Pd–Schiff base complex supported on Fe3O4 magnetic nanoparticles: A new and highly efficient reusable catalyst for C–C bond formation in water

A protocol is introduced for the preparation of a new cage‐like Pd–Schiff base organometallic complex supported on Fe₃O₄ nanoparticles (Fe₃O₄@Schiff‐base‐Pd). The structure of the nanomagnetic catalyst was comprehensively characterized using Fourier transform infrared (FT‐IR) spectroscopy, X‐ray diffraction (XRD), energy‐dispersive X‐ray spectroscopy, Brunauer–Emmett–Teller measurements, scanning electron microscopy (SEM), transmission electron microscopy, X‐ray mapping, thermogravimetric analysis, vibrating sample magnetometry and inductively coupled plasma atomic emission spectroscopy. In the second stage, the catalytic activity of this catalyst was studied in the Suzuki and Heck cross‐coupling reactions in water as a green solvent. In this sense, simple preparation of the catalyst from commercially available materials, high catalytic activity, simple operation, short reaction times, high yields and use of green solvent are some advantages of this protocol. Finally, the nanocatalyst was easily recovered, using an external magnet, and reused several times without significant loss of its catalytic efficiency. In addition, the stability of the catalyst after recycling was confirmed using SEM, XRD and FT‐IR techniques.     

Selective oxidation of ethylbenzene to acetophenone over Cr(III) Schiff base complex intercalated into layered double hydroxide

A new heterogeneous catalyst, Cr(III) Schiff base‐containing layered double hydroxide, was synthesized using the intercalation method. The Cr(III) Schiff base complex derived from 2‐hydroxy‐1‐naphthaldehyde and 4‐aminobenzoic acid was intercalated into the layered double hydroxide. The synthesized materials were characterized using inductively coupled plasma atomic emission spectrometry, energy‐dispersive X‐ray analysis, scanning electron microscopy, X‐ray diffraction, Brunauer–Emmett–Teller surface area measurement, Fourier transform infrared spectroscopy, thermogravimetric analysis, diffuse reflectance UV–visible spectroscopy and electron paramagnetic resonance spectroscopy. The catalytic activity was investigated for the oxidation of ethylbenzene with tert‐butylhydroperoxide as an oxidant under solvent‐free conditions as well as with lower chromium concentrations. In the oxidation reaction, ethylbenzene was oxidized to acetophenone and benzaldehyde. The catalyst was recycled ten times without significant loss of catalytic activity. Leaching studies performed with hot filtration experiments showed that the chromium catalyst was heterogeneous in nature and stable under the reaction conditions.     

Mn(III)–pentadentate Schiff base complex supported on multi‐walled carbon nanotubes as a green,mild and heterogeneous catalyst for the synthesis of tetrahydrobenzo[b]pyrans via tandem Knoevenagel–Michael cyclocondensation reaction

Mn(III)–pentadentate Schiff base complex supported on multi‐walled carbon nanotubes as a recyclable and reusable, green and nano‐heterogeneous catalyst was designed and fully characterized using infrared spectroscopy, X‐ray diffraction, scanning electron microscopy, energy‐dispersive X‐ray spectroscopy , inductively coupled plasma mass spectrometry, elemental analysis and thermogravimetric analysis. A facile, eco‐friendly, mild and green procedure was developed for the one‐pot three‐component synthesis of tetrahydrobenzo[b ]pyrans via tandem Knoevenagel–Michael cyclocondensation reactions between aromatic aldehydes, 1,3‐diones and malononitrile using a catalytic amount of Mn(III)–pentadentate Schiff base complex supported on MWCNTs as an efficient recyclable heterogeneous catalyst under solvent‐free conditions at room temperature. This process has the advantages of easy availability, stability, recyclability and eco‐friendliness of the catalyst, short reaction times, high to excellent yields and simple work‐up procedure.     

