Hydralazine derivative of aldehyde: A new type of [M − H]+ ion formed in electrospray ionization mass spectrometry

Hydralazine has been widely employed in the development of drugs, derivatization reagents, and ligands. In the present work, we reported a new type of dehydrogenated ion [M ? H]⁺ that was produced from the hydralazine derivative of hexanal in electrospray ionization mass spectrometry (ESI‐MS). The formation of [M ? H]⁺ ions in the ESI‐MS was found to be independent on the mobile phase composition of the liquid chromatography and ESI source parameters. A series of hydralazine derivatives of aldehyde were investigated to confirm this phenomenon. The results showed that hydralazine derivatives of aldehydes that contained an sp³ hybridization carbon with a hydrogen at the α‐position of aldehydes could form the unexpected [M ? H]⁺ ions, whereas hydralazine derivative of acetone could only generate [M + H]⁺ ion in the ESI‐MS. We proposed the possible formation mechanism of [M ? H]⁺ ion for the hydralazine derivatives of aldehydes: the [M ? H]⁺ ion was possibly formed by the loss a hydrogen molecule (H₂) from the protonated ion [M + H]⁺. The results obtained from density functional theory (DFT) calculations supported this proposed formation mechanism of [M ? H]⁺ ion.     

The unusual fragmentation of long‐chain feruloyl esters under negative ion electrospray conditions

Long‐chain ferulic acid esters, such as eicosyl ferulate ( 1 ), show a complex and analytically valuable fragmentation behavior under negative ion electrospay collision‐induced dissociation ((?)‐ESI‐CID) mass spectrometry, as studied by use of a high‐resolution (Orbitrap) mass spectrometer. In a strong contrast to the very simple fragmentation of the [M + H]⁺ ion, which is discussed briefly, the deprotonated molecule, [M – H]^?, exhibits a rich secondary fragmentation chemistry. It first loses a methyl radical (MS²) and the ortho‐quinoid [M – H – Me]^‐? radical anion thus formed then dissociates by loss of an extended series of neutral radicals, C_nH_2n + 1^? (n = 0–16) from the long alkyl chain, in competition with the expulsion of CO and CO₂ (MS³). The further fragmentation (MS⁴) of the [M – H – Me – C₃H₇]^? ion, discussed as an example, and the highly specific losses of alkyl radicals from the [M – H – Me – CO]^‐? and [M – H – Me – CO₂]^‐? ions provide some mechanistic and structural insights.     

Use of a hand-portable gas chromatograph-toroidal ion trap mass spectrometer for self-chemical ionization identification of degradation products related to O-ethyl S-(2-diisopropylaminoethyl) methyl phosphonothiolate (VX)

The chemical warfare agent O-ethyl S-(2-diisopropylaminoethyl) methyl phosphonothiolate (VX) and many related degradation products produce poorly diagnostic electron ionization (EI) mass spectra by transmission quadrupole mass spectrometry. Thus, chemical ionization (CI) is often used for these analytes. In this work, pseudomolecular ([M+H]⁺) ion formation from self-chemical ionization (self-CI) was examined for four VX degradation products containing the diisopropylamine functional group. A person-portable toroidal ion trap mass spectrometer with a gas chromatographic inlet was used with EI, and both fixed-duration and feedback-controlled ionization time. With feedback-controlled ionization, ion cooling (reaction) times and ion formation target values were varied. Evidence for protonation of analytes was observed under all conditions, except for the largest analyte, bis(diisopropylaminoethyl)disulfide which yielded [M+H]⁺ ions only with increased fixed ionization or ion cooling times. Analysis of triethylamine-d₁₅ provided evidence that [M+H]⁺ production was likely due to self-CI. Analysis of a degraded VX sample where lengthened ion storage and feedback-controlled ionization time were used resulted in detection of [M+H]⁺ ions for VX and several relevant degradation products. Dimer ions were also observed for two phosphonate compounds detected in this sample.     

