Are N‐substituted glycine N‐thiocarboxyanhydride monomers really hard to polymerize?

N‐Substituted glycine N‐thiocarboxyanhydrides (NNTAs) are promising cyclic monomers to synthesize polypeptoids with the advantages of easier preparation and higher stability during purification and storage than N‐substituted glycine N‐carboxyanhydrides (NNCAs). NNTAs were commonly considered too stable to polymerize for their low reactivity. In this contribution, we report controlled polymerizations of N‐ethylglycine NTA (NEG‐NTA) and sarcosine NTA (Sar‐NTA) using primary amines as initiator under proper polymerization conditions. The controllability has been fully supported by ¹H NMR end group analyses, MALDI‐ToF mass spectra, kinetic data, block copolymerizations by sequential monomer addition, and low polydispersities (1.14–1.17) of polypeptoids. Variation of the [NNTA]/[initiator] ratio allows well control of the molar mass, and degrees of polymerization (DPs) up to 287 can be reached for poly(N‐ethylglycine) or DPs up to 262 for polysarcosine. NNTAs exhibit excellent activity and they are potential to synthesize polypeptoids with controllable polymerization. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 404–410     

N‐heterocyclic carbene–palladium complexes for Suzuki–Miyaura coupling reaction with benzyl chloride and aromatic boronic acid leading to diarylmethanes

A family of N‐heterocyclic carbene–palladium(II)–N,N‐dimethylbenzylamine complexes ((NHC)LPdCl₂; L = N,N‐dimethylbenzylamine) were synthesized as well as characterized using single‐crystal X‐ray diffraction and spectroscopic data. These complexes exhibited higher catalytic activities for the Suzuki reaction of benzyl chlorides to afford diarylmethanes under milder conditions than other efficient (NHC)LPdCl₂ complexes. Using the optimum conditions, the expected coupling products were obtained in moderate to high yields. All reactions were carried out in air and all starting materials were used as supplied without purification.     

Nickel‐substituted cobalt ferrite nanoparticles supported on arginine‐modified graphene oxide nanosheets: Synthesis and catalytic activity

The amino acid arginine was used to modify the surface of graphene oxide nanosheets and then nickel‐substituted cobalt ferrite nanoparticles were supported on those arginine‐grafted graphene oxide nanosheets (Ni_0.5Co_0.5Fe₂O₄@Arg–GO). The prepared Ni_0.5Co_0.5Fe₂O₄@Arg–GO was characterized using flame atomic absorption spectroscopy, inductively coupled plasma optical emission spectrometry, energy‐dispersive spectroscopy, Fourier transform infrared spectroscopy, ultraviolet–visible spectroscopy, Raman spectroscopy, X‐ray diffraction, thermogravimetric analysis, scanning electron microscopy and transmission electron microscopy. The application of Ni_0.5Co_0.5Fe₂O₄@Arg–GO as a catalyst was examined in a one‐pot tandem oxidative cyclization of primary alcohols with o ‐phenylenediamine to benzimidazoles under aerobic oxidation conditions. The results showed that 2‐phenylbenzimidazole derivatives were successfully achieved using Ni_0.5Co_0.5Fe₂O₄@Arg–GO nanocomposite catalyst via the one‐pot tandem oxidative cyclization strategy.     

Catalytic activities in direct arylation of novel palladium N‐heterocyclic carbene complexes

Eight novel palladium N‐heterocyclic carbene (Pd‐NHC) complexes were synthesized by the reaction of chloro 1,3‐dialkylbenzimidazolin‐2‐ylidene silver(I) complexes with bis(benzonitrile)palladium(II) chloride in dichloromethane. These eight Pd‐NHC complexes are as follows: bis[1‐phenyl‐3‐(2,4,6‐trimethylbenzyl)benzimidazol‐2‐ylidene]dichloropalladium(II), bis[1‐phenyl‐3‐(2,3,5,6‐tetramethylbenzyl)benzimidazol‐2‐ylidene]dichloropalladium(II), bis[1‐phenyl‐3‐(2,3,4,5,6‐pentamethylbenzyl)benzimidazol‐2‐ylidene]dichloropalladium(II), bis[1‐phenyl‐3‐(3,4,5‐trimethoxybenzyl)benzimidazol‐2‐ylidene]dichloropalladium(II), bis[1‐(2‐diethylaminoethyl)‐3‐(3‐methylbenzyl)benzimidazol‐2‐ylidene]dichloropalladium(II), bis[1‐(2‐diethylaminoethyl)‐3‐(2,3,5,6‐tetramethylbenzyl)benzimidazol‐2‐ylidene]dichloropalladium(II), bis[1‐(2‐morpholinoethyl)‐3‐naphthalenomethylbenzimidazol‐2‐ylidene]dichloropalladium(II) and bis[1‐(2‐morpholinoethyl)‐3‐(2‐methylbenzyl)benzimidazol‐2‐ylidene]dichloropalladium(II). Also, these synthesized complexes were fully characterized using Fourier transform infrared, ¹H NMR and ¹³C NMR spectroscopic methods and elemental analysis techniques. These synthesized novel Pd‐NHC complexes were tested as catalysts in the direct arylation of 2‐n‐butylthiophene, 2‐n‐butylfuran and 2‐isopropylthiazole with various aryl bromides at 130°C for 1 h. The complexes showed very good catalytic activities in these reactions. Copyright © 2014 John Wiley & Sons, Ltd.     

