Viscoelastic shear horizontal wave in graded and layered plates

In this paper, viscoelastic shear horizontal (SH) wave propagation in functionally graded material (FGM) plates and laminated plates are investigated. The controlling differential equation in terms of displacements is deduced based on the Kelvin–Voigt viscoelastic theory. The SH wave characteristics is controlled by two elastic constants and their corresponding viscous coefficients. By the Legendre polynomial series method, the asymptotic solutions are obtained. In order to verify the validity of the method, a homogeneous plate is calculated to make a comparison with available data. Through three different graded plates, the influences of gradient shapes on dispersion and attenuation are discussed. The viscous effects on the displacement and stress shapes are illustrated. The different boundary conditions are analyzed. The influential factors of the viscous effect are analyzed. Finally, two multilayered (two layer and five layer) viscoelastic plates that are composed of the same material volume fraction are calculated to show their differences from the graded plate.     

Characteristics of guided waves in graded spherical curved plates

An elastodynamic solution for the stress wave propagation in spherical curved plates composed of functionally graded materials (FGM) is presented. Properties of materials are assumed to vary in the direction of the thickness according to a known radial variation law (gradient field). The formulation is based on the linear three-dimensional elasticity. The Legendre orthogonal polynomial series expansion approach is used for determining the guided waves dispersion curves in functionally graded spherical curved plates. Our results from a homogeneous anisotropic spherical curved plate are compared with those published earlier to confirm the accuracy and range of applicability of this polynomial approach. Guided wave dispersion curves for graded spherical curved plates with different gradient fields are calculated, and the effects of the gradient field on the characteristics of guided waves are illustrated. Finally, dispersion curves for graded spherical curved plates at different ratios of inner radius to thickness are calculated to discover the influences of that ratio on the wave characteristics.     

功能梯度材料板中Lamb波传播特性研究

对材料性能参数沿厚度连续变化的横观各向同性热应力缓和型功能梯度材料板中Lamb波的传播问题,采用幂级数法,求得其相速度方程.借助数值算例,分析了参数梯度变化对Lamb波频散曲线的影响,并与相应陶瓷板和金属板中的频散曲线进行了对比.进一步研究了参数梯度变化对波结构的影响,揭示了Lamb波在这种非均质板中的传播行为,所得结果可以为功能梯度材料及结构的超声表征与检测提供理论依据.     

Buckling analysis of sandwich plates with FGM face sheets resting on elastic foundation with various boundary conditions: an analytical approach

This paper presents an analytical investigation on the buckling analysis of symmetric sandwich plates with functionally graded material (FGM) face sheets resting on an elastic foundation based on the first-order shear deformation plate theory (FSDT) and subjected to mechanical, thermal and thermo-mechanical loads. The material properties of FGM face sheets are assumed to be graded in the thickness direction according to a simple power law distribution in terms of the volume fractions of the constituents. The core layer is still homogeneous and made of an isotropic material. An analytical approach is used to reduce the governing equations of stability and then solved using an analytical solution which is named as power series Frobenius method for symmetric sandwich plates with six different boundary conditions. A detailed numerical study is carried out to examine the influence of the plate aspect ratio, side-to-thickness ratio, loading type, sandwich plate type, volume fraction index, elastic foundation coefficients and boundary conditions on the buckling response of FGM sandwich plates. This has not been done before and serves to fill the gap of knowledge in this area.     

Effects of SH waves in a functionally graded plate

A computational method is presented to investigate SH waves in functionally graded material (FGM) plates. The FGM plate is first divided into quadratic layer elements (QLEs), in which the material properties are assumed as a quadratic function in the thickness direction. A general solution for the equation of motion governing the QLE has been derived. The general solution is then used together with the boundary and continuity conditions to obtain the displacement and stress in the wave number domain for an arbitrary FGM plate. The displacements and stresses in the frequency domain and time domain are obtained using inverse Fourier integration. Furthermore, a simple integral technique is also proposed for evaluating modified Bessel functions with complex valued order. Numerical examples are presented to demonstrate this numerical technique for SH waves propagating in FGM plates.     