CID of singly charged antioxidants applied in lubricants by means of a 3D ion trap and a linear ion trap-Orbitrap mass spectrometer

The aim of this study was to investigate the fragmentation behavior induced by low‐energy collision‐induced dissociation (LE‐CID) of four selected antioxidants applied in lubricants, by two different types of ion trap mass spectrometers: a three‐dimensional ion trap (3D‐IT) and a linear IT (LIT) Orbitrap MS. Two sterically hindered phenols and two aromatic amines were selected as model compounds representing different antioxidant classes and were characterized by positive‐ion electrospray ionization (ESI) and LE‐CID. Various types of molecular ions (e.g. [M]^+?, [M + H]⁺, [M + NH₄]⁺ or [M + Na]⁺) were used as precursor ions generating a significant number of structurally relevant product ions. Furthermore, the phenolic compounds were analyzed by negative‐ion ESI. For both IT types applied for fragmentation, the antioxidants exhibited the same unusual LE‐CID behavior: (1) they formed stable radical product ions and (2) C? C bond cleavages of aliphatic substituents were observed and their respective cleavage sites depended on the precursor ion selected. This fragmentation provided information on the type of structural isomer usually not obtainable for branched aliphatic substituents utilizing LE‐CID. Comparing the two instruments, the main benefit of applying the LIT‐Orbitrap was direct access to elemental composition of product ions enabling unambiguous interpretation of fragmentation trees not obtainable by the 3D‐IT device (e.g. loss of isobaric neutrals). It should be emphasized that the types of product ions formed do not depend on the type of IT analyzer applied. For characterizing degradation products of antioxidants, the LIT‐Orbitrap hybrid system, allowing the determination of accurate m/z values for product ions, is the method of choice. Copyright © 2011 John Wiley & Sons, Ltd.     

Propane activation by MC5H5 (M = Ni and Co): An experimental and theoretical work

The reactions of MC₅H⁺₅ (M = Ni and Co) with propane in gaseous phase have been studied with an ion trap mass spectrometer; the MC₅H⁺₅ ions are able to activate the propane molecule which undergoes a dehydrogenation reaction. At variance with the reactions of the bare metal ions no loss of methane is observed; the reaction mechanism has been explored by means of DFT calculations and a possible explanation is offered for the different reactivity of these ligated ions.     

Dissociation of disulfide‐intact somatostatin ions: the roles of ion type and dissociation method

The dissociation chemistry of somatostatin‐14 was examined using various tandem mass spectrometry techniques including low‐energy beam‐type and ion trap collision‐induced dissociation (CID) of protonated and deprotonated forms of the peptide, CID of peptide‐gold complexes, and electron transfer dissociation (ETD) of cations. Most of the sequence of somatostatin‐14 is present within a loop defined by the disulfide linkage between Cys‐3 and Cys‐14. The generation of readily interpretable sequence‐related ions from within the loop requires the cleavage of at least one of the bonds of the disulfide linkage and the cleavage of one polypeptide backbone bond. CID of the protonated forms of somatostatin did not appear to give rise to an appreciable degree of dissociation of the disulfide linkage. Sequential fragmentation via multiple alternative pathways tended to generate very complex spectra. CID of the anions proceeded through CH₂? S cleavages extensively but relatively few structurally diagnostic ions were generated. The incorporation of Au(I) into the molecule via ion/ion reactions followed by CID gave rise to many structurally relevant dissociation products, particularly for the [M+Au+H]²⁺ species. The products were generated by a combination of S? S bond cleavage and amide bond cleavage. ETD of the [M+3H]³⁺ ion generated rich sequence information, as did CID of the electron transfer products that did not fragment directly upon electron transfer. The electron transfer results suggest that both the S? S bond and an N? C_α bond can be cleaved following a single electron transfer reaction. Copyright © 2009 John Wiley & Sons, Ltd.     

Probing trapped ion energies via ion-molecule reaction kinetics: Fourier transform ion cyclotron resonance mass spectrometry

The kinetic energy-dependent Ar⁺+ N₂ ion-molecule reaction has been used as a chemical “thermometer” to determine the kinetic energy of ions produced by electron ionization and trapped by using a Fourier transform ion cyclotron resonance (FTICR) mass spectrometer. The rate constant for this reaction obtained on the FTICR mass spectrometer was compared to previous work, which allowed a kinetic energy estimate to be made. In addition, the effects of varying parameters such as trapping voltage and pressure on ion kinetic energy were investigated. No evidence of the differing reactivity of higher energy electronic states of Ar⁺, such as ²P_1/2, was observed and the results of a model of this system are presented that support this observation. Pressure studies revealed that with an average of as few as 13 ion-molecule collisions, Ar⁺ ions are collisionally relaxed to an extent unaffected by additional collisions. Based on recent variable temperature selected ion flow drift tube measurements, FTICR ion energies are estimated to be slightly above thermal.     