Oxo‐vanadium(IV) Schiff base complex supported on modified MCM‐41: a reusable and efficient catalyst for the oxidation of sulfides and oxidative S–S coupling of thiols

Oxo‐vanadium(IV) Schiff base complex supported on MCM‐41 as an organic–inorganic hybrid heterogeneous catalyst was synthesized with post‐grafting of MCM‐41 with 3‐aminoropropyltrimethoxysilane and subsequent reaction with 3,4‐dihydroxybenzaldehyde and then complexation with oxo‐vanadium acetylacetonate salt. The catalyst was analysed using a series of characterization techniques such as Fourier transform infrared spectroscopy, small‐angle X‐ray diffraction, nitrogen absorption isotherm, transmission electron microscopy and thermogravimetric analysis. The data collected provided evidence that the vanadium complex was anchored onto MCM‐41. High catalytic activity of this catalyst was observed in the oxidation of various sulfides and thiols (into sulfoxides and disulfides, respectively) with urea hydrogen peroxide as oxidant in high to excellent yields and selectivity under mild conditions. The heterogeneous catalyst could be recovered easily and reused several times without significant loss in catalytic activity and selectivity. Copyright © 2015 John Wiley & Sons, Ltd.     

Multi‐wall carbon nanotube supported Co (II) Schiff base complex: an efficient and highly reusable catalyst for synthesis of 1‐amidoalkyl‐2‐naphthol and tetrahydrobenzo[b]pyran derivatives

An immobilized Co (II) Schiff base complex supported on multi‐wall carbon nanotubes was synthesized and characterized using Fourier transform infrared spectroscopy, X‐ray diffraction, scanning electron microscopy, energy‐dispersive X‐ray spectroscopy , thermogravimetric analysis and inductively coupled plasma mass spectrometry. It was shown that the supported complex is a facile, eco‐friendly, recyclable, reusable and green catalyst for three‐component condensation of 2‐naphthol and acetamide with various aldehydes for the synthesis of 1‐amidoalkyl‐2‐naphthol derivatives under solvent‐free conditions. Also, in a further study, the catalytic application was studied in the synthesis of tetrahydrobenzo[b ]pyran derivatives via the condensation reaction of malononitrile and dimedone with several aromatic aldehydes. The procedures suggested here for the synthesis of 1‐amidoalkyl‐2‐naphthol and tetrahydrobenzo[b ]pyran derivatives offer several advantages, such as stability, recyclability and eco‐friendliness of the catalyst, simple experimental conditions, short reaction times, high to excellent yields and easy work‐up.     

Synthesis and characterization of a novel magnetic nano‐palladium Schiff base complex: application in cross‐coupling reactions

A novel and task‐specific nano‐magnetic Schiff base ligand with phosphate spacer using 2‐aminoethyl dihydrogen phosphate instead of usual coating agents, i.e. tetraethoxysilane and 3‐aminopropyltriethoxysilane, for coating of nano‐magnetic Fe₃O₄ is introduced. The nano‐magnetic Schiff base ligand with phosphate spacer as a novel catalyst was synthesized and fully characterized using infrared spectroscopy, X‐ray diffraction, scanning and transmission electron microscopies, thermogravimetry, derivative thermogravimetry, vibrating sample magnetometry, atomic force microscopy, X‐ray photoelectron spectroscopy and energy‐dispersive X‐ray spectroscopy. The resulting task‐specific nano‐magnetic Schiff base ligand with phosphate spacer was successfully employed as a magnetite Pd nanoparticle‐supported catalyst for Sonogashira and Mizoroki–Heck C–C coupling reactions. To the best of our knowledge, this is the first report of the synthesis and applications of magnetic nanoparticles of Fe₃O₄@O₂PO₂(CH₂)₂NH₂ as a suitable spacer for the preparation of a designable Schiff base ligand and its corresponding Pd complex. So the present work can open up a new and promising insight in the course of rational design, synthesis and applications of various task‐specific magnetic nanoparticle complexes. Copyright © 2016 John Wiley & Sons, Ltd.     