热环境中功能梯度圆形薄板的混沌运动

针对陶瓷-金属功能梯度圆板,同时考虑几何非线性、材料物性参数随温度变化且材料组分沿厚度方向按幂律分布的情况,应用虚功原理给出了热载荷与横向简谐载荷共同作用下的非线性振动偏微分方程。在固支无滑动的边界条件下,通过引入位移函数,利用伽辽金方法得到了达芬型非线性动力学方程。利用Melnikov方法,给出了热环境中功能梯度圆板可能发生混沌运动的临界条件。通过数值算例,给出了不同体积分数指数和温度的同宿分岔曲线,平面相图和庞加莱映射图,讨论其对临界条件的影响,证实了系统混沌运动的存在。通过分岔图和与其相对应的最大李雅普诺夫指数图,分析了激励频率和激励幅值对倍周期分岔的影响及变化规律,发现系统可出现周期、倍周期和混沌等复杂动力学响应。     

Circumferential wave in magneto-electro-elastic functionally graded cylindrical curved plates

Piezoelectric-piezomagnetic functionally graded materials (FGM), with a gradual change of the mechanical and electromagnetic properties, have greatly applying promises. Based on Legendre orthogonal polynomial series expansion approach, a dynamic solution is presented for the propagation of circumferential harmonic waves in piezoelectric-piezomagnetic FGM cylindrical curved plates. The materials properties are assumed to vary in the direction of the thickness according to a known variation law. The dispersion curves of the piezoelectric-piezomagnetic FGM cylindrical curved plate and the corresponding non-piezoelectric and non-piezomagnetic cylindrical curved plates are calculated to show the influences of the piezoelectricity and piezomagnetism. Electric potential and magnetic potential distributions are also obtained to illustrate the different influences of the piezoelectricity and piezomagnetism. Finally, a cylindrical curved plate at a different ratio of radius to thickness is calculated to show the influence of the ratio on the piezoelectric effect and piezomagnetic effect.     

Nonlinear bending and post-buckling of a functionally graded circular plate under mechanical and thermal loadings

Based on the classical nonlinear von Karman plate theory, axisymmetric large deflection bending of a functionally graded circular plate is investigated under mechanical, thermal and combined thermal–mechanical loadings, respectively, and axisymmetric thermal post-buckling behavior of a functionally graded circular plate is also investigated. The mechanical and thermal properties of functionally graded material (FGM) are assumed to vary continuously through the thickness of the plate, and obey a simple power law of the volume fraction of the constituents. Governing equations for the problem are derived, and then a shooting method is employed to numerically solve the equations. Effects of material constant n and boundary conditions on the temperature distribution, nonlinear bending, critical buckling temperature and thermal post-buckling behavior of the FGM plate are discussed in details.     

Stochastic analysis of a thermoelastic problem in functionally graded plates with uncertain material properties

The statistics (i.e., mean and variance) of temperature and thermal stress are analytically obtained in functionally graded material (FGM) plates with uncertainties in the thermal conductivity and coefficient of linear thermal expansion. These FGM plates are assumed to have arbitrary nonhomogeneous thermal and mechanical properties through the entire thickness of plate and are subjected to deterministic convective heating. The stochastic temperature and thermal stress fields are analysed by assuming the FGM plate is multilayered with distinct, random thermal conductivity and coefficient of linear thermal expansion in each layer. Vodicka’s method, which is a type of integral transform method, and a perturbation method are employed to obtain the analytical solutions for the statistics. The autocorrelation coefficients of each random property and cross-correlation coefficients between different random properties are expressed in exponential function forms as a non-homogeneous Markov random field of discrete space. Numerical calculations are performed for FGM plates composed of partially stabilised zirconia (PSZ) and austenitic stainless steel (SUS304), which have the largest dispersion of the random properties at the place where the volume fractions of the two constituent materials are both 0.5. The effects of the spatial change in material composition, thermal boundary condition and correlation coefficients on the standard deviations of the temperature and thermal stress are discussed.     

Three-dimensional stress and free vibration analyses of functionally graded plates with circular holes by the use of the graded finite element method

Static and free vibration analyses of plates with circular holes are performed based on the three-dimensional theory of elasticity. The plates are made of a functionally graded material (FGM), and the volume fractions of the constituent materials vary continuously across the plate. The effective properties of the FGM plate are estimated by using the Mori–Tanaka homogenization method. A graded finite element method based on the Rayleigh–Ritz energy formulation is used to solve the problem. Effects of different volume fractions of the materials and hole sizes on the behavior of FGM plates under uniaxial tension are investigated. Natural frequencies of a fully clamped FGM plate with a circular cutout are derived. The results obtained are compared with available experimental data.     

非保守力下温度场中FGM圆板的非线性力学行为

研究了温度场中非保守功能梯度材料(FGM)圆板的非线性力学行为.基于经典板理论,推导了受非保守力作用的FGM圆板在温度场中的控制微分方程.采用打靶法分析了由陶瓷二氧化锆和金属钛合金两相材料组成的非保守FGM圆板在均匀和非均匀升温场中的非线性力学行为.给出了不同均匀升温和非均匀升温场下,FGM圆板在非保守载荷作用下的平衡...     

