Platinum(IV) analogues of AMD473 (cis-[PtCl2(NH3)(2-picoline)]): preparative, structural, and electrochemical studies

The preparation and oxidation of the anticancer drug AMD473, cis-[PtCl2(NH3)(2-pic)] (2-pic = 2-methylpyridine), has been investigated. cis-[PtCl2(NH3)(2-pic)] is readily oxidized with peroxide to give the trans-dihydroxoplatinum(IV) complex cis,trans,cis-[PtCl2(OH)2(NH3)(2-pic)]. The crystal structure of this complex reveals that it is highly strained as a result of a steric clash between the methyl group of the 2-picoline ligand and an axial hydroxo ligand, with the Pt-N-C angle adjacent to this clash opened up to an unprecedented 138.6(6) degrees . Attempts at converting the dihydroxoplatinum(IV) complex to dichloro and diacetato analogues were unsuccessful with reaction with HCl leading to loss and protonation of the 2-picoline ligand to form the salt (2-picH)[PtCl5(NH3)] and the platinum(II) complex cis-[PtCl2(NH3)(2-pic)], both confirmed by crystallography. Electrochemical studies revealed that cis,trans,cis-[PtCl2(OH)2(NH3)(2-pic)] is reduced more readily (-714 mV vs Ag/AgCl) than its pyridine analogue cis,trans,cis-[PtCl2(OH)2(NH3)(pyridine)] (-770 mV vs Ag/AgCl) consistent with the steric clash in the former complex destabilizing the platinum(IV) oxidation state.     

G-G base-pairing in nucleobase adducts of the anticancer drug cis-[PtCl2(NH3)(2-picoline)] and its trans isomer

cis-[PtCl2(NH3)(2-picoline)] (AMD473) is a sterically-hindered anticancer complex with a profile of chemical and biological activity that differs significantly from that of cisplatin. Adducts of AMD473 with neutral 9-ethylguanine (9-EtGH) and anionic (N1-deprotonated) 9-ethylguanine (9-EtG) as perchlorate and nitrate salts, and also a nitrate salt of the trans isomer (AMD443), were prepared and their structures determined by X-ray crystallography: cis-[Pt(NH3)(2-pic)(9-EtGH)2](ClO4)2 (1).2H(2)OMe(2)CO, cis-[Pt(NH3)(2-pic)(9-EtGH)2](NO3)2 (2).2H2O, cis-[Pt(NH3)(2-pic)(9-EtGH)(9-EtG)]NO3 (3),3.5 H2O, trans-[Pt(NH3)(2-pic)(9-EtGH)(9-EtG)]NO3 (4).8H2O. In all cases, platinum coordination is through N7 of neutral (1, 2) and anionic (3, 4) guanine. In each complex, the guanine bases are arranged in the head-to-tail conformation. In complex 1, there is an infinite array of six-molecule cycles, based on both hydrogen bonding and pi-pi stacking of the 2-picoline and guanine rings. Platinum(II) coordinated at N7 acidifies the N1 proton of neutral 9-ethylguanine (pKa = 9.57) to give pKa1 = 8.40 and pKa2 = 8.75 for complex 2, and pKa1 = 7.77 and pKa2 = 9.00 for complex 4. In complexes 3 and 4, three intermolecular hydrogen bonds are formed between neutral and deprotonated guanine ligands involving O6, N1 and N2 sites. Unusually, both of the platinated guanine bases of complexes 3 and 4 participate in this triple G triple bond G hydrogen bonding. This is the first report of X-ray crystal structures of nucleobase adducts of the promising anticancer drug AMD473.     

Molybdenum(V) on an oxide string. Formation and solution stability of the linear complex (mu-trans-dioxo(tetraphenylporphyrinato)molybdenato(V))- bis(oxo(tetraphenylporphyrinato)molybdenum(V)) perchlorate

The unusual linear trinuclear complex [Mo3O4(TPP)3]+ is formed in solution upon the reaction of [MoO(TPP)-(OClO3)] with [[MoO(TPP)]2O], and an equilibrium between [Mo3O4(TPP)3]+ and its constituent species is rapidly established. Spectrophotometric experiments suggest that [Mo3O4(TPP)3]+ is the predominant species found in solutions resulting from the mixture of [MoO(TPP)(OClO3)] and [[MoO(TPP)]2O], and its formation is strongly favored (log K = 5.5 +/- 0.5 M-1). No evidence of higher oligomers has been observed. A mechanism for the formation of [Mo3O4(TPP)3]+ by the controlled hydrolysis of [MoO(TPP)(OClO3)] is proposed.     