Cu–N‐heterocyclic carbene‐catalysed synthesis of 2‐aryl‐3‐(arylethynyl)quinoxalines from one‐pot tandem coupling of o‐phenylenediamines and terminal alkynes

A series of new benzimidazolium chlorides bearing N,N′‐benzyl, 2,4,6‐trimethylbenzyl and 2,4,6‐triisopropylbenzyl substituents have been designed and synthesized from various o‐phenylenediamines. Subsequently, corresponding Cu‐based N‐heterocyclic carbenes (NHCs) were generated in situ in the reaction medium which represents a new application of NHCs exploiting distinct catalytic property towards intermolecular cyclization reaction cascade for the synthesis of 2‐aryl‐3‐(arylethynyl)quinoxalines from o‐phenylenediamines and terminal alkynes. The outcome of the cyclization reaction product depends upon the N,N′‐substituents present on the benzimidazolium chlorides.     

(N‐heterocyclic carbene)PdCl(N‐heterocyclic carboxylate) complexes: Synthesis and catalytic activities towards arylation of benzoxazoles with aryl halides

A series of N‐heterocyclic carboxylate‐stabilized N‐heterocyclic carbene palladium complexes have been synthesized and fully characterized. The solid‐state structures indicate that each of the palladium centers is coordinated by an N‐heterocyclic carbene, a chloride and a bidentate N,O‐donor N‐heterocyclic carboxylate ligand. The catalytic performance of the complexes was screened and the results revealed that the complexes exhibit moderate to high catalytic activities for the direct C─H bond arylation of benzoxazoles with aryl bromides.     

Synthesis,structural characterization and catalytic activity of benzimidazole‐functionalized Pd(II) N‐heterocyclic carbene complexes

Two Pd(II)–NHC complexes bearing benzimidazole and pyridine groups have been successfully prepared and fully characterized by NMR and X‐ray diffraction analysis. The structure of palladium complexes are a typical square‐planar with palladium surrounded by two pairs of trans‐arranged benzimidazole and carbene ligands. The Pd–NHC complexes have been proved to be a highly efficient catalyst for the Mizoroki–Heck coupling reaction of aryl halides with various substituted acrylates under mild conditions in excellent yields. Copyright © 2013 John Wiley & Sons, Ltd.     

Ultra‐low‐loading palladium nanoparticles stabilized on nanocrystalline Polyaniline (Pd@PANI): A efficient,green, and recyclable catalyst for the reduction of nitroarenes

Ultra‐low‐loading Pd@PANI nanocomposites (0.048 w.t% Pd) were synthesized via a method that combined interfacial polymerization and in situ composite with camphor sulfonic acid ((+)‐CSA) as a dopant. Transmission electron microscopy (TEM), X‐ray diffraction (XRD), Fourier transform infrared (FTIR) spectra, and X‐ray photoelectron spectroscopy (XPS) were performed to characterize the structures. It can be used as an efficient catalyst for the reduction of nitroarenes in aqueous solution by using a smaller amount of NaBH₄ (2.5 equiv.) at room temperature with high activity (TON = 3.4 × 10³), good stability (cycled eight times), as well as wide applicability (27 substrates). The catalyst also showed a marvelous activity in the gram‐level reaction (yield = 92%). UV–Visible spectrophotometry was used to investigate the reaction kinetics for the reduction of 4‐nitrophenol to 4‐aminophenol, and the results reconfirmed the excellent performance of the catalyst. The unique properties and superior performance of the prepared ultra‐low‐loading Pd@PANI nanocomposites lead it be an attractive alternative catalyst for conventional organic catalytic applications.     