A finite element study on the large amplitude flexural vibration characteristics of FGM plates under aerodynamic load

The large amplitude flexural vibration characteristics of functionally graded material (FGM) plates are investigated here using a shear flexible finite element approach. Material properties of the plate are assumed to be graded in the thickness direction according to a simple power-law distribution in terms of volume fractions of the constituents. The effective material properties are then evaluated based on the rule of mixture. The FGM plate is modeled using the first-order shear deformation theory based on exact neutral surface position and von Kármán’s assumptions for large displacement. The third-order piston theory is employed to evaluate the aerodynamic pressure. The governing equations of motion are solved by harmonic balance method to study the vibration amplitude of FGM plates under supersonic air flow. Thereafter, the non-linear equations of motion are solved using Newmark’s time integration technique to understand the flexural vibration behavior of FGM plates in time domain (simple harmonic or periodic or quasi-periodic). This work is new in the sense that it deals with the non-linear flutter characteristics of FGM plates under high supersonic airflow accounting for both the geometric and aerodynamic non-linearities. Some parametric study is conducted to understand the influence of these non-linearities on the flutter characteristics of FGM plates.     

Postbuckling of FGM plates with piezoelectric actuators under thermo-electro-mechanical loadings

A postbuckling analysis is presented for a simply supported, shear deformable functionally graded plate with piezoelectric actuators subjected to the combined action of mechanical, electrical and thermal loads. The temperature field considered is assumed to be of uniform distribution over the plate surface and through the plate thickness and the electric field considered only has non-zero-valued component E_Z. The material properties of functionally graded materials (FGMs) are assumed to be graded in the thickness direction according to a simple power law distribution in terms of the volume fractions of the constituents, and the material properties of both FGM and piezoelectric layers are assumed to be temperature-dependent. The governing equations are based on a higher order shear deformation plate theory that includes thermo-piezoelectric effects. The initial geometric imperfection of the plate is taken into account. Two cases of the in-plane boundary conditions are considered. A two step perturbation technique is employed to determine buckling loads and postbuckling equilibrium paths. The numerical illustrations concern the postbuckling behavior of perfect and imperfect, geometrically mid-plane symmetric FGM plates with fully covered or embedded piezoelectric actuators under different sets of thermal and electric loading conditions. The effects played by temperature rise, volume fraction distribution, applied voltage, the character of in-plane boundary conditions, as well as initial geometric imperfections are studied.     

Transient wave propagation of isotropic plates using a higher-order plate theory

Transient wave propagation of isotropic thin plates using a higher-order plate theory is presented in this paper. The aim of this investigation is to assess the applicability of the higher-order plate theory in describing wave behavior of isotropic plates at higher frequencies. Both extensional and flexural waves are considered. A complete discussion of dispersion of isotropic plates is first investigated. All the wave modes and wave behavior for each mode in the low and high-frequency ranges are provided in detail. Using the dispersion relation and integral transforms, exact integral solutions for an isotropic plate subjected to pure impulse load and a number of wave excitations based on the higher-order theory are obtained and asymptotic solutions which highlight the physics of waves are also presented. The axisymmetric three-dimensional analytical solutions of linear wave equations are also presented for comparison. Results show that the higher-order theory can predict the wave behavior closely with exact linear wave solutions at higher frequencies.     

An inverse problem for a functionally graded elliptical plate with large deflection and slightly disturbed boundary

This paper deals with the inverse problem of a functionally graded material (FGM) elliptical plate with large deflection and disturbed boundary under uniform load. The properties of functionally graded material are assumed to vary continuously through the thickness of the plate, and obey a simple power law expression based on the volume fraction of the constituents. Based on the classical nonlinear von Karman plate theory, the governing equations of a thin plate with large deflection were derived. In order to solve this non-classical problem, a perturbation technique was employed on displacement terms in conjunction with Taylor series expansion of the disturbed boundary conditions. The displacements of in-plane and transverse are obtained in a non-dimensional series expansion form with respect to center deflection of the plate. The approximate solutions of displacements are solved for the first three terms, and the corresponding internal stresses can also be obtained.     

