Impregnated copper ferrite on mesoporous graphitic carbon nitride: An efficient and reusable catalyst for promoting ligand‐free click synthesis of diverse 1,2,3‐triazoles and tetrazoles

Magnetic CuFe₂O₄/g‐C₃N₄ hybrids were synthesized through a facile method and their catalytic performances were evaluated in click chemistry for the first time. The structural and morphological characterization of prepared materials was carried out by different techniques such as X‐ray diffraction, high‐resolution transmission electron microscopy, field emission scanning electron microscopy, Fourier infrared spectroscopy, vibrating sample magnetometry, thermogravimetric analysis, and N₂ adsorption–desorption analysis (Brunauer–Emmett–Teller surface area). The utilization of magnetic CuFe₂O₄/g‐C₃N₄ enabled superior performance in the one‐pot azide–alkyne cycloaddition reaction in water using alkyl halides and epoxides as azide precursors without the need of any additional agents. The present system is broad in scope and especially practical for the synthesis of macrocyclic triazoles and also tetrazoles. In addition, the catalytic system highly fulfills the demands of “green click chemistry” with its convenient conditions, especially easy access to a variety of significant products in low catalyst loading and simple work‐up and isolation procedure.     

CoFe2O4@SiO2‐CPTES‐Guanidine‐Cu(II): A novel and reusable nanocatalyst for the synthesis of 2,3‐dihydroquinazolin‐4(1H)‐ones and polyhydroquinolines and oxidation of sulfides

CoFe₂O₄@SiO₂‐CPTES‐Guanidine‐Cu(II) magnetic nanoparticles were synthesized and used as a new, inexpensive and efficient heterogeneous catalyst for the synthesis of polyhydroquinolines and 2,3‐dihydroquinazoline‐4(1H)‐ones and for the oxidation of sulfides. The structure of this nanocatalyst was characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, vibrating sample magnetometry, thermogravimetric analysis, X‐ray diffraction and inductively coupled plasma optical emission spectrometry. Simple preparation, high catalytic activity, simple operation, high yields, use of green solvents, easy magnetic separation and reusability of the catalyst are some of the advantages of this protocol.     

A novel heterogeneous nanocatalyst: 2‐Methoxy‐1‐phenylethanone functionalized MCM‐41 supported Cu(II) complex for C‐S coupling of aryl halides with thiourea

An environmentally friendly copper‐based catalyst supported on 2‐Methoxy‐1‐phenylethanone functionalized MCM‐41 was prepared and characterized by FT‐IR, FE‐SEM, TEM, XRD, EDX, BET and ICP techniques. The catalyst was applied for the C?S cross‐coupling reaction of aryl halides with thiourea. Corresponding products were produced in good yields in aerobic conditions. The catalyst could be recovered and recycled for several times.     

Cu(II) immobilized on mesoporous organosilica as an efficient and reusable nanocatalyst for one‐pot Biginelli reaction under solvent‐free conditions

Cu(II) immobilized on mesoporous organosilica nanoparticles (Cu²⁺@MSNs‐(CO₂^?)₂) has been synthesized, as a inorganic–organic nanohybrid catalyst, through a post‐grafting approach. Its characterization is carried out by Fourier transform infrared spectroscopy (FT‐IR), X‐ray diffraction (XRD), Scanning electron microscopy (SEM), Transmission electron microscopy (TEM), Energy dispersive X‐ray (EDX), Thermogravimetric/differential thermal analyses (TGA‐DTA), and Nitrogen adsorption–desorption analysis. Cu²⁺@MSNs‐(CO₂^?)₂ exhibits high catalytic activity in the Biginelli reaction for the synthesis of a diverse range of 3, 4‐dihydropyrimidin‐2(1H)‐ones, under mild conditions. The anchored Cu(II) could not leach out from the surface of the mesoporous catalyst during the reaction and it has been reused several times without appreciable loss in its catalytic activity.     