Fe3O4‐supported Schiff‐base copper (II) complex: A valuable heterogeneous nanocatalyst for one‐pot synthesis of new pyrano[2,3‐b]pyridine‐3‐carboxamide derivatives

A novel Cu (II) Schiff‐base complex immobilized on core‐shell magnetic Fe₃O₄ nanoparticles (Fe₃O₄@SPNC) was successfully designed and synthesized. The structural features of these nanoparticles were studied and confirmed by using various techniques including FT‐IR spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy‐dispersive X‐ray spectroscopy (EDS), vibrating sample magnetometer (VSM), X‐Ray diffraction (XRD), wavelength dispersive X‐ray spectroscopy (WDX), and inductively coupled plasma (ICP). These newly synthesized nanoparticles have been used as efficient heterogeneous catalytic system for one‐pot multicomponent synthesis of new pyrano[2,3‐b]pyridine‐3‐carboxamide derivatives. Notably, the catalyst could be easily separated from the reaction mixture by using an external magnet and reused for several successive reaction runs with no significant loss of activity or copper leaching. The present protocol benefits from a hitherto unreported MNPs‐immobilized Cu (II) Schiff‐base complex as an efficient nanocatalyst for the synthesis of newly reported derivatives of pyrano[2,3‐b]pyridine‐3‐carboxamide from one‐pot multicomponent reactions.     

Synthesis of pyranopyrazoles using nano‐Fe‐[phenylsalicylaldiminemethylpyranopyrazole]Cl2 as a new Schiff base complex and catalyst

By the condensation reaction of benzaldehyde with ethyl acetoacetate, malononitrile and hydrazine hydrate in the presence of FeCl₂, a pyranopyrazole derivative was prepared which was then reacted with salicylaldehyde to afford nano‐Fe‐[phenylsalicylaldiminemethylpyranopyrazole]Cl₂ (nano‐[Fe‐PSMP]Cl₂). The prepared nano‐Schiff base complex was fully characterized using Fourier transform infrared spectroscopy, X‐ray diffraction, thermogravimetric analysis, differential thermogravimetry, scanning electron microscopy and UV–visible spectroscopy, and was used as an efficient and catalyst for the preparation of pyranopyrazoles.     

Copper Schiff base complex immobilized on silica‐coated Fe3O4 nanoparticles: a recoverable and efficient catalyst for synthesis of polysubstituted pyrroles

In this work, a copper Schiff base complex immobilized on silica‐coated Fe₃O₄ nanoparticles is synthesized, and studied as a highly efficient, recyclable, green and heterogeneous catalyst for the preparation of polysubstituted pyrroles under solvent‐free and mild conditions. This new catalyst was characterized by different techniques, such as Fourier transform infrared (FT‐IR), X‐ray powder diffraction (XRD), field‐emission scanning electron microscopy (SEM), energy‐dispersive X‐ray spectroscopy (EDX), inductively coupled plasma (ICP) and vibrating sample magnetometry (VSM). The simple and environmentally one‐pot multicomponent condensation of nitromethane, an aryl aldehyde, a 1,3‐dicarbonyl compound and an amine in the presence of above catalyst affords the title compounds at room temperature. At the end, we compared the results for the synthesis of polysubstituted pyrroles in the presence of our nanocatalyst with previously reported catalysts in the literature.     

Functionalization of superparamagnetic Fe3O4@SiO2 nanoparticles with a Cu(II) binuclear Schiff base complex as an efficient and reusable nanomagnetic catalyst for N‐arylation of α‐amino acids and nitrogen‐containing heterocycles with aryl halides