Mechanical buckling and free vibration of thick functionally graded plates resting on elastic foundation using the higher order B-spline finite strip method

In this study, the mechanical buckling and free vibration of thick rectangular plates made of functionally graded materials (FGMs) resting on elastic foundation subjected to in-plane loading is considered. The third order shear deformation theory (TSDT) is employed to derive the governing equations. It is assumed that the material properties of FGM plates vary smoothly by distribution of power law across the plate thickness. The elastic foundation is modeled by the Winkler and two-parameter Pasternak type of elastic foundation. Based on the spline finite strip method, the fundamental equations for functionally graded plates are obtained by discretizing the plate into some finite strips. The results are achieved by the minimization of the total potential energy and solving the corresponding eigenvalue problem. The governing equations are solved for FGM plates buckling analysis and free vibration, separately. In addition, numerical results for FGM plates with different boundary conditions have been verified by comparing to the analytical solutions in the literature. Furthermore, the effects of different values of the foundation stiffness parameters on the response of the FGM plates are determined and discussed.     

面内预应力功能梯度材料矩形板的横向弯曲

功能梯度材料（FGM)是一类具有广阔应用前景的新型复合材料。本文考虑材料物性参数随坐标和温度变化的特性，研究横向荷载和面内预加荷载作用下FGM矩形板在各种边界条件下的弯曲问题。给出了基于一维微分求积格式的Galerkin技术的半解析方法，并以ZrO2/Ti-6Al-4V板为例考察了材料组分，温度相关性，面内预加荷载，边界约束条件等对FGM板弯曲行为的影响。结果表明，FGM板的弯曲变形介于各向同性陶瓷板与各向同性金属板之间，且随板抗弯刚度的增大而逐步减小，在高温下条件下必须考虑材料物性和温度的相关性。     

An analytical solution for buckling of moderately thick functionally graded sector and annular sector plates

In this article, an analytical solution for buckling of moderately thick functionally graded (FG) sectorial plates is presented. It is assumed that the material properties of the FG plate vary through the thickness of the plate as a power function. The stability equations are derived according to the Mindlin plate theory. By introducing four new functions, the stability equations are decoupled. The decoupled stability equations are solved analytically for both sector and annular sector plates with two simply supported radial edges. Satisfying the edges conditions along the circular edges of the plate, an eigenvalue problem for finding the critical buckling load is obtained. Solving the eigenvalue problem, the numerical results for the critical buckling load and mode shapes are obtained for both sector and annular sector plates. Finally, the effects of boundary conditions, volume fraction, inner to outer radius ratio (annularity) and plate thickness are studied. The results for critical buckling load of functionally graded sectorial plates are reported for the first time and can be used as benchmark.     

Mechanical behavior of functionally graded material plates under transverse load—Part I: Analysis

An elastic, rectangular, and simply supported, functionally graded material (FGM) plate of medium thickness subjected to transverse loading has been investigated. The Poisson’s ratios of the FGM plates are assumed to be constant, but their Young’s moduli vary continuously throughout the thickness direction according to the volume fraction of constituents defined by power-law, sigmoid, or exponential function. Based on the classical plate theory and Fourier series expansion, the series solutions of power-law FGM (simply called P-FGM), sigmoid FGM (S-FGM), and exponential FGM (E-FGM) plates are obtained. The analytical solutions of P-, S- and E-FGM plates are proved by the numerical results of finite element method. The closed-form solutions illustrated by Fourier series expression are given in Part I of this paper. The closed-form and finite element solutions are compared and discussed in Part II of this paper. Results reveal that the formulations of the solutions of FGM plates and homogeneous plates are similar, except the bending stiffness of plates. The bending stiffness of a homogeneous plate is Eh³/12(1 − ν²), while the expressions of the bending stiffness of FGM plates are more complicated combination of material properties.     

Nonlinear Transient Response of Functionally Graded Material Sandwich Doubly Curved Shallow Shell Using New Displacement Field

In this paper, the nonlinear transient dynamic response of functionally graded material(FGM) sandwich doubly curved shell with homogenous isotropic material core and functionally graded face sheet is analyzed using a new displacement field on the basis of Reddy's third-order shear theory for the first time. The equivalent material properties for the FGM face sheet are assumed to obey the rule of simple power law function in the thickness direction.Based on Reddy'stheory of higher shear deformation, a new displacement field is developed by introducing the secant function into transverse displacement. Four coupled nonlinear differential equations are obtained by applying Hamilton's principle and Galerkin method. It is assumed that the FGM sandwich doubly curved shell is subjected to step loading, air-blast loading,triangular loading, and sinusoidal loading, respectively. On the basis of double-precision variablecoefficient ordinary differential equation solver, a new program code in FORTRAN software is developed to solve the nonlinear transient dynamics of the system. The influences of core thickness, volume fraction, core-to-face sheet thickness ratio, width-to-thickness ratio and blast type on the transient response of the shell are discussed in detail through numerical simulation.