reaction was performed under ultrasonic irradiation as green, effective and mild conditions and products were achieved in high to excellent yields. Green and eco‐friendly conditions, short reaction times with high yield of products in addition to easy workup are some merits of presented method.     

TiCl2(OTf)-SiO2: A solid stable lewis acid catalyst for Michael addition of α-Aminophosphonates,Amines, Indoles and Pyrrole

TiCl₂(OTf)-SiO₂ is simply prepared by immobilization of TiCl₃(OTf) on silica gel surface and introduced as a non-hygroscopic Lewis acid catalyst for C-N and C-C bond formation via Michael addition reaction. A variety of structurally diverse nitrogen nucleophiles including α-aminophosphonates, aliphatic and aromatic amines and imidazole were evaluated as Michael donors. Friedel–Crafts alkylation of indoles and pyrrole was also investigated through Michael addition reaction in the presence of TiCl₂(OTf)-SiO₂ as a catalyst. The reactions were conducted at room temperature or 60 °C under solvent-free conditions and the desired Michael adducts were obtained in high to excellent yields.     

Preparation of hydrogenated nitrile rubber using palladium acetate catalyst: Its characterization and kinetics

Hydrogenated nitrile rubber was prepared by using palladium acetate as the homogeneous catalyst system. The effect of different reaction parameters on the level of hydrogenation was studied. The extent of hydrogenation increased with increase in reaction time, temperature, pressure, and catalyst concentration. A maximum conversion of 96% could be achieved. The degree of hydrogenation was estimated from IR and NMR spectroscopy. The selectivity of the catalyst in reducing ? C?C? in presence of ? C?N was supported by IR and ¹³C-NMR spectra. ESCA studies further confirmed this observation. Properties of hydrogenated nitrile rubber were investigated by various techniques such as gel permeation chromatography (GPC), glass transition temperature (T_g), stress-strain behavior and rheological measurements. GPC studies showed no significant change in molecular weights of the products after the reaction. T_g value decreased with an increase in the level of hydrogenation. The ultimate stress improved significantly with the increase in the extent of hydrogenation. The die swell decreased with hydrogenation at a particular shear rate. The kinetics of the NBR hydrogenation were investigated. With the increase of the hydrogen pressure and catalyst concentration, the rate of the reaction increased. The reaction was apparently first order with respect to olefinic substrate at higher hydrogen pressure. The apparent activation energy, enthalpy, and entropy of the reaction were calculated as 29.9 kJ/mol, 27.42 kJ/mol, and –0.20 kJ mol^?1 K^?1, respectively.     

Fe3O4@SiO2@D-NHCS-Tr as an efficient and reusable catalyst for the synthesis of indol-3-yl-4H-chromene via a multi-component reaction under solvent-free conditions

Fe₃O₄@SiO₂@D-NHCS-Tr was used as an efficient catalyst in the three-component reaction between indole derivatives, salicylaldehyde, and active methylene compounds under solvent-free conditions to the synthesis of indol-3-yl-4H-chromene derivatives. The features of this method include the green conditions of the reaction, easy separation, eco-friendly and cost-effectiveness of the catalyst, and high yield in short reaction times.     

用原位红外技术研究Ag-MoO3/ZrO2催化丙烯气相环氧化反应

制备了对丙烯直接气相环氧化具有优良催化性能的Ag-MoO₃/ZrO₂催化剂, 采用原位FT-IR技术研究了丙烯、环氧丙烷及丙烯和氧气混合气在载体和催化剂上的吸附及反应行为. 研究表明, 丙烯在ZrO₂载体和20%Ag-4%MoO₃/ZrO₂催化剂上吸附后, 均不发生化学反应, 而环氧丙烷在ZrO₂载体上吸附后于400 ℃发生开环反应, 在20%Ag-4%MoO₃/ZrO₂催化剂上吸附后于300 ℃发生开环反应. 当丙烯和氧气混合气在ZrO₂载体上共吸附后, 随着反应温度从室温升高至400 ℃, 二者开始反应生成CO₂和H₂O; 混合气在20%Ag-4%MoO₃/ZrO₂催化剂上共吸附后于350 ℃开始反应. 对比非负载型Ag-MoO₃催化剂的研究结果可见, ZrO₂载体的存在使催化剂的活性下降的同时, 提高了对产物环氧丙烷的选择性.     

