Facile Electrospinning of CeO2/Bi2WO6 Heterostructured Nanofibers with Excellent Visible‐light‐driven Photocatalytic Performance

One‐dimensional (1D) CeO₂/Bi₂WO₆ heterostructured nanofibers with a diameter of about 300 nm were successfully synthesized by using a straightforward strategy combining an electrospinning technique with a sintering process. The acquired products were characterized by thermogravimetric and differential scanning calorimetric (TG‐DSC), Fourier transform infrared (FT‐IR) spectroscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM), X‐ray diffraction (XRD), X‐ray photoelectron spectroscopy (XPS), Brunauer–Emmett–Teller (BET) surface area measurements, and UV/Vis spectroscopy. The obtained CeO₂/Bi₂WO₆ heterostructured nanofibers exhibited an excellent photocatalytic property for the degradation of Rhodamine B (RhB) dye driven by visible light due to the promoted separation of photoelectrons and holes and the large contact area between the photocatalyst and organic pollutant.     

可见光响应型Bi2WO6光催化剂

Bi₂WO₆作为一种新型半导体光催化剂,具有较窄的带隙宽度和特殊的层状结构,因而显示出良好的可见光催化性能。本文综述了围绕提高Bi₂WO₆的光催化活性和实用性而开展的相关研究成果,包括:纳米结构Bi₂WO₆材料;分级超结构Bi₂WO₆材料;Bi₂WO₆光催化剂的系列修饰改性,如金属氧化物复合、碳烯和金属单质的表面沉积,以及金属离子和非金属离子的掺杂等。此外,还从回收角度综述了Bi₂WO₆的固定化技术。最后对Bi₂WO₆光催化剂的发展趋势进行了展望,强调对Bi₂WO₆进行带隙调控,并加强对其异质结构界面状态的研究,通过理论计算可深入理解光催化机制,以从制备入手指导现有催化剂的改良和设计新型光催化剂。     

Influence of surfactants on the morphology and photocatalytic activity of Bi_2WO_6 by hydrothermal synthesis

The flower-like microsphere Bi2WO6 with an average diameter of 2.5 μm is synthesized by a simple hydrothermal method in the presence of surfactant sodium dodecyl sulfate (SDS) or polyvinylpyrrolidone (PVP).The crystalline phase,compositions,morphology,microstructure,surface area and band gap energy of the Bi2WO6 are characterized by X-ray diffraction,X-ray energy-dispersive spectrum,scanning electron microscopy,transmission electron microscopy and absorption spectra.It is found that surfactant has a signifi...     

制备方法对复合氧化物Bi_2WO_6-ZrO_2-TiO_2光催化性能的影响

采用一积沉淀法和两积沉淀法分别制备了Bi2WO6-ZrO2-TiO2复合催化剂。利用X射线衍射(XRD),N2吸附(BET),傅里叶变换(FT-IR)光谱技术,X光电子能谱(XPS),紫外-可见(UV-Vis)漫反射光谱等分析技术对样品进行了表征。结果显示,两积沉淀法的Bi、W离子存在于催化剂表面,而一积沉淀法是进入催化剂晶格。利用气相苯进行催化剂的紫外和可见光活性实验,结果表明,两积沉淀法制备的复合催化剂活性最高。     

圆盘状Bi2WO6-BiPO4异质结的水热合成及光催化性能

采用水热法制备Bi2WO6-BiPO4异质结光催化剂．利用模拟太阳光照射下的罗丹明B降解实验评价了Bi2WO6-BiPO4复合物的光催化性能．结果表明,Bi2WO6-BiPO4光催化活性比Bi2WO6和BiPO4高得多．当Bi2WO6与BiPO4的摩尔比为1：1时复合光催化剂对罗丹明B的降解率最高．Bi2WO6-BiPO4催化活性增强主要归结为两者之间形成了有效的异质结结构,其内建电场能够促进光生载流子的分离．同时,Bi2WO6的加入增强了其对可见光的吸收．研究表明O2^· -和h^＋在光催化降解过程中是主要的活性物种.     