Periodic mesoporous silica‐supported Ni(II) organometallic complex as an active and reusable nanocatalyst for water‐medium Sonogashira coupling reaction

Phenyl‐bridged periodic mesoporous organosilicas (PMOs) functionalized with diphenylphosphino (PPh₂‐) ligands were synthesized via a surfactant‐directed self‐assembly approach, and were used as a support to immobilize Ni(II) organometallic complex by coordination interaction. In comparison with Ni‐PPh₂‐SBA‐15 and Ni‐PPh₂‐PMOs(Et) catalysts, the as‐prepared Ni‐PPh₂‐PMOs(Ph) exhibited superior catalytic reactivity and selectivity in water‐medium Sonogashira reaction. A control experiment demonstrated that its high activity could be attributed to the high dispersion of Ni(II) active sites and ordered mesopore channels, which effectively diminished diffusion limitation. Meanwhile, the phenyl organic groups in the support wall enhanced surface hydrophobicity, which promoted the adsorption for organic reactant molecules. Moreover, it displayed almost the same catalytic efficiency with the corresponding homogeneous Ni(PPh₃)₂Cl₂ catalyst and could be used repetitively, which was considered as a more environmentally friendly catalytic process since it simultaneously avoided the use of noble metal active species and toxic organic solvents. Copyright © 2013 John Wiley & Sons, Ltd.     

Application of Cu(Hdmg)2 as a simple and cost‐effective catalyst for the convenient one‐pot reductive acetylation of aromatic nitro compounds

In this article, we have developed a novel and simple one‐pot reductive acetylation of aromatic nitro compounds with sodium borohydride (NaBH₄) in ethyl acetate (EtOAc) under reflux conditions in the presence of the bis(dimethylglyoximato)copper(II) complex [Cu(Hdmg)₂] as an efficient and cost‐effective copper‐containing catalyst. Notably, using the above‐mentioned one‐pot reaction, the corresponding acetamide derivatives were obtained in high to excellent yields.     

Silica‐supported Cu(II)–quinoline complex: Efficient and recyclable nanocatalyst for one‐pot synthesis of benzimidazolquinoline derivatives and 2H‐indazoles

The synthesis, characterization and catalytic activity of a Cu(II) complex derived from 2‐oxoquinoline‐3‐carbaldehyde Schiff base supported on amino‐functionalized silica are reported. 3‐(1H‐Benzo[d]imidazol‐2‐yl)quinolines containing piperidine, morpholine and phenylpiperazine skeletons at the C‐2 position were formed in good to excellent yields via the one‐pot reaction of 2‐chloroquinoline‐3‐carbaldehyde, benzene‐1,2‐diamines and secondary amines in the presence of the nanocatalyst under mild conditions. Moreover, the nanocatalyst was found to be recyclable for up to seven runs without significant loss of activity. Also, a series of 2H‐indazoles were synthesized by the catalytic condensation of 2‐bromobenzaldehyde, sodium azide and primary amines.     

Anchoring Ni (II) on Fe3O4@tryptophan: A recyclable,green and extremely efficient magnetic nanocatalyst for one‐pot synthesis of 5‐substituted 1H‐tetrazoles and chemoselective oxidation of sulfides and thiols

A green, novel and extremely efficient nanocatalyst was successfully synthesized by the immobilization of Ni as a transition metal on Fe₃O₄ nanoparticles coated with tryptophan. This nanostructured material was characterized using Fourier transform infrared spectroscopy, transmission electron microscopy, scanning electron microscopy, energy‐dispersive X‐ray spectroscopy, thermogravimetric analysis, inductively coupled plasma optical emission spectroscopy, vibrating sample magnetometry and X‐ray diffraction. The prepared nanocatalyst was applied for the oxidation of sulfides, oxidative coupling of thiols and synthesis of 5‐substituted 1H‐tetrazoles. The use of non‐toxic, green and inexpensive materials, easy separation of magnetic nanoparticles from a reaction mixture using a magnetic field, efficient and one‐pot synthesis, and high yields of products are the most important advantages of this nanocatalyst.     

Cu(II) immobilized on guanidinated epibromohydrin‐functionalized γ‐Fe2O3@TiO2 (γ‐Fe2O3@TiO2‐EG‐Cu(II)): A highly efficient magnetically separable heterogeneous nanocatalyst for one‐pot synthesis of highly substituted imidazoles

A simple, efficient and eco‐friendly procedure has been developed using Cu(II) immobilized on guanidinated epibromohydrin‐functionalized γ‐Fe₂O₃@TiO₂ (γ‐Fe₂O₃@TiO₂‐EG‐Cu(II)) for the synthesis of 2,4,5‐trisubstituted and 1,2,4,5‐tetrasubstituted imidazoles, via the condensation reactions of various aldehydes with benzil and ammonium acetate or ammonium acetate and amines, under solvent‐free conditions. High‐resolution transmission electron microscopy analysis of this catalyst clearly affirmed the formation of a γ‐Fe₂O₃ core and a TiO₂ shell, with mean sizes of about 10–20 and 5–10 nm, respectively. These data were in very good agreement with X‐ray crystallographic measurements (13 and 7 nm). Moreover, magnetization measurements revealed that both γ‐Fe₂O₃@TiO₂ and γ‐Fe₂O₃@TiO₂‐EG‐Cu(II) had superparamagnetic behaviour with saturation magnetization of 23.79 and 22.12 emu g^?1, respectively. γ‐Fe₂O₃@TiO₂‐EG‐Cu(II) was found to be a green and highly efficient nanocatalyst, which could be easily handled, recovered and reused several times without significant loss of its activity. The scope of the presented methodology is quite broad; a variety of aldehydes as well as amines have been shown to be viable substrates. A mechanism for the cyclocondensation reaction has also been proposed.     