Fe₃O₄@SiO₂ nanoparticles was functionalized with a binuclear Schiff base Cu(II)‐complex (Fe₃O₄@SiO₂/Schiff base‐Cu(II) NPs) and used as an effective magnetic hetereogeneous nanocatalyst for the N‐arylation of α‐amino acids and nitrogen‐containig heterocycles. The catalyst, Fe₃O₄@SiO₂/Schiff base‐Cu(II) NPs, was characterized by Fourier transform infrared (FTIR) and ultraviolet‐visible (UV‐vis) analyses step by step. Size, morphology, and size distribution of the nanocatalyst were studied by transmission electron microscopy (TEM), scanning electron microscopy (SEM), and dynamic light scatterings (DLS) analyses, respectively. The structure of Fe₃O₄ nanoparticles was checked by X‐ray diffraction (XRD) technique. Furthermore, the magnetic properties of the nanocatalyst were investigated by vibrating sample magnetometer (VSM) analysis. Loading content as well as leaching amounts of copper supported by the catalyst was measured by inductive coupled plasma (ICP) analysis. Also, thermal studies of the nanocatalyst was studied by thermal gravimetric analysis (TGA) instrument. X‐ray photoelectron spectroscopy (XPS) analysis of the catalyst revealed that the copper sites are in +2 oxidation state. The Fe₃O₄@SiO₂/Schiff base‐Cu(II) complex was found to be an effective catalyst for C–N cross‐coupling reactions, which high to excellent yields were achieved for α‐amino acids as well as N‐hetereocyclic compounds. Easy recoverability of the catalyst by an external magnet, reusability up to eight runs without significant loss of activity, and its well stability during the reaction are among the other highlights of this catalyst.     

Mn‐[4‐Chlorophenyl‐Salicylaldimine‐Methylpyranopyrazole]Cl2 as a Novel Nanostructured Schiff Base Complex and Catalyst

Mn‐[4‐chlorophenyl‐salicylaldimine‐methylpyranopyrazole]Cl₂ ([Mn‐4CSMP ]Cl₂) as nano‐Schiff base complex was prepared and fully characterized by Fourier transform infrared spectroscopy, X‐ray diffraction, thermal gravimetric analysis, derivative thermogravimetry, scanning electron microscopy, energy‐dispersive X‐ray analysis, and UV–vis spectroscopy. The reactivity of nano‐[Mn‐4CSMP ]Cl₂ as a catalyst was tested on the tandem cyclocondensation–Knoevenagel condensation–Michael reaction between phenylhydrazine and ethyl acetoacetate with various aromatic aldehydes to give 4,4′‐(arylmethylene)‐bis‐(3‐methyl‐1‐phenyl‐1H ‐pyrazol‐5‐ol)s derivatives.     

Phosphomolybdic acid supported on Schiff base functionalized graphene oxide nanosheets: Preparation,characterization, and first catalytic application in the multi‐component synthesis of tetrahydrobenzo[a]xanthene‐11‐ones

New Schiff base (SB) functionalized graphene oxide (GO) nanosheets containing phosphomolybdic counter‐anion H₂PMo₁₂O₄₀^¯ (H₂PMo) were successfully prepared by grafting of 3‐aminopropyltriethoxysilane (APTS) on GO nanosheets followed by condensation with benzil and finally reaction with phosphomolybdic acid (H₃PMo₁₂O₄₀, denoted as H₃PMo) and characterized using Fourier transform infrared (FT‐IR) spectroscopy, field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), atomic force microscopy (AFM), particle size distribution, energy‐dispersive X‐ray (EDX) analysis, EDX elemental mapping, and inductively coupled plasma optical emission spectrometry (ICP‐OES). The prepared new nanomaterial, denoted as GO‐SB‐H₂PMo, was shown to be an efficient heterogeneous catalyst in one‐pot, three‐component reaction of β‐naphthol, aldehydes, and dimedone, giving high yields of tetrahydrobenzo[a]xanthene‐11‐ones within short reaction times. The catalyst is readily recovered by simple filtration and can be recycled and reused several times with no significant loss of catalytic activity.     

Catalytic performance of chitosan‐Schiff base supported Pd/Co bimetallic catalyst for acrylamide with phenyl halide

The chitosan‐Schiff base supported palladium and cobalt bimetallic complex was synthesized in a simple method and characterized by Fourier‐transform infrared spectroscopy (FT‐IR), powder X‐ray diffraction (XRD), and X‐ray photoelectron spectra (XPS). It was found that the catalyst has great activity and stability in the coupling of acrylamide (AA) with the phenyl halide. The influence of various bimetallic catalysts, the different molar ratio of Co/Pd, the bases, the amount of the catalyst and base, and the molar ratio of iodobenzene/AA on the reaction were investigated. The results showed that the catalytic activity of the molar ratio of Co/Pd (3/1) was the best when the iodobenzene was used as a substrate. The yield of the cinnamamide did not change significantly after ten runs. It has been revealed that the catalyst was efficient for the reaction. Copyright © 2009 John Wiley & Sons, Ltd.     