Quantification of methylamine in the headspace of ethanol of agricultural origin by selected ion flow tube mass spectrometry

Selected ion flow tube mass spectrometry, SIFT-MS, has been used to investigate if absolute levels of trace compounds in the headspace of ethanol/water vapour mixture can be quantified. This case study was directed towards the analysis of methylamine in distilled ethanol of agricultural origin because of its relevance to quality control legislation in the distillery industry. This has required a detailed study of the ion chemistry occurring – initiated by H₃O⁺ precursor ions – when ethanol/water vapour mixtures are introduced into the H₃O⁺/helium carrier gas swarm and has resulted in the construction of a full scheme of the complex ionic reactions that occur. It has been found that under the SIFT-MS flow reactor conditions (He pressure 130 Pa and temperature 299 K) the terminating ions of the several parallel and sequential reactions that occur are the proton bound ethanol clusters ions, C₂H₅OH₂⁺(C₂H₅OH)_n, with n = 1,2,3, proton bound trimer (n = 2) being the dominant species. These ethanol cluster ions can be used as precursor (reagent) ions for the chemical ionisation of the methylamine present in the ethanol/water vapour, which produces two characteristic product ions CH₃NH₂H⁺(C₂H₅OH)_1,2 that are used for the methylamine analysis. The ratio of the product ion count rate to the precursor ion count rate is used in an analogous way to the routinely used for SIFT-MS analyses to quantify the methylamine concentration. The results of calibration experiments show that using SIFT-MS it is possible to quantify methylamine in liquid ethanol/water mixtures at levels of 0.1 mg/L or greater.     

Gas phase reaction between chromones and solvent in an electrospray ionization source

Chromones were measured by using electrospray ionization mass spectrometry in negative mode. Interestingly, in addition to the deprotonated ion ([M ? H]^?), unexpected [M + 17]^? and [M + 31]^? ions were observed in high intensity when water and methanol were used as the solvent. Chromones with different substitutes were tested. Compared with the deprotonated ion, [M + 17]^? and [M + 31]^? ions were observed with higher abundances when the C‐3 site of chromones was substituted by electron withdrawing groups. Based on high performance liquid chromatography‐mass spectrometry (LC‐MS), deuterium‐labeling and collisional‐induced dissociation experiments, a covalent gas‐phase nucleophilic addition reaction between chromone and water, and the formation of a noncovalent complex between chromone and methanol were proposed as the mechanism for the observed [M + 17]^? and [M + 31]^? ions, respectively. Understanding and using these unique gas phase reactions can avoid misannotation when analyzing chromones and their metabolites.     

A new flowing afterglow-guided ion beam tandem mass spectrometer. Applications to the thermochemistry of polyiodide ions

A new flowing afterglow-guided ion beam tandem mass spectrometer has been constructed. The tandem mass spectrometer has a linear quadrupole-octopole-quadrupole geometry. The apparatus has been successfully tested for the measurement of reaction rates and endothermic reaction thresholds. The new instrument has been used to determine 0 K bond strengths in two polyiodide ions: D(I₂?I^?)=126±6 kJ/mol and D(I₂?I ₃ ^? )=49±6 kJ/mol. These values compare well to recent computational results. Electron affinity (EA)(I₃)=4.15±0.12 eV can be derived from this work and values in the literature.     

Ion/molecule reactions investigated by using tandem mass spectrometry in an ion trap: halomethylation

The ion-trap mass spectrometer has several features which make it a useful device for the study of ion/molecule reactions, viz., the ability to store ions for long periods, mass-selective storage, access to time and pressure-resolved data, and MS/MS capabilities in which the fragmentation behavior of selected ions may give insight into ion structure. These capabilities are used to study the gas-phase halomethylation of a variety of organic compounds with CH₂Cl⁺ as the reagent ion. The ion/molecule reaction of greatest interest involves addition of CH₂Cl⁺, followed by the elimination of HCl, resulting in a net addition of methyne. This methyne-addition reaction is observed in many aromatic compounds as well as such compounds as cycloheptatriene and cyclo-octene. The structures of the product ions were probed using collision-activated dissociation.     

Reactions of C5H5M (M = Fe, Ni) with substituted thiophenes

The ion molecule reactions between C₅H₅M⁺ (M = Fe, Ni) with some substituted thiophenes have been studied in an ion trap mass spectrometer. The reactions of halogen substituted thiophenes lead to the formation of a new C-C bond between the cyclopentadiene ring and the thiophene with the loss of a neutral HX. The reaction mechanism has been investigated by means of DFT calculations and it was found that the insertion of the metal atom in the C-X bond is the key step in the process.     

