1‐Silacyclopent‐2‐enes and 1‐silacyclohex‐2‐enes bearing functionally substituted silyl groups in 2‐positions. Novel electron‐deficient Si?H?B bridges

The reactions of alkyn‐1‐yl(vinyl)silanes R₂Si[C?C‐Si(H)Me₂]CH?CH₂ [R = Me (1a), Ph (1b)], Me₂Si[C?C‐Si(Br)Me₂]CH?CH₂ (2a), and of alkyn‐1‐yl(allyl)silanes R₂Si[C?C‐Si(H)Me₂]CH₂CH?CH₂ (R = Me (3a), R = Ph (3b)] with 9‐borabicyclo[3.3.1]nonane in a 1:1 ratio afford in high yield the 1‐silacyclopent‐2‐ene derivatives 4a, b and 5a, and the 1‐silacyclohex‐2‐ene derivatives 6a, b, respectively, all of which bear a functionally substituted silyl group in 2‐position and the boryl group in 3‐position. This is the result of selective intermolecular 1,2‐hydroboration of the vinyl or allyl group, followed by intramolecular 1,1‐organoboration of the alkynyl group. In the cases of 4a, b, potential electron‐deficient Si? H? B bridges are absent or extremely weak, whereas in 6a,b the existence of Si? H? B bridges is evident from the NMR spectroscopic data (¹H, ¹¹B, ¹³C and ²⁹Si NMR). The molecular structure of 4b was determined by X‐ray analysis. Copyright © 2005 John Wiley & Sons, Ltd.     

Synthesis and reactivity of metal-containing monomers

Optically active mixed alkoxy orthotitanates with general formula Ti(OR¹)₂(OR²)(OR³) (R¹=Et, Buⁿ; R²=CH₂CH₂OCOC(Me)=CH₂; R³=menthyl, CH(Me)CH₂Me, CH(Ph)CH(NHMe)Me, CH(C₉H₆N)(C₉H₁₄N)) were obtained for the first time by transesterification. The Ti^IV monomers synthesized were characterized by elemental analysis, ozonolysis, and¹H and¹³C NMR and IR spectroscopy. Polymer products with optical activity were obtained by liquid phase radical copolymerization of Ti^IV-containing monomers. For Part 51, see Ref. 1. Deceased. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1739–1743, September, 1999.     

Reactivity of TpMe2‐Supported Yttrium Alkyl Complexes toward Aromatic N‐Heterocycles: Ring‐Opening or CC Bond Formation Directed by CH Activation

Unusual chemical transformations such as three‐component combination and ring‐opening of N‐heterocycles or formation of a carbon–carbon double bond through multiple C–H activation were observed in the reactions of Tp^Me2‐supported yttrium alkyl complexes with aromatic N‐heterocycles. The scorpionate‐anchored yttrium dialkyl complex [Tp^Me2Y(CH₂Ph)₂(THF)] reacted with 1‐methylimidazole in 1:2 molar ratio to give a rare hexanuclear 24‐membered rare‐earth metallomacrocyclic compound [Tp^Me2Y(μ‐N,C‐Im)(η²‐N,C‐Im)]₆ ( 1 ; Im=1‐methylimidazolyl) through two kinds of C–H activations at the C2‐ and C5‐positions of the imidazole ring. However, [Tp^Me2Y(CH₂Ph)₂(THF)] reacted with two equivalents of 1‐methylbenzimidazole to afford a C–C coupling/ring‐opening/C–C coupling product [Tp^Me2Y{η³‐(N,N,N)‐N(CH₃)C₆H₄NHCH?C(Ph)CN(CH₃)C₆H₄NH}] ( 2 ). Further investigations indicated that [Tp^Me2Y(CH₂Ph)₂(THF)] reacted with benzothiazole in 1:1 or 1:2 molar ratio to produce a C–C coupling/ring‐opening product {(Tp^Me2)Y[μ‐η²:η¹‐SC₆H₄N(CH?CHPh)](THF)}₂ ( 3 ). Moreover, the mixed Tp^Me2/Cp yttrium monoalkyl complex [(Tp^Me2)CpYCH₂Ph(THF)] reacted with two equivalents of 1‐methylimidazole in THF at room temperature to afford a trinuclear yttrium complex [Tp^Me2CpY(μ‐N,C‐Im)]₃ ( 5 ), whereas when the above reaction was carried out at 55 °C for two days, two structurally characterized metal complexes [Tp^Me2Y(Im‐Tp^Me2)] ( 7 ; Im‐Tp^Me2=1‐methyl‐imidazolyl‐Tp^Me2) and [Cp₃Y(HIm)] ( 8 ; HIm=1‐methylimidazole) were obtained in 26 and 17 % isolated yields, respectively, accompanied by some unidentified materials. The formation of 7 reveals an uncommon example of construction of a C?C bond through multiple C–H activations.     

