Comparison of sieving matrices for on-the-fly fluorescence lifetime detection of dye-labeled DNA fragments

Commercially available, replaceable sieving matrices and their solvent modulated forms were evaluated for use in on-the-fly fluorescence lifetime detection of dye-labeled DNA fragments in capillary electrophoresis. The fragments were labeled with dyes that can be excited by the 488 nm line of an argon ion laser and have lifetimes in the range of 0.8 ns to 3.8 ns. The sieving matrices and buffer systems included poly(vinylpyrrolidone) (PVP), poly(ethyleneoxide) (PEO), hydroxyethylcellulose (HEC), Tris-borate-EDTA (TBE) and Tris-TAPS-EDTA buffers modified with DMSO and formamide. Selection of the optimal sieving matrix is based on the separation efficiency and the enhancement of lifetime resolution of DNA fragments. Best results for both electrophoretic resolution and lifetime detection were obtained using a poly(ethyleneoxide)/TBE gel buffer in the presence of 10% formamide.     

On-line pre-concentration and UV determination of DNA fragments by dynamic coating capillary electrophoresis and its application to detection of genetically modified oilseed rape based on PCR

In this work, it was demonstrated that on-line pre-concentration and separation of DNA fragments within bared silica column by dynamic coating capillary electrophoresis and UV detection. The DNA fragments were pre-concentrated with long electrokinetic injecting time (99 s), peak height increased dramatically as a function of injection time, especially for shorter length DNA. The concentration sensitivity of DNA fragments can be improved from 20- to 100-fold relative to a normal injection (5 s). The electro-osmotic flow (EOF) and DNA-wall interactions within the capillary were eliminated effectively by dynamic coating method. Employing 0.5% poly(ethylene oxide) (PEO) in Tris-phosphate-EDTA (TBE) buffer as sieving matrix, DNA fragments, ranging from 11 to 657 bp, were separated within 20 min. The linear coefficient of linear relation between the migration and DNA length is 0.999. The DNA fragments amplified from transgenic oilseed rape by polymerase chain reaction (PCR) were separated and detected by this method, demonstrating the potential use of this method for effective DNA analysis and detection of genetically modified organisms (GMO).     

Mono- and bis-intercalating dyes for multiplex fluorescence lifetime detection of DNA restriction fragments in capillary electrophoresis

The use of novel intercalating dyes as labels in DNA restriction fragment analysis by capillary electrophoresis with frequency-domain fluorescence lifetime detection is described. The dyes, including one mono-intercalating dye with three positive charges and three bis-intercalating, homodimeric dyes with four positive charges, were excited by the 488 nm line of an argon ion laser and exhibited lifetimes in the range of 1-3 ns. The separations were performed using a gel containing 1% high-molecular-weight (HMW) hydroxyethylcellulose (HEC) (90,000-105,000) and 0.3% low-molecular-weight (LMW) HEC (24,000-27,000) in Tris-borate-EDTA buffer (TBE). Multiplex lifetime detection of mixtures of dye-labeled DNA restriction fragment digests and size standard fragments was achieved. Compared to previous results obtained with several mono-intercalating dyes of lesser charge (McIntosh, S. L., Nunnally, B. K., Nesbit, A. R., Deligeorgiev, T. G., Gadjev, N. I., McGown, L. B., Anal. Chem. 2000, 72, 5444-5449), the present dyes provided a wider range of lifetimes and better lifetime discrimination in multiplex detection. There was no evidence of dye exchange during the capillary electrophoresis experiment.     

A novel pathogen detection system based on high‐resolution CE‐SSCP using a triblock copolymer matrix