Synthesis and characterization of molybdenum oxo complexes of two tripodal ligands: reactivity studies of a functional model for molybdenum oxotransferases

Reaction of the tetradentate ligand N-(2-hydroxybenzyl)-N,N-bis(2-pyridylmethyl)amine (L-OH) with MoO2Cl2 in methanol in the presence of NaOMe and PF6- results in the formation of [MoO2(L-O)]PF6. Similarly, the reaction of N-(2-mercaptobenzyl)-N,N-bis(2-pyridylmethyl)amine (L-SH) with MoO2(acac)2 leads to the formation of [MoO2(L-S)]+. The dioxo-molybdenum complex [MoO2(L-O)]+ reacts with phosphines in methanol to afford phosphine oxides and an air-sensitive molybdenum complex, tentatively identified as [Mo(IV)O(L-O)(OCH3)]. The latter complex is capable of reducing biological oxygen donors such as DMSO or nitrate, thereby mimicking the activity of DMSO reductase and nitrate reductase. Reaction of [MoO2(L-O)]PF6 with PPh3 in other solvents than methanol leads to the formation of the Mo(V) dimer [(L-O)OMo(micro-O)MoO(L-O)](PF6)2. The crystal structures of [MoO2(L-O)]PF6 and the micro-oxo bridged dimer are presented.     

Spectroscopic and thermal studies of chromium(III), molybdenum(VI) and ruthenium(0) complexes of maleic hydrazide

Interaction of maleic hydrazide (LH(2)) with [Cr(CO)(6)] in air at atmospheric pressure resulted in the formation of the complex [(LH)Cr(mu-O)(2)Cr(LH)] (1). Reaction of LH(2) with [Mo(CO)(6)] in air also gave the complex [(LH(2))O(2)Mo(mu-O)(2)MoO(2)(LH(2))] (2). Under the same conditions, the reaction of LH(2) with [Ru(3)(CO)(12)] resulted in the formation of the tricarbonyl complex [Ru(CO)(3)(LH(2))] (3). The complexes were characterized by elemental analysis, IR, and (1)H NMR spectroscopy. The thermal properties of the complexes were investigated by thermogravimetry technique.     

Low-coordinate chromium siloxides: the "box" [Cr(mu-Cl)(mu-OSitBu3)]4, distorted trigonal [(tBu3SiO)3Cr][Na(benzene)] and [(tBu3SiO)3Cr][Na(dibenzo-18-c-6)], and trigonal (tBu3SiO)3Cr

Treatment of CrCl(2)(THF)(2) with NaOSi(t)Bu(3) afforded the tetrameric "box" [Cr(mu-Cl)(mu-OSi(t)Bu(3))](4) (1, X-ray). THF cleaved 1 to provide trans-(silox)ClCr(THF)(2) (2), whereas degradation of 1 with 4-picoline caused disproportionation and the generation of trans-Cl(2)Cr(4-pic)(2) and trans-(silox)(2)Cr(4-pic)(x) (n = 2, 3; 3, 3-4-pic). Chromous centers in 1 were antiferromagnetically coupled, and density functional calculations on the high-spin (multiplicity = 17) model [Cr(mu-Cl)(mu-OH)](4) (1') revealed that its singly occupied 3d orbitals spanned an energy range of approximately 2 eV. The addition of 8 equiv of Na(silox) to 1 yielded [((t)Bu(3)SiO)Cr(mu-OSi(t)Bu(3))(2)]Na.C(6)H(6) (4, Y shaped, angle OCrO(Na) = 91.28(7) degrees), and treatment of 4 with dibenzo-18-crown-6 produced [(silox)(3)Cr][Na(dibenzo-18-crown-6)] (5, angle OCrO = approximately 120 degrees, (120 + alpha) degrees, (120 - alpha) degrees). Calculations of [((t)Bu(3)SiO)Cr(mu-OSi(t)Bu(3))(2)]Na (4') and Cr(silox)(3)(-) (5') provided reasonable matches with the experimental geometries (X-ray). The trigonal chromic derivative (silox)(3)Cr (6) was synthesized from CrCl(3)(THF)(3) for structural and calculational comparisons to the chromous derivatives.     