Reactivity of Dialumane and “Dialumene” Compounds toward Alkenes

The reactions of dialumane [L(thf)Al? Al(thf)L] ( 1 , L=[{(2,6‐iPr₂C₆H₃)NC(Me)}₂]^2?) with stilbene and styrene afforded the oxidation/insertion products [L(thf)Al(CH(Ph)? CH(Ph))AlL] ( 2 ) and [L(thf)Al(CH(Ph)? CH₂)Al(thf)L] ( 3 ), respectively. In the presence of Na metal, precursor 1 reacted with butadienes, possibly through the reduced “dialumene” or the “carbene‐like” :AlL species, to yield aluminacyclopentenes [LAl(CH₂C(Me)?C(Me)CH₂)Na]_n ( 4 a ) and [Na(dme)₃][LAl(CH₂C(Me)?CHCH₂)] ( 4 b , dme=dimethoxyethane) as [1+4] cycloaddition products, as well as the [2+4] cycloaddition product 1,6‐dialumina‐3,8‐cyclodecadiene, [{Na(dme)}₂][LAl(CH₂C(Me)?C(Me)CH₂)₂AlL] ( 5 ). The possible mechanisms of the cycloaddition reactions were studied by using DFT computations.     

Isospecific Polymerization of Methyl Methacrylate by Intramolecular Rare‐Earth Metal Based Lewis Pairs†

A series of cationic rare‐earth aryloxide complexes, i.e., [LREOAr']⁺[B(C₆F₅)₄]^– (L = CH₃C(NAr)CHC(CH₃)(NCH(R)CH₂PPh₂); RE = Y, Lu; Ar' =2,6‐tBu₂‐C₆H₃, 2,6‐(PhCMe₂)₂‐4‐Me‐C₆H₂; Ar = 2,6‐iPr₂‐C₆H₃, 2,6‐(Ph₂CH)₂‐4‐iPr‐C₆H₂; R = H, CH₃, iPr, Ph), were prepared and applied to the Lewis pair polymerization of methyl methacrylate (MMA). The stereoregularity of the resulting PMMA was significantly affected by the R substituent on the pendant arm of the tridentate NNP ligand, and was found to increase with increase in the steric hindrance of R. When using a Ph group as R, the Y complex produced a highly isotactic polymer with an mm value of 95% and a T_g of 54.6 ^oC. In contrast, the steric hindrance of the Ar and Ar' groups had no effect on the tacticity of the resulting polymer, presumably because these two substituents were situated such that they pointed outward from the cyclic intermediates. Kinetics studies demonstrated that the polymerization was a first‐order process with regard to the monomer concentration prior to catalyst deactivation. End group analysis indicated that the polymerization was accompanied by two possibly competing chain‐termination side reactions that proceeded via intramolecular backbiting cyclization.     

Enol ethers and acetals: acylation with dichloroacetyl,acetyl and benzoyl chloride in ionic liquid medium

Synthesis of 4-alkoxy-1,1-dichloro-3-alken-2-ones [CHCl₂C(O)C(R²)C(R¹)-OR, where R, R¹, R² = Et, H, H; Me, Me, H; Et, H, Me; Me, –(CH₂)₂–; Me, –(CH₂)₃–; Et, Et, H; Et, Bu, H; Et, i-Pr, H; Et, i-Bu, H; Me, Ph, H; Me, thien-2-yl, H] from acylation of enol ethers and acetals with dichloroacetyl chloride, in ionic liquid ([BMIM][BF₄] or [BMIM][PF₆]) is reported. The synthesis of alkenones [R³–C(O)C(R²)C(R¹)-OR], where R/R¹/R²/R³ = Et/H/H/Ph, t-Bu/H/H/Ph, Me/-(CH₂)₄/Ph, Me/-(CH₂)₄/Me] from the reaction of enol ethers with benzoyl chloride or acetyl chloride, in ionic liquid [BMIM][BF₄], is also reported. Last products are described for the first time.     

