Palladium‐anchored multidentate SBA‐15/di‐urea nanoreactor: A highly active catalyst for Suzuki coupling reaction

Modification of mesoporous silica was carried out by reaction of SBA‐15 with di‐urea‐based ligand. Next, with the help of this ligand, palladium ions were anchored within the multidentate SBA‐15/di‐urea pore channels with high dispersion. The SBA‐15/di‐urea/Pd catalyst was characterized using various techniques. Theoretical calculations indicated that each palladium ion was strongly interacted with one nitrogen and two oxygen atoms from the multidentate di‐urea ligand located in SBA‐15 channels and these interactions remained during the catalytic cycle. These results are in good agreement with those of hot filtration test: the palladium ions have very high stability against leaching from the SBA‐15/di‐urea support. The catalytic performance of SBA‐15/di‐urea/Pd nanostructure was examined for the Suzuki coupling reaction of phenylboronic acid and electronically diverse aryl halides under mild conditions with a minimal amount of Pd (0.26 mol%). Compared to previous reports, this protocol afforded some advantages such as short reaction times, high yields of products, catalyst stability without leaching, easy catalyst recovery and preservation of catalytic activity for at least six successive runs.     

Palladium–S‐propyl‐2‐aminobenzothioate immobilized on Fe3O4 magnetic nanoparticles as catalyst for Suzuki and Heck reactions in water or poly(ethylene glycol)

A moisture‐ and air‐stable heterogenized palladium catalyst was synthesized by coordination of palladium with S‐propyl‐2‐aminothiobenzamide supported on Fe₃O₄ magnetic nanoparticles. The prepared nanocatalyst was characterized using Fourier transform infrared, energy‐dispersive X‐ray and inductively coupled plasma atomic emission spectroscopies, X‐ray diffraction, vibrating sample magnetometry, transmission and scanning electron microscopies, dynamic laser scattering and thermogravimetric analysis. This catalyst could be dispersed homogeneously in water or poly(ethylene glycol) and further applied as an excellent nano‐organometal catalyst for Suzuki and Heck reactions. The catalyst was easily separated with the assistance of an external magnet from the reaction mixture and reused for several consecutive runs without significant loss of its catalytic efficiency or palladium leaching. The leaching of catalyst was examined using hot filtration and inductively coupled plasma atomic emission spectroscopy. Also, the effects of various reaction parameters on the Suzuki and Heck reactions are discussed. Copyright © 2016 John Wiley & Sons, Ltd.     

S‐Benzylisothiourea complex of palladium on magnetic nanoparticles: A highly efficient and reusable nanocatalyst for synthesis of polyhydroquinolines and Suzuki reaction

S ‐Benzylisothiourea complex of palladium supported on modified Fe₃O₄ magnetic nanoparticles (Pd‐SBTU@Fe₃O₄) is reported for carbon–carbon coupling through the Suzuki coupling reaction. Also, the synthesis of polyhydroquinoline derivatives is reported in the presence of Pd‐SBTU@Fe₃O₄ as nanocatalyst. The prepared nanoparticles were characterized using Fourier transform infrared spectroscopy, thermogravimetric analysis, scanning electron microscopy, vibrating sample magnetometry and inductively coupled plasma atomic emission spectroscopy. The nanocatalyst was easily recovered using an external magnet and reused several times without significant loss of its catalytic efficiency. The heterogeneity of Pd‐SBTU@Fe₃O₄ was studied using hot filtration.     

Betti base‐modified magnetic nanoparticles as a novel basic nanocatalyst in Knoevenagel condensation and its related palladium nanocatalyst in Suzuki coupling reactions

Betti base‐modified Fe₃O₄ nanoparticles have been successfully designed and synthesized for the first time through the condensation of Fe₃O₄ magnetic nanoparticles coated by (3‐aminopropyl)triethoxysilane with β‐naphthol and benzaldehyde. Their application as a novel magnetic nanocatalyst in the Knoevenagel condensation and also application to immobilization of palladium nanoparticles for Suzuki coupling reactions have been investigated which opens a new field for application of Betti base derivatives in organic transformations. The synthesized inorganic–organic hybrid nanocatalyst has been fully been characterized using Fourier transform infrared, X‐ray diffraction, vibrating sample magnetometry, transmission and scanning electron microscopies, energy‐dispersive X‐ray, wavelength‐dispersive X‐ray and X‐ray photoelectron spectroscopies and inductively coupled plasma techniques. The catalyst was easily separated with the assistance of an external magnet from the reaction mixture and reused for several consecutive runs with no significant loss of its catalytic efficiency. Copyright © 2016 John Wiley & Sons, Ltd.     