Coordination complexes of molybdenum with 3,6-di-tert-butylcatechol. Addition products of DMSO, pyridine N-oxide, and triphenylarsine oxide to the putative [MoVIO(3,6-DBCat)2] monomer and self-assembly of the chiral [(MoVIO(3,6-DBCat)2)4] square

Molybdenum complexes of 3,6-di-tert-butylcatechol have been prepared from the reaction between [Mo(CO)(6)] and 3,6-di-tert-butyl-1,2-benzoquinone. A putative "[MoO(3,6-DBCat)(2)]" monomer is assumed to form initially by reaction with trace quantities of oxygen. Condensation of the reaction mixture leads to the formation of oligomeric products, including the [(MoO(3,6-DBCat)(2))(4)] chiral square isolated by chromatographic separation. Molybdenum centers at the corner of the square are bridged by oxo ligands centered along edges. Four-fold and inversion crystallographic symmetry gives tetramers as either LambdaLambdaLambdaLambda or DeltaDeltaDeltaDelta isomers, and the crystal structure consists of parallel columns of squares with the same chirality. Addition of O-Subst (O-Subst = dmso, pyridine N-oxide, triphenylarsine oxide) ligands to [MoO(3,6-DBCat)(2)] occurs selectively to give cis-[MoO(O-Subst)(3,6-DBCat)(2)] products. All three addition complexes are fluxional in solution. The temperature-dependent stereodymanic behavior of [MoO(dmso)(3,6-DBCat)(2)] has been shown to occur via a trigonal prismatic intermediate (Bailar twist) that conserves the cis disposition of oxo and dmso ligands. Electrochemical and chemical reduction reactions have been investigated for [MoO(dmso)(3,6-DBCat)(2)] with interest in displacement of SMe(2) with formation of cis-[MoO(2)(3,6-DBCat)(2)](2-). Cyclic voltammetry shows an irreversible two-electron reduction for the complex at -0.852 V (vs Fc/Fc(+)). Chemical reduction using CoCp(2) was observed to give a product with an electronic spectrum that is generally associated with cis-[MoO(2)(Cat)(2)](2-) complexes. Structural characterization revealed that the product was [CoCp(2)][MoO(3,6-DBCat)(2)], possibly formed as the product of dmso displacement upon one-electron reduction of [MoO(dmso)(3,6-DBCat)(2)].     

Silylation, sulfidation, and benzene-1,2-dithiolate complexation reactions of oxo- and oxosulfidomolybdates(VI) and -tungstates(VI)

The synthesis and structures of two types of molecules are presented: [MVIO3 - nSn(OSiR2R')]1- (M = Mo, n = 0-3; M = W, n = 3) and [MVIO2(OSiR2R')(bdt)]1- (M = Mo, W; bdt = benzene-1,2-dithiolate). For both types, R2R' are Me3, Pri3, Ph3, Me2But and Ph2But. The complete series of oxo/sulfido/silyloxo molybdenum complexes has been prepared. Complexes with n = 0 are readily prepared by the silylation of Ag2MoO4 and sustain mono- or disulfidation with Ph3SiSH to form a species with n = 1 and n = 2, respectively. Complexes with n = 3 are accessible by the silylation of [MOS3]2-. Structures of the representative series members [MoO3(OSiPh2But)]1-, [MoO2S(OSiPh3)]1-, [MoOS2(OSiPri3)]1-, [MoS3(OSiPh2But)]1-, and also [WS3(OSiMe2But)]1-, all with tetrahedral stereochemistry, are presented. Benzene-1,2-dithiolate complexes are prepared by the reaction of [MoO3(OSiR2R')]1-with the dithiol or by the silylation of previously reported [MO3(bdt)]2-. The structures of [MoO2(OSiPh2But)(bdt)]1- and [WO2(OSiPri3)(bdt)]1- conform to square-pyramidal stereochemistry with an oxo ligand in the apical position. The role of these complexes in the preparation of site analogues of the xanthine oxidoreductase enzyme family is noted. The sulfidation reactions reported here point to the utility of Ph3SiSH and Pri3SiSH as reagents for MoVI-based oxo-for-sulfido conversions.     

Peroxomolybdate(VI)-citrate and -malate complex interconversions by pH-dependence. Synthetic, structural and spectroscopic studies