Supported benzimidazole‐salen Cu(II) complex: An efficient,versatile and highly reusable nanocatalyst for one‐pot synthesis of hybrid molecules

A novel and efficient nanocatalyst consisting of benzimidazole‐salen Cu(II) complex on surface‐modified silica (BS‐Cu(II)@SiO₂) was prepared. The heterogeneous nanocatalyst was characterized by FESEM, TEM, EDX, FT‐IR, XRD, ICP, and TGA. The nanocatalyst was used for the one‐pot synthesis of some target hybrid molecules. An efficient four component C–H bond activation/[3 + 2] cycloaddition and condensation/cyclization/aromatization sequence toward triazole‐benzimidazole derivatives is disclosed. This methodology provides a general and rapid synthetic route to some new triazole‐benzimidazole hybrids under mild reaction conditions. In addition, the heterogeneous nanocatalyst can be easily separated from the reaction mixture and used several times without noticeable leaching or loss of its catalytic activity. We believe this interesting one‐pot reaction as well as benzimidazole‐salen Cu(II) complex pave the way to the design and synthesis of other new hybrid molecules and metal catalysts, respectively.     

Ni(II)‐Adenine complex coated Fe3O4 nanoparticles as high reusable nanocatalyst for the synthesis of polyhydroquinoline derivatives and oxidation reactions

In the present study, Fe₃O₄ nanoparticles were prepared via simple and versatile procedure. Then, a novel and green catalyst was synthesized by the immobilization of Ni on Fe₃O₄ nanoparticles coated with adenine. The activity of this nanostructure compound was examined for the oxidation of sulfides, oxidative coupling of thiols and synthesis of polyhydroquinolines. The prepared catalyst was characterized by Fourier transform infrared spectroscopy (FT‐IR), scanning electron microscopy (SEM), energy‐dispersive X‐ray spectroscopy (EDS), inductively coupled plasma optical emission spectroscopy (ICP‐OES), X‐ray Diffraction (XRD), thermal gravimetric analysis (TGA), and vibrating sample magnetometer (VSM) measurements. This organometallic catalyst was recovered by the assistance of an external magnetic field from the reaction mixture and reused for seven continuous cycles without noticeable change in its catalytic activity.     

Fe3O4‐supported Schiff‐base copper (II) complex: A valuable heterogeneous nanocatalyst for one‐pot synthesis of new pyrano[2,3‐b]pyridine‐3‐carboxamide derivatives

A novel Cu (II) Schiff‐base complex immobilized on core‐shell magnetic Fe₃O₄ nanoparticles (Fe₃O₄@SPNC) was successfully designed and synthesized. The structural features of these nanoparticles were studied and confirmed by using various techniques including FT‐IR spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy‐dispersive X‐ray spectroscopy (EDS), vibrating sample magnetometer (VSM), X‐Ray diffraction (XRD), wavelength dispersive X‐ray spectroscopy (WDX), and inductively coupled plasma (ICP). These newly synthesized nanoparticles have been used as efficient heterogeneous catalytic system for one‐pot multicomponent synthesis of new pyrano[2,3‐b]pyridine‐3‐carboxamide derivatives. Notably, the catalyst could be easily separated from the reaction mixture by using an external magnet and reused for several successive reaction runs with no significant loss of activity or copper leaching. The present protocol benefits from a hitherto unreported MNPs‐immobilized Cu (II) Schiff‐base complex as an efficient nanocatalyst for the synthesis of newly reported derivatives of pyrano[2,3‐b]pyridine‐3‐carboxamide from one‐pot multicomponent reactions.     