Aqueous/organic biphasic hydroformylation of 1‐octene catalyzed by Co2(CO)8/Ph2P(CH2CH2O)nMe

The aqueous/organic biphasic hydroformylation of 1‐octene catalyzed by Co₂(CO)₈/Ph₂P(CH₂CH₂O)_nMe, an in situ formed thermoregulated phase‐transfer cobalt catalyst, has been developed. The catalyst activity in this biphasic system was as high as that in the homogeneous system. The yield of oxo‐products was 93% when the reaction was carried out at 180 °C and under 4.0 MPa syngas pressure for 20 h. The catalyst could be easily recovered in the aqueous phase by decanting after the reaction system was cooled, and reused in consecutive reaction without any treatment. The loss of Co in the organic phase was less than 1% on average of five successive runs. Copyright © 2012 John Wiley & Sons, Ltd.     

Nitro group reduction and Suzuki reaction catalysed by palladium supported on magnetic nanoparticles modified with carbon quantum dots generated from glycerol and urea

Glycerol and urea were used as green and cheap sources of carbon quantum dots (CQD) for modifying Fe₃O₄ nanoparticles (NPs). The obtained CQD@Fe₃O₄ NPs were used for the stabilization of palladium species and the prepared catalyst, Pd@CQD@Fe₃O₄, was characterized using various techniques. This magnetic supported palladium was applied as an efficient catalyst for the reduction of aromatic nitro compounds to primary amines at room temperature using very low palladium loading (0.008 mol%) and also for the Suzuki–Miyaura cross‐coupling reaction of aryl halides as well as challenging heteroaryl bromides and aryl diazonium salts with arylboronic acids and with potassium phenyltrifluoroborate. This magnetically recyclable catalyst was recovered and reused for seven consecutive runs in the reduction of 4‐nitrotoluene to p‐toluidine and for ten consecutive runs in the reaction of 4‐iodoanisole with phenylboronic acid with small decrease of activity. The catalyst reused in the Suzuki reaction was characterized using transmission electron microscopy, vibrating sample magnetometry and X‐ray photoelectron spectroscopy. Using experiments such as hot filtration and poisoning tests, it has been shown that the true catalyst works under homogeneous conditions according to the release–return pathway of active palladium species.     

酸功能化-温控型三元杂多酸离子液体的合成、表征及其酯催化性能

采用酸化-乙醚萃取法制备了不同钒取代数目的 Keggin结构的磷钨钒杂多酸,并进一步通过离子交换法合成了磺酸功能化的杂多酸离子液体催化剂,采用核磁、元素分析、红外、紫外、X射线衍射、热重-差示扫描、电位滴定等分析手段对所得样品进行了表征,考察了所得样品对氯乙酸和正戊醇的酯化反应性能和重复使用性能。结果表明,所制备的杂多酸离子液体是一种具有温度响应特性的无定型结构化合物,仍保留Keggin结构和较高的酸强度,该催化剂在反应温度下与反应物形成一相,而反应结束温度降低后,催化剂和产物又形成两相,通过简单的倾倒法就可以快速分离催化剂和反应产物。与杂多酸以及未磺酸化的杂多酸离子液体相比,磺酸功能化的杂多酸离子液体具有更高的酯催化活性。在优化的反应条件下,[PyPS]4PW11VO40(PyPS为1-(3-磺酸基)丙基吡啶)对氯乙酸的转化率可达到97.6%,重复使用4次后转化率为91.9%,而催化剂的结构未有明显变化。     

Efficient and Green Synthesis of N‐aryl Pyrroles Catalyzed by Ionic Liquid [H‐NMP][HSO4] in Water at Room Temperature

A suitable and efficient method for the synthesis of N‐aryl pyrroles by using 2,5‐dimethoxy tetrahydrofuran and several primary aromatic amines in the presence of the catalytic amount of [H‐NMP][HSO₄] under room temperature was described. This method has the advantages such as; easy reaction workup, absolutely separated of catalyst from the reaction mixture and smoothly recyclability of catalyst. In this reaction, N‐substituted pyrroles were obtained as desired products in excellent yields and short reaction times via green and one‐pot procedure.     

Catalytic synthesis of methylene diphenyl dicarbamate from methyl phenyl carbamate and trioxane over sulfuric acid catalyst

Methylene diphenyl dicarbamate (MDC) was synthesized from methyl phenyl carbamate (MPC) and trioxane using sulfuric acid (H₂SO₄) as catalyst. The effects of reaction temperature, reaction time, molar ratio of reactants and the content of catalyst have been studied in details. The results showed that H₂SO₄ exhibited high catalytic activity with the merits of moderate reaction velocity. Under the conditions of n(MPC)/n(trioxane) = 3:1, reaction temperature of 95°C, reaction time of 3.5 h and 30% H₂SO₄, the conversion of MPC reached 99.0% with the selectivity of MDC 81.6%. Moreover, the H₂SO₄ catalyst was reused five times without obviously activity decrease. Based on the identification of byproducts, a possible reaction mechanism was proposed.