The reaction of potassium molybdate(VI) with biologically relevant ligands, citric and malic acids, in the presence of H2O2 was investigated for the effect of pH variations on the product pattern. That with citric acid led to the formation of the monomeric complex K4[MoO(O2)2(cit)].4H2O (1) in the pH range 7-9, and dimer K5[MoO(O2)(2-)(Hcit)H(Hcit)(O2)2OMo].6H2O (2) (H4cit = citric acid) at pH 3-6 through carboxylate-carboxylic acid hydrogen bonding. The relation with the previously identified K4[MoO3(cit)].2H2O (4) and K4[Mo2O5(Hcit)2].4H2O (5) were shown. These and other intermediates were shown to react in the pH range 3-6 to give a more stable species 2; the reaction sequence was demonstrated either by the protonation from 1 or the deprotonation of [MoO(O2)2(H2cit)](2-) (8). Evidence that 2 exists as a dimer in solution is presented. The reaction with (S)-malic acid afforded Delta-K(2n)[MoO(O2)2((S)-Hmal)]n.nH2O (3) (H3mal = malic acid) that was oxidized further to oxalato molybdate (11) by H2O2. The three complexes 1-3 were characterized by elemental analysis, UV, IR and NMR spectroscopies, in addition to the X-ray structural studies that show citrate and malate being coordinated as bidentate ligands via alpha-alkoxyl and alpha-carboxylate groups. The formation of these complexes is dictated by pH and their thermal stabilities varied with the coordinated hydroxycarboxylate ligands.     

Polymer-anchored peroxo compounds of vanadium(V) and molybdenum(VI): synthesis, stability, and their activities with alkaline phosphatase and catalase

We generated a series of new polymer-bound peroxo complexes of vanadium(V) and molybdenum(VI) of the type [VO(O(2))(2)(sulfonate)]-PSS [PSS = poly(sodium 4-styrene sulfonate)] (PV(3)), [V(2)O(2)(O(2))(4)(carboxylate)VO(O(2))(2)(sulfonate)]-PSSM [PSSM = poly(sodium styrene sulfonate-co-maleate)] (PV(4)), [Mo(2)O(2)(O(2))(4)(carboxylate)]-PA [PA = poly(sodium acrylate)] (PMo(1)), [MoO(O(2))(2)(carboxylate)]-PMA [PMA = poly(sodium methacrylate)] (PMo(2)), and [MoO(O(2))(2)(amide)]-PAm [PAm = poly(acrylamide)] (PMo(3)) by reacting V(2)O(5) (for PV(3) and PV(4)) or H(2)MoO(4) (for PMo(1), PMo(2), and PMo(3)) with H(2)O(2) and the respective water-soluble macromolecular ligand at pH 5-6. The compounds were characterized by elemental analysis (CHN and energy-dispersive X-ray spectroscopy), spectral studies (UV-vis, IR, (13)C NMR, (51)V NMR, and (95) Mo NMR), thermal (TGA) as well as scanning electron micrographs (SEM), and EDX analysis. It has been demonstrated that compounds retain their structural integrity in solutions of a wide range of pH values and are approximately 100 times weaker as substrate to the enzyme catalase relative to H(2)O(2), its natural substrate. The effect of the title compounds, along with previously reported compounds [V(2)O(2)(O(2))(4)(carboxylate)]-PA (PV(1)) and [VO(O(2))(2)(carboxylate)]-PMA (PV(2)) on rabbit intestine alkaline phosphatase (ALP) has been investigated and compared with the effect induced by the free diperoxometallates viz. Na[VO(O(2))(2)(H(2)O)] (DPV), [MoO(O(2))(2)(glycine)(H(2)O)] (DMo(1)), and [MoO(O(2))(2)(asparagine)(H(2)O)] (DMo(2)). It has been observed that although all the compounds tested are potent inhibitors of the enzyme, the polymer-bound and neat complexes act via distinct mechanisms. Each of the macromolecular compounds is a classical noncompetitive inhibitor of ALP. In contrast, the action of neat pV and heteroligand pMo compounds on the enzyme function is consistent with a mixed type of inhibition.     

Synthesis and properties of mononuclear and binuclear molybdenum complexes derived from bis(2-hydroxy-1-naphthaldehyde)oxaloyldihydrazone

The monomer molybdenum(VI) complex [MoO(2)(napoxlhH(2))].2H(2)O (1) has been synthesized from the reaction of MoO(2)(acac)(2) with bis(2-hydroxy-1-naphthaldehyde)oxaloyldihydrazone (napoxlhH(4)) in 1:1 molar ratio in ethanol under reflux. This complex on reaction with pyridine/3-picoline/4-picoline yielded the dimer molybdenum(VI) complexes [Mo(2)O(4)(napoxlhH(2))(2)(A)(2)].2H(2)O (A=py (2), 3-pic (3), 4-pic (4)), whereas reaction with isonicotinoylhydrazine (inhH(3)) and salicyloylhydrazine (sylshH(3)) lead to the reduction of the metal centre yielding monomeric molybdenum(V) complexes [Mo(napoxlhH(2))(hzid)].2H(2)O (where hzidH(3)=inhH(3) (5) and sylshH(3) (6)). The complexes have been characterized by elemental analyses, molecular weight determinations, molar conductance data, magnetic moment data, electronic, IR, ESR and (1)H NMR spectroscopic studies. The complexes (5) and (6) are paramagnetic to the extent of one unpaired electron. The electronic spectra of the complexes are dominated by strong charge transfer bands. In all of the complexes, the principal dihydrazone ligand has been suggested to coordinate to the metal centres in the anti-cis-configuration. The complexes (1), (5) and (6) are suggested to have six-coordinate octahedral stereochemistry around molybdenum(VI) and molybdenum(V) metal centres, respectively, while the complexes (2)-(4) are suggested to have eight coordinate dodecahedral stereochemistry around molybdenum(VI) metal centre.     