Although CE‐SSCP analysis combined with 16S ribosomal RNA gene‐specific PCR has enormous potential as a simple and versatile pathogen detection technique, low resolution of CE‐SSCP causes the limited application. Among the experimental conditions affecting the resolution, the polymer matrix is considered to be most critical to improve the resolution of CE‐SSCP analysis. However, due to the peak broadening caused by the interaction between hydrophobic moiety of polymer matrices and DNA, conventional polymer matrices are not ideal for CE‐SSCP analysis. A poly(ethyleneoxide)‐poly(propyleneoxide)‐poly(ethyleneoxide) (PEO‐PPO‐PEO) triblock copolymer, with dynamic coating ability and a propensity to form micelles to minimize exposure of hydrophobic PPO block to DNA, can be an alternative matrix. In this study, we examined the resolution of CE‐SSCP analysis using the PEO‐PPO‐PEO triblock copolymer as the polymer matrix and four same‐sized DNA fragments of similar sequence content. Among 48 commercially available PEO‐PPO‐PEO triblock copolymers, three were selected due to their transparency in the operable range of viscosity and PEO₁₃₇PPO₄₃PEO₁₃₇ exhibited the most effective separation. Significant improvement in resolution allowed discrimination of the similar sequences, thus greatly facilitated CE‐SSCP analysis compared to the conventional polymer matrix. The results indicate that PEO‐PPO‐PEO triblock copolymer may serve as an ideal matrix for high‐resolution CE‐SSCP analysis.     

Electrophoretic separation of DNA using a new matrix in uncoated capillaries

A new separation matrix, consisting of polymer poly(N-isopropylacrylamide) (PNIPAM) and small molecule additive mannitol, was used for double-stranded (ds) DNA and plasmid DNA separation by capillary electrophoresis. The matrix had a low viscosity, which made it very easy to handle. The additive mannitol dramatically enhanced the sieving performance of PNIPAM in TBE buffer. The optimal mannitol concentration 6% in polymer solution, was determined with the consideration of both speed and resolution. A resolution of 0.95 was achieved on the separation of 271/281 bp in the phiX174/HaeIII digest by using 1.5% PNIPAM + 6% mannitol, while the supercoiled, linear and nicked conformers of lambda plasmid were separated in 1% PNIPAM + 6% mannitol, demonstrating the potential use of this new matrix for effective DNA separations. The dramatic impact of mannitol on sieving performance of PNIPAM solution was investigated. pH dependent self-coating ability of PNIPAM was revealed. The presence of mannitol in TBE buffer decreased the pH of the buffer, which led to more efficient self-coating ability of PNIPAM probable due to the formation of hydrogen bonds between PNIPAM molecules and silanol groups at the silica wall.     

Identifying the orientation of DNA fragment in recombinant plasmid by capillary electrophoresis with a non-gel sieving solution.

It was demonstrated that a capillary electrophoresis (CE) method with a non-gel sieving solution has been developed to identify the orientation of DNA fragments in recombinant plasmids in molecular biology. The influences of the concentration of sieving polymer HEC, the applied electric field strength and sampling on CE separation were analyzed concerning the optimization of separation. YO-PRO-1 was used as a DNA intercalating reagent to facilitate fluorescence detection. Under the chosen conditions (buffer, 1 x TBE containing 1 microM YO-PRO-1 and 1.2% HEC; applied electric field strength, 200 V/cm; electrokinetic sampling: time, 5 s; voltage, -6 kV), three DNA markers (phi 174/HaeIII, pBR322/HaeIII and lambda DNA/HindIII) were tested for further evaluating the relationship between the DNA size and the mobility. The established CE method conjugated with the enzymatic approach was successfully applied to identifying the DNA orientation of recombinant plasmid in transgene operations of a newly cloned gene from Arabidopsis Thaliana.     

Separation of double-stranded DNA fragments by capillary electrophoresis using polyvinylpyrrolidone and poly(N,N-dimethylacrylamide) transient interpenetrating network

A noncross-linked interpenetrating polymer network (IPN), consisting of poly(N,N-dimethylacrylamide) (PDMA) and polyvinylpyrrolidone (PVP, weight-average molecular weight M(w) = 1 x 10(6) g/mol) was synthesized by polymerizing N,N-dimethylacrylamide (DMA) monomers directly in PVP buffer solution and tested as a separation medium for double-stranded (ds)DNA analysis without further purification. Due to the incompatibility of PVP and PDMA, a simple solution mixture could incur a microphase separation and showed poor performance on dsDNA separation. However, a dramatic improvement was achieved by the formation of an IPN. We attributed the high sieving ability of IPN as due to an increase in the number of entanglements by the more extended polymer chains. Apparent viscosity studies showed that the IPN had a much higher viscosity than the simple mixture containing the same amount of PDMA and PVP. In 1 x Tris-borate-EDTA (TBE) buffer, the concentration ratio of PDMA and PVP had a great effect on the DNA separation. At optimal conditions, the 22 fragments in pBR322/HaeIII DNA were successfully separated within 15 min, with a resolution of better than 1.0 for 123/124 bp.     