Baeyer‐Villiger oxidation of cyclopentanone over zeolite Y entrapped transition metal‐Schiff base complexes

Transition metal [M = VO (IV) and/or Cu (II)] complexes with Schiff base ligand, (Z)‐2‐((2‐hydroxybenzylideneamino)phenol (H₂L) have been entrapped in the super cages of zeolite‐Y by Flexible Ligand Method. Synthesized materials have been characterized by preferential physico‐chemical techniques such as inductively coupled plasma optical emission spectroscopy (ICP‐OES), elemental analyses (CHN), fourier transmission infrared spectroscopy (FTIR), electronic and UV‐reflectance spectra, Brunauer–Emmett–Teller (BET) surface area measurements, scanning electron micrographs (SEMs), X‐ray diffraction patterns (XRD) and thermogravimetric analysis (TGA). The catalytic competence of zeolite‐Y entrapped transition metal complexes was examined in Baeyer‐Villiger (BV) oxidation of cyclopentanone using 30% H₂O₂ as an oxidant beside neat complexes to check the aptitude of heterogeneous catalysis over the homogeneous system. The effect of experimental variables such as mole ratio of substrate to an oxidant, amount of catalyst, reaction time, varying oxidants and solvents on the conversion of cyclopentanone was also tested. Under the optimized reaction conditions, one of the zeolite‐Y entrapped transition metal complex viz. [VO(L)H₂O]‐Y [where L = (Z)‐2‐((2‐hydroxybenzylideneamino)phenol] was found to be a potential contender by providing 80.22% conversion of cyclopentanone (TON: 10479.42), and the selectivity towards δ‐valerolactone was 83.56%.     

Piperazine‐functionalized nickel ferrite nanoparticles as efficient and reusable catalysts for the solvent‐free synthesis of 2‐amino‐4H‐chromenes

Piperazine‐functionalized nickel ferrite (NiFe₂O₄) nanoparticles were synthesized as recoverable heterogeneous base catalysts using a routine method. The synthesized materials were characterized using various spectroscopic techniques such as infrared, X‐ray diffraction, scanning electron microscopy, energy‐dispersive X‐ray, thermogravimetry analysis, and vibrating sample magnetometry. Catalytic efficiency was investigated in the synthesis of 2‐amino‐4H‐chromene derivatives via a one‐pot three component reaction of aldehyde and malononitrile with β or α‐naphthol/5‐methyle resorcinol under solvent‐free conditions with good to high yields. This method is operationally simple and has several advantages such as good to high yield, short reaction times, solvent‐free conditions, and easy synthesis. Moreover, the catalyst was recovered easily using an external magnet and reused three times without distinctive loss in catalytic activity.     

Efficient and recyclable novel Ni‐based metal–organic framework nanostructure as catalyst for the cascade reaction of alcohol oxidation–Knoevenagel condensation

A novel Ni‐based metal–organic framework (Ni‐MOF) with a Schiff base ligand as an organic linker, Ni₃(bdda)₂(OAc)₂?6H₂O (H₂bdda = 4,4′‐[benzene‐1,4‐diylbis(methylylidenenitrilo)]dibenzoic acid), was synthesized and characterized using powder X‐ray powder diffraction, thermogravimetric analysis, Brunauer–Emmett–Teller measurements, inductively coupled plasma atomic emission spectroscopy, transmission electron microscopy, elemental analysis and Fourier transform infrared spectroscopy. The synthesized Ni‐MOF exhibited a high catalytic activity in benzyl alcohol oxidation using tert‐butyl hydroperoxide under solvent‐free conditions. Also, the efficiency of the catalyst was investigated in the cascade reaction of oxidation–Knoevanagel condensation under mild conditions. The Ni‐MOF catalyst could be recovered and reused four times without significant reduction in its catalytic activity.     