亚硫酸盐协助中空Bi2WO6微球的光催化性能

本文利用亚硫酸盐与Bi2WO6协同作用,有效地提升其光催化活性。以甲基橙和抗生素环丙沙星(CIP)作为被降解物对该体系的光催化降解性能和机理进行了研究。结果表明:光催化活性增强主要原因为亚硫酸盐能与Bi2WO6的光生空穴及羟基自由基反应,不仅能生成新的活性物质亚硫酸自由基(SO3^2-),还能促进Bi2WO6光生电子—空穴对的分离。此外,还考察了催化剂的用量、和污染物的浓度对该体系光催化性能的影响。     

异质结Bi_2WO_6/ZnO复合光催化剂的制备及其光催化降解含酚废水的研究

采用水热法制备了一系列Bi2WO6/Zn O异质结光催化剂,并对其进行X射线衍射(XRD)、紫外-可见光谱(UV-Vis DRS)、扫描电镜(SEM)、光电子能谱(EDS)等手段对其结构性质进行了表征。在含酚废水的液相反应体系中,研究了异质结Bi2WO6/Zn O复合光催化剂光催化降解苯酚的性能。结果表明,Bi2WO6/Zn O异质结的形成可以有效的抑制光生电子和空穴对的结合,使其光催化活性明显优于纯的Zn O和Bi2WO6;另外,异质结型Bi2WO6/Zn O复合光催化剂的表面OH·自由基更有利于光催化活性的提高。当Bi2WO6复合量为4wt%时,异质结Bi2WO6/Zn O复合光催化剂光催化降解苯酚的效果最佳。     

增强光催化活性的3D分级结构Bi2W06微球及表面酸性

以KNO3为矿化剂,用水热法制备了3D分级结构Bi2WO6微球,通过XRD、SEM、BET对产物进行了表征．探讨了3D分级结构Bi2WO6微球可能的形成机理．以罗丹明B为模型污染物,研究了合成产物的光催化性质．结果表明：在紫外光下,RhB的降解以共轭结构断裂的光催化反应为主;而在可见光照射下,RhB的降解可能是光催化和光敏化共同作用的结果．进一步以吡啶为探针分子,通过吸附吡啶红外光谱探讨了Bi2W06表面酸性与光催化降解RhB之间的关系．研究显示,Bi2W06具有较强的表面酸性,增强了Bi2WO6与RhB分子之间吸附作用,有利于染料分子上的电子跃迁至催化剂上,易于发生光敏化和光催化反应。     

Cu2+掺杂的Bi2O3的制备及光催化性能的研究

本文采用并流沉淀法制备了Cu2+掺杂的纳米Bi2O3光催化剂(Cu/Bi原子比分别为1%,2%,3%和4%)。以甲基橙模拟有机污染物对催化剂的光催化性能进行了考察。用比表面(BET)、X-射线粉末衍射(XRD)、X-射线光电子能谱(XPS),紫外-可见漫反射光谱(DRS)和表面光电压谱(SPS)对所制备的催化剂进行了表征。结果表明,Cu2+掺杂量为3%时制备的Bi2O3具有最高的比表面积、孔容、最小孔径和晶粒尺寸。对甲基橙的光催化脱色结果显示掺杂量为3%时Cu2+-Bi2O3表现出最佳的光催化活性。     

Novel hydrostable Z-scheme Ag/CsPbBr3/Bi2WO6 photocatalyst for effective degradation of Rhodamine B in aqueous solution

In this study, a hydrostable Z-scheme Ag/CsPbBr₃/Bi₂WO₆ photocatalyst was designed and fabricated for the degradation of Rhodamine B (RhB). The structural instability of CsPbX₃ perovskites in water is one of the main obstacles that restrict their practical application in photocatalytic wastewater treatment. The photocatalyst was prepared in three steps: passivation of CsPbBr₃ nanocrystals (NCs) with 3-mercaptopropionic acid (MPA), construction of a heterojunction between MPA-passivated CsPbBr₃ NCs and Bi₂WO₆ ultrathin nanosheets, and doping Ag nanoparticles as charge mediators in the heterojunction. The as-obtained 5%Ag/20%CsPbBr₃/Bi₂WO₆ exhibits good stability and excellent photocatalytic activity. The degradation rate is 93.9% in 120 min, which is 4.41 times than that of Bi₂WO₆.     