Poly(N-isopropylacrylamide)-g-poly(ethyleneoxide) for high resolution and high speed separation of DNA by capillary electrophoresis.

A new separation medium, poly(N-isopropylacrylamide)-g-poly(ethyleneoxide) (PNI-PAM-g-PEO) solution, used for double-stranded (ds) DNA separation by capillary electrophoresis (CE) is presented. This type of grafted copolymer has a good self-coating ability for quartz capillary tubing and a slightly temperature-dependent viscosity-adjustable property, making it easier to use. One bp resolution was achieved within 12.5 min by using 8% w/v PNIPAM-gPEO in 1 x TBE (Tris-borate-ethylenediaminetetraaceticacid) buffer with an effective column length of 10 cm and an applied electric field strength of 200 V/cm. The PNIPAM-g-PEO solutions had a high sieving ability for relatively small sized DNAs with the relative standard derivation for the first 10 runs being less than 0.9% by using the same polymer solution. With 8% w/v PNIPAM-g-PEO solution in a 1.5 cm column and 2400 V as the running voltage, phiX174/HaeIII digest could be clearly separated within 24 s.     

Nonconventional synthesis and characterization of ultrahigh-molar-mass polyacrylamides

In spite of the significant progresses in the field of replaceable sieving matrices for separating DNA in capillary electrophoresis (CE), an intense research activity is still going on to improve the separation of large size DNA sequencing fragments. There are evidences, both from experimental and theoretical sides that the resolution of these fragments, at the single base, requires the use of sieving matrices comprised of long chain linear polymers. In the separation of DNA fragments by CE are of upmost importance: (i) the complete solubility of the polymer, (ii) the linearity of the chain, (iii) the achievement of ultrahigh viscosity in dilute solutions. The aim of this work is the synthesis of ultrahigh-molecular-weight polymers which possess the three requirements mentioned above by employing a nonconventional method. We demonstrate that the sieving performance of polyacrylamide is directly correlated to its intrinsic viscosity.     

Triblock copolymer matrix‐based capillary electrophoretic microdevice for high‐resolution multiplex pathogen detection

Rapid and simple analysis for the multiple target pathogens is critical for patient management. CE‐SSCP analysis on a microchip provides high speed, high sensitivity, and a portable genetic analysis platform in molecular diagnostic fields. The capability of separating ssDNA molecules in a capillary electrophoretic microchannel with high resolution is a critical issue to perform the precise interpretation in the electropherogram. In this study, we explored the potential of poly(ethyleneoxide)‐poly(propyleneoxide)‐poly(ethyleneoxide) (PEO‐PPO‐PEO) triblock copolymer as a sieving matrix for CE‐SSCP analysis on a microdevice. To demonstrate the superior resolving power of PEO‐PPO‐PEO copolymers, 255‐bp PCR amplicons obtained from 16S ribosomal RNA genes of four bacterial species, namely Proteus mirabilis, Haemophilus ducreyi, Pseudomonas aeruginosa, and Neisseria meningitidis, were analyzed in the PEO‐PPO‐PEO matrix in comparison with 5% linear polyacrylamide and commercial GeneScan? gel. Due to enhanced dynamic coating and sieving ability, PEO‐PPO‐PEO copolymer displayed fourfold enhancement of resolving power in the CE‐SSCP to separate same‐sized DNA molecules. Fivefold input of genomic DNA of P. aeruginosa and/or N. meningitidis produced proportionally increased corresponding amplicon peaks, enabling correct quantitative analysis in the pathogen detection. Besides the high‐resolution sieving capability, a facile loading and replenishment of gel in the microchannel due to thermally reversible gelation property makes PEO‐PPO‐PEO triblock copolymer an excellent matrix in the CE‐SSCP analysis on the microdevice.     