Investigation of pharmacophore and antipharmacophore features of certain dimethyltin(IV) complexes of flexible N‐protected amino acids and fluorinated β‐diketone/β‐diketones

A set of pentacoordinated dimethyltin(IV) complexes of flexible N‐protected amino acids and fluorinated β‐diketone/β‐diketones was screened for their antibacterial activity against Pseudomonas aeruginosa , Staphylococcus aureus and Streptomyces griseus . These pentacoordinated complexes of the type Me₂SnAB (where : R = CH(CH₃)C₂H₅, A₁H; CH₂CH(CH₃)₂, A₂H; CH(CH₃)₂, A₃H; CH₂C₆H₅, A₄H; and BH = R'C(O)CH₂C(O)R″: R′ = C₆H₅, R″ = CF₃, B₁H; R′ = R″ = CH₃, B₂H; R′ = C₆H₅, R″ = CH₃, B₃H; R′ = R″ = C₆H₅, B₄H) were generated by the reactions of dimethyltin(IV) dichloride with sodium salts of flexible N‐protected amino acids (ANa) and fluorinated β‐diketone/β‐diketones (BNa) in 1:1:1 molar ratio in refluxing dry benzene solution. Plausible structures of these complexes were elucidated on the basis of physicochemical and spectral studies. ¹¹⁹Sn NMR spectral data revealed the presence of pentacoordinated tin centres in these dimethyltin(IV) complexes.     

Water‐Promoted Generation of a Diazairida Homobarrelene by CC Coupling Between an Iridacyclic Alkylidene and Acetonitrile

The stable cationic iridacyclopentenylidene [Tp^Me2Ir(?CHC(Me)?C(Me)C H₂(NCMe)]PF₆ ( A ; Tp^Me2=hydrotris(3,5‐dimethylpyrazolyl)borate) has been obtained by α‐hydride abstraction from the iridacyclopent‐2‐ene [Tp^Me2Ir(CH₂C(Me)?C(Me)C H₂)(NCMe)]. Complex A exhibits Brønsted–Lowry acidity at the Ir? CH₂ and proximal (relative to Ir? CH₂) methyl sites. The coordination of an extra molecule of acetonitrile to the iridium center initiates the reversible isomerization of the chelating carbon chain of A to the monodentate butadienyl ligand of complex [Tp^Me2Ir(CH?C(Me)C(Me)?CH₂)(NCMe)₂]PF₆, which is capable to engage in a water‐promoted C? C coupling with the MeCN co‐ligands. The product is an aesthetically appealing bicyclic structure that resembles the hydrocarbon barrelene.     

Cationic tris(pyrazolyl)borate bipyrimidine complexes

The cationic complexes, [Tp^RNi(bpym)]⁺ {Tp^R = tris(3,5-diphenylpyrazolyl)borate, R = Ph₂ 1; tris(3-phenyl-5-methylpyrazolyl)borate, R = Ph,Me 2} were synthesized by reacting [Tp^RNiBr] (R = Ph₂; Ph,Me) with bipyrimidine followed by subsequent addition of KPF₆ in CH₂Cl₂. The green solids have been characterized by IR, UV–Vis and ¹H NMR spectroscopy. Crystallographic studies of [Tp^Ph,MeNi(bpym)]PF₆ reveal a five-coordinate square pyramidal nickel centre with a κ³-coordinated Tp^Ph,Me ligand and a chelating bipyrimidine ligand. Cyclic voltammetric studies show irreversible reduction with the degree of reversibility dependent on the type of Tp^R ligand.     