An efficient and new protocol for the Heck reaction using palladium nanoparticle‐engineered dibenzo‐18‐crown‐6‐ether/MCM‐41 nanocomposite in water

Palladium nanoparticle‐incorporated mesoporous organosilica (MCM‐41‐Crown.Pd) was synthesized via the grafting of dibenzo‐18‐crown‐6‐ether moieties on the MCM‐41 surface, followed by reaction of the nanocomposite with palladium acetate and then its reduction in ethanol. The cavity of the immobilized dibenzo‐18‐crown‐6 as host material can stabilize the palladium nanoparticles effectively and prevent their aggregation and separation from the surface. The structure of the nanocomposite was characterized using various techniques. The catalytic properties of the nanocomposite in the Heck coupling reaction, one of the most useful transformations in organic synthesis, between aryl halides and olefins in water were also explored. The main advantages of the method are low cost, high yields, easy work‐up and short reaction time. The nanocatalyst can be easily separated from a reaction mixture and was successfully examined for seven runs, with a slight loss of catalytic activity.     

Bio‐assisted synthesized Ag(0) nanoparticles immobilized on SBA‐15/cyclodextrin nanosponge adduct: Efficient heterogeneous catalyst for the ultrasonic‐assisted synthesis of benzopyranopyrimidines

For the first time, SBA‐15/cyclodextrin nanosponge adduct was synthesized through reaction of Cl‐functionalized SBA‐15 and amine‐functionalized cyclodextrin nanosponge (CDNS). This adduct, which benefits from features of both SBA‐15 and CDNS, was then used for immobilization of Ag(0) nanoparticles which were prepared and capped using a bio‐based approach. Ag@CDNS–SBA‐15 was applied as a heterogeneous catalyst for promoting the three‐component reaction of benzaldehydes, 4‐hydroxycoumarin and urea or thiourea under ultrasonic irradiation to furnish benzopyranopyrimidines. The reaction variables were optimized using response surface methodology. The catalytic activity of Ag@CDNS–SBA‐15 was higher than those of Ag@CDNS, Ag@SBA‐15 and Ag@SBA‐15 + CDNS, confirming the contribution of both components to catalysis as well as a synergistic effect between CDNS and SBA‐15. The role of CDNS was to accommodate the substrates and bring them to the vicinity of the Ag(0) nanoparticles. Notably the catalyst was reusable and could be recovered and reused for up to four reaction runs with slight Ag(0) leaching and loss of catalytic activity.     

One‐pot,Three‐component Synthesis of a New Series of 2‐Amino‐4‐aroyl‐5‐oxo‐5,6‐dihydro‐2H‐pyrano[3,2‐c]quinoline‐3‐carbonitrile in the Presence of SBA‐15 as a Nanocatalyst

One‐pot, three‐component reaction of arylglyoxals, malononitrile and 4‐hydroxyquinolin‐2(1H)‐one in the presence of SBA‐15 as a nanocatalyst and using green solvent systems under various temperatures afforded the 2‐amino‐4‐aroyl‐5‐oxo‐5,6‐dihydro‐2H‐pyrano[3,2‐c]quinoline‐3‐carbonitrile derivatives. The best yield (70‐96%) were obtained using 20% mol of SBA‐15 as a nanocatalyst in H2O/EtOH (1:1) at 80 °C. The simplicity of work up procedure, using green solvent system, and good to excellent yields of products are the main advantages of this synthetic strategy.     

Synthesis of magnetically recyclable Fe3O4@[(EtO)3Si–L1H]/Pd(II) nanocatalyst and application in Suzuki and Heck coupling reactions

A Pd(II) Schiff base complex as an efficient and highly heterogeneous catalyst was developed by immobilization of a palladium complex on the surface of modified Fe₃O₄ magnetite nanoparticles. These surface‐modified nanoparticles were characterized using various techniques such as transmission electron microscopy, X‐ray diffraction, thermogravimetric analysis, vibrating sample magnetometry, elemental analysis and Fourier transform infrared spectroscopy. The palladium catalyst exhibited efficient catalytic activity in Suzuki and Heck coupling reactions. This method has notable advantages such as excellent chemoselectivity, mild reaction conditions, short reaction times and excellent yields. The yields of the products were in the range 85–100%. Also, the nanocatalyst can be easily recovered with a permanent magnet and reused at least five times without noticeable leaching or loss of its catalytic activity. Copyright © 2016 John Wiley & Sons, Ltd.     