Ligand influences on copper molybdate networks: the structures and magnetism of [Cu(3,4'-bpy)MoO(4)], [Cu(3,3'-bpy)(0.5)MoO(4)], and [Cu(4,4'-bpy)(0.5)MoO(4)].1.5H(2)O

The reactions of a Cu(II) salt, MoO(3), and the appropriate bipyridine ligand yield a series of bimetallic oxides, [Cu(3,4'-bpy)MoO(4)] (1), [Cu(3,3'-bpy)(0.5)MoO(4)] (2), and [Cu(4,4'-bpy)(0.5)MoO(4)].1.5H(2)O (3.1.5H(2)O). The structures of 1-3 exhibit three-dimensional covalent frameworks, constructed from bimetallic oxide layers tethered by the dipodal organoimine ligands. However, the [CuMoO(4)] networks are quite distinct. For structure 1, the layer consists of corner-sharing [MoO(4)] tetrehedra and [CuN(2)O(3)] square pyramids, while the layer of 2 is constructed from [MoO(4)] tetrehedra and binuclear [Cu(2)O(6)N(2)] units of edge-sharing copper square pyramids. The oxide substructure of 3 consists of [MoO(4)] tetrahedra corner-sharing with tetranuclear clusters of edge-sharing [CuO(5)N] octahedra. Crystal data: C(10)H(8)N(2)O(4)CuMo (1), orthorhombic Pbca, a = 12.4823(6) A, b = 9.1699(4) A, c = 19.5647(9) A, V = 2239.4(1) A(3), Z = 8; C(5)H(4)NO(4)CuMo (2), triclinic P, a = 5.439(1) A, b = 6.814(1) A, c = 10.727(2) A, alpha = 73.909(4)(o), beta = 78.839(4)(o); gamma = 70.389(4)(o); V = 357.6(1) A(3), Z = 2; C(10)H(8)N(2)O(8)Cu(2)Mo(2).3H(2)O 3.1.5H(2)O, triclinic P, a = 7.4273(7) A, b = 9.2314(8) A, c = 13.880(1) A, alpha = 71.411(2)(o), beta = 88.528(2)(o), gamma = 73.650(2)(o), V = 863.4(1) A(3), Z = 2. The magnetic properties of 1-3 arise solely from the presence of the Cu(II) sites, but reflect the structural differences within the bimetallic oxide layers. Compound 1 exhibits magnetic behavior consistent with ferromagnetic chains which couple antiferromagnetically at low temperature. Compound 2 exhibits strong antiferromagnetic dimeric interactions, with the magnetic susceptibility data consistent with the Bleaney-Bowers equation. Similarly, the magnetic susceptibility of 3 is dominated by antiferromagnetic interactions, which may be modeled as a linear S = 1/2 Heisenberg tetramer.     

Electronic spectra and structures of d2 molybdenum-oxo complexes. Effects of structural distortions on orbital energies,two-electron terms,and the mixing of singlet and triplet states