Palladium(II) compounds with planar chirality. X-Ray crystal structures of (+)-(R)-[{(η5-C5H4)–CHN–CH(Me)–C10H7}Fe(η5-C5H5)] and (+)-(Rp,R)-[Pd{[(Et–CC–Et)2(η5-C5H3)–CHN–CH(Me)–C10H7]Fe(η5-C5H5)}Cl]

A wide variety of planar chiral cyclopalladated compounds of general formulae [Pd{[(η⁵-C₅H₃)–CHN–CH(Me)–C₁₀H₇]Fe(η⁵-C₅H₅)}Cl(L)] (with L=py-d₅ or PPh₃), [Pd{[(η⁵-C₅H₃)–CHN–CH(Me)–C₁₀H₇]Fe(η⁵-C₅H₅)}(acac)] or [Pd{[(R¹–CC–R²)₂(η⁵-C₅H₃)–CHN–CH(Me)–C₁₀H₇]Fe(η⁵-C₅H₅)}Cl] (with R¹=R²=Et; R¹=Me, R²=Ph; R¹=H, R²=Ph; R¹=R²=Ph; R¹=R²=CO₂Me or R¹=CO₂Et, R²=Ph) are reported. The diastereomers {(R_p,R) and (S_p,R)} of these compounds have been isolated by either column chromatography or fractional crystallization. The free ligand (R)-(+)-[{(η⁵-C₅H₄)–CHN–CH(Me)–C₁₀H₇}Fe(η⁵–C₅H₅)] (1) and compound (+)-(R_p,R)-[Pd{[(Et–CC–Et)₂(η⁵-C₅H₃)–CHN–CH(Me)–C₁₀H₇]Fe(η⁵-C₅H₅)}Cl] (7a) have also been characterized by X-ray diffraction. Electrochemical studies based on cyclic voltammetries of all the compounds are also reported.     

Synthesis and Characterization of β‐Diketiminate Aluminum Compounds and Their Use in the Ring‐Opening Polymerization of ε‐Caprolactone

Four aluminum alkyl compounds, [CH{(CH₃)CN‐2,4,6‐MeC₆H₂}₂AlMe₂] ( 1 ), [CH{(CH₃)CN‐2,4,6‐MeC₆H₂}₂AlEt₂] ( 2 ), [CH{(CH₃)CN‐2‐iPrC₆H₄}₂AlMe₂] ( 3 ), and [CH{(CH₃)CN‐2‐iPrC₆H₄}₂AlEt₂] ( 4 ), bearing β‐diketiminate ligands [CH{(Me)CN‐2,4,6‐MeC₆H₂}]₂ (L¹H) and [CH{(Me)CN‐2‐ⁱPrC₆H₄}]₂ (L²H) were obtained from the reactions of trimethylaluminum, triethylaluminum with the corresponding β‐diketiminate, respectively. All compounds were characterized by ¹H NMR and ¹³C NMR spectroscopy, single‐crystal X‐ray structural analysis, and elemental analysis. Compounds 1 – 4 were found to catalyze the ring‐opening polymerization (ROP) of ε‐caprolactone (ε‐CL) with good activity.     

Radical‐induced oxidation of RAFT agents—A kinetic study

Radical‐induced oxidation of reversible addition‐fragmentation chain transfer (RAFT) agents is investigated with respect to the effect of molecular structure on oxidation rate. The radicals are generated by homolysis of either azobisisobutyronitrile or alkoxyamine and transformed in situ immediately into peroxy radicals through transfer to molecular oxygen. It is found that the oxidation rate depends on the structure of Z‐ and R‐group of thiocarbonylthio compounds. For dithioesters with identical Z‐phenyl substituent, the oxidation rate decreases in the order of cyanoisopropyl (? C(Me)₂CN) > cumyl (? C(Me)₂Ph) > phenylethyl (? CH(Me)Ph) > 2‐methoxy‐1‐methyl‐2‐oxoethyl (? CH(Me) ? C(?O)OCH₃) > benzyl (? CH₂Ph). For dithioesters with identical R‐group, the oxidation rate decreases in the order of Z = phenyl? ～ benzyl? > RS? (trithiocarbonates) > RO? (xanthates). The stability of the RAFT agents toward oxidation correlates well with the chain transfer abilities as those previously reported by Rizzardo and coworkers. The priority of the oxidation reaction over the RAFT process, and the subsequent influence on RAFT polymerization are also investigated. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Gemischte Sandwichkomplexe der 4 f‐Elemente: Enantiomerenreine Cyclooctatetraenyl‐Cyclopentadienyl‐Komplexe des Samariums und Lutetiums mit donorfunktionalisierten Cyclopentadienylliganden