Highly efficient N‐Heterocyclic carbene–palladium complex‐catalyzed multicomponent carbonylative Suzuki reaction: novel practical synthesis of unsymmetric aryl ketones

Highly efficient and chemoselective N‐heterocyclic carbene palladium complexes‐catalyzed multicomponent carbonyltive Suzuki reaction with sodium tetraphenylborate used as phenylating reagent has been demonstrated in this article. Both electron‐rich and electron‐deficient aryl iodides gave unsymmetric aryl ketones in excellent yields. Copyright © 2007 John Wiley & Sons, Ltd.     

Preparation and characterization of N‐methyl‐substituted polyurethane

We prepared N‐methyl‐substituted polyurethanes with different substitution degrees from sodium hydride, methyl p‐toluene sulfonate, and polyether–polyurethane containing poly(oxytetramethylene) glycol, 4,4′‐diphenylmethane diisocyanate, and 1,4‐butanediol. The chemical structures were characterized with Fourier transform infrared and ¹H NMR. To investigate the effects of the N‐substitution degree on the morphology, thermal stability, and mechanical properties, we used differential scanning calorimetry, thermogravimetric analysis, and a universal testing machine. As the substitution degree increased, the new free (1708 cm^?1) and bonded (1650 cm^?1) carbonyl peaks increased. There was no bonded carbonyl peak in fully substituted polyurethane because the urethane groups had no hydrogen. At a small substitution degree, we observed a slight increase in the glass‐transition temperature and decrease in the endotherms of soft‐segment and hard‐segment domains due to the decrease in the hard‐segment domain and the increase in the urethane groups in the soft‐segment domain. The hard‐segment domain decreased and then disappeared as the N‐methyl substitution degree increased. These changes in the morphology resulted (1) in decreased modulus and tensile strength for the films because of the decrease in physical crosslinking points and (2) improved thermal stability as the substitution degree increased. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 4077–4083, 2002     

Threonine stabilizer‐controlled well‐dispersed small palladium nanoparticles on modified magnetic nanocatalyst for Heck cross‐coupling process in water

We report the synthesis of magnetically separable Fe₃O₄@Silica‐Threonine‐Pd⁰ magnetic nanoparticles with a core–shell structure. After synthesis of Fe₃O₄@Silica, threonine as an efficient stabilizer/ligand was bonded to the surface of Fe₃O₄@Silica. Then, palladium nanoparticles were generated on the threonine‐modified catalyst. The threonine stabilizer helps to generate palladium nanoparticles of small size (less than 4 nm) with high dispersity and uniformity. Magnetically separable Fe₃O₄@Silica‐Threonine‐Pd⁰ nanocatalyst was fully characterized using various techniques. This nanocatalyst efficiently catalysed the Heck cross‐coupling reaction of a variety of substrates in water medium as a green, safe and inexpensive solvent at 80°C. The Fe₃O₄@Silica‐Threonine‐Pd⁰ catalyst was used for at least eight successful consecutive runs with palladium leaching of only 0.05%.     

Piperazine‐ and DABCO‐bridged dinuclear N‐heterocyclic carbene palladium complexes: synthesis,structure and application to Hiyama coupling reaction

Four dinuclear N ‐heterocyclic carbene (NHC) palladium complexes were prepared by reaction of imidazolinium salts, PdCl₂ and bridging ligands (piperazine and DABCO) in one pot or by direct cleavage of the chloro‐bridged dimeric compounds [Pd(μ ‐Cl)(Cl)(NHC)]₂ with bridging ligands. All of the complexes were fully characterized using ¹H NMR, ¹³C NMR, high‐resolution mass and infrared spectroscopies, elemental analysis and single‐crystal X‐ray diffraction. The catalytic activities of the obtained palladium catalysts towards Hiyama coupling of aryl chlorides with phenyltrimethoxysilane were investigated and the results showed that the dinuclear palladium complexes were considerably active for the coupling reaction. Copyright © 2016 John Wiley & Sons, Ltd.     