Molybdenum-oxo ions of the type [Mo(IV)OL(4)Cl](+) (L = CNBu(t), PMe(3), (1)/(2)Me(2)PCH(2)CH(2)PMe(2)) have been studied by X-ray crystallography, vibrational spectroscopy, and polarized single-crystal electronic absorption spectroscopy (300 and ca. 20 K) in order to investigate the effects of the ancillary ligand geometry on the properties of the MotriplebondO bond. The idealized point symmetries of the [Mo(IV)OL(4)Cl](+) ions were established by X-ray crystallographic studies of the salts [MoO(CNBu(t)())(4)Cl][BPh(4)] (C(4)(v)), [MoO(dmpe)(2)Cl]Cl.5H(2)O (C(2)(v)), and [MoO(PMe(3))(4)Cl][PF(6)] (C(2)(v)()); the lower symmetries of the phosphine derivatives are the result of the steric properties of the phosphine ligands. The Motbd1;O stretching frequencies of these ions (948-959 cm(-)(1)) are essentially insensitive to the nature and geometry of the equatorial ligands. In contrast, the electronic absorption bands arising from the nominal d(xy)() --> d(xz), d(yz) (n --> pi(MoO)) ligand-field transition exhibit a large dependence on the geometry of the equatorial ligands. Specifically, the electronic spectrum of [MoO(CNBu(t)())(4)Cl](+) exhibits a single (1)[n --> pi(xz)(,)(yz)] band, whereas the spectra of both [MoO(dmpe)(2)Cl](+) and [MoO(PMe(3))(4)Cl](+) reveal separate (1)[n --> pi(xz)] and (1)[n --> pi(yz)] bands. A general theoretical model of the n --> pi state energies of structurally distorted d(2) M(triplebondE)L(4)X chromophores is developed in order to interpret the electronic spectra of the phosphine derivatives. Analysis of the n --> pi transition energies using this model indicates that the d(xz) and d(yz) pi(MotriplebondO) orbitals are nondegenerate for the C(2)(v)-symmetry ions and the n --> pi(xz) and n --> pi(yz) excited states are characterized by different two-electron terms. These effects lead to a significant redistribution of intensity between certain spin-allowed and spin-forbidden absorption bands. The applicability of this model to the excited states produced by delta --> pi and pi --> delta symmetry electronic transitions of other chromophores is discussed.     

Methanesulfonates of high-valent metals: syntheses and structural features of MoO2(CH3SO3)2, UO2(CH3SO3)2, ReO3(CH3SO3), VO(CH3SO3)2, and V2O3(CH3SO3)4 and their thermal decomposition under N2 and O2 atmosphere

Oxide methanesulfonates of Mo, U, Re, and V have been prepared by reaction of MoO(3), UO(2)(CH(3)COO)(2)·2H(2)O, Re(2)O(7)(H(2)O)(2), and V(2)O(5) with CH(3)SO(3)H or mixtures thereof with its anhydride. These compounds are the first examples of solvent-free oxide methanesulfonates of these elements. MoO(2)(CH(3)SO(3))(2) (Pbca, a=1487.05(4), b=752.55(2), c=1549.61(5) pm, V=1.73414(9) nm(3), Z=8) contains [MoO(2)] moieties connected by [CH(3)SO(3)] ions to form layers parallel to (100). UO(2)(CH(3)SO(3))(2) (P2(1)/c, a=1320.4(1), b=1014.41(6), c=1533.7(1) pm, β=112.80(1)°, V=1.8937(3) nm(3), Z=8) consists of linear UO(2)(2+) ions coordinated by five [CH(3)SO(3)] ions, forming a layer structure. VO(CH(3)SO(3))(2) (P2(1)/c, a=1136.5(1), b=869.87(7), c=915.5(1) pm, β=113.66(1)°, V=0.8290(2) nm(3), Z=4) contains [VO] units connected by methanesulfonate anions to form corrugated layers parallel to (100). In ReO(3)(CH(3)SO(3)) (P1, a=574.0(1), b=1279.6(3), c=1641.9(3) pm, α=102.08(2), β=96.11(2), γ=99.04(2)°, V=1.1523(4) nm(3), Z=8) a chain structure exhibiting infinite O-[ReO(2)]-O-[ReO(2)]-O chains is formed. Each [ReO(2)]-O-[ReO(2)] unit is coordinated by two bidentate [CH(3)SO(3)] ions. V(2)O(3)(CH(3)SO(3))(4) (I2/a, a=1645.2(3), b=583.1(1), c=1670.2(3) pm, β=102.58(3), V=1.5637(5) pm(3), Z=4) adopts a chain structure, too, but contains discrete [VO]-O-[VO] moieties, each coordinated by two bidentate [CH(3)SO(3)] ligands. Additional methanesulfonate ions connect the [V(2)O(3)] groups along [001]. Thermal decomposition of the compounds was monitored under N(2) and O(2) atmosphere by thermogravimetric/differential thermal analysis and XRD measurements. Under N(2) the decomposition proceeds with reduction of the metal leading to the oxides MoO(2), U(3)O(7), V(4)O(7), and VO(2); for MoO(2)(CH(3)SO(3))(2), a small amount of MoS(2) is formed. If the thermal decomposition is carried out in a atmosphere of O(2) the oxides MoO(3) and V(2)O(5) are formed.     