V‐N‐C catalysts anchored to mesoporous Al‐SBA‐15 with tailorable pore sizes for the synthesis of spirooxindole dihydroquinazolinones derivatives

Heterogeneous nanoscale catalyst was successfully synthesized via anchoring of V‐bis(2‐aminobenzamide) complex on the Al‐SBA‐15. This modified mesoporous was identified by several characterization techniques, such as X‐ray diffraction, field emission‐scanning electron microscopy, Fourier transform‐infrared, Brunauer–Emmett–Teller and transmission electron microscopy. V‐Bis(2‐aminobenzamide)@Al‐SBA‐15 was found to be an efficient heterogeneous catalyst for the rapid and desirable synthesis of various spirooxindole dihydroquinazolinones derivatives. In addition, the heterogeneous nanocatalyst was chemically stabilized in organic and aqueous solutions as well as can be expeditiously reused for at least seven cycles without a significant loss in catalytic activity.     

Efficient synthesis of 5‐substituted tetrazoles catalysed by palladium–S‐methylisothiourea complex supported on boehmite nanoparticles

An efficient and general method is reported for the synthesis of 5‐substituted 1H ‐tetrazole derivatives in the presence of S ‐methylisothiourea complex of palladium immobilized on boehmite nanoparticles (Pd‐SMTU@boehmite) as an efficient and recyclable nanocatalyst. Boehmite nanoparticles were not sensitive to air or moisture and were prepared without inert atmosphere in water at room temperature. Then a novel type of phosphine‐free palladium complex was immobilized on these nanoparticles. This catalyst was characterized using Fourier transform infrared, thermogravimetric, Brunauer–Emmett–Teller, transmission and scanning electron microscopic, energy‐dispersive X‐ray spectroscopic, X‐ray diffraction and inductively coupled plasma optical emission spectroscopic techniques. The catalyst was reused several times without palladium leaching or change in its structure.     

Palladium nanoparticles‐decorated triethanolammonium chloride ionic liquid‐modified TiO2 nanoparticles (TiO2/IL‐Pd): A highly active and recoverable catalyst for Suzuki–Miyaura cross‐coupling reaction in aqueous medium

In this work, an easily obtained procedure was successfully implemented to prepare novel palladium nanoparticles decorated on triethanolammonium chloride ionic liquid‐functionalized TiO₂ nanoparticles [TiO₂/IL‐Pd]. Different methods were carried out for characterizations of the synthesized nanocatalyst (HR‐TEM, XPS, XRD, FE‐SEM, EDX, FT‐IR and ICP). TiO₂/IL‐Pd indicated good catalytic activity for the Suzuki–Miyaura cross‐coupling reaction of arylboronic acid with different aryl halides in aqueous media at ambient temperature. The recycled catalyst was investigated with ICP to amount of Pd leaching after 6 times that had diminished slightly, Thus, was confirmed that the nanocatalyst has a good sustainability for C–C Suzuki–Miyaura coupling reaction. The catalyst can be conveniently separated by filtration of the reaction mixture and reused for 6 times without significant loss of its activity. It supplies an environmentally benign alternative path to the existing protocols for the Suzuki–Miyaura reaction.     

Preparation and characterization of a silica‐based magnetic nanocomposite and its application as a recoverable catalyst for the one‐pot multicomponent synthesis of quinazolinone derivatives

An environmentally benign magnetic silica‐based nanocomposite (Fe₃O₄/SBA‐15) as a heterogeneous nanocatalyst was prepared and characterized using Fourier transform infrared and ultraviolet–visible diffuse reflectance spectroscopies, scanning electron microscopy, X‐ray diffraction, vibrating sample magnetometry and Brunauer–Emmett–Teller multilayer nitrogen adsorption. Its catalytic activity was investigated for the one‐pot multicomponent synthesis of 2,3‐dihydroquinazolin‐4(1H)‐ones starting from isatoic anhydride, ammonium acetate and various aldehydes under mild reaction conditions and easy work‐up procedure in refluxing ethanol with good yields. The nanocatalyst can be recovered easily and reused several times without significant loss of catalytic activity. Copyright © 2015 John Wiley & Sons, Ltd.     