Relative metal ion affinities of organic nitriles in the gas phase

The relative metal ion (Ni⁺ and Co⁺) affinities of 14 alkanenitriles, alkenenitriles and benzonitrile were estimated using Cooks' kinetic method in a fast atom bombardment mass spectrometer. The results are compared with proton affinities, affinities for other metal ions, two-ligand dissociation enthalpies and the dipole moments of the nitriles. The RCN? Co⁺ bond is found to be close to the RCN? Ni⁺ bond but weaker than the RCN? Al⁺ bond. The effective temperature (T) of the metal-bound dimer ions falls in the range 298 K < T < 400 K.     

Compositional elucidation of heavy petroleum base oil by GC × GC‐EI/PI/CI/FI‐TOFMS

Comprehensive two‐dimensional gas chromatography (GC × GC) coupled to time‐of‐flight mass spectrometry is a powerful separation tool for complex petroleum product analysis. However, the most commonly used electron ionization (EI) technique often makes the identification of the majority of hydrocarbons impossible due to the exhaustive fragmentation and lack of molecular ion preservation, prompting the need of soft‐ionization energies. In this study, three different soft‐ionization techniques including photo ionization (PI), chemical ionization (CI), and field ionization (FI) were compared against EI to elucidate their relative capabilities to reveal different base oil hydrocarbon classes. Compared with EI (70 eV), PI (10.8 eV) retained significant molecular ion (M^+·) information for a large number of isomeric species including branched‐alkanes and saturated monocyclic hydrocarbons along with unique fragmentation patterns. However, for bicyclic/polycyclic naphthenic and aromatic compounds, EI played upper hand by retaining molecular as well as fragment ions to identify the species, whereas PI exhibited mainly molecular ion signals. On the other hand, CI revealed selectivity towards different base oil groups, particularly for steranes, sulfur‐containing thiophenes, and esters, yielding protonated molecular ions (M + H)⁺ for unsaturated and hydride abstracted ions (M‐H⁺) for saturated hydrocarbons. FI, as expected, generated intact molecular ions (M^+·) irrespective to the base oil chemical classes. It allowed elemental composition by TOFMS with a mass resolving power up to 8000 (FWHM) and a mass accuracy of 1 mDa, leading to the calculation of heteroatomic content, double bond equivalency, and carbon number of the compounds. The qualitative and quantitative results presented herein offer a unique perspective into the detailed comparison of different ionization techniques corresponding to several hydrocarbon classes.     

Metastable ion study of substituted cyclopentadienylmanganese cations in the gas phase

The behavior of some substituted cyclopentadienylmanganese ions has been studied by tandem mass spectrometry. This metastable ion study showed that only C₅H₅Mn⁺ and (C₅H₄CN)Mn⁺ ions retain their nido-cluster structure (1), which is characterized by a simple metal-ligand bond cleavage. Other substituted ions, RXC₅H₄Mn⁺, rearrange to a different extent, depending on the nature of the substituent. The first rearrangement step is R radical migration to the central metal atom, leading to RMnC₅H₄X⁺-type ions (2). These ions decompose by elimination of X (for X=CO) or with formation of RMnX⁺, but further rearrangements can also occur. These are the reverse migration of R from the metal atom to the π-ligand (for R=H, Ph) and cyclopentadienyl ring expansion (for X=CH₂). Collisional activation mass spectra contained an Mn⁺ ion peak, which can indicate the existence of stable type 1 structures for most cyclopentadienylmanganese ions. Carboxyl and hydroxymethyl derivatives exist, presumably as ions of type 2. The neutralization-reionization mass spectra of RXC₅H₄Mn⁺ ions are also discussed.     

Dissociative chemistry of ionic transition metal cluster fragments

The ionic fragments formed by collision-induced dissociation of Mn₂(CO) _y ⁺ ions (y=1–10) are reported. The ratio of product ions formed by metal-metal vs. metal-ligand bond cleavage are discussed in terms of the dependence of the metal-metal bond energy on the metal-to-ligand ratio. The collision-induced dissociation data indicate that the metal-metal bond energy of Mn₂(CO) ₅ ⁺ and Mn₂(CO) ₁₀ ⁺ is less than that for Mn₂(CO) _y ⁺ (y=1–4 and 6–9). The product ions arising by metal-metal and metal-ligand bond cleavage reactions for collision-induced dissociation and photodissociation are compared. On the basis of this data and the known photochemistry/photophysics of Mn₂(CO)₁₀, it is proposed that the difference in collision-induced dissociation and photodissociation product ion branching ratios is attributable to spin-orbit transitions of the activated ions.     