水热反应条件对多孔球状Bi2WO6光催化剂结构及性能的影响

采用水热法制备了Bi₂WO₆光催化剂, 考察了水热反应温度、 水热反应时间及前驱体溶液pH值等条件对其对乙烯可见光催化活性的影响, 并通过X射线衍射(XRD)、 扫描电子显微镜(SEM)、 紫外-可见漫反射光谱(UV-Vis DRS)和比表面积分析等对催化剂的晶相组成、 微观形貌和光学性质等进行表征. 结果表明, 在水热反应温度为120 ℃、 水热反应时间为12 h、 前驱体溶液pH=0.5条件下, Bi₂WO₆光催化剂经过各向异性生长以及自组装奥斯特瓦尔德成熟(Ostwald ripening)过程, 形成由二维纳米薄片自组装的多孔微球状结构, 有效增大了与乙烯气体的接触面积, 禁带宽度降至2.86 eV, 可见光响应范围拓宽, 表现出优异的光催化性能, 在可见光下240 min内对乙烯的降解率达到13.69%.     

Visible‐light‐driven photocatalytic degradation using Mn‐doped SrMoO4 nanoparticles

Mn‐doped SrMoO₄ nanocrystals were synthesized by thermal decomposition of metal–organic salt in an organic solvent with the doping content in the range 0–12 mol%. The structures, morphologies and optical properties were characterized using various techniques. The results suggest that Mo sites in the SrMoO₄ lattice are substituted by the Mn dopant, the adsorption bands are found to be shifted toward the visible light region and the band gap becomes narrower correspondingly. The photocatalytic performance of the as‐synthesized product was determined using the degradation of methylene blue by visible light irradiation. The photocatalytic performance is enhanced with Mn doping, and the optimal degradation rate is 85% in 140 min for 5 mol% Mn doping. The enhanced photocatalytic activity with Mn doping may be ascribed to the energy band adjustment and effective photogenerated electron–hole separation caused by the Mn doping. A possible photocatalytic mechanism is also discussed.     

鳞状BiOBr/Bi2WO6的合成及其吸附性能

采用一步水热法成功制备鳞状形貌的BiOBr/Bi₂WO₆复合物,通过X射线衍射（XRD）仪、扫描电子显微镜（SEM）、N2吸附/解吸附比表面测定仪（BET）、傅里叶变换红外（FT-IR）光谱等对复合物进行了表征。对比Bi₂WO₆与BiOBr的SEM照片,结合KBr的浓度实验,提出了BiOBr/Bi₂WO₆的鳞状形貌的形成机理。选取有机染料为吸附质,BiOBr/Bi₂WO₆为吸附剂进行了复合物吸附性能测试。结果表明,BiOBr/Bi₂WO₆对阳离子染料表现出优越的吸附性能,10 min对次甲基蓝（MB）的吸附率高达99%,优于常规的活性炭吸附剂。此外,BiOBr/Bi₂WO₆对有机染料的吸附行为符合准二级反应速率方程和Freundlich等温吸附模型。     

Facilitating a high‐performance photocatalyst for Suzuki reaction: Palladium nanoparticles immobilized on reduced graphene oxide‐doped graphitic carbon nitride

We prepared a non‐covalently coupled hybrid of reduced graphene oxide (rGO)‐doped graphitic carbon nitride (g‐C₃N₄) by freezing‐assisted assembly and calcination. Fourier transform infrared, Raman and X‐ray photoelectron spectroscopies and transmission electron microscopy confirmed that rGO was incorporated into the bulk g‐C₃N₄, which was an ideal support for loading Pd nanoparticles. The Pd nanoparticles with an average size of 4.57 nm were uniformly dispersed on the rGO‐doped g‐C₃N₄ surface. The layered structure provided large contact area of g‐C₃N₄ with rGO, further accelerating the electron transfer rate and inhibiting electron–hole recombination. Consequently, compared with Pd/rGO/g‐C₃N₄ and Pd/g‐C₃N₄, the Pd/rGO‐doped g‐C₃N₄ showed a prominent catalytic activity for visible‐light‐driven photocatalytic Suzuki–Miyaura coupling at ambient temperature. The Pd/rGO‐doped g‐C₃N₄ exhibited very high stability after six consecutive cycles with minimal loss of catalytic activity.     