Magnetically recoverable 2-(aminomethyl)phenols-modified nanoparticles as a catalyst for Knoevenagel condensation and carrier for palladium to catalytic Suzuki coupling reactions

A class of magnetic nanoparticles modified by 2-(aminomethyl)phenols has been successfully designed and synthesized as a reusable catalyst for Knoevenagel reaction. What's more, such nanomaterial also proved as suitable carrier for immobilization of palladium nanoparticles and the obtained composite exerted potent catalytic activity in Suzuki coupling reactions. Both of the (aminomethyl)phenols-modified nanoparticles and its related palladium nanocatalyst could be easily separated and reused for several consecutive runs by magnetic decantation without significant loss of their catalytic efficiency.     

Fabrication of covalently functionalized mesoporous silica core–shell magnetite nanoparticles with palladium(II) acetylacetonate: application as a magnetically separable nanocatalyst for Suzuki cross‐coupling reaction of acyl halides with boronic acids

We report the preparation of supported palladium(II) acetylacetonate, Pd(acac)₂, coordinated by pendant acac groups, by reacting palladium acetate with acac‐functionalized doubly silica‐coated magnetic nanoparticles. The solid support consists of an amorphous silica‐coated (as magnetite protecting layer) magnetite core and a mesoporous silica shell. The magnetically separable palladium nanocatalyst is active for Suzuki cross‐coupling reaction of acyl halides with boronic acids. The catalyst is simply isolated from the reaction mixture that allows fast and efficient isolation of product and catalyst compared to traditional methods that generally make use of time‐ and solvent‐consuming procedures. Copyright © 2015 John Wiley & Sons, Ltd.     

SBA‐15‐functionalized melamine–pyridine group‐supported palladium(0) as an efficient heterogeneous and recyclable nanocatalyst for N‐arylation of indoles through Ullmann‐type coupling reactions

SBA‐15‐functionalized melamine–pyridine group‐supported palladium(0) was found to serve as a heterogeneous and recyclable nanocatalyst for N‐arylation of indoles with aryl iodides under a low catalyst loading (0.3 mol% of Pd) through Ullmann‐type C? N coupling reactions. A variety of aryl iodides could be aminated to provide the N‐arylated products in good to excellent yields without the need of an inert atmosphere. Also, this catalyst was found to be an efficient system for the N‐arylation of other nitrogen‐containing heterocycles with aryl iodides. The heterogeneous palladium catalyst could be recovered by simple filtration of the reaction solution and reused for six cycles without significant loss in its activity. Copyright © 2015 John Wiley & Sons, Ltd.     

Novel palladium nanoparticles supported on β‐cyclodextrin@graphene oxide as magnetically recyclable catalyst for Suzuki–Miyaura cross‐coupling reaction with two different approaches in bio‐based solvents

A novel nanocatalyst was designed and prepared. Initially, the surface of magnetic graphene oxide (M‐GO) was modified using thionyl chloride, tris(hydroxymethyl)aminomethane and acryloyl chloride as linkers which provide reactive C═C bonds for the polymerization of vinylic monomers. Separately, β‐cyclodextrin (β‐CD) was treated with acryloyl chloride to provide a modified β‐CD. Then, in the presence methylenebisacrylamide as a cross‐linker, monomers of modified β‐CD and acrylamide were polymerized on the surface of the pre‐prepared M‐GO. Finally, palladium acetate and sodium borohydride were added to this composite to afford supported palladium nanoparticles. This fabricated nanocomposite was fully characterized using various techniques. The efficiency of this easily separable and reusable heterogeneous catalyst was successfully examined in Suzuki–Miyaura cross‐coupling reactions of aryl halides and boronic acid as well as in modified Suzuki–Miyaura cross‐coupling reactions of N‐acylsuccinimides and boronic acid in green media. The results showed that the nanocatalyst was efficient in coupling reactions for direct formation of the corresponding biphenyl as well as benzophenone derivatives in green media based on bio‐based solvents. In addition, the nanocatalyst was easily separable, using an external magnet, and could be reused several times without significant loss of activity under the optimum reaction conditions.     