Synthesis and characterization of the novel diamine‐functionalized Fe3O4@SiO2 nanocatalyst and its application for one‐pot three‐component synthesis of chromenes

Fe₃O₄@SiO₂@propyltriethoxysilane@o‐phenylendiamine as an environmentally‐benign functionalized silica‐coated magnetic organometallic nanomaterial has been synthesized and characterized by Fourier transforms infrared (FT‐IR) spectroscopy, scanning electron microscopy (SEM) images and energy dispersive X‐ray (EDX) and vibrating sample magnetometer (VSM) analyses. Then, its catalytic activity was investigated for the one‐pot three‐component condensation reaction between dimedone, malononitrile and various substituted aromatic aldehydes to afford the corresponding 2‐amino‐4H‐chromene derivatives under mild reaction conditions. This nanocatalyst can be easily recovered from the reaction mixture by using a magnet and reused for at least five times without significant decrease in catalytic activity.     

A one‐pot green synthesis of 2‐amino‐4H‐benzo[h]chromenes catalyzed by a dioxomolybdenum Schiff base complex supported on magnetic nanoparticles as an efficient and recyclable nanocatalyst

In this work, catalytic performance of a molybdenum Schiff base complex‐supported magnetic support as a nanocatalyst was evaluated for the preparation of 2‐amino‐4H‐benzo[h]chromenes through one‐pot, three component reactions of 1‐naphthol, various aldehydes, and malononitrile under solvent‐free conditions. A promising greener and eco‐friendly method with a short reaction time, high yield of products, and simple work‐up procedure was achieved. The nanocatalyst could be easily separated and regenerated from reaction media by an external magnet and reused at least seven consecutive times with small drops in its catalytic performance.     

Magnetic copper ferrite catalyzed homo‐ and cross‐coupling reaction of terminal alkynes under ambient atmosphere

The application of non‐toxic and magnetically separable nano‐CuFe₂O₄ as an efficient catalyst for oxidative homo‐ and cross‐coupling reaction of terminal alkynes is described. A wide range of symmetrical and unsymmetrical 1,3‐diynes have been synthesized in moderate to good yields under ambient atmosphere. The nano CuFe₂O₄ can be recovered with a magnet and reused at least five consecutive cycles with no appreciable loss of its catalytic activity.     

Functionalized graphene oxide supported copper (I) complex as effective and recyclable nanocatalyst for one‐pot three component synthesis of 1,2,3‐triazoles

Efficient, one pot three‐component reaction of alkyl halides, sodium azide with terminal alkynes can be catalyzed by functionalized graphene oxide with copper(I) under thermal conditions. A series of 1,4‐disubstituted 1,2,3‐triazoles were obtained by this one‐pot strategy. The catalyst was prepared and characterized by Fourier transform infrared spectroscopy (FT‐IR), X‐ray diffraction (XRD), emission scanning electron microscopy (FE‐SEM) and energy dispersive X‐ray (EDX). The catalyst can be reused at least five times without significant deactivation.     

Synthesis and characterization of copper(II) Schiff base complex supported on Fe3O4 magnetic nanoparticles: a recyclable catalyst for the one‐pot synthesis of 2,3‐dihydroquinazolin‐4(1H)‐ones

Fe₃O₄–Schiff base of Cu(II) is found to be a recyclable and heterogeneous catalyst for the rapid and efficient synthesis of various 2,3‐dihydroquinazolin‐4(1H)‐one derivatives from the two‐component condensation of 2‐aminobenzamide and an aldehyde. This reaction is simple, green and cost‐effective. Separation and recycling can also be easily done by magnetic decantation of the Fe₃O₄ nanoparticles with an external magnet. The prepared catalyst was characterized using thermogravimetry, Fourier transform infrared spectroscopy, vibrating sample magnetometry, inductively coupled plasma analysis, X‐ray diffraction and scanning electron microscopy. Copyright © 2015 John Wiley & Sons, Ltd.     

Zinc (II), palladium (II) and cadmium (II) complexes containing 4‐methoxy‐N‐(pyridin‐2‐ylmethylene) aniline derivatives: Synthesis,characterization and methyl methacrylate polymerization