Cu(II)–Schiff base complex‐functionalized magnetic Fe3O4 nanoparticles: a heterogeneous catalyst for various oxidation reactions

Cu(II)–Schiff base complex‐functionalized magnetic Fe₃O₄ nanoparticles were prepared and characterized using Fourier transform infrared spectroscopy, thermogravimetric analysis and scanning electron microscopy techniques. This compound acts as a highly active and selective catalyst for the oxidation of sulfides and thiols. These reactions can be carried out in ethanol or solvent‐free conditions in the presence of hydrogen peroxide with complete selectivity and very high conversion under mild reaction conditions. The designed catalytic system prevents effectively the over‐oxidation of sulfides to sulfones. Separation and recycling can also be easily done using a simple magnetic separation process. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis and characterization of copper(II) Schiff base complex supported on Fe3O4 magnetic nanoparticles: a recyclable catalyst for the one‐pot synthesis of 2,3‐dihydroquinazolin‐4(1H)‐ones

Fe₃O₄–Schiff base of Cu(II) is found to be a recyclable and heterogeneous catalyst for the rapid and efficient synthesis of various 2,3‐dihydroquinazolin‐4(1H)‐one derivatives from the two‐component condensation of 2‐aminobenzamide and an aldehyde. This reaction is simple, green and cost‐effective. Separation and recycling can also be easily done by magnetic decantation of the Fe₃O₄ nanoparticles with an external magnet. The prepared catalyst was characterized using thermogravimetry, Fourier transform infrared spectroscopy, vibrating sample magnetometry, inductively coupled plasma analysis, X‐ray diffraction and scanning electron microscopy. Copyright © 2015 John Wiley & Sons, Ltd.     

Zirconium oxide complex‐functionalized MCM‐41 nanostructure: an efficient and reusable mesoporous catalyst for oxidation of sulfides and oxidative coupling of thiols using hydrogen peroxide

Zirconium oxide complex‐functionalized mesoporous MCM‐41 (Zr‐oxide@MCM‐41) as an efficient and reusable catalyst is reported for the oxidation of sulfides into sulfoxides using hydrogen peroxide (H₂O₂) as the oxidant, with short reaction times in good to excellent yields at room temperature under solvent‐free conditions. Also, a simple and efficient method is reported for the oxidative coupling of thiols into corresponding disulfides in good to high yields using H₂O₂ as oxidant in the presence of Zr‐oxide@MCM‐41 as recoverable catalyst in ethanol at room temperature. A series of sulfides and thiols possessing functional groups was successfully converted into corresponding products. After completion of reactions the catalyst was easily separated with simple filtration from the reaction mixture and reused for several consecutive runs without significant loss of catalytic efficiency. The mesoporous catalyst was characterized using Fourier transform infrared spectroscopy, Brunauer–Emmett–Teller surface area measurements, X‐ray diffraction, transmission and scanning electron microscopies, energy‐dispersive X‐ray spectroscopy and thermogravimetric analysis. Copyright © 2015 John Wiley & Sons, Ltd.     

Preparation and catalysis of chloromethylated polystyrene‐supported macrocyclic Schiff base metal complexes for the oxidation of cumene

Chloromethylated polystyrene‐supported macrocyclic Schiff base metal complexes (PS‐L‐M, M = Cu²⁺, Co²⁺, Ni²⁺, and Mn²⁺) were synthesized and characterized by the methods of IR, ICP, and small area X‐ray photoelectron spectroscopy (XPS). The oxidation of cumene by molecular oxygen in the absence of solvent with the synthesized complexes employed as catalyst was carried out. In comparison with their catalytic activities, PS‐L‐Cu is a more effective catalyst for the oxidation of cumene. The main products are 2‐phenyl‐2‐propanol (PP) and cumene hydroperoxide, which were measured by GC/MS. The influences of reaction temperature, the amount of catalyst, as well as the reaction time on the oxidation of cumene were investigated. Copyright © 2008 John Wiley & Sons, Ltd.