Organometallic Compounds of the Lanthanides. 139 Mixed Sandwich Complexes of the 4 f Elements: Enantiomerically Pure Cyclooctatetraenyl Cyclopentadienyl Complexes of Samarium and Lutetium with Donor‐Functionalized Cyclopentadienyl Ligands The reactions of [K{(S)‐C₅H₄CH₂CH(Me)OMe}], [K{(S)‐C₅H₄CH₂CH(Me)NMe₂}] and [K{(S)‐C₅H₄CH(Ph)CH₂NMe₂}] with the cyclooctatetraenyl lanthanide chlorides [(η⁸‐C₈H₈)Ln(μ‐Cl)(THF)]₂ (Ln = Sm, Lu) yield the mixed cyclooctatetraenyl cyclopentadienyl lanthanide complexes [(η⁸‐C₈H₈)Sm{(S)‐η⁵ : η¹‐C₅H₄CH₂CH(Me)OMe}] ( 1 a ), [(η⁸‐C₈H₈)Ln{(S)‐η⁵ : η¹‐C₅H₄CH₂CH(Me)NMe₂}] (Ln = Sm ( 2 a ), Lu ( 2 b )) and [(η⁸‐C₈H₈)Ln{(S)‐η⁵ : η¹‐C₅H₄CH(Ph)CH₂NMe₂}] (Ln = Sm ( 3 a ), Lu ( 3 b )). For comparison, the achiral compounds [(η⁸‐C₈H₈)Ln{η⁵ : η¹‐C₅H₄CH₂CH₂NMe₂}] (Ln = Sm ( 4 a ), Lu ( 4 b )) are synthesized in an analogous manner. ¹H‐, ¹³C‐NMR‐, and mass spectra of all new compounds as well as the X‐ray crystal structures of 3 b and 4 b are discussed.     

Polymerization of 1‐Phosphaisoprene: Synthesis and Characterization of a Chemically Functional Phosphorus Version of Natural Rubber

Macromolecules derived from 1,3‐dienes, such as polyisoprene (or natural rubber), are of considerable importance in polymer science. Given the parallels between P=C and C=C bonds, the prospect of polymerizing P‐containing 1,3‐dienes, such as 1‐phosphaisoprene, is intriguing due to the unique chemical functionality imparted by the heavier element combined with their structural relationship to natural rubber. Herein, we report the synthesis, characterization and coordination chemistry of the first polymers derived from Mes*P=CR−CH=CH₂ (Mes*=2,4,6‐t‐Bu₃C₆H₂; R=H, Me). In the case of 1‐phosphaisoprene (R=Me), the monomer is isolable and its anionic polymerization affords a polymer that retains P=C bonds in its microstructure. The chemical functionality of these novel materials is demonstrated by forming the macromolecular gold(I) complex where the P=C bond is retained for further chemical elaboration.     

Preparation of siloxycarbenemanganese complexes including a chelated siloxycarbene-alkene complex

Reaction of Li{(η⁵-C₅H₄Me)Mn(CO)₂]C(O)Ph]} with one equivalent of RSiMe₂Cl yields (η⁵-C₅H₄Me)Mn(CO)₂[C(Ph)(OSiMe₂R)] for R  CH₃, CHCH₂, and CH₂CHCH₂ (1a–c, respectively). Low temperature photolysis of the vinyl derivative, 1b, results in formation of a chelated manganese siloxycarbene-alkene complex, (η⁵-C₅H₄Me)MN(CO)[C(Ph)(η²-OSiMe₂CHCH₂)]. (2). Photolysis of the allyl derivative, 1c, under similar conditions leads to uncharacterized decomposition products. Infrared, ¹H, ¹³C, and ²⁹Si NMR data are reported for these new siloxycarbenemanganese derivatives.     