A series of Zn (II), Pd (II) and Cd (II) complexes, [(L) _n MX ₂ ] _m (L = L‐a–L‐c; M = Zn, Pd; X = Cl; M = Cd; X = Br; n, m = 1 or 2), containing 4‐methoxy‐N‐(pyridin‐2‐ylmethylene) aniline ( L‐a ), 4‐methoxy‐N‐(pyridin‐2‐ylmethyl) aniline ( L‐b ) and 4‐methoxy‐N‐methyl‐N‐(pyridin‐2‐ylmethyl) aniline ( L‐c ) have been synthesized and characterized. The X‐ray crystal structures of Pd (II) complexes [L ₁ PdCl ₂ ] (L = L‐b and L‐c) revealed distorted square planar geometries obtained via coordinative interaction of the nitrogen atoms of pyridine and amine moieties and two chloro ligands. The geometry around Zn (II) center in [(L‐a)ZnCl ₂ ] and [(L‐c)ZnCl ₂ ] can be best described as distorted tetrahedral, whereas [(L‐b) ₂ ZnCl ₂ ] and [(L‐b) ₂ CdBr ₂ ] achieved 6‐coordinated octahedral geometries around Zn and Cd centers through 2‐equivalent ligands, respectively. In addition, a dimeric [(L‐c)Cd(μ ‐ Br)Br] ₂ complex exhibited typical 5‐coordinated trigonal bipyramidal geometry around Cd center. The polymerization of methyl methacrylate in the presence of modified methylaluminoxane was evaluated by all the synthesized complexes at 60°C. Among these complexes, [(L‐b)PdCl ₂ ] showed the highest catalytic activity [3.80 × 10⁴ g poly (methyl methacrylate) (PMMA)/mol Pd hr^?1], yielding high molecular weight (9.12 × 10⁵ g mol^?1) PMMA. Syndio‐enriched PMMA (characterized using ¹H‐NMR spectroscopy) of about 0.68 was obtained with T_g in the range 120–128°C. Unlike imine and amine moieties, the introduction of N‐methyl moiety has an adverse effect on the catalytic activity, but the syndiotacticity remained unaffected.     

Construction of a Highly Selective and Sensitive La(III) Sensor Based on N‐(2‐Pyridyl)‐N′‐(4‐methoxyphenyl)‐thiourea for Nano Level Monitoring of La(III) Ions

N‐(2‐Pyridyl)‐N′‐(4‐methoxyphenyl)‐thiourea (PMPT) was found to be a suitable neutral ion carrier for the construction of a highly selective and sensitive La(III) membrane sensor. Poly(vinyl chloride) (PVC) based membranes of PMPT with potassium tetrakis (p‐chlorophenyl) borate (KTpClPB) as an anionic excluder and oleic acid (OA), dibutyl phthalate (DBP), benzyl acetate (BA) and o‐nitrophenyloctyl ether (NPOE) as plasticizing solvent mediators were constructed and investigated as La(III) membrane sensors. A membrane composed of PMPT‐PVC‐KTpClPB‐BA with the ratio 8.0 : 35.0 : 3.0 : 54.0 works well over a very wide concentration range (4.0×10^?8 to 1.0×10^?1 M) with a Nernstian slope of 19.6±0.2 mV per decade of activity between pH values of 4.0 and 9.0. The detection limit of the sensor was calculated to be 2.0×10^?8 M (ca. 3.0 ppb). The sensor displays very good discrimination toward La(III) ions with regard to most common metal ions and lanthanide ions. The proposed sensor shows a short response time for whole concentration range (ca. 12 s). For evaluation of the analytical applicability of the La(III) sensor, it was successfully used as an indicator electrode for the titration of La(III) ions with EDTA. It was also applied to the determination of fluoride content of two mouth wash preparation samples and monitoring of La(III) ions in some binary and ternary mixtures.     

Preparation and characterization of Fe3O4@SiO2/APTPOSS core–shell composite nanomagnetics as a novel family of reusable catalysts and their application in the one‐pot synthesis of 1,3‐thiazolidin‐4‐one derivatives

Octakis[3‐(3‐aminopropyltriethoxysilane)propyl]octasilsesquioxane (APTPOSS) as a polyhedral oligomeric silsesquioxane derivative was prepared and used as a pioneer reagent to obtain a novel core–shell composite using magnetic iron oxide nanoparticles as the core and the inorganic–organic hybrid polyhedral oligomeric silsesquioxane as the shell. Fe₃O₄@SiO₂/APTPOSS were confirmed using Fourier transform infrared spectroscopy, scanning electron microscopy, energy dispersive spectroscopy, dynamic light scattering, thermogravimetric analysis, X‐ray diffraction and vibrating sample magnetometry. The inorganic–organic hybrid polyhedral oligomeric silsesquioxane magnetic nanoparticles were used as an efficient new heterogeneous catalyst for the one‐pot three‐component synthesis of 1,3‐thiazolidin‐4‐ones under solvent‐free conditions. Moreover, these nanoparticles could be easily separated using an external magnet and then reused several times without significant loss of catalytic activity. Copyright © 2016 John Wiley & Sons, Ltd.