Rapid separation and laser-induced fluorescence detection of mutated DNA by capillary electrophoresis in a self-coating, low-viscosity polymer matrix

The detection of point and other simple mutations in DNA is important for cancer research and diagnosis and other biological studies. Capillary electrophoresis has been successfully used for separating DNA fragments. However, a low-viscosity polymer sieving buffer for DNA separation with on-line coating has never been reported. In this paper, a new method using capillary electrophoresis with on-line coating and laser-induced fluorescence detection (CE-LIF) for screening for point or simple DNA mutations has been demonstrated. The method uses an on-line dynamic coating technique that increases capillary lifetime and analysis reproducibility, and employs a low-viscosity polymer solution, which allows the user to rinse the capillary rapidly and refill with polymer solution easily. Experiments proved that the additives in the separation buffer for on-line capillary coating do not affect the separation efficiency of the running buffer, and do not interfere with the formation of hydrogen-bonded network between boric acid, mannitol and hydroxypropylmethylcellulose polymers. The stability of the dynamically coated capillary was quantitatively studied; the capillary lifetime was increased 6- to 7-fold compared with that of permanently coated CE columns. Standard DNA fragments containing mutations, with sizes of 209, 219, and 338 bps, were successfully separated and detected with this system, after the mutated DNA fragments were cleaved by CEL-I endonuclease. The technique is very sensitive for the size-separation of low-range, middle-range, and high-range DNA fragments. Results were compared with the HPLC methods developed by Transgenomic, Inc. and were in good agreement. The method should be applicable to mutation detection for all relevant biological and clinical studies. The factors influencing separations and the stability of dynamic capillary coatings are also discussed in the paper.     

Inverse-flow derivatization for capillary electrophoresis of DNA fragments with laser-induced fluorescence detection

A novel method is presented to detect DNA fragments separated by capillary electrophoresis (CE) with laser-induced fluorescence (LIF) detection using inverse-flow derivatization. In electrophoresis, the intercalating dye, thiazol orange was only added to the separation buffer at the positive polarity. The negatively charged DNA fragments migrated from the negative polarity to the positive polarity, while the positively charged dye migrated in the opposite direction. When DNA fragments met with dye ions, the DNA–dye complexes were formed. The complexes continued migrating to the positive end, due to their net negative charges. When the complexes passed through the detection window, the fluorescent signals were generated. Importantly, DNA fragments migrated as their native state before DNA–dye complexes were formed. This procedure was used to detect double stranded DNA (dsDNA) and single stranded DNA (ssDNA) fragments, and polymerase chain reaction (PCR) products. The excellent resolution and good reproducibility of DNA fragments were achieved in non-gel sieving medium. This procedure may be useful in genetic mutation/polymorphism detections.     

Genotyping of α-thalassemia deletions using multiplex polymerase chain reactions and gold nanoparticle-filled capillary electrophoresis

A gold nanoparticle-filled capillary electrophoresis method combined with three multiplex polymerase chain reactions (PCRs) was established for simultaneous diagnosis of five common α-thalassemia deletions, including the -α^3.7 deletion, -α^4.2 deletion, Southeast Asian (- -^SEA), Filipino (- -^FIL) and Thai (- -^THAI) deletions. Gold nanoparticles (GNPs) were used as a pseudostationary phase to improve the resolution between DNA fragments in a low-viscosity polymer. To achieve the best CE separation, several parameters were evaluated for optimizing the separation conditions, including the capillary coating, the concentrations of polymer sieving matrix, the sizes and concentrations of GNPs, the buffer concentrations, and the pH. The final CE method for separating a 200-base pair (bp) DNA ladder and α-thalassemia deletions used a DB-17 capillary, 0.6% poly(ethylene oxide) (PEO) prepared in a mixture of GNP_32nm solution and glycine buffer (25 mM, pH 9.0) (80:20, v/v) as the sieving matrix with 1 μM YO-PRO-1 for fluorescence detection; the applied voltage was −10 kV (detector at anode side) and the separation temperature was 25 °C. Under these optimal conditions, 15 DNA fragments with sizes ranging from 0.2 kb to 3.0 kb were resolved within 11.5 min. The RSDs of migration times were less than 2.81%. A total of 21 patients with α-thalassemia deletions were analyzed using this method, and all results showed good agreement with those obtained by gel electrophoresis.     