Chelated palladium nanoparticles on the surface of plasma‐treated polyethersulfone membrane for an efficient catalytic reduction of p‐nitrophenol

Herein, a novel method was reported for the use of polyethersulfone (PES) membranes in catalytic reactions with an enhanced distribution and superior catalytic activity of palladium nanoparticles immobilized on the surface of the membranes. For this purpose, the surface of PES membrane was treated with plasma, and subsequently, the consequent oxygen‐containing functional groups were reacted with APTES and 2‐pyridinecarbaldehyde, respectively, to provide sites by which Pd could form complexes. The mean roughness as well as the surface and cross‐sectional morphology were investigated using atomic force microscopy, scanning electron microscopy (SEM), and field‐emission scanning electron microscopy (FESEM), respectively. Furthermore, SEM mapping was used to examine the palladium distribution on the surface of the membranes. Further characterizations of as‐prepared Pd‐loaded PES membranes conducted using EDX, ICP, and XRD analyses. The reduction of p‐nitrophenol to p‐aminophenol was also used as a model reaction to investigate the membranes' performance. The results, analyzed using UV‐Vis instrument, demonstrated that the complete reduction of p‐nitrophenol was achieved at a short time via Pd‐chelated plasma‐treated membrane. Furthermore, the rod‐like and sphere‐like structure of Pd was acquired as a result of palladium chelating with nitrogen‐containing ligands, produced through the reaction between 2‐pyridinecarbaldehyde and (3‐Aminopropyl)triethoxysilane. It was observed that the rod‐like structure of Pd exhibited a trivial catalytic activity in reduction of p‐nitrophenol to p‐aminophenol in contrast with the sphere‐like structure, nonetheless.     

New bis(N‐heterocyclic carbene) palladium complex immobilized on magnetic nanoparticles: as a magnetic reusable catalyst in Suzuki‐Miyaura cross coupling reaction

A new bis(N ‐heterocyclic carbene) (NHC) palladium complex supported on silica coated magnetic nanoparticles (MNPs) was prepared using the reaction of synthesized Pd‐NHC complex with MNPs. The Pd‐NHC complex was prepared using the reaction of a hydroxyl‐functionalized bis‐imidazolium ionic liquid. The Pd‐NHC organometallic complex was used as a heterogeneous recyclable and active catalyst in the Suzuki‐Miyaura reaction and various aryl halides were coupled with arylboronic acids in order to synthesize diverse biaryls in good to excellent yields. The prepared catalyst was characterized by use of some different microscopic and spectroscopic techniques including elemental analysis, FT‐IR spectroscopy, diffuse reflectance UV–Vis spectrophotometery, scanning electron microscopy (SEM), transmission electron microscopy (TEM), vibrating sample magnetometer (VSM) and X‐ray diffraction (XRD). The Pd‐NHC catalyst system is a magnetic reusable catalyst and it can be separated from the reaction mixture using an external magnetic field. The catalyst was reusable in the Suzuki‐Miyaura coupling reaction at least for 6 times without significant decreasing in its catalytic activity.     

Efficient synthesis of 5‐substituted tetrazoles catalysed by palladium–S‐methylisothiourea complex supported on boehmite nanoparticles

An efficient and general method is reported for the synthesis of 5‐substituted 1H ‐tetrazole derivatives in the presence of S ‐methylisothiourea complex of palladium immobilized on boehmite nanoparticles (Pd‐SMTU@boehmite) as an efficient and recyclable nanocatalyst. Boehmite nanoparticles were not sensitive to air or moisture and were prepared without inert atmosphere in water at room temperature. Then a novel type of phosphine‐free palladium complex was immobilized on these nanoparticles. This catalyst was characterized using Fourier transform infrared, thermogravimetric, Brunauer–Emmett–Teller, transmission and scanning electron microscopic, energy‐dispersive X‐ray spectroscopic, X‐ray diffraction and inductively coupled plasma optical emission spectroscopic techniques. The catalyst was reused several times without palladium leaching or change in its structure.     

Synthesis,characterization and catalytic activity in Suzuki–Miyaura coupling of palladacycle complexes with n‐butyl‐substituted N‐heterocyclic carbene ligands

A series of monomeric palladacycle complexes bearing n‐butyl‐substituted N‐heterocyclic carbenes, namely [Pd(NHC)X(dmba)] (dmba: dimethylbenzylamine and [Pd(NHC)X(ppy)]; NHC: 1‐n‐butyl‐3‐substituted benzylimidazol‐2‐ylidene; ppy: 2‐phenylpyridine), were prepared either by transmetallation from the corresponding silver carbene complexes or by the reaction of the corresponding acetate‐bridged palladacycle dimer with N‐heterocyclic carbene ligands in high yields. The palladium(II) complexes were characterized using elemental analyses, APCI‐MS, ¹H NMR and ¹³C NMR spectroscopies. These complexes are efficient in the Suzuki–Miyaura coupling reaction between phenylboronic acid and aryl bromides.     