Excellent alkene epoxidation catalytic activity of macrocyclic‐based complex of dioxo‐Mo(VI) on supermagnetic separable nanocatalyst

A phenoxybutane‐based Schiff base complex of cis‐dioxo‐Mo(VI) was supported on paramagnetic nanoparticles and characterized using powder X‐ray diffraction, infrared, diffuse reflectance and atomic absorption spectroscopies, scanning and transmission electron microscopies and vibrating sample magnetometry. The separable nanocatalyst was tested for the selective epoxidation of cyclohexene, cyclooctene, styrene, indene, α‐pinene, 1‐octene, 1‐heptene, 1‐dodecene and trans‐stilbene using tert‐butyl hydroperoxide (80% in di‐tert‐butyl peroxide–water, 3:2) as oxidant in chloroform. The catalyst was efficient for oxidation of cyclooctene with 100% selectivity for epoxidation with 98% conversion in 10 min. We were able to separate magnetically the nanocatalyst using an external magnetic field and used the catalyst at least six successive times without significant decrease in conversion. The turnover frequency of the catalyst was remarkable (2556 h^?1 for cyclooctene). The proposed nanomagnetic catalyst has advantages in terms of catalytic activity, selectivity, catalytic reaction time and reusability by easy separation.     

Prefunctionalized Porous Organic Polymers: Effective Supports of Surface Palladium Nanoparticles for the Enhancement of Catalytic Performances in Dehalogenation

Three porous organic polymers (POPs) containing H, COOMe, and COO^? groups at 2,6‐bis(1,2,3‐triazol‐4‐yl)pyridyl (BTP) units (i.e., POP‐1, POP‐2, and POP‐3, respectively) were prepared for the immobilization of metal nanoparticles (NPs). The ultrafine palladium NPs are uniformly encapsulated in the interior pores of POP‐1, whereas uniform‐ and dual‐distributed palladium NPs are located on the external surface of POP‐2 and POP‐3, respectively. The presence of carboxylate groups not only endows POP‐3 an outstanding dispersibility in H₂O/EtOH, but also enables the palladium NPs at the surface to show the highest catalytic activity, stability, and recyclability in dehalogenation reactions of chlorobenzene at 25 °C. The palladium NPs on the external surface are effectively stabilized by the functionalized POPs containing BTP units and carboxylate groups, which provides a new insight for highly efficient catalytic systems based on surface metal NPs of porous materials.     

Preparation of choline chloride–urea deep eutectic solvent‐modified magnetic nanoparticles for synthesis of various 2‐amino‐4H‐pyran derivatives in water solution

A novel hybrid magnetic nanocatalyst was synthesized by covalent coating of Fe₃O₄ magnetic nanoparticles with choline chloride–urea deep eutectic solvent using 3‐iodopropyltrimethoxysilane as a linker. The structure of this new catalyst was fully characterized via elemental analysis, transmission and scanning electron microscopies, X‐ray diffraction and Fourier transform infrared spectroscopy. It was employed in the synthesis of various 2‐amino‐4H ‐pyran derivatives in water solution via an easy and green procedure. The desired products were obtained in high yields via a three‐component reaction between aromatic aldehyde, enolizable carbonyl and malononitrile at room temperature. The employed nanocatalyst was easily recovered using a magnetic field and reused four times (in subsequent runs) with less than 8% decrease in its catalytic activity.     

Chloroaluminate ionic liquid‐modified silica‐coated magnetic nanoparticles: Efficient and reusable catalyst for selective synthesis of mono‐ and bis‐dihydropyrano[3,2‐b]chromenediones

The synthesis, characterization and catalytic activity of chloroaluminate ionic liquid‐modified silica‐coated magnetic nanoparticles ([SiPrPy]AlCl₄@MNPs) are described. The prepared magnetic nanocatalyst was characterized using Fourier transform infrared spectroscopy, elemental analysis, vibrating sample magnetometry, scanning and transmission electron microscopies, X‐ray diffraction and inductively coupled plasma analysis. The results showed that the ionic liquid had been successfully immobilized onto the magnetic support, and the resulting nanoparticles exhibited high catalytic activity for the synthesis of a diverse range of dihydropyrano[3,2‐b ]chromenediones via a one‐pot, three‐component and solvent‐free reaction of aromatic aldehydes, 1,3‐diones and kojic acid. This catalytic system also showed excellent activity in the selective synthesis of mono‐ and bis‐dihydropyrano[3,2‐b ]chromenediones from dialdehydes. The procedure gave the products in excellent yields and in very short reaction times. Moreover, the catalyst could be reused eight times without loss of its catalytic activity.