Theoretical studies of molybdenum peroxo complexes [MoOn(O2)3-n(OPH3)] as catalysts for olefin epoxidation

The equilibrium geometries of the molybdenum oxo/peroxo compounds MoOn(O2)3-n and the related complexes [MoOn(O2)3-n(OPH3)] and [MoOn(O2)3-n(OPH3)(H2O)] (n = 0-3) have been calculated using gradient-corrected density-functional theory at the B3LYP level. The structures of the peroxo complexes with ethylene ligands [MoOn(O2)3-n(C2H4)] and [MoOn(O2)3-n(OPH3)(C2H4)] (n = 1, 2) where ethylene is directly bonded to the metal have also been optimized. Calculations of the metal-ligand bond-dissociation energies show that the OPH3 ligand in [MoOn(O2)3-n(OPH3)] is much more strongly bound than the ethylene ligand in [MoOn(O2)3-n(C2H4)]. This makes the substitution of phosphane oxide by olefins in the epoxidation reaction unlikely. An energy-minimum structure is found for [MoO(O2)2(OPH3)(C2H4)], for which the dissociation of C2H4 is exothermic with D0 = -5.2 kcal/mol. The reaction energies for the perhydrolysis of the oxo complexes with H2O2 and the epoxidation of ethylene by the peroxo complexes have also been calculated. The peculiar stability of the diperoxo complex [MoO(O2)2(OPH3)(H2O)] can be explained with the reaction energies for the perhydrolysis of [MoOn(O2)3-n(OPH3)(H2O)]. The first perhydrolysis step yielding the monoperoxo complex is less exothermic than the second perhydrolysis reaction, but the further reaction with H2O2 yielding the unknown triperoxo complex is clearly endothermic. CDA analysis of the metal-ethylene bond shows that the binding interactions are mainly caused by charge donation from the ligand to the metal.     

Synthesis and spectral studies on heterobimetallic complexes of manganese and ruthenium derived from bis[N-(2-hydroxynaphthalen-1-yl)methylene]oxaloyldihydrazide

The complex [Mn(L)(H₂O)₂] [H₄L = bis[N-(2-hydroxynaphthalen-1-yl)methylene]-oxaloyldihydrazide] reacts with activated ruthenium(III) chloride in methanol in 1:1.2 M ratio under reflux resulting in heterobimetallic complex of the composition [Mn(L)(H₂O)₄RuCl₂]Cl. The complexes of the composition [Mn(L)(A)₄RuCl₂]Cl were obtained when the above reaction was carried out in presence of heterocyclic nitrogen bases(A) such as pyridine(py), 3-picoline(3-pic) and 4-picoline(4-pic). The molar conductance values for these complexes in DMF(N,N-dimethyl formamide) solution indicate their 1:1 electrolytic nature. Magnetic moment values suggest that these heterobimetallic complexes contain Mn(IV) and Ru(III) in the same structural unit. Electronic spectral studies suggest six coordinated metal ions in these complexes. IR spectra reveal that the H₄L ligand coordinates in its keto-form to Mn(IV) and Ru(III).     

Synthesis and characterization of heterobimetallic Ni(II)–Zn(II) complexes from bis(2-hydroxy-1 -naphthaldehyde)succinoyldihydrazone

Monometallic zinc(II) and nickel(II) complexes, [Zn(H₂nsh)(H₂O)] (1) and [Ni(H₂nsh)(H₂O)₂] (2), have been synthesized in methanol by template method from bis(2-hydroxy-1-naphthaldehyde)succinoyldihydrazone (H₄nsh). Reaction of monometallic complexes with alternate metal(II) acetates as a transmetallator in 1 : 3 molar ratio resulted in the formation of heterobimetallic complexes [NiZn(nsh)(A)₃] and [ZnNi(nsh)(A′)₂] (A = H₂O (3), py (4), 2-pic (5), 3-pic (6), 4-pic (7)), (A′ = H₂O (8), py (9), 2-pic (10), 3-pic (11), and 4-pic (12)). The complexes have been characterized by elemental analyzes, mass spectra, molar conductance, magnetic moments, electronic, EPR, and IR spectroscopies. All of the complexes are non-electrolytes. Monometallic zinc(II) is diamagnetic while monometallic nickel(II) complex and all heterobimetallic complexes are paramagnetic. The metal centers in heterobimetallic complexes are tethered by dihydrazone and naphthoxo bridging. Zinc(II) is square pyramidal; nickel(II) is six-coordinate distorted octahedral except [ZnNi(nsh)(A)₂], in which nickel(II) has square-pyramidal geometry. The displacement of metal center in monometallic complexes by metal ion has been observed in the resulting heterobimetallic complexes.     