Optimization of sequencing conditions using near-infrared lifetime identification methods in capillary gel electrophoresis

We have investigated the sample preparation and electrophoresis conditions necessary to prepare DNA sequencing samples appropriate for use with near-infrared (IR) fluorescent labels with dye identification accomplished via lifetime techniques. It was found that several sample preparation protocols required attention to maximize the fluorescence yields of the labeling dyes, such as thermal cycling conditions, choice of counter ion used for the ethanol precipitation step and also, dye-primer versus dye-terminator chemistries. In addition, several different sieving matrices were investigated for their effects on both the fluorescence properties of the labeling dyes and electrophoretic resolution. Extended times used for the high temperature denaturing of duplexed DNA fragments during cycle sequencing produced cleavage products, in which the covalently attached dye to the sequencing primer was released through attack by dithiothreitol (DTT). Even under optimized thermal cycling conditions, free dye was generated that masked readable data from the sequencing traces. Ethanol precipitation was necessary to remove this free dye with the proper choice of counter ion (sodium). The results using different sieving matrices indicated that linear polyacrylamides (LPAs) were appropriate for any fluorescence measurement, since they could readily be replaced between runs minimizing deleterious memory effects associated with cross-linked polyacrylamide gels. After investigation of several different sieving LPAs, the commercially available POP6 was found to be particularly attractive, since it produced good electrophoretic resolution, single exponential behavior for the near-IR dye series investigated herein, and also, discernible lifetime differences within the dye set. Finally, dye-terminator chemistry was also found to minimize bleeding in the gel matrix produced by large amounts of unextended dye-primer within the gel lane.     

Microchip gel electrophoresis with programmed field strength gradients for ultra-fast detection of canine T-cell lymphoma in dogs

This paper describes the applicability of microchip gel electrophoresis using a programmed field strength gradients (MGE-PFSG) method coupled with a polymerase chain reaction (PCR) for the ultra-fast diagnosis of canine T-cell lymphoma. The variable region in the T-cell receptor gamma (TCRgamma) gene from a T-cell lymphoma was used in PCR amplification. The contributions of the various parameters, including the effects of the molecular weight, concentration of the sieving matrix and field strength in MGE, were examined. 0.5% poly (ethyleneoxide) (PEO, M(r) 8000000) was used as the sieving matrix for the ultra-rapid separation of the amplified-PCR products (90 and 130-bp DNA fragments) from the PFSG at an effective length of 20mm in a glass microchip. The PCR products (90 and 130-bp DNA) of the T-cell lymphoma were analyzed within 41.7+/-0.1s, 15.5+/-0.2s and only 7.0+/-0.1s using a low-constant field strength, high-constant field strength and the PFSG, respectively. When 11 clinical samples were analyzed using the MGE-PFSG method, there was a 100% correlation with those obtained using conventional slab gel electrophoresis. The ultra-fast detection and rapid separation capabilities of MGE-PFSG make it an efficient tool for diagnosing T-cell lymphoma in clinical samples with high sensitivity.     

Ultra-fast simultaneous analysis of genetically modified organisms in maize by microchip electrophoresis with LIF detector

This study examined the potential of microchip electrophoresis (ME) with a LIF detector using a programmed field strength gradient (PFSG) in a conventional glass double-T microchip for the ultra-fast detection and simultaneous analysis of genetically modified (GM) maize. The separation efficiency and sensitivity at various sieving gels (poly(ethylene oxide) (PEO, M(r) 8,000,000) and 2-hydroxyethylcellulose (HEC) (M(r) 250,000)) and fluorescent dye concentrations were investigated. The PCR products of both the GM and non-GM maize were analyzed within 30 s under the PFSG (470.6 V/cm for 20 s, 117.6 V/cm for 12 s, and 470.6 V/cm for 30 s) with a 2.5% HEC sieving matrix in the running buffer, 1 x Tris-borate EDTA (TBE) (pH 8.30) and 0.5 ppm ethidium bromide. The five transgenic maize varieties (Event176, MON810, Bt11, GA21, and T25) examined in this study were also clearly differentiated by ME-PFSG within 30 s in a single run without any loss of resolution. The ME-PFSG technique is a powerful tool for the ultra-fast detection and simultaneous analysis of GMOs in a variety of foods including maize.     