Diversification of ortho‐Fused Cycloocta‐2,5‐dien‐1‐one Cores and Eight‐ to Six‐Ring Conversion by σ Bond C−C Cleavage

Sequential treatment of 2‐C₆H₄Br(CHO) with LiC≡CR¹ (R¹=SiMe₃, tBu), nBuLi, CuBr?SMe₂ and HC≡CCHClR² [R²=Ph, 4‐CF₃Ph, 3‐CNPh, 4‐(MeO₂C)Ph] at ?50 °C leads to formation of an intermediate carbanion (Z)‐1,2‐C₆H₄{C_A(=O)C≡C_BR¹}{CH=CH(CH^?)R²} ( 4 ). Low temperatures (?50 °C) favour attack at C_B leading to kinetic formation of 6,8‐bicycles containing non‐classical C‐carbanion enolates ( 5 ). Higher temperatures (?10 °C to ambient) and electron‐deficient R² favour retro σ‐bond C?C cleavage regenerating 4 , which subsequently closes on C_A providing 6,6‐bicyclic alkoxides ( 6 ). Computational modelling (CBS‐QB3) indicated that both pathways are viable and of similar energies. Reaction of 6 with H⁺ gave 1,2‐dihydronaphthalen‐1‐ols, or under dehydrating conditions, 2‐aryl‐1‐alkynylnaphthlenes. Enolates 5 react in situ with: H₂O, D₂O, I₂, allylbromide, S₂Me₂, CO₂ and lead to the expected C ‐E derivatives (E=H, D, I, allyl, SMe, CO₂H) in 49–64 % yield directly from intermediate 5 . The parents (E=H; R¹=SiMe₃, tBu; R²=Ph) are versatile starting materials for NaBH₄ and Grignard C=O additions, desilylation (when R¹=SiMe) and oxime formation. The latter allows formation of 6,9‐bicyclics via Beckmann rearrangement. The 6,8‐ring iodides are suitable Suzuki precursors for Pd‐catalysed C?C coupling (81–87 %), whereas the carboxylic acids readily form amides under T3P® conditions (71–95 %).     

Effect of fluorinated/non‐fluorinated β‐diketones and side‐chain branching of N‐protected amino acids on the antibacterial potential of new heptacoordinated monobutyltin(IV) complexes

The effect of fluorinated/non‐fluorinated β‐diketones and side‐chain branching of N‐protected amino acids on the antibacterial potential of new heptacoordinated monobutyltin(IV) complexes was investigated. New heptacoordinated monobutyltin(IV) complexes having the general formulae BuSn(A)₂B and BuSnA(B)₂ [where AH = (1,3‐dihydro‐1,3‐dioxo‐α‐(substituted)‐2H ‐isoindole‐2‐acetic acids, N‐protected amino acids), R =  CH(CH₃)CH₂CH₃: A₁H; R =  CH(CH₃)₂: A₂H; and BH = R'COCH₂COR″ (β‐diketones), R′ = R″ =  CH₃: B₁H; R′ =  CH₃, R″ =  C₆H₅: B₂H; R′ =  CF₃, R″ =  C₆H₅: B₃H] were synthesized. Complexes BuSn(A)₂B and BuSnA(B)₂ were generated by the reaction of sodium salts of the ligands AH and BH with BuSnCl₃ in 2:1:1 and 1:2:1 molar ratios, respectively. These newly generated complexes were characterized in physicochemical and spectroscopic studies. These complexes contain heptacoordinated tin centres as revealed by ¹¹⁹Sn NMR chemical shift values. Some of the newly generated complexes and their corresponding ligands were screened for their antibacterial activity to study the structure–activity relationship.     

Water Soluble Gold(I)‐diacetyl‐1,3,5‐triaza‐7‐phosphaadamantane‐arylazoimidazole Complexes: Synthesis and Spectroscopic Study

Reaction of [Au(DAPTA)(Cl)] with RaaiR’ in CH2Cl2 medium following ligand addition leads to [Au(DAPTA)(RaaiR’)](Cl) [DAPTA＝diacetyl-1,3,5-triaza-7-phosphaadamantane, RaaiR’＝p-R-C6H4-N＝N- C3H2-NN-1-R’, (1—3), abbreviated as N,N’-chelator, where N(imidazole) and N(azo) represent N and N’, respectively; R＝H (a), Me (b), Cl (c) and R’＝Me (1), CH2CH3 (2), CH2Ph (3)]. The 1H NMR spectral measurements in D2O suggest methylene, CH2, in RaaiEt gives a complex AB type multiplet while in RaaiCH2Ph it shows AB type quartets. 13C NMR spectrum in D2O suggest the molecular skeleton. The 1H-1H COSY spectrum in D2O as well as contour peaks in the 1H-13C HMQC spectrum in D2O assign the solution structure.     