Reactivity studies of oxo-Mo(IV) complexes containing potential hydrogen-bond acceptor/donor phenolate ligands

Reactivity studies of oxo-Mo(IV) complexes, Tp(iPr)MoO{2-OC(6)H(4)C(O)R-κ(2)O,O'} (R = Me, Et, OMe, OEt, OPh, NHPh), containing chelated hydrogen-bond donor/acceptor phenolate ligands are reported. Hydrolysis/oxidation of Tp(iPr)MoO(2-OC(6)H(4)CO(2)Ph-κ(2)O,O') in the presence of methanol yields tetranuclear [Tp(iPr)MoO(μ-O)(2)MoO](2)(μ-OMe)(2) (1), while condensation of Tp(iPr)MoO{2-OC(6)H(4)C(O)Me-κ(2)O,O'} and methylamine gives the chelated iminophenolate complex, Tp(iPr)MoO{2-OC(6)H(4)C(Me)NMe-κ(2)O,N} (2), rather than the aqua complex, Tp(iPr)MoO{2-OC(6)H(4)C(Me)NMe-κO}(OH(2)). The oxo-Mo(IV) complexes are readily oxidized by dioxygen or hydrogen peroxide to the corresponding cis-dioxo-Mo(VI) complexes, Tp(iPr)MoO(2){2-OC(6)H(4)C(O)R}; in addition, suitable one-electron oxidants, e.g., [FeCp(2)]BF(4) and [N(C(6)H(4)Br)(3)][SbCl(6)], oxidize the complexes to their EPR-active (g(iso) ≈ 1.942) molybdenyl counterparts (3, 4). Molybdenyl complexes such as Tp(iPr)MoOCl{2-OC(6)H(4)C(O)R} (5) and Tp(iPr)MoOCl(2) also form when the complexes react with chlorinated solvents. The ester derivatives (R = OMe, OEt, OPh) react with propylene sulfide to form cis-oxosulfido-Mo(VI) complexes, Tp(iPr)MoOS{2-OC(6)H(4)C(O)R}, that crystallize as dimeric μ-disulfido-Mo(V) species, [Tp(iPr)MoO{2-OC(6)H(4)C(O)R}](2)(μ-S(2)) (6-8). The crystal structures of [Tp(iPr)MoO(μ-O)(2)MoO](2)(μ-OMe)(2), Tp(iPr)MoO{2-OC(6)H(4)C(Me)NMe}, Tp(iPr)MoOCl{2-OC(6)H(4)C(O)NHPh}·{2-HOC(6)H(4)C(O)NHPh}, and [Tp(iPr)MoO{2-OC(6)H(4)C(O)R}](2)(μ-S(2)) (R = OMe, OEt) are reported.     

A new class of sulfido/oxo(dithiolene)-molybdenum(IV) complexes derived from sulfido/oxo-bis(tetrasulfido)molybdenum(IV) anions

Mono(dithiolene)sulfidomolybdenum(IV) complexes, [MoS(S4)(bdt)](2-) (2) and [MoS(S4)(bdtCl2)](2-) (3) (1,2-benzenedithiolate = bdt, 3,6-dichloro-1,2-benzenedithiolate = bdtCl2), were prepared by the substitution reaction of a tetrasulfido ligand in known [MoS(S4)2](2-) (1) with the corresponding dithiol. Complexes 2 and 3 were irreversibly oxidized to give bis(mu-sulfido) dimolybdenum(V) species, {[MoS(bdt)]2(mu-S)2}(2-) (4) and {[MoS(bdtCl2)]2(mu-S)2}(2-) (5), in aerobic acetonitrile. Mono(dithiolene)oxomolybdenum(IV) complexes, [MoO(S4)(bdt)](2-) (7) and [MoO(S4)(bdtCl2)](2-) (8), that are oxo derivatives of 2 and 3 were also synthesized from a known [MoO(S4)2](2-) (6) of an oxo derivative of 1 and the corresponding dithiol. Further, the electrophilic addition of dimethyl acetylenedicarboxylate to 7 gave [MoO(bdt)(S2C2(COOMe)2)](2-) (9), and ligand substitution of the tetrasulfido group of 7 with bdt and bdtCl2 yielded [MoO(bdt)2](2-) ( 10) and [MoO(bdt)(bdtCl2)](2-) (11), respectively. New sulfido/oxo molybdenum complexes were characterized by (1)H NMR, IR, ESI-MS, Raman, and UV-vis spectroscopies; cyclic voltammetry; and elemental analysis, and crystal structures of 2, 3, 5, 7, and 8 were determined by X-ray analysis.