Improved separation of double-stranded DNA fragments by capillary electrophoresis using poly(ethylene oxide) solution containing colloids

The analysis of double-stranded (ds) DNA fragments by capillary electrophoresis (CE) using poly(ethylene oxide) (PEO) solution containing gold nanoparticles (GNPs) is presented, focusing on evaluating size dependence of the GNPs and PEO on resolution and speed. To prevent the interaction of the capillary wall with DNA, the capillary was dynamically coated with polyvinylpyrrolidone. Using different PEO solutions containing GNPs ranging in diameter from 3.5 to 56 nm, we have achieved reproducible, rapid, and high-resolution DNA separations. The results indicate that the sizes of PEO and GNPs as well as the concentration of PEO affect resolution. The separation of DNA ranging in size from 8 to 2176 base pairs (bp) was accomplished in 5 min using 0.2% PEO (8 MDa) containing 56 nm GNPs. We have also demonstrated the separations of the DNA fragments ranging from 5 to 40 kbp using 0.05% PEO (2 MDa) containing 13 nm GNPs or 0.05% PEO (4 MDa) containing 32 nm GNPs. With very low viscosity (< 15 cP), automatic replacement of the sieving matrices is easy, indicating a great potential for high-throughput DNA analysis using capillary array electrophoresis systems.     

Low viscosity DNA sieving matrices for capillary electrophoresis

The rapid development of DNA capillary electrophoresis (CE) technology has increased the demand of new low viscosity sieving matrices with high separation capacity. The high throughput, resolution and automatic operation of CE systems have stimulated the application of the technique to different kinds of DNA analysis, including DNA sequencing, separation of restriction fragments, PCR products and synthetic oligonucleotides. In addition specific methods for PCR-based mutation assays for the study of known and unknown point mutations have been developed for use in CE. The key component for a large scale application of CE to DNA analysis is the availability of appropriate sieving matrices. This article gives an overview of the linear polymers used as DNA separation matrices with particular emphasis on the polymers that combine high sieving capacity, low viscosity and chemical resistance.     

DNA separation by capillary electrophoresis with hydrophilic substituted celluloses as coating and sieving polymers. Application to the analysis of genetically modified meals

A coating procedure based on the physical adsorption of hydroxypropyl cellulose onto the wall of a capillary column has been successfully used for the separation of DNA fragments up to 500 bp. The method uses a running Tris-phosphate-EDTA buffer containing 2-hydroxyethyl cellulose as sieving polymer. The separation procedure shows good reproducibility (measured as RSD%) for consecutive runs (<0.64), for different days (< 1.15) and capillaries (<2.15), short analysis times, and a long coating lifetime. Good reproducibility and efficiency are even achieved by performing the separation in the presence of additives such as ethidium bromide and mannitol. The method is applied to the detection of GMOs in soybean and maize meals with an accurate evaluation of the length of DNA sequences, previously amplified by polymerase chain reaction.     

A single-strand conformation polymorphism method for the large-scale analysis of mutations/polymorphisms using capillary array electrophoresis

We present a high-throughput single-strand conformation polymorphism (SSCP) method, performed on a commercially available capillary array DNA sequencer. We tested various sieving matrices and electrophoretic conditions, using 51 DNA fragments which included 45 fragments carrying only one single nucleotide polymorphism (SNP), 4 fragments having two SNPs and 2 fragments with insertion or deletion. Resolution of alleles was improved by increasing concentrations of both sieving matrices and buffers, and all examined polymorphisms of DNA fragments were detected, most of them (45 fragments) as clearly split allele peaks in heterozygotes. Allele frequencies of SNPs can be estimated accurately by determining the relative amounts of alleles in pooled DNA. In this method, the turn-around time for the analysis of 96 samples is less than 3 h. These results demonstrate that capillary array-based SSCP is an efficient and accurate technique for the large-scale quantitative analysis of mutations/polymorphisms.