Activation of aromatic rings by early transition metal ions in the gas phase. Implications for the metal-catalyzed [2 + 2 + 2] cycloaddition of alkynes and nitriles

The reactions of a series of monocyclic and bicyclic arenes with early transition metal ions (Sc⁺, Y⁺, Nb⁺ and Ta⁺) and their oxides and dioxides were studied in a Fourier transform ion cyclotron resonance mass spectrometer. Ring cleavage of the nitrogen-containing heterocycles results in loss of HCN as the dominant pathway. Thermochemical considerations, secondary reactions and correlations with solution cyclotrimerization reactions indicate that the MC₄H₄⁺ product is a metallacyclopentadiene. Based on correspondence between the reactivities of a series of early metals with their valence electron counts, the reactivities of quinoline and isoquinoline and the decomposition behavior of the products, a metallacycloheptatriene intermediate is proposed for the heteroaromatic ring cleavage reaction. These results are compared to metal complexes in solution which catalyze the [2 + 2 + 2] cyclotrimerization of alkynes and nitriles.     

Gas‐phase fragmentation reactions of protonated benzofuran‐ and dihydrobenzofuran‐type neolignans investigated by accurate‐mass electrospray ionization tandem mass spectrometry

We have investigated gas‐phase fragmentation reactions of protonated benzofuran neolignans (BNs) and dihydrobenzofuran neolignans (DBNs) by accurate‐mass electrospray ionization tandem and multiple‐stage (MSⁿ) mass spectrometry combined with thermochemical data estimated by Computational Chemistry. Most of the protonated compounds fragment into product ions B ([M + H–MeOH]⁺), C ([ B –MeOH]⁺), D ([ C –CO]⁺), and E ([ D –CO]⁺) upon collision‐induced dissociation (CID). However, we identified a series of diagnostic ions and associated them with specific structural features. In the case of compounds displaying an acetoxy group at C‐4, product ion C produces diagnostic ions K ([ C –C₂H₂O]⁺), L ([ K –CO]⁺), and P ([ L –CO]⁺). Formation of product ions H ([ D –H₂O]⁺) and M ([ H –CO]⁺) is associated with the hydroxyl group at C‐3 and C‐3′, whereas product ions N ([ D –MeOH]⁺) and O ([ N –MeOH]⁺) indicate a methoxyl group at the same positions. Finally, product ions F ([ A –C₂H₂O]⁺), Q ([ A –C₃H₆O₂]⁺), I ([ A –C₆H₆O]⁺), and J ([ I –MeOH]⁺) for DBNs and product ion G ([ B –C₂H₂O]⁺) for BNs diagnose a saturated bond between C‐7′ and C‐8′. We used these structure‐fragmentation relationships in combination with deuterium exchange experiments, MSⁿ data, and Computational Chemistry to elucidate the gas‐phase fragmentation pathways of these compounds. These results could help to elucidate DBN and BN metabolites in in vivo and in vitro studies on the basis of electrospray ionization ESI‐CID‐MS/MS data only.     

Does Electron Capture Dissociation Cleave Protein Disulfide Bonds?

Peptide and protein characterization by mass spectrometry (MS) relies on their dissociation in the gas phase into specific fragments whose mass values can be aligned as ‘mass ladders’ to provide sequence information and to localize possible posttranslational modifications. The most common dissociation method involves slow heating of even-electron (M+n H)ⁿ⁺ ions from electrospray ionization by energetic collisions with inert gas, and cleavage of amide backbone bonds. More recently, dissociation methods based on electron capture or transfer were found to provide far more extensive sequence coverage through unselective cleavage of backbone N–Cα bonds. As another important feature of electron capture dissociation (ECD) and electron transfer dissociation (ETD), their unique unimolecular radical ion chemistry generally preserves labile posttranslational modifications such as glycosylation and phosphorylation. Moreover, it was postulated that disulfide bond cleavage is preferred over backbone cleavage, and that capture of a single electron can break both a backbone and a disulfide bond, or even two disulfide bonds between two peptide chains. However, the proposal of preferential disulfide bond cleavage in ECD or ETD has recently been debated. The experimental data presented here reveal that the mechanism of protein disulfide bond cleavage is much more intricate than previously anticipated.