Comparative study on the enzymatic polymerization of N‐substituted aniline derivatives

A series of water‐soluble N‐substituted poly(alkylanilines) (PNAAs) have been enzymatically synthesized with a variety of groups, from methyl to n‐butyl, such as poly(N‐methylaniline), poly(N‐ethylaniline), poly(N‐butylaniline) and poly(N‐phenylethanolamine). The syntheses were made in the presence of poly(4‐sodium styrene sulfonate) (SPS) as a template and horseradish peroxidase (HRP) as a catalyst. The size and type of the groups have a great effect on the properties of the final polymers. UV‐vis spectroscopy and cyclic voltammetry measurements confirmed that for enzymatically synthesized PNAAs/SPS complexes, the electroactivity increased with the bulkiness of the substituents. These polymers have been studied in the doped and undoped states by FT‐IR and UV‐vis spectroscopy. Also these polymers show multiple and reversible optical transitions that can be ascribed to the formation of polaron and bipolaron states. Copyright © 2005 John Wiley & Sons, Ltd.     

Sulfonated N‐heterocyclic carbine‐silver (I) complexes: Synthesis,characterisation and biological evaluation

The synthesis, characterisation and biological activity of water‐soluble Ag(I)‐NHC complexes, general formula Na[(NHC)AgCl] where NHC is a sulfonated and sterically hindered N‐heterocyclic carbene, is reported. The Ag‐NHC complexes (2a–e) were synthesised by reacting the corresponding sulfonated NHC ligands with Ag₂O in the presence of NaCl or NaBr in methanol/water (1:1) solution. Synthesised silver (I)‐N‐heterocyclic carbene complexes have been characterised by NMR, micro‐analysis and HRMS spectroscopic methods. The IC₅₀ values of these complexes were determined by a proliferation BrdU enzyme‐linked immunosorbent assay (ELISA) against HeLa (human cervix carcinoma), HT29 (human adenocarcinoma) and L929 (mouse fibroblast) cell lines. These complexes have been highlighted as promising and original platforms for building new types of metalodrug. All new water‐soluble Ag(I) complexes demonstrated remarkable cytotoxic activity against HeLa, HT29 and L929 cell lines.     

Structure–activity relationship of N‐heterocyclic carbene–Pd(II)–imidazole complexes in Suzuki–Miyaura coupling between 4‐methoxyphenyl chloride and phenylboronic acid

A series of N‐heterocyclic carbene–PdCl₂–imidazole [NHC–Pd(II)–Im] complexes were synthesized and the structure of most of them was unambiguously determined by X‐ray single‐crystal diffraction. The structure–activity relationship of these complexes was investigated for the Suzuki–Miyaura coupling between 4‐methoxyphenyl chloride and phenylboronic acid, and the effect of the NHCs and Im moieties were fully discussed. The sterically hindered IPr‐based complex showed the highest catalytic activity. Copyright © 2013 John Wiley & Sons, Ltd.     

Engineered mesoporous ionic‐modified γ‐Fe2O3@hydroxyapatite decorated with palladium nanoparticles and its catalytic properties in water

A new mesoporous organic–inorganic nanocomposite was formulated and then used as stabilizer and support for the preparation of palladium nanoparticles (Pd NPs). The properties and structure of Pd NPs immobilized on prepared 1,4‐diazabicyclo[2.2.2]octane (DABCO) chemically tagged on mesoporous γ‐Fe₂O₃@hydroxyapatite (ionic modified (IM)‐MHA) were investigated using various techniques. The synergistic effects of the combined properties of MHA, DABCO and Pd NPs, and catalytic activity of γ‐Fe₂O₃@hydroxyapatite‐DABCO‐Pd (IM‐MHA‐Pd) were investigated for the Heck cross‐coupling reaction in aqueous media. The appropriate surface area and pore size of mesoporous IM‐MHA nanocomposite can provide a favourable hard template for immobilization of Pd NPs. The loading level of Pd in the nanocatalyst was 0.51 mmol g^?1. DABCO bonded to the MHA surface acts as a Pd NP stabilizer and can also lead to colloidal stability of the nanocomposite in aqueous solution. The results reveal that IM‐MHA‐Pd is highly efficient for coupling reactions of a wide range of aryl halides with olefins under green conditions. The superparamagnetic nature of the nanocomposite means that the catalyst to be easily separated from solution through magnetic decantation, and the catalytic activity of the recycled IM‐MHA‐Pd showed almost no appreciable loss even after six consecutive runs.