Synthesis and characterization of aluminum(III) and tin(II) complexes supported by diiminophosphinate ligands and their application in ring‐opening polymerization catalysis of ε‐caprolactone

A series of Al(III) and Sn(II) diiminophosphinate complexes have been synthesized. Reaction of Ph(ArCH₂)P(?NBu^t)NHBu^t (Ar = Ph, 3 ; Ar = 8‐quinolyl, 4 ) with AlR₃ (R = Me, Et) gave aluminum complexes [R₂Al{(NBu^t)₂P(Ph)(CH₂Ar)}] (R = Me, Ar = Ph, 5 ; R = Me, Ar = 8‐quinolyl, 6 ; R = Et, Ar = Ph, 7 ; R = Et, Ar = quinolyl, 8 ). Lithiated 3 and 4 were treated with SnCl₂ to afford tin(II) complexes [ClSn{(NBu^t)₂P(Ph)(CH₂Ar)}] (Ar = Ph, 9 ; Ar = 8‐quinolyl, 10 ). Complex 9 was converted to [(Me₃Si)₂NSn{(NBu^t)₂P(Ph)(CH₂Ph)}] ( 11 ) by treatment with LiN(SiMe₃)₂. Complex 11 was also obtained by reaction of 3 with [Sn{N(SiMe₃)₂}₂]. Complex 9 reacted with [LiOC₆H₄Bu^t‐4] to yield [4‐Bu^tC₆H₄OSn{(NBu^t)₂P(Ph)(CH₂Ph)}] ( 12 ). Compounds 3–12 were characterized by NMR spectroscopy and elemental analysis. The structures of complexes 6 , 10 , and 11 were further characterized by single crystal X‐ray diffraction techniques. The catalytic activity of complexes 5–8 , 11 , and 12 toward the ring‐opening polymerization of ε‐caprolactone (CL) was studied. In the presence of BzOH, the complexes catalyzed the ring‐opening polymerization of ε‐CL in the activity order of 5 > 7 ≈ 8 > 6 ? 11 > 12 , giving polymers with narrow molecular weight distributions. The kinetic studies showed a first‐order dependency on the monomer concentration in each case. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4621–4631, 2006     

Synthesis and structural characterization of monomeric aluminum keto-imine complexes: Catalytic activity toward CO2/styrene oxide coupling and ε-caprolactone ring opening polymerization

A series of benzoylacetone-imine ligands, PhCOCHCMeNHR ( L ¹ H , R = CH₂Ph; L ² H , R = CH₂Ph-4-Me; and L ³ H , R = CH₂Ph-4-OMe), are first synthesized following the condensation of benzoylacetone and 4-substituted benzylamine. Later, reacting L ¹ H – L ³ H with one equivalent of AlMe₃ in toluene, the monomeric Al derivatives are generated, (PhCOCHCMeNR)AlMe₂ ( 1 , R = CH₂Ph; 2 , R = CH₂Ph-4-Me; 3 , R = CH₂Ph-4-OMe). All the ligands and metal derivatives are characterized by ¹H and ¹³C NMR spectroscopy. Single crystal X-ray diffraction analysis reveals the geometry of all ligands and complex 2 . As supporting catalysts, the Al derivatives, 1 – 3 , are effective to initiate the coupling of CO₂ and styrene oxide to form cyclic carbonates. Although employing TBAI (tetra-n-butylammonium iodide), TBAC, tetrabutylammonium chloride, and TBAB (tetra butyl ammonium bromide) as cocatalyst, the optimized catalytic system exhibits the best conversion of epoxide in presence of TBAI under the reaction temperature and time, respectively, 90°C and 6 hr, respectively. The ring opening polymerization of ε-caprolactone is also appraised subjecting the Al derivatives, 1 – 3 , as catalysts in presence of benzyl alcohol and all the conversions of ε-caprolactone reach over 95% at the reaction condition of 100°C and 1 hr.