Bi2WO6基光催化剂在环境和能源领域的最新研究进展

随着全球经济的快速发展与人口的日益膨胀,随之而来的能源消耗与环境污染也日益成为一个严峻的挑战.半导体光催化技术能够将低密度的太阳能转化为高密度的化学能,此外它能够通过产生活性自由基来降解空气或水中的污染物,因此在解决上述问题中具有巨大潜力,被认为是有着广阔前景的绿色无污染的能源转化和环境修复手段.在过去几十年的研究中,...     

Z-机制磷酸银/钨酸铋复合物的构建及其可见光催化降解有机污染物(英文)

环境危害不仅对人类健康构成巨大威胁,而且也阻碍了经济社会的快速发展.光催化剂通过利用太阳能来降解污染物为环境问题提供一条理想的途径.光催化剂的制备应该考虑以下几点:(1)对可见光响应;(2)高量子效率和稳定性;(3)安全、廉价、无毒的原材料.早期的一些催化剂如二氧化钛、氧化锌、硫化锌、锗酸锌和磷酸铋等在紫外线照射下表现出优秀的光催化活性.但是紫外光是稀有的,而且对人体健康有害.近年来,对宽带隙半导体的改性如掺杂、贵金属沉积、构建异质结或固溶体催化剂取得了有效进展.遗憾的是,受限于材料的固有属性,有限的改进仍然不能满足实际应用的需求.因此,探索高效稳定的可见光驱动的光催化剂依然是十分有意义的.磷酸银在可见光下表现出超强的光催化降解有机污染物和产氧的能力,但是磷酸银容易受到光腐蚀,光催化活性和稳定性很难维持.另外,磷酸银导带上的电子电势较正,这将导致其很难在光催化过程中被利用.而磷酸银导带上电子的积累会抑制其内部电子空穴对的分离,从而对磷酸银的光催化活性和稳定性造成不利影响.本文选择钨酸铋纳米片与磷酸银复合去抑制电子空穴对的复合和进一步提高磷酸银的活性和稳定性.样品的粉末X射线衍射、能谱和X光电子能谱的分析证实了磷酸银/钨酸铋复合物已经被成功合成.稳态荧光光谱证实了磷酸银/钨酸铋复合物的构建可以作为一种有效抑制电子和空穴对复合的手段.通过对样品进行光催化降解次甲基蓝的实验,我们发现磷酸银/钨酸铋复合材料展现出比磷酸银和钨酸铋更强的光催化活性.其中,磷酸银/钨酸铋光催化降解次甲基蓝的速率为0.61385 min~(-1),这是磷酸银(0.47179 min~(-1))和钨酸铋(0.10270 min~(-1))活性的1.3和6.0倍.同时,磷酸银/钨酸铋表现出耐久的稳定性,在连续五次光降解过程中几乎没有明显的活性损失.进一步通过对磷酸银/钨酸铋复合材料进行光催化活性成分的捕获实验,我们发现空穴、超氧负离子自由基和羟基自由基都发挥了一定的作用.最后,我们讨论了光催化机制,Z-机制光催化机制被认为是合理的.     

水热合成Bi2WO6/SC光催化剂及其光催化脱硝性能研究

以活性半焦(SC)为载体,采用水热法合成新型可见光催化剂Bi₂WO₆ /SC, 利用SEM、BET、XRD、FT-IR和紫外可见漫反射(UV-vis)光谱等系列手段对所制备的样品进行了表征,并以可见光(λ＞ 400 nm)为光源,模拟烟气中的NO为氧化脱除对象,进行光催化活性测试。 结果表明,通过水热法合成的Bi₂WO₆具有微米花形状,且光响应波长已扩展到400 nm以上的可见光区, Bi₂WO₆/SC光催化脱硝剂性能最好,反应4 h后脱硝率仍高于70%。     

Facile preparation of Ag/Ag2WO4/g‐C3N4 ternary plasmonic photocatalyst and its visible‐light photocatalytic activity

Introducing plasmonic metals into semiconductor materials has been proven to be an attractive strategy for enhancing photocatalytic activity in the visible region. In this work, a novel and efficient Ag/Ag₂WO₄/g‐C₃N₄ (AACN) ternary plasmonic photocatalyst was successfully synthesized using a facile one‐step in situ hydrothermal method. The composition, structure, morphology and optical absorption properties of AACN were investigated using X‐ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, and UV–visible diffuse reflectance spectroscopy, respectively. Photocatalytic performance of AACN was evaluated via rhodamine B and tetracycline degradation. The results indicated that AACN had excellent photocatalytic performance for rhodamine B degradation with a rate constant of 0.0125 min^?1, which was higher than those of Ag₂WO₄ and Ag/Ag₂WO₄. Characterization and photocatalytic tests showed that the strong coupling effect between the Ag/Ag₂WO₄ nanoparticles and the exfoliated ultrathin g‐C₃N₄ nanosheets was superior for visible‐light responsivity and reduced the recombination rate of photogenerated electrons and holes. A proposed mechanism is also discussed according to the band energy structure and the experimental results.     

Samarium and Nitrogen Co‐Doped Bi2WO6 Photocatalysts: Synergistic Effect of Sm3+/Sm2+ Redox Centers and N‐Doped Level for Enhancing Visible‐Light Photocatalytic Activity

Samarium and nitrogen co‐doped Bi₂WO₆ nanosheets were successfully synthesized by using a hydrothermal method. The crystal structures, morphology, elemental compositions, and optical properties of the prepared samples were investigated. The incorporation of samarium and nitrogen ions into Bi₂WO₆ was proved by X‐ray diffraction, energy dispersive X‐ray spectroscopy, and X‐ray photoelectron spectroscopy. UV/Vis diffuse reflectance spectroscopy indicated that the samarium and nitrogen co‐doped Bi₂WO₆ possessed strong visible‐light absorption. Remarkably, the samarium and nitrogen co‐doped Bi₂WO₆ exhibited higher photocatalytic activity than single‐doped and pure Bi₂WO₆ under visible‐light irradiation. Radical trapping experiments indicated that holes (h⁺) and superoxide radicals ( ^. O₂^?) were the main active species. The results of photoluminescence spectroscopy and photocurrent measurements demonstrated that the recombination rate of the photogenerated electrons and holes pairs was greatly depressed. The enhanced activity was attributed to the synergistic effect of the in‐built Sm³⁺/Sm²⁺ redox pair centers and the N‐doped level. The mechanism of the excellent photocatalytic activity of Sm‐N‐Bi₂WO₆ is also discussed.     

钨酸铋担载钯纳米粒子光催化甲苯及其衍生物到醛的氧化反应

甲苯及其衍生物的选择性氧化是化学工业中重要的一环.氧化产物醛、酮和酸类化合物是各种农药、染料、防腐剂、阻燃剂、香料、塑料的合成中间体.在传统的化工过程中,通常在苛刻的条件下,如高温、高压以及酸性溶剂中进行甲苯的选择性氧化.光催化有机合成作为一种"绿色"的合成方法受到越来越多的关注.我们发现钨酸铋作为可见光响应的光催化剂,可以利用氧气作为氧化剂,对甲苯及其衍生物进行催化氧化反应.通过调节水热法合成钨酸铋的酸碱条件,控制其成核生长过程,改变其形貌,发现在pH值为0.49时,得到花状钨酸铋粉末活性最高.X射线衍射、扫描电镜、紫外可见吸收光谱和比表面测定结果发现,花状钨酸铋粉末表现出最佳的甲苯氧化活性很可能是与它最大的比表面积有关系.为了进一步提高催化的活性,我们将助催化剂担载在钨酸铋粉末上,发现Pd的担载量为0.1 wt%时甲苯氧化反应活性最高.将邻、间、对位甲基取代以及对位甲氧基和氯取代的甲苯衍生物进行反应,发现均可高选择性地得到目标产物.在加入电子牺牲剂硝酸银和空穴牺牲剂草酸铵到反应体系后,发现反应被完全禁阻,说明在甲苯氧化反应过程中电子和空穴都起到了相应的作用.通过电化学测试发现,钯作为助催化剂担载在钨酸铋表面后,产生更强的氧化和还原信号,说明其在电子和空穴发生反应的过程中都起到了相应的促进作用.由此推测,在甲苯的氧化反应中,钨酸铋材料表面吸收可见光,产生光生电子和空穴,而钯的担载则促进了电子和空穴进行氧气还原和甲苯氧化的过程.